Installing Windows 7 on TX2-1020 - over Vista

Hey folks
my TX2-1020us really seems to be choking lately, even on the simplest things (like only having explorer open, on its own).
so i thought i might try installing Windows 7 Ultimate on it. at the moment, its running Vista Home Premium, pre-installed ( with all other drivers and apps preinstalled too).
I understand a clean install is rcommended, so i have a few questions, hopefully someone can assist -
1) will all the multi-touch and other hardware (bio reader, BT...) work? is finding and installing all the drivers a real pain?
2) should i format drive C first? (I have the drive partitioned to 2 other drives)
and.... 3) is it worth the hassle?
Thanks!
This question was solved.
View Solution.

Crash course :
 Go to drive "C" and you should find a file there named SwSetup, burn that to DVD, use Sony DVD+R. All you Vista drivers are in there along with software that is not included in your copy W7.
 Create some Vista recovery disc's with your recovery manager in case things go wrong, use Sony DVD+R again here.
 Use this guide and pay close attention to steps 9 through 15, print it out if you have to.
 http://pcsupport.about.com/od/operatingsystems/ss/windows-7-clean-install-part-1.htm
 After you delete everything on the drive, you will create "Unallocated Space". Leave it this way and install W7 on that. W7 will automatically format it for and create its own two partitions. I recommend to get everything up and running, use W7 to create some restore discs with its own software and then if you want to start partitioning the drive, do so now. If things go wrong you can use your image to fix things.
 After the install of W7 connect to the internet if you haven't done so yet and run Windows Update in the control panel _ it may even find some of your drivers for you.
 After the update process is finished, check again, continue this until it finds nothing.
 Install your drivers starting with your chip set and then video driver. In your case it's bundled in with ATI Graphics/Video driver.
 http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75976-1&lc=en&dlc=en&cc=us&...
 Keep going until all the warning signs in the device manager are gone.
 Post again with any questions, I am off to bed. 

Similar Messages

  • I wanted to install windows for Mac and I had vista so I put I the disk and installed it then it  loses my  computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have Ma.

    I wanted to install windows for Mac and I had vista so I put I the disk and installed  followed the steps it then it  closed my  computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have it so I wanted to go back to Mac I shut it off and it just goes back to windows and asks me to put the box code how do I get rid of it and go back to Mac because no buttons work at the start and i can't take out the disk !! Help

    The two other posts are correct... so I'll just clarify.  What's happening right now is your system is trying to boot into Windows in order to finish the installation.  What you want to do is make it boot into OS X.  As mende1 indicated, with your system off, hold down the Option key and continue to hold it while you turn the system on.  You will eventually be presented with an option to select which partition you would like to boot from.  Choose OS X.  After you get into OS X, again, as mende1 indicated, change the Startup Disk to OS X.  What this will do is cause your system to automatically boot into OS X when you restart it instead of you having to use the Option key when booting each time.
    Relaunching BootCamp Assistant will allow you to remove your Windows installation and partition. 

  • Can I install Windows Server 2012 r2 essentials over Windows 7 Pro

    I have new hardware that came with windows 7 pre-installed. It meets and exceeds hardware requirements. Can i install Windows Server 2012 R2 Essentials on this machine. What is the procedure? Any help would be grateful.
    Thanks
    Woodrow

    Hi.
    I agree with Milos on this; if you want to install Windows Server 2012 Essentials on a machine which suppose to use Windows 7, I would use it solely for test purposes.
    Could you tell us what the computer specifications are???
    For anything more serious (and I can see that you want to use this machine for accounting software), I would suggest purchasing a server machine.
    However, if you really really want this machine to be Windows Server 2012 Essentials, check this article on technet:
    Install and Configure Windows Server 2012 Essentials
    How to wipe out HDD
    P.S. As Milosh sugested, please do a backup first
    Backup your system, programs, and files
    Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights.

  • Installing Windows 7 with Bootcamp and then XP or Vista over it

    Hi
    I want to know if it is possible to install windows XP or Vista over Windows 7 that has been installed via Bootcamp.
    I am currently using OS X Lion 10.7.3.

