Installing Windows 7 on IMAC 27 256G SSD 2 TB HD Core I7 8G Ram

I am a relative computer novice and purchased in Aug 2010 the lastest IMAC 27" with a 256G SSD and 2TB HD Core I7 withe 8G Ram. Here are my questions:
1. I wish to install Windows 7 on the SSD using Bootcamp. I would then like a recommendation as to whether to install my other programs (MS Office 2010, Quicken, Norton360, et. al.) on either a) the SSD or b)the 2TB Hard Drive.
If I install Windows 7 on the SSD, then how would you recommend partitioning the SSD between OSX and Windows 7? Is there a way to put Windows 7 on the SSD and my other programs (MS Office 2010, Quicken, et. al.) on the 2TB HD?
I'm looking for guidance on the best way to set up this computer. I want the boot up speed of the SSD if possible. The majority of my work is on Windows 7. Any advice would be greatly appreciated. Thx.

I just got everything working the last 2 days.
I gave it a try with the HDD still under GUID and had made one partition in HFS and one in Fat32.
And like a miracle everything went smooth,no problems at all with the Win7 install under Bootcamp!
So it looks like the new Imacs got a new motherboard and Win7 now installs without a problem though the second drive has GUID.
The only minor inconvenience I see is,that after booting in Win7 the speakers are muted,but one click to demute and everything works fine.MacOS starts with speakers on as usual.I read somewhere,that MacbookPro owners mentioned exactly the same problem and it is as yet unsolved.
As far as I can see there are two types of audio devices,one is Cirrus,the other WS-Audio.
I also sidestepped the bluetooth issues by using a usb keyboard and mouse from my Win PC.Only ejecting of the Win7 DVD didnt work ,but one boot in OSX took care of that too.
I am really happy with my first Mac and thanks again for your help
clamic

Similar Messages

If I install Windows 7 on iMac (what we have done many times and it works very good) does windows support the fusion drive?

if I install Windows 7 on iMac (what we have done many times and it works very good) does windows support the fusion drive?

Welcome to the Apple Support Communities
Fusion Drive is created by software on OS X. On a computer with Fusion Drive, Windows is installed on the HDD, but when you install the Boot Camp drivers, you will be able to read Macintosh HD, so it looks like it supports Fusion Drive but only for read

How do i install windows on the Imac and do i need a seperate disk to install it

I am having trouble installing windows on my imac i really need someone to help me because i have certain downoas and things i need to install in order to go through college please help me!

Welcome to Apple Support Communities
1. Open Boot Camp Assistant and download the drivers
2. Create the partition and insert the Windows disc
3. Your computer will restart into the Windows DVD. Erase BOOTCAMP when it asks for a volume
4. When the install ends, install the drivers
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
I try many time, but after restart bootcamp partition, apple show blinking folder error
I think this firmware not support to install windows by usb
NOTE:
I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC ?

I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
But- are you trying to reboot with both the USB install and the DVD install both plugged in? that would definitely cause confusion.
Do this, reboot with NOTHING plugged in. Once you hear the Mac chime, immediately press and hold option.
You should only see the Mac HD, and Recovery Partition.
THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows. If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing. I had to do it this way on my mid 09 MBP.
Let me know if this works to start the install. If not we may have to start over with Bootcamp Assistant

Can I install Windows on my iMac 27, 3TB Fusion Drive, late-2012 with Boot Camp 5?

Hello. When I first opened the Boot Camp Assistant app, it said it could not work with the 3TB fusion drive. With the updated version of Boot Camp, the option to install Windows appeared. I tried to install Windows 8, but the loading bar stopped moving. I waited for hours, but it still did not move. I decided to quit the app, and re-open it, in order to try again. It crashed, and would not open. So I restarted my system and when I did that I noticed that I had about 1GB or so left of storage. This shocked me, because the disk was just suddenly filled for some reason. In hopes of fixing this I used an app called 'CleanMyMac' to try and recover the disk space. And as I thought the disk space returned to normal. However when I went to Disk Utility and clicked 'repair disk' it said this...
There is only 1 partition, so the Boot Camp process did fail.
I don't know whats wrong with my system though? I would like to install Windows, but I'm worried that I might recieve errors again. I have not got Apple Care, but I'm playing on buying it soon, due to it being almost a year since I bought the system.
Maybe I did something wrong when trying to install Windows with Boot Camp? I don't know, but if possible can someone please tell me if I can install Windows and if something is wrong with my system.
Here is some additional screen shots of the type of system I have.
Thank you for your help with this issue!

