Installing Windows 2008 Server on Intel Raid (MEGAIDE)

I am facing the intolerable issue of trying to install Windows 2008 Server on a machine that has 2 drives configured for mirroring using the Intel RAID settings in the bios. (MEGAIDE)
In Windows 2003 you faced the dubious task of having to do the F6 to install the 3rd party RAID drivers.
In Windwos 2008 Server, you are able to load the drivers on a memory stick and browse the drivers.
I downloaded the drivers for Windows 2003 Server since there are no drivers posted for 2008 from the Intel website.
http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2162&OSFullName=Windows+Server*+2003+Enterprise+x64+Edition&lang=eng&strOSs=111&submit=Go%21
The installer recognized them when I browsed the media, but they did not load.
Any suggestions would be appreciated.
Thanks,
Mark

Hi,
I have the SE7230NH1-E Intel motherboard and it finnaly work for me using the driver from Asus but for motherboard.
P5BV-C/4L
http://ca.asus.com/fr/Server_Workstation/Server_Motherboards/P5BVC4L/#download
Version 4.4.0208.2008
Description
ICH7R LSI RAID Driver
LSI Embedded MegaIDE Driver V4.4.0208.2008 for Windows Server 2008 32/64 bit.

Similar Messages

Install windows 2008 server r2 as a vm on windows 8.1 pro

I am trying to install windows 2008 server r2 as a vm on an asus I7 4th gen. on windows 8 pro. It goes
thru the install untill completing install and gives error the computer restarted unexpectedly or encountered an unxpexted error windows installation cannot proceed click ok to restart. I do the shift f10 and change the registery to force finsh the install.
It boots up but when I try to do anything. It goes into netio.sys BSOD issue

I haven't run into that problem, but when setting up the OS, just
remove the NIC from the settings, do the install, make sure it's running, then install the integration
services, reboot, then add the NIC back in.
You could also use a legacy network adapter if that doesn't work.
In any case I'm trying an install of Win2008R2 right now so I can see if I get the same problem...
Bob Comer Microsoft MVP -- Hyper-V

Cannot Install Windows 2008 Server on IdeaCentre K330

Hi,
when i trying to install the Windows 2008 R2 i see blue screen when it reboots. Does anybody have the same experience?
How to fix it?
Thanks!
Solved!
Go to Solution.

I resolved it: issue was with media, with DVD, which caused BSOD. New DVD resolved the issue.
However: I've got a pretty serious issue with integrated network card, WinServer 2008R2 was not able to identify it and whatever driver i've got (from Intel or Lenovo, this is Intel 82579V chipset), it didn't work.
After researching i finally found the solution and hope it will help for somebody else. What i did:
- I launched autorun.exe from drivers DVD from Lenovo and identified what next executable it run (to install LAN drivers). It was 11002049.exe. It basically extracts LAN drivers, when i run it from console it showed that it couldn't expand files on DVD
- then I copied whole dvd to the hard drive and run this executable: it extracted files on the same folder
- then i navigated to ~/your DVD/PRO1000/Winx64NDIS62
- then i opened the file: e1c62x64.INF and updated it like i guy from other forum said:
The dirty details: e1c62x64.INF is the file [Intel] [Intel.NTamd64.6.1] <--- remove the second .1 here so it looks like this ; DisplayName Section DeviceID ; ----------- ------- -------- %E1502NC.DeviceDesc% = E1502.6.1.1, PCI\VEN_8086&DEV_1502 %E1502NC.DeviceDesc% = E1502.6.1.1, PCI\VEN_8086&DEV_1502&SUBSYS_00011179 %E1503NC.DeviceDesc% = E1503.6.1.1, PCI\VEN_8086&DEV_1503 %E1503NC.DeviceDesc% = E1503.6.1.1, PCI\VEN_8086&DEV_1503&SUBSYS_00011179 and then the above sections will be visible to the 2k8 inf parser.
- After that i navigated to the Hardware/Devices and Printers/selected the troubled unidentified LAN device and selected "Update Driver", navigated to the path where i updated the mentioned inf file and driver was installed SUCCESSFULLY!

Installing Windows 2008 Server on T500

Hi, I am considering installing Windows server 2008 on my T500, but was a bit concerend about driver support and compatibility.
Has anyone else tried this?
Thanks
David

The fingerprint software doesn't work on my T400 with Server 2008 ! Authentec reader.