    You can use Microsoft Windows 7 Home Premium, Microsoft Windows 7 Professional, or Microsoft Windows 7 Ultimate with Boot Camp 4.0. Windows XP and Windows Vista are not supported with Boot Camp 4.0.

  • How can I unistall Vista from Satellite L300-11Q and install Windows XP

    Hello!
    Help please: How can I unistall Windows Vista from my notebook and install Windows XP?
    Should I do something with discs and BIOS before it, or I can just format disc C and then install XP from CD-disc?
    How can I make a recovery disc before uninstalling Vista?
    Thank you very much!

    Greetings,
    I had such a hard time finding exact information on downgrading Vista to XP recently, I'm posting this on several different threads in hopes I can save others some time and effort; sorry for cross-posting.
    When installing XP over Vista, instead of worrying over getting Intel Matrix Storage, streamlining a CD with it and SPII, blah, blah, blah, why not just go into BIOS at startup and switch the SATA setting under Advanced Disk Management from (whatever the default is) to "Compliant"? This allows the XP install to see the drive as an IDE, (actually ATA), and POOF! Your problems are solved with a LOT less hassle. (The XP install disk DOES have to have Service Pack II on it.)
    I just did this over the past weekend, and it worked great. (Actually I didn't have much of a choice, as the processor on my Toshiba is an AMD, not Intel, so all the downloading and configuring CD's with matrx storage in the world wouldn't have done me a bit of good; the AMD processor "chipset" is contained within the graphics driver setup.)
    Save yourselves a lot of time and headaches and forget the whole matrix storage thing. As far as I can tell it would also work with an Intel processor, but since you can "turn SATA off", IMHO it's a huge waste of time mucking around with the matrix storage. If you want full SATA configuration after all's said and done, you can always go back in and turn the BIOS switch back to SATA after you have XP up and running and have just used the executable to install the matrix drivers.
    Cheers,
    Kutsavi

  • Help!  Can I still install Windows Vista through Bootcamp?

    I am currently running Lion 10.7.3 on my MacBook Pro. 
    When I purchased this laptop 2 years ago, Bootcamp allowed me to create a partition and install Windows Vista.   Then, over time I upgraded to OS X Snow Leopard and then Lion.  Never really paid attention to the bootcamp . . upgrades that came along with the system upgrades until now.
    I was having issues with my Windows Vista Partition, so I decided to use Bootcamp to remove the Windows partition (with the thought that I would just re-create it and start fresh).  Easy right?  Wrong.   Now, bootcamp won't allow me to install Vista. Only Windows 7.  I don't want to run out and buy Windows 7 when I have a perfectly good (if you can call Vista good lol) copy of Windows . .    I only need it to run a thermal printer for UPS because it is not compatible with MAC.
    IS there any way to get around this and install Vista on the partition instead of windows 7?   If so . . how?
    My gosh I am actually wondering if it's cheaper to run out and buy a cheapo Acer computer for $250 . . then to deal with this headache.
    Any suggestions?

    Vista is not supported by Lion. There are no drivers.
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    http://www.apple.com/support/bootcamp/
    http://support.apple.com/kb/HT4410

  • Can you install Windows 7, then revert to a backup image of Vista with Rescue & Recovery?

    I have a copy of 7 I want to put on my T61.  I've partitioned the OS into one partion, and the files into another. 
    I've made backup copies of the OS with Rescue & Recovery already, so can I install Windows 7 over Vista, then if I find I don't want to stick with it, recover back to Vista?
    T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M

    When you get to BOOTCAMP, that has to be changed from FAT to NTFS but you have to click Advanced Option.... button in order to change to NTFS.
    The GPT error message can happen if you have more than one internal hard drive (say SSD and TB model).
    If you didn't use Assistant, and some have managed, undo the partition.
    Paragon CampTune $19 can also assist with installing Windows, creating the partition - but may not work with Lion, though you aren't there yet.

