Installing Windows 7 on new HD

When I try to install Windows 7 on a NEW HD, the installation stops at "Where do you want to install Windows?" The details are the selected partition requires at least 10295MB free space. Disk 0 unallocated space =3.9GB. How do I change the partition
size on a new HD?

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Similar Messages

How to install Windows 7 on new hard drive?

I have changed the old hard drive (500 gb) with a new hard dirve (1 Tera), and now I have two problems: -
1. How do I install Windows 7 on new hard drive?
2. My laptop was pre-installed Windows 7 Pro, but all the DVD kit (Application & Drives Recivery Disc + Operating System Revocer), which was provided (by Lenovo) for the laptop is in the Windows 8 Pro. So how do I install Windows 7 Pro, in my laptop while all DVD kits are in Windows 8 Pro?
by the way this is my laptop spec (for reference) ; -
* Note *
I plan to install Windows 7 Pro in my new hard drive using another Windows 7 DVD (Not DVD provided by Lenovo), but how do I get all the Leveno program which found within the 'Application & Drives Recivery' disc (such as ; - Lenovo System Health and Diagnostics, Lenovo Power Control,Lenovo's Fingerprint Reader) to install in that hard drive? (as I tell you before, all the DVD kit is in or only for Windows 8 Pro)
I hope somebody will help me answer my question,
Thank You
Solved!
Go to Solution.

I got the solution;
Answer to question 1 ; using a backup & recovery software to clone my current OS, then transfer to my new hard drive.
Answer to question 2 ; download all the Drivers and software ( all the application that located on the DVD kit that I have) on Lenovo Official Website.
or other solution, send it to a computer service shop and let the experts ( the workers) install it for me ( the most simple and safe way).

I need to install windows on my new Macbook pro for running my flight simulator software

Hi!
I'm new to the Mac world and I need to install windows on my new Macbook pro for running my flight simulator software which only runs on windows. I would like to purchase and download the windows 8.1 rather than buying the CD.
When i go to the microsoft store and click windows 8.1 it says it is only for who has windows xp or vista...
can you tell me where and how can i purchase the full installation 8.1 for download?
i will keep the ISO file on my flash drive.
Thanks!
<Re-Titled By Host>

it's likely an upgrade you are looking for and not a full install of windows
http://www.techrepublic.com/blog/windows-and-office/get-the-iso-you-need-to-crea te-your-own-windows-81-dvd/
if you get it as an iso file then you need to burn the iso file to a optical disc to install it

I have installed windows on the new NTFS partician and cant boot it back to mac

I have installed windows on the new NTFS partician and cant boot it back to mac. I dont think I loaded the bootcamp for windows properly now it is stuck in Windows with no bootcamp icon

Restart Windows, hold down the option key.
If you have a valid OSX install, the drive should appear. Choose the OSX partition and continue.

Trying to install Windows 7 on new iMac

Trying to install Windows 7 on new iMac (OS X Mavericks). Have Windows 7 DVD. Have superdrive. Have USB flash drive. What is, and where do I find the "Windows ISO image" that Bootcamp is asking for? ("select the Windows ISO image"...)

You can use the installation dvd from microsoft or you can download the iso file from microsoft and use that method instead.
http://techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/

How do I install Windows on a new Mac Mini (w/o optical drive?)

The new Mac Mini does not have an optical drive and I would like to install Windows with Parallels Desktop 6
Any ideas? Can I put the iso on a USB drive or mount a NAS?
Thanks for ay help!
Enzo

You can burn an ISO of a bootable disc back to a DVD, but not to a USB device. I don't know if Parallels is able to install from an ISO, but it may install from an external drive. This is why you should read the documentation for Parallels or ask at their tech support site.

Anyone manage to install Windows 8 on new Macbook air?