Which copy or version of Windows? and how where was it purchased?
my window installed itself perfectly on another computer.
One copy and you want to activate on two computers?
With 16GB, it will try to create 16GB hibernation file, 24GB page file, and need 20-30GB for the OS, plus room for temp, cache, applications, 9GB just temp to install SP1 update(s).
did you create 80GB or larger partition?
also, some macs with ssd + hard drive have issues, and of course you need Windows 7 64-bit home premium (Pro to use more).
OWC has up to 32GB, not cheap.
http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27
Crucial is usally very helpful, try email cs.

Can't install Windows on my iMac with 16 Go !

Hello !
I bought an iMac i7 3.4 GHz SSD + 1TB drive and 4GB of ram. I replaced the 4 GB of RAM with 16 GB purchased from Crucial (4 strips 4GB with a priori the same features as the apple strips which are Samsung ...).
Everything is fine when I use Mac OS 10.6.8. No memory problem.
By cons, can not install Windows 7 32 bit or 64. An error occurs during the installation process : 0x80070570. After a little research on the forums, it is an error that may be due to a corrupted media - for example broken record - but this is not the case : my window installed itself perfectly on another computer.
The experience of other users evokes an error caused by memory. So I reinstalled my original bars of 2 GB. And there, no problem of installation. Windows is working properly. After reinstalling Windows, I replaced my memory with my 4 bars crucial,"and there is the drama." Windows becomes unstable : crashes, errors of registration,software installation... useless... I run a diagnostic memory test that went smoothly ! Obviously, the memory does not seem corrupted, especially since it works well on Mac OS 10.6.8.
So I decided to link the two strips origins (2 GB each) with two crucial strips (4 GBeach), a total of 12 GB of ram. And it works.
Do you have an explanation for this problem? Do you know how I can install Windows with my 16 GB crucial?
Thank you.

You make no mention of how your are attempting to install MS Windows so it's a little tough to help you. If you are using Boot Camp please use Boot Camp Assistant and if you still have problems please post in the Boot Camp forum. If you are using virtualization software (Fusion, Parallels etc.) then use the instructions that came with their software and if you still have difficulty please post in their forums.
Roger

Installing Windows 7 on an External Thunderbolt SSD

I have an iMac 21,5" late 2012.
I want to install Windows 7 Professional Bootcamp on an External Thunderbolt SSD (Basic NTFS partition).
I tried the normal Bootcamp installation Guide but it wouldnt let me install on the external SSD drive.
I also tried using this guide http://www.intowindows.com/how-to-install-windows-7-to-usb-external-hard-drive-m ust-read/
But didnt work, probably because it's not for Mac users + not Thunderbolt.
Anyone got any ideas?
Thank you for reply!
Best Regards
Jonas

yeah thats what I tried with this guide, as I already have windows installed on the iMac but on the internal fusion drive (that doesnt work properly in Windows).
Thats why I want external SSDs booting windows when I edit videos (all my softwares are windows based).
Im gonna try a couple of more things, as I always say "there's gotta be a way!* hehe.
Ill be sure to post here IF I find a solution.

B(lack)SOD after install windows 7 on iMac late 2009?