Windows 2008 server with a Z77A-GD65 m/b?

Hi,
I picked up a Z77A-GD65 last evening assuming I could install Windows 2008 server on it. Upon trying, the install DVD doesn't even see the hard drives.
Any suggestions? Is this m/b not compatible with Win 2008 servers?
Thanks!
--Ben

Try loading the AHCI drivers just like you would raid drivers.
(Intel Rapid Storage Drivers)
http://www.msi.com/product/mb/Z77A-GD65.html#/?div=Driver&os=Win7%2064
If you are trying to use SATA_7 or SATA_8 you will need to load the AS Media controller drivers:

Looking for T61 Drivers to support Windows 2008 Server

Hello:
I recently bought a T61 that came with Vista Ultimate. I ventured into installing Windows 2008 Server on it.
I have been almost successful in my attempt. The machine does operate and I was able to use the Vista drivers to configure the components.
I compare the Device Listings under Vista and under Server 2008 and I see the following missing components:
Bluetooth Radios
    Microsoft Bluetooth Enumerator
Disk drives
    IMD-0
Human Interface Devices
    Bluetooth Remote Control
    HD-compliant consumer control device
IDE ATA/ATAPI controllers
    IDE Channel
Monitors
    ThinkPad Display 1440x900 (mine says Generic PnP Monitor)
Network Adapters
    Bluetooth Device (Pesoanl Area Network)
    Bluetooth Device (RFCOMM Protocol TDI)
SM Driver
    SM Bus Service
System Devices
    UMBus Enumerator
The good news is that the laptop works fine as a Server. If I could resolve these missing components, it will be nice.
I searched through Google but I don't seem to have any luck identifying the drivers. And, of course Lenovo Technical Support said that they do not support that OS on this laptop even though I have proved them wrong!)
Can somebody advise me?
venki

Hello venki,
I have run server 2008 on my T61 7665-b68.
I have installed all Drivers for Vista 64 from Lenovo with systemupdate.
For the bluetooth installation look hier: http://capitalhead.com/articles/enable--install-microsoft-bluetooth-stack-on-windows-server-2008-x64...
regards
Sven
IBM T61 - 7665-B68 - 4GB RAM - 250GB HD - 1,8 GHz T7100 - 14,1" Display -1440x900 Intel 4965 a/g/n WLAN - DVDRW Multidrive III - Bluetooth 2.0 - Fingerprint

T400s and Windows 2008 Server - Network card

I have installed Windows 2008 Server Enterprise edition on T400s. I cannot get network card to work, or wirless. I tried drivers for Win 7 and Vista. Are there any drivers for 2008 Server, or workaround?

Partially solved the problem for wirlesss connectivity:
1. Downloaded drivers from Intel site for Intel Wireless 5300 card
2. Enabled wireless setting on Win 2008 through features option

Windows 2008 Server on Sunfire V20z Server

I am looking to install Windows 2008 Server (Standard Edition) on a retired Sunfire V20z server. The box is totally raw - i.e. new drives with no OS. The problem is that the Win2008 install disc is a DVD and the V20z only has a CD-ROM drive. I purchased an external DVD USB drive, but the BIOS does not support booting from the USB. I'm thinking updating the BIOS to version 1.35.3.2, but I can't find any documentation that it even supports USB booting.
Anyone have any ideas on how I can install Win2008 server on this raw box?

Depending on what other resources you have to hand I'd use one of the following approaches. Note: I don't have a V20z but the following approach has worked on other machines which had no DVD drive.
Open the box and temporarily connect a slimline IDE DVD-ROM in lieu of the built in CDROM. I've found that while there is often a proprietary interface on the M/B the connection at the drive end can normally be dismantled and connected to another drive. I use one salvaged from an IBM P3 based Netvista.
or
Download the Microsoft WAIK and generate a Windows PE CDROM. Insert that into the CD drive and place the Windows 2008 DVD in the USB DVD drive. Boot the machine from the CD and then launch the Windows setup program from the USB DVD. The process for creating the Windows PE CDROM is straightforward and is covered in the Windows PE User's Guide as provided in the WAIK but here are the steps.
Launch the Deployment Tools Command Prompt and run the following commands ( for amd64 )
copype amd64 C:\winpe_amd64
copy c:\winpe_amd64\winpe.wim c:\winpe_amd64\ISO\sources\boot.wim
oscdimg -n -bC:\winpe_amd64\etfsboot.com C:\winpe_amd64\ISO C:\winpe_amd64\winpe_amd64.iso
Burn the resulting ISO to a CD.