Hello,
Got a new "June 2013" MacbookAir 13" 8GB 256SSD and I've been trying for days to install Windows 8 PRO 64-bit using Bootcamp. No joy. Tried both a USB key and an external DVD drive. Same problem all the time: in the Windows 8 setup, I selec the country and language, press Next and it tells me that a "DVD media driver" is missing. I browse to the WINSTALL and BOOTCAMP directories on the USB key which Bootcamp created, it doesn't find any drivers.
If I use Windows 7 32-bit, it gets to the country/keyboard selection and then freezes.
Is it just that Bootcamp doesn't support Haswell yet? That's a pity cos it means I need to keep two laptops.
Thanks for any advice,
- Alan.

Got it to work finally.
Used BootCamp Assistant to download the Windows drivers to a USB key and create a BootCamp partition. Don't use it to create a USB boot disk.
That's my biggest tip - use a DVD not a USB boot disk.
Also, if you get a "media driver missing" error, then get a different ISO image and burn it to DVD. Don't use IMG files converted to ISO files.
When Windows setup boots, you'll probably need to click on the advanced drive options and re-format the BOOTCAMP partition. Otherwise Windows will say that it can't install on it. Be careful that you select that one.
During the setup, Windows will reboot. Remember to hold down the Alt key when you hear the dong and select the Windows DVD (first time) and the Windows drive (second time).
After Windows installs, install the BootCamp drivers in WININSTALL\BootCamp on the USB key by running setup.
Takes maybe 15 mins to install Windows 8.

Can't install windows 8 on new macbook pro retina display.

I spent my afternoon trying to install Windows 8 Pro on my new Macbook Pro with retina display. I get fairly deep into the installation process using bootcamp when I get a windows message that says something to the effect that windows can't be installed because the hard drive is not formatted in NTSF format. And that is the end of the line.

Welcome to Apple Support Communities
It's normal. Boot Camp Assistant formats the Boot Camp volume in FAT32 because in the past it supported Windows XP and it could use FAT32. This changed with Windows Vista.
The only thing you have to do is to choose the BOOTCAMP partition in this step, and select "Drive options (advanced)". Then, press "Format" and it will be formatted into NTFS, so press Next and the installation will start.
See the Apple's guide > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

Issues with installing windows on a new macbook pro retina.

Hello,
First time using bootcamp on my new macbook and I am running into an issue.
I have read the troubleshooting guide and everything else and no matter what I do I get the same problem.
The issue is that when bootcamp restarts after partitioning my drive, windows loads and I start the install process. Its says set up is starting and then it says that a required cd/dvd drive device driver is missing. I only have one usb drive connected (the one with windows on it) and nothing else. This is getting incredibly frustrating haha.
info on the macbook.
brand new (purchased yesterday) macbook pro 15 retina. 512ssd gtx 650. 12 gb of ram
I really need windows on my pc before monday so all help is appreciated.

External USB DVDs use to be an issue that req'd editing plist to allow booting from one.
I have lost track of the issues and fixes but for burning ISO:
SimplyBurns is a Mac OS X application with a GUI, which allows the user to burn CD / DVD media.
Features:
Emphasis on ease of use
Audio CD project, Data project (Filesystems: ISO9660, Joliet, HFS+, UDF) and Burn image mode
Erasing rewritable media
Persistence
http://simplyburns.en.softonic.com/mac
Here's instructions on burning an ISO with Disk Utility:
http://lifehacker.com/251758/mac-tip--how-to-burn-an-iso-or-dmg-file-to-disc
And this thread on burning a Windows DVD in OSX:
https://discussions.apple.com/thread/2039118?start=0&tstart=0
(Summary: you can use Disk Utility to burn the ISO, but choose a slow burn speed)
Windows 7 USB/DVD Download Tool Windows can be used with any VM
The Windows 7 USB/DVD Download tool allows you to create a copy of your Windows 7 ISO file on a USB flash drive or a DVD. To create a bootable DVD or USB flash drive, download the ISO file and then run the Windows 7 USB/DVD Download tool. Once this is done, you can install Windows 7 directly from the USB flash drive or DVD.
http://wudt.codeplex.com/
Install Windows 7 From USB Drive
Before you begin, you will require the following:
USB Flash Drive (4GB minimum)
Windows 7 ISO Image file
UNetbootin
Note: If UNetbootin doesn’t work, try out the Microsoft’s official tool called Windows 7 USB/DVD Tool.
Note that resulting USB drives from UNetbootin are bootable only on PCs (not on Macs).
http://unetbootin.sourceforge.net/
http://www.addictivetips.com/windows-tips/install-windows-7-from-usb-drive-requi res-2-simple-steps/

