Installing Windows 7 64-bit - DVD won't boot

I recently downloaded the 64-bit version of Windows 7 from my school's MSDNAA page and burnt the ISO to a DVD. I had XP on a dual-boot setup to actually get the download, so I deleted the partition and decided to start fresh for Windows 7. When I went through the boot camp assistant it wouldn't boot from the DVD. If I use a program like rEFIt I can see the 'bootmgr.efi' as a volume to boot from, but when selected it gives me the error "Unsupported while loading bootmgr.efi". Has anyone else come across anything like this? Thanks in advance for your help!

Hey,
I had problems when trying to install Windows 7 64-bit from a disk burned from an iso.
If you still have the iso file follow the instructions on this page - http://www.gopulls.com/blog/2009.08.26/install-windows-7-x64-on-a-mac-beat-the-s elect-cd-rom-boot-type-error/
or this page - http://discussions.apple.com/thread.jspa?threadID=2372797&tstart=45
Apparently the issue is something to do with the fact that the install disk has two boot sectors instead of one...this thread explains it better - http://discussions.apple.com/thread.jspa?threadID=1867336
Hopefully it will work for you as it did for me!
ebs

Similar Messages

Problem installing windows 8.1 64bit, won´t boot

Hello there good people.
Let me first tell you that I am really novice with computers so please bear with me.
Z87-G45 Gaming motherboard
i7-4770k CPU
Kingston SSDNow V300 120gb SSD
Crucial DDR3 BallistiX Sport 1600MHz 8GB RAM
MSI GeForce GTX 780 Gaming 3GB PhysX
Speedplus+ Superwritemaster CD/DVD
So I tried to install Windows 8.1 from DVD. BIOS recognize both my DVD and SDD and I have changed the boot priority, AHCI mode but still when I reboot I get the message "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key"
I have changed Sata cables and tried different SATA ports in the motherboard with no luck.
Have you guys any suggestions?
Have a good one

Try hitting f11 on boot and selecting the dvd drive. If it won't work you may need to exit win 8 mode or move the windows files to a usb drive.
I have found that if trying to install in win 8 mode, you often need to transfer the install files to a usb stick. Then boot from that.

Leopard DVD won't boot after bad install

I ran the leopard installation yesterday and I realized that i needed to do some more work on the drive before i installed, so i clicke cancel and restarted the computer. Now the dvd won't boot. I installed tiger again(came with laptop) and tried doing various other things with the disk. Almost any ntensive use of the disk (booting from it, trying to clone it, etc.) will result in the superdrive powering up and then down repeatedly, sans result. I left the leopard dvd to boot for hours and when it tries it gets to the grey logo and the drive does that power up/down cycle endlessly. I can boot from ubuntu's disk and the tiger disk that came with my computer. The disk mounts to the desktop, btw, and i can browse the files and everything. Apple support was no help.

I've been doing some work with the disk. I did another attempt at creating a dmg from it and got the same result, so I googled the error which led me to a thread on this site with a similar issue. The error was input/output error. They found that it was due to a corrupt file... so I did a cp -r of the disk and it said that a few files did not exist:
cp -r "Mac OS X Install DVD" /Users/mattebooks/Desktop/Leopard
cp: Mac OS X Install DVD/usr/lib/libpython.dylib: No such file or directory
cp: Mac OS X Install DVD/usr/lib/libpython2.5.dylib: No such file or directory
cp: Mac OS X Install DVD/usr/lib/libpython2.dylib: No such file or directory
cp: Mac OS X Install DVD/usr/lib/libruby.1.dylib: No such file or directory
cp: Mac OS X Install DVD/usr/lib/libruby.dylib: No such file or directory
cp: Mac OS X Install DVD/usr/lib/libtcl.dylib: No such file or directory
cp: Mac OS X Install DVD/usr/lib/libtcl8.4.dylib: No such file or directory
cp: Mac OS X Install DVD/usr/lib/libtk.dylib: No such file or directory
cp: Mac OS X Install DVD/usr/lib/libtk8.4.dylib: No such file or directory
So I set Finder to show hidden files and went to these files libpython and libpython2.5 are aliases of libpython2 and libpython2 is an alias of a file in a non-existing folder. A little more digging and I find out that the python, ruby, tcl and tk framework folders are all missing, all from the same folder... interesting. Maybe I could add the files in and reburn the disk. My guess is that the loader looks for these files repeatedly. The path to the files is /System/Library/Frameworks/... If anyone could email these to me I could try and rebuild the disk...