Windows 2008 Server Std on T500

Hi. Is there anyway to install Windows 2008 Server Std. on a T500 with Windows 7 installed? We've tried to install it and the drivers are all screwed up -- the network, video, and other "base" drivers are all missing. We tried using the Vista and XP ethernet adapter drivers and it wouldn't take them.
Has anyone done this successfully? Any instructions anywhere? Thanks.

Hi Gerem..
please, have you resolved your problem, ? ru still using 2008 R2 ?
I need soem suggestion and help, iam planing to buy New 15" MBP non retina 2012 model,
i want to install 64-bit 2008 R2 as i have some Active directory DNS setup,
will it support to install via boot camp,
can we install with out bootcamp ? i mean Directly by partition the HDD ?
i dont want to use R2 in mac osx by parllels or Vmware !!
i amt to use full my Hardware 16GB and Quadcore,
can you guide me how to avhive me Thanks a lot !!

Windows 2008 Server, M93P Drivers

We recently purchaced a M93P for server, we installed windows 2008 server on it and there are 6 drivers missing. I've searched for then on the Lenovo website with little luck. Does anyone know where I can find drivers for the following
Ethernet Controller
PCI Serial Bus
PCI Simple Communications Controller
SM Bus Controller
US Controller
And there's an unknown device, listed as ACPI\LEN4001
Thanks for the help.
-Kallie

Is it possible that I could have a copy of WS 2008 64-bit from you?
Thanks,

How to install a plugin on 64 bits windows 2008 server?

From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)

Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
Farid

Hi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet

Windows 2008 Server R2 - Service Pack 1 Failed to install

A few nights ago I deployed Service Pack 1 for Windows 2008 Server R2 x64. The update failed to install after 3 attempts using the Windows Update manager. After the third time I checked the system properties which states that SP1 is
installed, yet it never appeared to install successfully as my other server machine had a prompt stating the SP was installed successfully.
In update history it shows the 3 failed attempts with no successes. This morning I began running into memory errors which are impacting my 2 VM Ware sessions which in turn lock up my virtual machine so I am going to attempt to remove and reinstall
to see if this corrects my issue. By the way what triggered the install of SP1 is random reboots of my server. This is that unknown Kernal Power Error which I have yet to resolve. Some months my server randomly reboots one time and other
months 4-5x. That is neither here nor there, the point of this discussion is to resolve SP1.
I have tried to remove SP1 by means of Control Panel, Programs and Features, Installed Updates. So it shows the that the SP1 installed in multiple areas yet in the install history no signs of successful installation.
When trying to uninstall from Program and Features/Installed Updates section in control panel it cycles through like its going to uninstall, but after several minutes I receive the following error      Windows Update
An error has occurred. Not all of the updates were successfully uninstalled.
When trying to uninstall from the command prompt (as administrator) "wusa.exe /uninstall /kb:976932" I get the following popup            Windows Update Standalone Installer
Installer encountered an error: 0x80073712       The component store has been corrupted.
Now if I try and install through the network installer file name "windows6.1-KB976932-X64.exe" I get "Windows Server 2008 R2 Service Pack 1 is already installed"
I performed these steps in the order mentioned which I came across this "System Update Readiness Tool for Windows Server 2008 R2 x64 Edition (KB947821) [February 2011]" After applying this hotfix I went through the same steps as mentioned above with the
exact same results.
It is unfortuante I did not come across this hotfix before I attempted install SP1 as it appears as if this would have prepared the system for SP1 installation. Currently I am in limbo with a corrupt installation of SP1 and so far no means of uninstalling
short of a reinstallation or repair of the OS which I am not willing to do at this point in time.
If anyone has any suggestions please chime in and let me know what I can try. Thanks for all the support and hopefully this post will help others in the future.