I know it's been covered a million times, and I have read the forum and support pages and tried everything imaginable, but I still get a plain black screen after I install windows 7 on my late 2009 iMac 27" macos 10.8.5.
I know this is because the display drivers are not installed, and I have downloaded the correct drivers from here: http://support.apple.com/kb/HT3983?viewlocale=en_US&locale=en_US
...and followed the instructions to the letter from here: http://support.apple.com/kb/TS3173
...but it still doesnt work.
For whatever reason, it is not installing the drivers from my MS-DOS (FAT) formatted USB drive. I have the 'drivers' folder and the 'AutoUnattend.xml' file in the root of the USB drive.
at the end of the page in the second link above it says: "If the screen remains black after several minutes, power it off (hold the power button for several seconds), then go back to step 4. Ensure that your USB device or SD card is formatted as Master Boot Record, FAT, and that AutoUnattend.xml and Drivers are on the root level of the directory."
I have done this over and over and over again. A problem with bootcamp assistant, is that you have to start from scratch each time, I dont need to partition the drive and reinstall Windows, I know it is installed, I just need to install the drivers.
Is there anyway to install the drivers manually? Or does anyone have any other ideas?
Many thanks in advance.

I have exactly the same problem...

Can't install windows 8 on M.2 SATA SSD Ideapad y510p

hello,
So i bought an ADATA M.2 SSD to put in my Ideapad Y510P, it has an M.2 slot.
In the BIOS it does see the SSD, so i started to boot windows 8 from a dvd, now when i select the SSD to install it on, it gives the following error:
Windows can't be installed on this location, the followig has happend: 0x80070002
I already tried to boot windows 8.1 from usb but the same thing happend, then i updated the BIOS since there was a newer version available, this also didnt help.
Does anyone have any suggestions on how to proceed??
Bram

Yes, you should check the Disk Management also again. The SSD should be displayed there, if it is not being displayed then change the Boot Mode from UEFI to Legacy and try to install windows. (And Yes SecureBoot needs to be Disabled)
Ideally, the SSD should be initialized first from the Disk Management (But after all tries if you still can't see it, just try the above method.
Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
When your plans fail, your Real Story begins!!

How to install windows 7 on Imac late 2009 using Vmware/Vbox

Hey guys. Here's the thing. I've installed Windows 8 on my imac late 2009 but then i realized that there's no bootcamp drivers for it (check image).
everything works fine except for the video drivers that crash everytime when i install any driver (bootcamp or manually).
So I've searched on many forums n i found a guy that could do that by using Vmware/Virtualbox by accessing the full disk n installing it from there.
Here's what we wrote -> (http://forums.macrumors.com/showthread.php?t=1526883)
"Thanks for the suggestions, but installing from usb wasn't working, and refit didn't recognise the external dvd drive too (it was in the list, but when i tried to load it i got an error).
But i found a solution, not usual procedure but still good and easy to do.
I installed virtualbox, created a virtual machine with the full disk access (you'll have to unmount all the partitions first and run virtualbox as root), started installing windows, when the copy of the files ended and the vm was rebooting i simply closed it and rebooted my imac and finished the installation directly on the imac, everything went well...
Thanks again for the help"
Important notes :
- My superdrive is broken
- I can't boot efi windows 7 (cause it needs efi 2.0)
So i might ask u 2 things..
1- Is there a way that i can install all those drivers on windows 8.
2- Can u describe how he did that with Vmware/Virtualbox?

I can't. Just like i said. My superdrive is broken so the only way is to boot from usb but my imac's efi firmware is 1.0 and to boot a windows 7 efi you must have at least efi firmware 2.0. I managed to install windows 8 cause it needed efi firmware 1.0 that's why.

How can I install windows 7 on imac 27 late 2012

I wanted to install windows 7 64 bit on a iMac 27 inch late 2012. Everything went smooth until it restarts. Then I get the following message.
Non-system disk
Press any key to reboot.
After this, there is no reaction. By the way, I don't have Fusion Drive. I have normal SATA drive.

Hey Guys,
I was able to start boot manager. I had 4 options:
1. Macintosh HD
2. Recovery-10.8.2
3. Windows
4. EFI Boot
I choose option 3 (Windows). But i got the following message.
CDBOOT: Couldn't find BOOTMGR
Any idea?