Satellite A105-S3611 Recovery DVD won't boot - reverts to HDD boot

Satellite A105-S3611 Recovery DVD won't boot - reverts to HDD boot.
My laptop has had a virus but is now clean but has some lingering effects. So I decided to use the Recovery and Applications/Drivers Media to reinstall the system to factory settings. Pressing the "C" key at the Toshiba screen did not work to choose the boot divice but pressing F12 did work. The problem is the system still boots using the hard disk. I've gone into the boot process and changed the order of boot devices to make sure the CD\DVD drive is chosen first but it does not boot from the CD/DVD. It looks like it begins to read the DVD but the boot process is not executed from there.
Questions:
1. Can I install the system using windows explorer to execute the autorun.ini on the CD/DVD?
2. Is there another option for getting the system to install from the CD/DVD?
Thank you in advance
Roger

I read somewhere on the forum that updating the BIOS may solve the problem. So I updated the system BIOS from v1.40 to v2.0. Then I reinserted the newly purchased recovery DVD and the boot process began with the DVD booting but ended with the message "WRONG MACHINE".
I ejected the recovery DVD that I just purchased and inserted the recovery DVD that came with the machine. This time the machine booted and installed the factory image of the operating system as it should have the first time.
So I am now recovered and the machine works as it did originally. So the moral of the story is you don't necessarily have to buy the new recovery DVD but just update the system BIOS and then try to use the recovery DVD that came with your machine.

I am trying to install windows 8 at my macbook air boot camp

I am trying to install windows 8 at my macbook air boot camp but Boot Camp Assistant i showing an error that the disk cannot be portioned because some files cannot be moved. Back up the disc and use disk utility to format it was a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistant Again.
I had already installed teh first time Windows on my MacBook Air and Mac Book Pro. Actually I had more issues to install on the pro than Air.
But my Macbook Air had an issue on November 2013, 3 weeks after buying it and Apple gave me a new MacBook Air but they only transferred the information on my mac and the windows partion was lost according to them, they could copy it in to my new MacBook Air. Now that I am trying to install my windows I can not access to the aprtion section and get the error message from above.
What can I do to to install it? I am using a 32GB USB and OEM Windows 8 at USB External Drive. The same I used before. I dont know understand what changed if I did it before?
Please advise..

I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
open disk utility, confirm that you only have 1 partition (mac journaled)
restart and PRAM reset
open disk utility and repair permissions twice
restart boot camp assistant
Does it work?
If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed.

Can i install windows 8 on my mbpr using boot camp assistant?

can i install windows 8 on my mbpr using boot camp assistant?
pls help

Go to the Bootcamp forum where the Bootcamp gurus hang out. https://discussions.apple.com/community/windows_software/boot_camp

TS3173 i created a windows partition that was too small and cant install windows... how can I boot on my mac drive to correct this... my computer is defaulting to the windows partion... tried f1 f7 f12... Help

i created a windows partition that was too small and cant install windows... how can I boot on my mac drive to correct this... my computer is defaulting to the windows partion... tried f1 f7 f12... Help

Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the "OPTION" key.
3. Release the key when the boot manager appears.
4. Select your OS X disk.
5. Click on the arrow button below the icon.

I'm trying to install Windows 7 on my MacBook with Boot Camp Assistant

I'm trying to use Boot Camp assistant to install Windows 7. I have a disk, I've done everything right, but for some reason, whenever I click Install on the final Boot Camp prompt, it only gets as far as the Windows is loading files... part after it reboots to the Windows hard drive. I've tried everything, but it still won't work. Im using a 13" MacBook Pro with Retina. It has the latest software version (OS X 10.9.1) and I have a USB with Windows Support Software. The disk is Windows 7 Home Premium 64-bit.
I've been trying for the last two days, and I really need help!
Thanks.