  • Pavilion with vista can i custom install windows 7 or 8?

    seems we over paid for a blue screen. It had vista, now nothing. Wondering if we can
    custom install Windows 7 or 8? Thanks

    Whoa I am understanding very little here. What did you overpay for? Blue screen? Now nothing? What model is it? As a general rule if it runs Vista it will run 7 and likely even 8. But of course you will have to buy Windows 7 or 8 to make it legal. If you want detailed help we really need to know your specific model number and if you are having problems I hate to tell you to try to install software on defective hardware. 

  • Installing Windows Vista on external HDD

    I know there's going to be problems and most people would be happy just to say 'it can't be done', but I really need to install Windows Vista on an external HDD using FireWire 800.
    I have read some brief info on the Internet that some people have achieved this for Windows XP using an external USB 2 mass storage device 'HDD' (and even for large capacity flash drives).
    Personally, I only intend to use a hand full of programs for Vista on a regular basis and prefer not to install what maybe a more stable and reliable XP version of Windows due to having such a dull looking interface that makes you want to jump off the nearest cliff (the interface and look is that depressing.. Really!). Anyway, I have the new MacBook Pro 17" 'unibody' and an external buss powered (on 800) G-Tech G-Drive mini with Firewire 800/400 & USB 2. I have already formatted the external G-Drive mini and installed Mac OS-X 10.5 on it and it works flawlessly via Firewire 800 once you've chosen it as the 'start-up disk' within System Settings (great for testing and not worrying about things too much if there's problems, having kept the MacBook Pro's own internal HDD intact and clean). I plan on partitioning the external G-Drive's 250GB capacity equally and thus have the mentioned Mac OS-X on one partion and hopefully eventually Windows Vista on the other equal partion.
    This arrangement (if possible) I feel compelled to do because even though I can very easily install Windows Vista onto my MacBook Pro's internal HDD using Bootcamp with minimal hassel, I really don't want to infect my MacBook Pro's internal drive with Windows and all the troubles that Windows can bring. I feel I must keep my MacBook's internal drive clean and trouble free from any possible Windows viruses and spyware, besides I need the maximum capacity of the internal drive. If this all worked, then I would dismount the internal drive within disk utility once booted up in Windows, thus keeping it isolated from any Windows prone attacks or problems.
    Only thing now is I have to find a way if there is one, Boot Camp won't partition the external FireWire 800 drive to ready it for Windows and Windows Vista may not have adequate drivers to enable it's boot from FireWire 800, although I could resort to the slower USB 2 interface that the drive also has on-board.
    Anyone with any solutions? Would using Drive Genius to partition the external drive (on the fly) and readying the intended Windows Vista partition to a FAT 32 structure, help start the process?