Can't instal Windows 7 to new hard drive

Hello everyone,
I was looking for solution for a while, but cant find it, so I really hope you'll help me here !
First of all, I 've been using my pc until I received the S.M.A.R.T. warning about possible hard drive failure soon, and one morning PC didnt start - one of the hard drives was dead (in my hp model there are two hard drives). After finding out which one was it ( I tried taking one hard drive out, leaving the other and vice versa) I bought a new 500 GB hard drive. Aparently the damaged hard drive was the one with operating system, because of startup message which told me that operating system not found. Nothing fancy, just instal windows like I always did, or so I thought ..
Got my USB flash drive with Windows 7 64 bit, plug it in, the usual windows instal guide loads up. I choose my language , keyboard input etc . At the point where I have to choose "where do I want to instal my windows" I see two hard drives: 1) disk 0 Partition 1 (my old original 232 GB stock drive) and 2) disk 1 Partition 1 (new recently purchased 500GB drive).
So ofcourse, since I replaced old hard drive with the new one I just bought, put it in the same slot, naturaly I chose my location for windows - new hard disk 1 Partition 1. When I highlighted it, a yellow mark apeared at the botom which said "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS menu".
Ok, so I tried to continue anyway, I pressed next and windows began to instal, took about 10 - 15 mins. Everythings normal until first restart part before completing instalation. PC restarted and .. Windows instalation setup started once more from the begining. So I thought , ok I ll try to instal to the old hard drive disk 0 Partition 1 ( this time there was no yellow warning mark). So instalation began again , restarted , and ... Once more instalation setup starting from begining !
I am really lost here, I tried replacing hard drives places whith each other, or leaving just one of them, every time windows starts instaling from begining ! Allthough, everytime there are less and less disk space, which means it actualy is instaling.
So any thoughts where to start ?
I would be so greatful for your help,
And see ya

Hi @Seniunas ,
Welcome to the HP Forums!
It is a terrific place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
It is my understand that one of your two hard drives failed. You have replaced the failed drive and are having a difficulty installing Windows 7 from a USB stick.
I have some questions.
What is your exact model of n DV9700 notebook?
How Do I Find My Model Number or Product Number?
Is this a retail version of Windows 7?
Were your drives setup in a RAID configuration or just two individual drives, one being the boot drive with Windows.
You could try this, I am not sure if it will work.
Remove the 232 GB drive completely from your system.
Boot to your Windows 7, USB stick and let Windows format the drive before it installing Windows.
If this completes successfully, make sure the boot order is set to boot to that drive and test it.
If you are then able to boot into windows, shut down the notebook and reinstall the secondary drive.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Help -- cannot install Windows on my new Macbook Pro

I have a new 2010 Macbook Pro with an Intel SSD inside, and where the DVD drive is I have a 500 GB hard drive with the MCE Optibay, which I used with no issues for 1 1/2 years in my last laptop. I have everything set up nicely however I find I am unable to boot any Windows disk when I go to install boot camp. I set up the 2nd partition, then go to do the installation using an external DVD drive that I've used before with no issues. The disc is sesned and everything seems like it will work but instead of booting the Windows installer disc I get a "No" Mark (like Ghostbusters without the ghost) and it stops booting. I've tried Vista (two different discs) and 7 and nothing will boot.
Can anyone tell me how I can go about installing Windows on my 2nd disc. The disc itself is fine. Boot Camp sees it and says which disc would I like to make a Windows partition on, and all seems fine -- but the OS just won't boot off the Windows disc no matter what. Have tried 2 different external USB drives and it's frustrating.
Hope someone can help!