I solved my own problem. I just kept trying, and eventually it worked!

It's impossible to install Windows 64 Bits on my Macbook Pro, why?

Hey everybody,
I was tryng for three days to install Windows (8 and 7 after) 64 bits version on my Macbook Pro and I can tell you that It's impossible...
It's doesnt matter what I do, the PC does not recognize the bootable disk or usb for Windows.
I followed these steps:
- I downloaded the Windows 7 official ISO image to burn a DVD Setup after use the Boot Camp Assistant.
- When I used the Boot Camp Assistant, I tried to "Download the latests Windows support software from Apple" but 2 minutes after I chose that option, the assistant alert me that the Server doesn't have the files anymore... so I had to simply use the install option BUT it requires that I put the Windows Installation CD on my PC and when I put it on it... the PC doesnt recognize it! My "solution": I mount a Virtual Drive with the ISO image of the DVD and now my Mac recognize the Installation CD so I can continue with the installation...
- After that the PC was restarted and thats the last step that I reach because when It's tryng to start with the Installation Drive it's doesn't recognize... again!! A black screen appears with a text that say "Insert a bootable drive and press any key"... or something like that.
So I'm stuck in this step because I was tryng to use another Installation CDs, burning it again and again, tryng with Windows 8 too and nothing happens.
I tried to make an USB Bootable too but my Boot Camp Assistant doesnt have any option to make it (I read that some macbooks have an a 3rd option in his Boot Camp Assistant that prepare a USB with the ISO of any Windows Installation CD) so obviously whitout it was completely useless.
I was tryng to make a bootable dvd with UDF format (cause I read that if the cd is not in that format It doesnt be recognize in Mac as a bootable drive...).
What can I do? I know that Windows 32 Bits Systems run on my Mac but It should support 64 Bits Systems too (I was reading the compatibility of Boot Camp and Windows versions and It should run!).
Please help me
My Macbook Model is:
Macbook Pro 13-inch, Mid 2010
Processor 2,4 GHz Intel Core 2 Duo
Memory 4 GB 1067 Mhz DDR3
Graphics NVIDIA GeForce 320M 256MB
Software: OS X 10.9.2 (13C1021)
Boot Camp Version: 5.1.2 (481)

you can just download the bootcamp drivers manually
http://www.apple.com/dk/support/bootcamp/
and you can't
: I mount a Virtual Drive with the ISO image of the DVD
bootloader time nothing can read virtual drives you need a real dvd with the iso burned on it or to do the usb install way
have you tried to view some of the tons of youtube guides which show you step by step how to install windows on bootcamp ?
https://www.google.dk/search?q=installing+windows+on+bootcamp&oq=installing+wind ows+on+boo&aqs=chrome.2.69i57j0l5.11252j0j7&sourceid=chrome&es_sm=91&ie=UTF-8#q= installing+windows+on+bootcamp&tbm=vid

Lenovo G50-30 - "No Bootable Device" error message when trying to install windows 7 via DVD-ROM.

Hi all, Recently purchased a Lenovo G50-30 as a birthday present. After recieving the laptop, I tried putting a fresh install of Windows 7 64 Bit onto it. After changing the BIOS settings to allow legacy booting from the DVD drive and changing OS Settings to Win 7, I noticed I was getting an error reading "No Bottable Device -- Insert boot disk and press any key". After googling for a few hours on how to fix this I am still stumped and nothing seems to work. Has anyone had a similar issue or would know how to fix this?

Hi omegafeggy,
Welcome to Lenovo Community Forums!
Im kind of confused with the sequence.
Have you installed Windows 7 first then change the BIOS or You changed the BIOS first then Load Windows 7.
Thanks
Solid Cruver

Boot Camp not installing Windows 7 - "No bootable device, insert boot disk and press any key."