    Thoughts? ... I have plenty!
    For now, I've had no choice but to install Vista on my MacBook Pro's internal drive using BootCamp, it will only be for the short term until I can find a way to do this on the external drive... it's also another worry to know that I may have problems with the 'boot table' after a few months, as you previously mentioned.
    So setting up Windows Vista, updating, tweaking settings and getting it all working so that it functions properly to a half decent state is such a lengthy laborious tediously frustrating task with windows and taking huge amounts of time that it reminded me of just how much I have recently grown to hate windows and it now amazes me to think that until a year and a half ago I wouldn't move/budge from windows because of all the PC programs I had, but now I'm overwhelmingly relieved I made the jump and wonder why I put myself uneccessarily through so much pain and tourment.. well, even now windows isn't giving up without a fight as it continues to leave it's legacy because although I've now got it reasonably functioning under 'BootCamp' having installed Vista on my Mac's internal drive (for now), windows now bombards me with a routine of error messages upon boot-up stating:-
    "Warning: Unrecognized partition table for drive 80. Please rebuild it using a Microsoft-compatible FDISK tool(err=4). Current C/H/S=266305/255/63 (hd0,2) Filesystem type is ntfs, partition type 0x7 chainloader /bootmgr"
    it then repeats that error message several times during a few black screens (not the infamous blue screen) and on one occasion the error message refers to "(hidden sectors=0x1ee648800)" and there's plenty more double dutch info before it finally load Vista.. (I've only had Vista installed on BootCamp for a couple of day's now - since this reply) I'm considering trying my luck with installing Vista 64bit edition, having read that it is compatible on the Mac Pro and MacBook Pro's.
    Meanwhile... with regard to using an external hard drive for a possible bootable Windows Vista over Firewire 800, I may have to consider the two 'close' alternative methods for doing this.. the first being the alleged workaround-fix shared on the internet for doing this using the USB 2 conection method, unfortunately this requires some time spent on editing some of the startup/installation sequence files which have to be extracted from the Windows installation '.iso' disk image using winiso, then edited and then inserted back into the '.iso' Windows install disk to burn onto a new DVD, trouble is this takes time which I don't have and it may only be a workaround solution for the very dull and bland looking windows XP version only which I don't want... Therefore I might have to go along with the more expensive option of having to invest in a slightly (actually a lot) more costly version of small portable external bus powered hard drive, the G-Tech G-Raid mini2 which has the inclusion of the eSATA interface making it a quad interface, therefore possibly enabling windows to boot from this as windows requires SATA connection for boot-ability. The only drawback for me personally with this second method is a). that I've already purchased the G-Drive mini1, b). the G-Raid mini2 is very costly, c). the mini2 is double the size being double the thickness and therefore not as tiny as the mini1 which you can squeeze into your MacBook Pro case's pocket, d). the mini2 will have a heavier battery drain having its two disks spinning instead of one like the mini1, and e). you have to have two cables connected between MacBook and mobile hard drive instead of one, one cable drawing the power from the Firewire 800 bus and the second cable transferring the data between the eSATA connection (if it works).
    Alternatively.. Apple may save the day and at some point release a driver for BootCamp to enable Windows Vista 'Firewire 800 boot-ability support'. That would be very good! (but doubt that would ever happen with Apple's strange outlook on Firewire of late)
    Or, G-Tech may put an eSATA connection interface/port on an updated version of the tiny, less power draining and more budget conscious G-Drive mini1 in the near future! (but that may be unlikely as well)
    So, I'm not sure what to do at this moment.

  • How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)

    This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
    I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
    here. Maybe this helps other users.
    I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
    Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
    The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
    The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
    You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
    I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
    never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
    You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
    Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
    products.
    Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
    Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
    Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
    Open a command prompt. CD to the following directory:
    \Program Files\Common Files\Lenovo\BMGR
    On a german language system (like mine) it is
    \Programme\Gemeinsame Dateien\Lenovo\BMGR
    If you have an older IBM system the directory may be named
    \Program Files\Common Files\IBM\BMGR
    or something like that. Maybe you need to search around.
    In the following, I will call this the "BMGR dir".
    Enter the following command:
    bmgr32 /info /v
    You should get an output similar to this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    It's a Lenovo  MBR
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? (512)  Label is SERVICEV
    Using version 2.05 of Lenovo Boot Manager
    Reading: \\.\PHYSICALDRIVE0
            MBR Sector 1 Index: 1   Checksum: 00    Disabled
            MBR Sector 2 Index: 4   Checksum: 03    Passed
            MBR Sector 3 Index: 5   Checksum: FD    Passed
            MBR Sector 4 Index: 6   Checksum: 58    Passed
            MBR Sector 5 Index: 7   Checksum: 96    Passed
            MBR Sector 6 Index: 8   Checksum: 7F    Passed
            Data Sector  Index: 3   Checksum: F1    Passed
            Original MBR Index: 2   Checksum: BD    Passed
            No Patch Sectors
            Checksum Byte: 00
            Think Flag: 1
            WinPE Partition (0-3): 1        Alt Boot Partition (0-3): 1
            Boot Config: 2 (Service Partition containing two Service OS's)
            Boot State: 0                   Alt Boot Flag: 0
            (Normal booting operation, will boot to Customer OS)
            RRU: 00000000 00000000          Prev Active Part: 255
            Previous Partition Type: FF     Patch IN: 0     OUT: 0
            CIRT Disabled
            TOC: 0000000000000000           Lock: 0
            Show Error: 0                   Halt on Error: 0
            CIRT Load Return: 0
            CIRT Execute Return: 0
            Pause Duration: 10              Scan Code: 0085
            F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
            Check Msg: There has been a signature failure
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   239 255 255           63    301296177
     1   0x00   0x12      0 193 255   239 255 255    301296240     11279520
     2   0x00   0x00      0   0   0     0   0   0            0            0
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
    partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
    for you.
    Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
    Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
    Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
    Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
    bmgr32 /info /v
    The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
    shows a smaller value.
    Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
    Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
    DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
    environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
    Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
    Continued in the second post...

    Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
    Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
    Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
    bmgr32 /info /v
    The output will now look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    Opened Master Boot Record to see whose MBR it is.
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   254 255 255           63    109675692
     1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
     2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
    Otherwise the following step will likely screw up you harddisk.
    Enter the following command (case sensitive?):
    bmgr32 /Fbootmgr.bin /m0 /IBM /v
    The output will look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
    installing MBR
    finding free sectors
    Sector 9 is free
    Sector 10 is free
    Sector 11 is free
    Sector 12 is free
    Sector 13 is free
    Sector 14 is free
    Sector 15 is free
    Sector 16 is free
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
    Setting Think bit
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
    Enter the following command:
    bmgr32 /info /v
    The output will now look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    It's a Lenovo  MBR
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
    Using version 2.05 of Lenovo Boot Manager
    Reading: \\.\PHYSICALDRIVE0
            MBR Sector 1 Index: 1   Checksum: 00    Disabled
            MBR Sector 2 Index: 11  Checksum: 03    Passed
            MBR Sector 3 Index: 12  Checksum: FD    Passed
            MBR Sector 4 Index: 13  Checksum: 58    Passed
            MBR Sector 5 Index: 14  Checksum: 96    Passed
            MBR Sector 6 Index: 15  Checksum: 7F    Passed
            Data Sector  Index: 10  Checksum: 01    Passed
            Original MBR Index: 9   Checksum: 12    Passed
            No Patch Sectors
            Checksum Byte: 00
            Think Flag: 1
            WinPE Partition (0-3): 2        Alt Boot Partition (0-3): 2
            Boot Config: 0 (Service Partition containing one Service OS)
            Boot State: 0                   Alt Boot Flag: 0
            (Normal booting operation, will boot to Customer OS)
            RRU: 00000000 00000000          Prev Active Part: 255
            Previous Partition Type: FF     Patch IN: 0     OUT: 0
            CIRT Disabled
            TOC: 0000000000000000           Lock: 0
            Show Error: 0                   Halt on Error: 0
            CIRT Load Return: 0
            CIRT Execute Return: 0
            Pause Duration: 10              Scan Code: 0085
            F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
            Check Msg: There has been a signature failure
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   254 255 255           63    109675692
     1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
     2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    So you have actually regained the Lenovo bootmanager. But you are not done yet.
    Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
    Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
    Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done!

  • How do I install Windows Vista on my New Macbook Pro

    I need to use DOS for work to fill out reports for my organization. I have the newest 15.4 macbook pro with intel core 2 duo. I want to know the exact steps to install windows vista on my computer?? please help me.

    It depends on what you want to use Windows for, are you going to work mainly in Windows or OSX? Will you need to cross between the two and if so will restarting your computer be a pain?
    I use Paralles, a copy of that is around $75 as far as I can remember.
    Personally I had a copy of Windows XP so that was the first Windows OS I used with Paralles, then Vista came out so I though I would get a copy as it was supposed to be * the * Windows OS, when I installed Vista I was so dissapointed with it. I would go as far as say it is one of the ugliest OS's I have seen, I actually prefer XP, it's like the old space programs when you look at the sets, they made an effort but you can see the budget was low, it looks like a really poor effort at copying OSX but they didn't spend the money on doing it right.
    Anyway, I just use XP so Vista for me was a waste of money. XP works faster and is more intuitive than Vista 'If Windows can be intuative that is'.
    I also read out there that security in Vista isn't what it is cracked up to be.
    Hope this helps.