Maybe a little bit late, but I was running almost same problem on a exchange server.
Scenario:
First attempt to Update the windows patches - excluded the patches from the last 2 months.
I was kind a new to this, and didnt noticed that Windows Service pack must have at least 8GB free disk space.(Recommended)
So the C:\ partition had less then 5 GB free disk space, and I started the updates.
All went well until Windows SP1 begun running to downloading and installing.
When the installer noticed there wasnt enough space, It stopped, it give the status Failed, en when scaling up the C:\partition with another 10GB more space, the C:\partition had 18GB free disk space.
Tried to Call up a new attemp to install the SP1... but with no succes to start the SP1 installation...
I tried to reinstall but the windows update didnt get offered again to install again or resume or anything to try again...
Maybe...it is handy for Mickysoft, to check before installing, so the install wont get corrupted, and can install when c:\ partition has enough disk space.
What was the trick:
1) Stop the windows Update Service
2) C:\Windows\SoftwareDistribution\DataStore - Delete content
3) C:\Windows\SoftwareDistribution\Download - Delete content
4) Windows update Service check if its runs again
5) Check again for windows updates - Check if Windows Server Service pack 1 is offered, and install reboot and youre good to go.
It works for me :) hopefully after 3 years you had found a solution, but since I was poping for a solution and found this article with no solution.
I tought it will be hopefull for others to respond to this article with a solution.
Kind regards,
Alexander Tjintjelaar
Micky soft noob

How to install EBS 11.5.10.2 on windows 2008 Server

Hi All,
I need to install 11i (11.5.10.2) on a windows 2008 server sp2 machine. I'm using perl 5.8.9 but running perl adautostg.pl returns this error:
Perl lib version (v5.6.1) doesn't match executable version (v5.8.9) at c:\oracle\VIS\apps\tech_st\10.1.2\perl\5.6.1\lib\
MSWin32-x86/Config.pm line 21.
Compilation failed in require at adautostg.pl line 43.
BEGIN failed--compilation aborted at adautostg.pl line 43.
The documentation says:
You must have perl 5.0053 or higher installed...
What am I missing here?
Thanks,
Konrad
Edited by: Konrad on 15.12.2010 17:11

See note 986762.1 General Notes For E-Business Suite Release 11i
Installation.
* For 11i new installations: Using the Rapid Install, install all tiers (including the database tier) on a Supported Applications Platform. Then, migrate the database to the "Split Configuration Database Tier" platform.
9iR2 database to an Itanium or x86-64 database server, review "Using Oracle E-Business Suite with a Split Configuration Database Tier on Oracle 9i Release 2", Metalink Document 304489.1.
login to support.oracle.com
Oracle Application Install 11.5.10.2 (11i) Microsoft Windows (32-bit) 2008Oracle Server - Enterprise Edition / 11gR2 Certified
select cerification tab--> Oracle E-Business Suit --> Application Technology -->Lifecycle Managemement
All Products > Oracle E-Business Suite > Applications Technology > Lifecycle Management > Oracle Application Install
Then select
All Platform/Versions > Microsoft Windows (32-bit)
All Release/Versions > 11i (Application Install)
All Platform/Versions > Microsoft Windows (32-bit) > 2008
you can find all certifications.

CF9 install on Windows 2008 Server R2

Hi everyone I've installed Cold Fusion 9 on my windows 2008 Server r2 box and everything appears to be configured correctly becuase I can get to the Cold Fusion 9 Administrator page just fine. I've looked within IIS 7.5 and it's recognizing the .cfm file I think becuase it's an option under default documents. However I try to view the file from the local host I get a error 500.0.
Module
IsapiModule
Notification
ExecuteRequestHandler
Handler
AboMapperCustom-77246
Error Code
0x800700c1
I have no idea what that mapper is or what it's supposed to do so if anyone could help me out I would be eternally grateful! Why oh why couldnt cold fusion 9 have native IIS support in it.
UPDATE
Apparently this error 500.0 gets applied to all my sites within IIS 7.5. Not just the one I intend to use .cfm files on. When I go into the web configuration tool and remove the configured webservers and restart everything goes back to normal but the .cfm files throw a 404.3 not found error for the following module.
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032

Hi
Windows Server Core edition is not listed as supported platform:
http://www.adobe.com/products/coldfusion/systemreqs/
HTH, Carl.

Installing Windows 2008 Server on Intel Raid (MEGAIDE)

Similar Messages

Maybe you are looking for