Installing Windows 7 on the new 27-inch I-Mac

Hi,
I have tried to instal windows 7 using the parallels desktop onto my new imac. but every time i get towards the end of the installation, i get a message telling me i need a device driver. i can't find the device driver, so i have no option but to stop the installation. does anyone know what i should do ? where do i get the driver from ? is it a mac driver or a windows driver ? PLEASE HELP !!

Ah... I don't see anything 'wrong' with using a VM to try it out and take it for a drive.
Parallels has their own forums. Sun's VM is free and works with 7. (include version of Parallels or assume you have the latest available?)
I know there are some glitches with 7 and the P55 based board, and with i5/i7 (Hardmac shows how they are 2x faster than the old cpus and blow them out of the water).
Was this an upgrade or system builder or full home premium?
But it really helps to say WHAT and other little things like detail. And first time... always a dry run and figure things out for a better attempt next go round.
Oh, and of course it is a Windows driver.

Similar Messages

I have installed windows on the new NTFS partician and cant boot it back to mac

I have installed windows on the new NTFS partician and cant boot it back to mac. I dont think I loaded the bootcamp for windows properly now it is stuck in Windows with no bootcamp icon

Restart Windows, hold down the option key.
If you have a valid OSX install, the drive should appear. Choose the OSX partition and continue.

How to install windows on the new SSD

I am planning to buy a SDD.
However, how can I use my Windows Product ID for installing a new system on the SSD;
Is there any recommendations for this situation. I want to keep all lenovo functions in the new SSD.
BTW, it is T420.
THX!
Solved!
Go to Solution.

hi.
did you make the Lenovo recovery dvd set from your original factory windows installation?
if so, then:
- simply swap out the platter drive for the new, blank ssd.
- make sure that your optical drive is listed first in your bios boot order.
- boot disk #1 of the recovery disk set and follow the prompts.
- in short order you'll have the ssd set up with "all lenovo functions" as you've described you wish.
- you won't need the Windows key from the sticker on the bottom of your machine.
if you didn't make the set, then it'll take more work. once you've installed Windows on the ssd, you'll need to get Thinkvantage System Update from the driver matrix here: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167 and install it. you'll be able to update hardware drivers and Thinkvantage apps from it. once you've completed that, you can double check the matrix to catch anything newer than offered by TVSU.
hth a bit.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

HT201269 My old windows computer crashed and I had to buy another one. I rescued my itunes file off of the old one and installed it on the new desktop. How do I get itunes to recognize it so that I can get all my old music (mostly burned CD's) to be rec

My old windows computer crashed and I had to buy another one. I rescued my itunes file off of the old one and installed it on the new desktop. How do I get itunes to recognize it so that I can get all my old music (mostly burned CD's) to be recognized

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Installing windows 7 on the NEW iMac 21.5inch mac

Hey Guys
im thinking on buying the new iMac 21.5 mac (link Below) but im wondering how would you install windows 7 on there through bootcamp.
The Mac doesnt have a disk drive and Apple USB Super Drive connects via USB which the Mac will not read well trying to install windows.
http://store.apple.com/au/browse/home/shop_mac/family/imac
So what steps do i take?

Well, if Windows isn't going to be used for gaming, just running Windows Apps, I'd highly recommend...
Parallels...
http://www.parallels.com/
VmWare Fusion...
http://www.vmware.com/mac
VirtualBox...
http://www.virtualbox.org/wiki/Downloads

I purchased Lightroom 5 and Elements 12 and installed them on a computer. I now have a new computer, and wish to install them on the new one. When I tried to do so, my only option seemed to be Adobe Cloud. When I was asked for my LR serial number, it was

I purchased Lightroom 5 and Elements 12 and installed them on a computer. I now have a new computer, and wish to install them on the new one. When I tried to do so, my only option seemed to be Adobe Cloud. When I was asked for my LR serial number, it was not accepted. Please help me install these two products; I prefer stand-alone, rather than a monthly fee. Thank you

PSE 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

How to install Windows 7 on new hard drive?