  • Qosmio G20 Vista drivers? Not needed to install Windows Vista

    Hello,
    I am new at this forum. My name is Francisco and I live in Brazil. I own a Toshiba Qosmio g20_105 and it is running Windows Vista Ultimate EN RTM 6000 without problems.
    To do this, you must perform a fresh install of Windows Vista. The drivers for network (Intel PRO100),for audio (Soundmax), for TV (Toshiba PCI Tuner), modem (toshiba modem), Alps pointing device are installed directly from microsoft. You must install Toshiba nvidia display driver, Toshiba Bluetooth (monitor and stack), Toshiba texas flash media driver, toshiba RAID (driver and utilities), toshiba remote control manager and ConfigFree for Windows Vista.
    You must have the Toshiba RAID drivers to install from the windows Vista DVD. Otherway, Windows does not recognize Toshiba RAID 0 and RAID 1.
    Below some pictures of my G20 Desktop screen:
    http://www.rabayjr.com/vista/myqosmiog20screen1.jpg
    http://www.rabayjr.com/vista/myqosmiog20screen2.jpg
    http://www.rabayjr.com/vista/myqosmiog20screen3.jpg
    And here is an example of using deskscapes animated backgrounds with Windows Vista, called dreamscene.
    It is in paused mode
    http://www.rabayjr.com/vista/myqosmiog20screen4.jpg
    To perform a fresh install of windows Vista:
    Please, download the Toshiba RAID drivers from here:
    http://www.rabayjr.com/vista/drivers/raid.rar
    1. Copy the contents of this archive onto a floppy disk, CD, DVD, or USB flash drive.
    2. Insert your Microsoft Windows Vista Edition Bootable DVD.
    3. Power on your computer and press F12 to display the boot menu.
    4. Choose the option to boot from the CD/DVD drive.
    5. On the first setup screen, choose your language options then press "Next".
    6. Press "Install Now".
    7. Type in your Product Key then press "Next".
    8. Accept the license terms by checking the box then press "Next".
    9. When asked "What type of installation do you want", press "Custom (advanced)".
    10. When asked "Where do you want to install Windows", make sure your media containing the Toshiba RAID drivers is connected to the computer, then click on "Load Driver".
    11. Browse to the location you have copied the RAID drivers to then press "OK".
    12. Setup will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
    13. Make sure the TOSHIBA RAID driver is selected then press "Next".
    14. Continue the installation of Windows Vista as normal.
    Now you will need the Toshiba drivers for your Qosmio G20:
    See the Device manager info:
    http://www.rabayjr.com/vista/qosmiodrivers1.jpg
    Drivers:
    1. SD memory controller
    http://www.rabayjr.com/vista/drivers/SD_memory.rar
    2. Bluetooth monitor and stack
    http://www.rabayjr.com/vista/drivers/bluetooth_mon.rar
    http://www.rabayjr.com/vista/drivers/bluetooth_stack.rar
    3. Nvidia display driver GeForce Go 6600
    http://www.rabayjr.com/vista/drivers/nvidia97.52.rar
    4. Texas FlashMedia controller
    http://www.rabayjr.com/vista/drivers/flasmedia.rar
    And finally the Toshiba utilities:
    Toshiba Configfree
    Toshiba Assist
    RAID utilities
    Remote control manager
    Toshiba SD Memory utilities
    That's it...
    So I must tell to you that Toshiba Qosmio G20 is Windows Vista Ultimate capable, indeed.
    Hope this helps people who need and want to install Windows Vista Aero on their Qosmio G20 machines.
    Message was edited by: FranciscoJr