I need some help with something. A while back, I put a brand new hard drive in my MacBook, a 500 GB model to replace the 120 GB one. I cloned everything successfully to the new drive via Carbon Copy Cloner, but now I want to make a Boot Camp partition on the drive. The SuperDrive in it is defective, so I use an external FireWire drive. So far the Boot Camp Assistant in 10.7 Lion works fine in creating the partition, but when it gets to the part where it tries to boot into the Windows installation disk (32-bit Windows 7 Home Premium, or could the 64-bit work fine as well?), it shows a black scree nwith "No bootable device, insert boot disk and press any key." I try pressing keys, but nothing happens.
I also tried using rEFIt, but that didn't work out either.
Here are the specifications of my machine...
MacBook (Early 2009 model)
2.0 GHz Intel Core 2 Duo processor
4 GB of RAM
500 GB SATA hard drive
Dual-layer SuperDrive (defective, may replace it once I have the cash)
NVIDIA GeForce 9400M graphics chip
Mac OS X 10.7.2 Lion
Can anyone help me out with this? Is there some sort of workaround?

Wiley207 wrote:
Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
Were you doing any of the special workarounds with refedit etc?
What model USB DVD drive?

How should I proceed with installing Windows on my Macbook Pro through Boot Camp?

Hello,
I have never installed Windows on a Mac. I found the official guidebook from Apple online, but I want to make sure I am buying the right type of Windows before I get it. So should I get 32 Bit or 64 Bit Windows 7? What other major things should I keep in mind as I'm getting ready to install Windows? I have made a Time Machine backup for my computer on an external hard drive. I want to make sure that I am not leaving out anything major in terms of how I should prepare for the process. I have Mac OS X 10.9.2, if the version is significant. Let me know what other info you need about my computer if you need any.
Thank you.

Boot Camp- Frequently asked questions about installing Windows 8
Mac Basics- Using Windows on your Mac with Boot Camp
Boot Camp 5.1- Frequently asked questions
Boot Camp- System requirements for Microsoft Windows operating systems
Boot Camp- Installing Windows 7 Frequently Asked Questions
10.8 Boot Camp Manual

Blank Black Screen installing Windows XP Pro SP2 Retail with Boot Camp

Hi Support Forum -
I am using BootCamp Assistant (3.0.2) to install WindowsXP_SP2_ProRetail on my MacBook Pro 15inch
Mid2009 (10.6.4) plus all the latest updates.
I have no problems creating partitions ranging from 5GB to more than half my HDD of 500GB....but
nothing but one problem when I get to Step 3 of the BootCamp Installation & Setup Guide, page 7:
To install Windows on your Mac computer:
1 a... Open Boot Camp Assistant
b... Select 'Start Windows installer'
c... Click Continue
2..... Insert your Windows installation disc
3..... In Boot Camp Assistant, click Start Installation
Your computer starts up from the Windows installation disc
That's as far as I get! First a Gong sound then the gray screen appears and afterwards the screen turns BLACK. After a short while the optical drive starts up and is quite active with either searching
or scanning back and forth for about 5 minutes. Then all activity stops and finally the computer stops
2 minutes later. Interestingly the keyboard was never lit and none of the keys responded to my de-
pressions. I also noticed the aluminum case near the display pivot edge get quite warm probably due
to the black screen so I decided to press the power-off key.
I restarted the computer and held the option key depressed, selected the Macintosh HD icon and pro-
ceeded to the Logs (system.log & the windowserver.log) for any entries about the windows installer
and the optical drive operations....Nothing, nothing! Then I checked the BootCamp HD with Finder,
nothing, -> 0 items were loaded!
I feel at a loss what to do next??? I even ran Techtooldeluxe diagnostic utility from AppleCare, every-
thing AOK!
Now I had Windows installed successfully when I first had bought my MBP 15 last year. Then I decided
to play around with Parallel Desktop 5, didn't like it and tried to return to Windows and ever since that
time I was not able to install Windows XP. I decided to reinstall OSX to Factory Conditions, did the
7-pass erase for secure delete, installed OSX again without any problems. But Windows still won't in-
stall, get that Blank Black Screen, no cursors!
Perhaps something slipped in with soft- or firmware upgrades for the Graphic/Display 'Nvidia GeForce
9400M that won't let windows installer function properly?
Just for kicks I reinstalled Parallel Desktop 5 and Win/XP installed without any problems.
The Apple Experts in CA couldn't help me either. Now I had hoped there might be a solution to this
problem at this time?!
I like my MBP very much and I might convert to OSX and it's applications if I can't get an answer to my
problem. I still don't like to give up though and would like to pursue this problem with more diagnostic aids from Tech Support. I know there a lot of OPEN incidents on this particular problem!
If this really is a Windows Installer failure, why does it work with Parallel Desktop 5, there is no BOOT
CAMP ASSISTANT!!!!
Hope I can get a solution soon from some brilliant expert out there!
Thanks for your patience,
Paul370