I have changed the old hard drive (500 gb) with a new hard dirve (1 Tera), and now I have two problems: -
1. How do I install Windows 7 on new hard drive?
2. My laptop was pre-installed Windows 7 Pro, but all the DVD kit (Application & Drives Recivery Disc + Operating System Revocer), which was provided (by Lenovo) for the laptop is in the Windows 8 Pro. So how do I install Windows 7 Pro, in my laptop while all DVD kits are in Windows 8 Pro?
by the way this is my laptop spec (for reference) ; -
* Note *
I plan to install Windows 7 Pro in my new hard drive using another Windows 7 DVD (Not DVD provided by Lenovo), but how do I get all the Leveno program which found within the 'Application & Drives Recivery' disc (such as ; - Lenovo System Health and Diagnostics, Lenovo Power Control,Lenovo's Fingerprint Reader) to install in that hard drive? (as I tell you before, all the DVD kit is in or only for Windows 8 Pro)
I hope somebody will help me answer my question,
Thank You
Solved!
Go to Solution.

I got the solution;
Answer to question 1 ; using a backup & recovery software to clone my current OS, then transfer to my new hard drive.
Answer to question 2 ; download all the Drivers and software ( all the application that located on the DVD kit that I have) on Lenovo Official Website.
or other solution, send it to a computer service shop and let the experts ( the workers) install it for me ( the most simple and safe way).

How do you install logic on the new imac if there is no disk drive?

How do you install logic on the new imac if there is no disk drive?

Dj Generator wrote:
[There] must be other options, i would rather not spend £70 on a disk drive or £140 on the software again??
Hmmm? A quick google search for external optical readers turns up many in the $20-$40 (USD) range. Didn't convert to £ or include any VAT charges, but you should be able to get something significantly cheaper than £70. That's your simplest solution.
iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

I need to install windows on my new Macbook pro for running my flight simulator software

Hi!
I'm new to the Mac world and I need to install windows on my new Macbook pro for running my flight simulator software which only runs on windows. I would like to purchase and download the windows 8.1 rather than buying the CD.
When i go to the microsoft store and click windows 8.1 it says it is only for who has windows xp or vista...
can you tell me where and how can i purchase the full installation 8.1 for download?
i will keep the ISO file on my flash drive.
Thanks!
<Re-Titled By Host>

it's likely an upgrade you are looking for and not a full install of windows
http://www.techrepublic.com/blog/windows-and-office/get-the-iso-you-need-to-crea te-your-own-windows-81-dvd/
if you get it as an iso file then you need to burn the iso file to a optical disc to install it

Installing Windows 7 on new HD

When I try to install Windows 7 on a NEW HD, the installation stops at "Where do you want to install Windows?" The details are the selected partition requires at least 10295MB free space. Disk 0 unallocated space =3.9GB. How do I change the partition
size on a new HD?

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

When i install or reinstall the new itunes i get an error message that says:

when i install or reinstall the new itunes i get an error message that says:
apple application support was no found.
apple application support is required to run ituneshelper. please uninstall itunes, then install itunes again.
error 2
thats all it says ive tried to reinstall uninstall ive done all that and it wont work. i use windows 7
please help me!!

Yeah, this is absolutely ********. I have t5he same message, only i just started getting it when my Iphone4 went in to recovery mode.
I uninstalled itunes, downloaded the lates itunes just now, reinstalled it and got the same message.
So, i did some more google research, and saw a recommendation that rather than installing itunes, one should unpack it with win zip, or win rar.
I did this, and even though I just downloaded the apple software today, when i try installing application support, i gwt a message saying A LATER VERSION OF APPLE APPLICATION SUPPORT IS ALREADY INSTALLED.. go figure! Du-uh!
So, i uninstalled the new itunes, went - control panel-programs- and dis a search for apple application support, found it and deleted it too.
Resinstalled itunes and again the same message.
unistalled everything again, tried installing application support first, then itunes, and now I get a message saying ITUNES WAS NOT ISNATLLED CORRECTLY!
I am so annoyed right now, that if my puter was a person, I would be in Jail!
lol