    UPDATED POST: On March 08, 2007
    This is a step by step guide for those of you with problems to get Windows Vista functional on your G20 Qosmios
    Use a Windows Vista English Version RTM Ultimate 6000 DVD for installation.
    1 Backup your personal files and important data to a removable device, CD, DVD, flashmedia, pendrive, etc...
    2.Check your Qosmio player installation. if nedeed, reinstall it with the latest version (multilanguage), posted on Toshibas site (download drivers section).
    3.Download and copy the Toshiba RAID drivers to a removable media
    Please, download the Toshiba RAID drivers from here:
    http://www.rabayjr.com/vista/drivers/raid.rar
    4.To perform a fresh install of Windows Vista, Follow the steps below
    -1. Copy the contents of this archive onto a floppy disk, CD, DVD, or USB flash drive.
    -2. Insert your Microsoft Windows Vista Edition Bootable DVD.
    -3. Power on your computer and press F12 to display the boot menu.
    -4. Choose the option to boot from the CD/DVD drive.
    -5. On the first setup screen, choose your language options then press "Next".
    -6. Press "Install Now".
    -7. Type in your Product Key then press "Next".
    -8. Accept the license terms by checking the box then press "Next".
    -9. When asked "What type of installation do you want", press "Custom (advanced)".
    -10. When asked "Where do you want to install Windows", make sure your media containing the Toshiba RAID drivers is connected to the computer, then click on "Load Driver".
    -11. Browse to the location you have copied the RAID drivers to then press "OK".
    -12. Setup will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
    -13. Make sure the TOSHIBA RAID driver is selected then press "Next".
    -14. Continue the installation of Windows Vista as normal.
    5. Go to Microsoft update and download all important updates available. If you wish you can install your native language, if other than English, from the Microsoft site.
    let Windows install all the drivers found for your Qosmio G20.
    6. Reboot your machine and follow with the steps below.
    DRIVERS YOU MUST INSTALL:
    1. Alps pointing device driver (This is from Alps and working fine with your Qosmio G20)
    http://www.rabayjr.com/vista/drivers/alpsdriver.rar
    http://www.rabayjr.com/vista/qosmioalps.jpg
    During the installation, Windows will complain that you are installing an early device driver. Do not attempt to this, Install it anyway.
    This is because the Windows driver for this device is originally installed with a more recent date and version from that you are trying to install.
    But the driver posting here is the correct from the Alps for your Qosmio g20.
    2. Bluetooth monitor and stack
    http://www.rabayjr.com/vista/drivers/bluetooth_mon.rar
    http://www.rabayjr.com/vista/drivers/bluetooth_stack.rar
    3. Nvidia display driver GeForce Go 6600
    http://www.rabayjr.com/vista/drivers/nvidia97.52.rar
    To install the nvidia 97.52, you must do it manually:
    open the Device manager
    look for the Video adapter/nvidia Gforce go6600
    Driver update options
    Look for a driver in computer
    Choose a list of device drivers in computer
    With disc...
    Lool for the place you've extracted the nvidia 97.52.rar
    Find the nvts.inf and open it
    You will come to the following screen:
    http://www.rabayjr.com/vista/qosmionvidiainstall.jpg
    From a list choose your video card (go6600) and install it.
    If you think it is difficult, please see the VIDEO Nvidiainstall.avi:
    http://www.rabayjr.com/vista/drivers/nvidiainstall.rar
    After the extraction, play it with Windows media Player
    4. Texas FlashMedia controller
    http://www.rabayjr.com/vista/drivers/flasmedia.rar
    5.SoundMAX integrated digital audio. Driver 5.12.1.5410
    http://www.rabayjr.com/vista/drivers/soundmax5.12.1.5410.rar
    run the setup.exe and at first remove the driver you have installed on your Qosmio G20.
    reboot the computer
    Run the setup.exe again and install the new driver. At some install point, Windows Vista will need a confirmation, if you trust Analog devices incorporated to goes on..
    http://www.rabayjr.com/vista/qosmiosoundmaxinstall.jpg
    Continue with the installation and after finishing the process, test the functionallity of the new driver