The problem you are experiencing probably isn't unique to your particular MBP. It took me two months to get Win7 (32 bit) installed and working on my MBP (early 2010 15.6" screen). I gave up on trying to get the 64 bit version to work. As far as I am concerned getting Win 7 to play on a Mac Book Pro is a crap shoot. You really have to be lucky, good has nothing to do with it. Maybe in another 6 months things will have progressed to the point that the installation is actually a no brainer. Sorry I can't be more supportive of your efforts.
I don't have a clue as to why the 32 bit version installed (not without problems I might add), and I could never get the 64 bit version to play. I used the retail version of Win 7 Ultimate which came with both 32 and 64 bit DVD's.

How do i install windows 8 on new imac late 2012 model

how can i install windows 8 onto a new imac without a disc drive

Kappy wrote:
I would forgo Win8. Apple does not yet support Win8.
Not to mention it hasn't exactly had outstanding reviews and people don't seem to be happy with the changes...

HT1199 After trying to install window 7 my new iMac will not reboot back to apple. Black screen "No bootable device -- insert boot disk and press any key". How do I get out of this?

After trying to install Windows 7 in my new iMac It will not boot up back to Apple. I have a black screen with the following "No bootable device -- insert boot disk and press any key". My iMac did not come with a boot disk. What can I do?

Try holding down the option/alt key during a restart and see if you can see/select your boot drive there.

How to install Windows XP on new iMac - Bootcamp or Parallels?

Hi
I'm very new to the Mac world. I just purchased a lovely new iMac.
I would like to install my Windows XP Professional (SP3) on to my iMac.
I purchased Parallels Desktop 5 for Mac and before I do anything, I want to know what I should do first.
Do I install the Windows disk through bootcamp first and then install Parallels Desktop 5?
or
Can I bypass bootcamp all together and install Windows through Parallels?
Any feedback would be greatly appreciated.
amatxilinda

Parallels 6 comes out on the 14th.
http://www.appleinsider.com/articles/10/09/09/parallelsdesktop_6_for_mac_to_launch_sept_14_with_80_newfeatures.html
If you will never want to run Windows natively, then you don't need Boot Camp. Otherwise, install first on its own partition, get it setup, then Parallels, and only then activate. Or reactivate. After you have Parallels Tools installed.
Really ought to check on Parallels forum.
http://forum.parallels.com/forumdisplay.php?&f=58
To get the hang of OS X, no matter level of expertise, even though Apple has their 101 Help and Switching, "Missing Manual for OS X" is excellent 900pg reference to get the most out of it.
http://www.apple.com/support/
http://books.slashdot.org/books/08/02/27/1551206.shtml
http://www.amazon.com/Mac-OS-Snow-Leopard-Missing/dp/0596153287/
Switching to Mac? not so useful.
http://www.amazon.com/Switching-Mac-Missing-Manual-Leopard/dp/0596804253/

Problems installing Windows 7 on new iMac?

I've heard from users on other forums that there are some problems installing Windows 7 on the new iMacs, mainly that the display goes blank partway through installation due to some kind of driver issue. Can anyone confirm this or elaborate? I've heard there is a workaround but it sounds a bit complicated and I'm wondering if I should just wait until Apple patches Boot Camp with full Win7 support.

I would wait until Apple updates Boot Camp to officially support Windows 7.
http://support.apple.com/kb/HT3920
FYI - There is a forum for Boot Camp
http://discussions.apple.com/category.jspa?categoryID=237
so you may find more useful information there.

Installing Windows 7 on new HD

Similar Messages

Maybe you are looking for