How to install windows on the SSD (Y580)

I have bought an Y580 recently wIth a 64GB SSD and 1TB HDD. I asked the salesperson upfront if the OS would be on the SSD. He said yes. Turns out that it is not. When i returned to them they told me it's a hybrid drive solution. And they have no idea how to install Windows on the SSD.
I did some research and found out that Lenovo uses *Rapiddrive* to speed up programs. Hence why i can't see the SSD in WIndows as it is merged with the 1TB HDD. In Disk management 2 disks show , 0 and 1 , but Windows asks to give disk 1 a MBR or GPT (this is apparantly due to the rapiddrive methode).
My questions:
* Is it possible to install Windows on the SSD and if so how can that be done without loosing the backup on the hidden partition of the 1TB disk? (so that OKR still works)
* What are the benefits of Rapiddrive over using the SSD as bootdisk?

Since it is a hybrid drive, it works a little bit differently; Lenovo's "Rapiddrive" is also different from other hybrids, and in the sake of making it "user friendly" and seen as a single disc they have probably nerfed some configurability for the intermediate/advanced users. However, Windows should already be installed on the SSD portion of the drive, this should be done automatically according to this press release:
http://shop.lenovo.com/us/sitelets/ee/consumer-news
"In the factory we will preload not just Windows 7 on the SSD, but also our Lenovo applications like OneKey™ Theater or OneKey™ Rescue System. The applications, operating system, drivers and other files are all fully-optimized for Enhanced Experience to make them load much faster. This, combined with their installation on the SSD will make the boot time to Windows desktop even faster. Some portion of the SSD will also be reserved as the Windows Paging File — this is used by Windows as 'virtual memory' additional to the normal RAM installed inside the computer. With the SSD acting as the Paging File, general Windows 7 performance will also benefit, especially when multitasking several applications.
The remaining space, which will typically be around 15GB on a 32GB SSD, will be empty, ready for the user to install their favorite applications and files."
I have some of the fastest SSD's around installed on my desktops (SATA III), and while they are blazing fast, keep in mind the whole boot sequence still isn't going to be instantaneous even with an SSD (the biggest differennce you will notice is by the time Windows is loaded, it's fully loaded to the RAM, whereas a normal HDD you may see the desktop but your PC will still be cranking away with startup processes). If your startup is taking 30 seconds or less, maybe even a little longer, it's probably accessing the SSD just fine; if it's taking closer to 60 seconds, then yeah it may need to be reinstalled/reconfigured.
As for reinstalling, sorry I won't really be able to help, hopefully someone else can come along; I personally have never used OKR anyways, and aside from doing a ghost backup I wouldn't say for sure that OKR would be salvageable with a fresh install. And because the Rapiddrive is its own technology, half SATA half PCI-E, I also couldn't tell you if it's even possible to fully seperate the two and keep them as distinct drives.

Can i install bootcamp on the new iMac late 2012 "27"?

can i install bootcamp on the new iMac late 2012 "27" without fushion drive?

You have two possibilities:
1. Buy the USB SuperDrive and install Windows from a disc.
2. Use an USB drive with the Windows 7 installer inside.
Boot Camp isn't compatible with Windows 8, so you will have to wait. Also, the Late 2012 is only compatible with the 64-bit Windows 7 edition

Can i install Windows XP on new iMac 2013 to use quickbooks

I have just bought a new iMac 2013 and need to use my Windows Quickbooks programme for our small business. I understand that I can use Bootcamp to install my Windows XP and then Quickbooks 2010/11.
Is it true that the new iMac Bootcamp no longer supports Windows XP? I realistically only use the Quickbooks every 3 months. What is my best solution to be able to use Quickbooks on my new iMac

No. Boot Camp only supports Windows 7 or Windows 8. If you want to use XP, then you will need to use virtualization software such as:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
     1. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     2. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     3. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     4. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Installing Windows 7 on the new 27-inch I-Mac

Similar Messages

Maybe you are looking for