I know what are you talking about. It looks more like a video compatibility issue in Boot Camp like this one:
http://support.apple.com/kb/TS1454?viewlocale=en_US
I encountered something similar with a MacBook Pro and despite all searching, i couldn't find a solution. However i am not that expert you are searching for, just the average Mac user
*You may try another XP version, i was able to install a older XP home setup, and updated lately after installing :|*
I am interested myself in a solution from some brilliant expert out there! Keeping an eye on this thread.

Installed Windows & 32 Bit But Drivers and USB ports NOT WORKING.

I bugh an HP Pavillion TS 14 Notebook that came preinstall with Windows 8.1 64 bit which I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem. None of my network drivers work and the 2 uSB ports where I plug my mouse and other SB hardware in no longer work.
I did a back up of the SW Set up file that has all of the HP dvers for my laptop but both the network and video divers won't install. And When I try to install the drives I get the eror message saying they are not compatible with this version of Windows.
I have loked on the HP website under my laptop model which s as above but HP don't do drivers for Windows 7 32 for my laptop. And I have looked on both the Realteck website for both the Realteck ethnet and Realteck wireless network drivers but none of them work or install on my operating system. The video drivers Intel don't work either. So I am really stuck a I cannot go back to Windows 8.1 as though that 32 bit Windows 7 would work on my laptop but most of my drivers are not compatible with the operating sytem And I don't want to install 64 bit Windows as I like 32 bit.
The drivers that are not working on Windows 7 32 bit are:
Realteck RTL8188EE 802-11b/gn witeless lan
Realteck ethnet die and
Intel High definition graphcs driver
Which don't work at all on Windows 7 32 bit as they are 64 bit only drivers.
So can you please post me a link bth the network and Intel graphics drvers that work with my laptop. As I have tried lots of different Realteck and raphics drivers for Window 7 but NONE of them work on my system. And None of my USB ports are working either. So how do I solve this problem?
This question was solved.
View Solution.

Hi:
Should be no problem to get W7 32 bit to work on that model.
Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
Your model uses the Intel HD graphics driver only.
The first driver you have to install is the Intel chipset installation utility and then reboot.
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
Audio: Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

Unable to install Windows 7 pro after restart by Boot Camp Assistant

Hello,
I have an issue with installing windows 7 pro 64bit on my MBP 13" mid 2009.
It has 500GB Samsung HDD.
I tried to install windows 7 on a boot camp partition with boot Camp assistant and also during the process, I
downloaded the driver helpers from apple website and burned it on dvd. after system restart, It starts to load windows
files and then asks me to give it the cd of drivers [ right after I select the country and language in the start of the setup ]
I tried to select the files of the cd [ which I burned by the boot camp assistant ] but it just keeps telling me there is
NO suitable driver matches my mac.
I have downloaded the genuine windows 7 and burned it on dvd.
Also I have Lion, Boot Camp 4.0.1
Can someone please help on this issue?
Many thanks,

The partition table needs to be repaired.
That is why the guide asks to backup before you begin.
Try Lion Recovery and check health of all the partitions.
Sometimes repairing or try shrink and expand the partition.
But it is not uncommon for what happened to you to render the drive with smaller HFS and then require erase the drive in some cases and restore.
Carbon Copy Cloner 3.4.2
Cloning as a Backup Strategy
CCC is now able to also clone Lion's Recovery Partition as well.
Check partition table health in Lion's Disk Utility
Create Lion Recovery Drive
Lion Recovery Mode

Installing Windows 7 64-bit - DVD won't boot

Similar Messages

Maybe you are looking for