Trying to install Windows 7 on iMac Mountain Lion - Pain

Hey all,
I am having hard times trying to install Windows 7 (64 bits) on my iMac.
Have followed every steps (Boot Camp and Apple guides, checked the forums here, etc.); made the partition, downloaded the drivers onto an empty and FAT formatted USB hard disk, etc., and all that worked fast and easy.
The problem starts when it comes to install W7 (Superdrive built in so it's in a DVD): after I choose the language, right away it says "No drivers found". It supposes to ask for the drivers after the installation but it does the opposite. I have checked the drivers one by one and it recognizes some of them, but when it tries to load them a new windows pops up repeating the same "No drivers found" thing.
I even modified Boot Camp so now it can burn a ISO image onto a USB drive. Downloaded and tried another W7 version but it was worse ("no bootable device" message...)
Have checked many other threads like this, vids, etc., but have found no solution so far. Apple's help definitely *****... And this supposes to be cake. Have spent days on this and nothing.
Just in case, all I have used on this is Boot Camp (updated, 5.0.4) and everything else on my computer is updated also. Don't have any VM, nothing like that.
Don't know how to solve this and install Windows on my computer. Please somebody help me. I am far from being a tech so will appreciate your patience on descriptions. Thanks!

There are various guides for installation and compatibility on the Apple support site for Bootcamp, did you download and read them?
I have only installed Windows once with Bootcamp, that was Windows 8, I followed the instructions and it worked ok but there seems a few items that you need to be aware of, it is all in the manuals, Apple suggest you print them off for reference.
That is about as much as I can tell you.

HELP! installing windows 7 on imac late 2009

Ok, I've read a hundred threads on how to install Windows 7 on a new iMac, I've talked to the Apple "experts" on the phone, and I still can't get it right.
I've used Bootcamp to create my hard drive partition (200 GB). I've downloaded the drivers from Apple (iMacLate_2009_Win7Drivers) and placed the drivers on a flash drive that was formatted as specified on this page:
http://support.apple.com/kb/TS3173
The flash drive now is called "MBRFAT". The article says to put the drivers on the flash drive not in any subfolders, but the file I downloaded has the drivers already in a subfolder ("drivers"). Do I put that whole subfolder on the flash drive or do I try and find the drivers within that folder? I tried copying the whole "drivers" folder as well as the AutoUnattend.xml to the flash drive.
I went through the whole Windows install and still ended up a blank black screen for over 20 minutes.
What am I doing wrong???
FYI, I'm using Bootcamp 3.0.1 (tried to upgrade to 3.1, but only found the .exe upgrade file which I assume can only be ran after I install windows). I also have updated my OS so I'm now on 10.6.3.

ok first of all, you should not get a black screen after a fresh install of windows 7. as you were installing, the display was working, no? after the install is done you should see the desktop of windows 7. if all you see is a blank screen after a brand new installation of windows 7, you did something wrong in the install.
what i would recommend is just start over. insert your windows install cd and restart, booting from it. go through the installation process as normal. when it is time to select the drive to install to, use the options to first erase and format the partition before selecting it to install. after this, it should install fine, and once it is done you should see the desktop (it will most likely be displayed in the wrong resolution, making it look fuzzy and weird). now you can copy the drivers from your flash drive to the desktop and install them. (sub-folders shouldnt make a difference. just copy it exactly how you downloaded it and you should be fine)
good luck! let me know if you need more information/ more details/ whatever!

HT3986 Installing Windows 7 on iMac using USB

If I install windows 7 on my iMac using a USB eksternal hard drive, will I be able to use my USB after i´m done installing window 7????

yes you will be able to.

Problem installing windows 7 on iMac

Hi,
I have a iMac 20-inch mid 2007, 4GB ram, Intel core 2 duo. When i installing Windows 7, i will get a blue screen when i'm at Copying Files... I tried installing at safe mode, but ended up with a bluescreen at Finishing installation. Any idea how to solve it?

There are Apple tech articles addressing this here:
http://www.apple.com/support/bootcamp

Installing Windows 7 on IMAC 27 256G SSD 2 TB HD Core I7 8G Ram

Similar Messages

Maybe you are looking for