    OR
    If your G20 model is using the Sigmatel HD audio chipset, so you must install other driver than the Soundmax integrated digital audio
    It is the SigmaTel HD Audio Driver for Windows Vista Version: 6.10.0.5324
    link:
    http://www.rabayjr.com/vista/drivers/sigmatelhd.rar
    6.Intel PRO Wireless 2200BG Vista version 9.1.0.115, including the Intel chipset identification utility.
    http://www.rabayjr.com/vista/drivers/intel_wireless.rar
    And for the Utilities you can download them from here:
    1.Toshiba Configfree
    http://www.rabayjr.com/vista/drivers/configFree.rar
    2.Toshiba assist
    http://www.rabayjr.com/vista/drivers/assist.rar
    3.Raid utilities
    http://www.rabayjr.com/vista/drivers/raidutil.rar
    4.Remote control manager
    http://www.rabayjr.com/vista/drivers/rcm.rar
    5.Toshiba disk creator.
    http://www.rabayjr.com/vista/drivers/disccreator.rar
    6.Picture enhancement utilily.
    http://www.rabayjr.com/vista/drivers/picenhan.rar
    You can select your desired screen brightness and the monitor input settings:
    monitor-in (rca normal or S-VHS plug in) when using your Qosmio as a monitor in for your VCR, DVD, Playstation, etc.
    For using TV as monitor-in you also can switch from NTSC to PAL video system.
    For screen brightness: This adjust affects the image of your DVD player software or when watching your DVD via media Center 2005
    http://www.rabayjr.com/vista/qosmiopicenh.jpg
    After installation this utility appears into the Toshiba Assist Window, on Optimize category as shown in the picture above.
    As the Toshiba Media (Top) buttons are not working by now, you can use the HotKey (Fn+4) which is working 100% , to toggle from Normal screen input(4:3 aspect)
    to wide screen input (16:9 aspect).
    Press the Fn+4 once and your monitor video in is 4:3 mode, press again and the monitor video in is 16:9 mode, press once more and the image returns to your lcd normal. screen.
    7. SRS Audio Sandbox utility (enhancement) for you soundmax audio experience
    The sandbox will allow you to process any audio in your system with one of three SRS technologies:
    WOW HD: Provides enhanced width, bass and definition for music sources.
    TruSurround XT: Virtualizes multichannel content for listening on two speakers,
    with post-processing enhancements.
    CX Xtract: Provides enhanced multichannel virtualization by combining TruSurround XT
    with Circle Surround II.
    link to download:
    http://www.rabayjr.com/vista/drivers/srs.rar
    8.Toshiba value added package:
    About the Toshiba Value added package for the G30, you can install it on the G20, but only some of the items, otherwise you will have conflicts with Windows mobility center.
    Do not install the Toshiba energy control. Designed only for the G30 model.
    It Maintains the Windows mobility center funcionality and the Toshiba Buttons (FN + F1, F2, F3, etc...)will be OK.
    9.Toshiba extended Tiles for Windows mobility Center.
    http://www.rabayjr.com/vista/drivers/tileswmc.rar
    10.Microsoft photo info.
    http://www.rabayjr.com/vista/drivers/photoinfo.rar
    OBS: All the downloads are directly from my FTP server. 100% secure. No Virus. No spywares
    Francisco

  • I want to install Windows 7 in bootcamp on my imac with Lion 10.7, but only have a Windows 7 upgrade disk.  I also have a full Vista.  Can I install in bootcamp using the Windows 7 upgrade disk?  If so, what do I need to know about how?

    Hi,
    I want to install Windows 7 on my imac in bootcamp.  I have a windows 7 upgrade disk and a full vista disk.  Normally on a PC I would install Vista, then upgrade to Windows 7.  I see that bootcamp 4 only supports Windows 7.
    Can I install the Windows 7 upgrade disk without first installing Vista?  Will this work in bootcamp?
    Thanks,
    Jim

    Install 7. Don't bother with applying drivers and such, just reboot again from DVD and install again, it will see the existing system and this time activation will be possible.
    Vista is mess, takes longer etc. Hope you have SP1 version of 7. And for Vista, only SP2+ are even supported now, by MS.

  • Hp Mini 5101 Freezes While Installing Windows....All versions, xp,vista,7,8.....Nothing Takes

    I refurbish companies retired computers as part of my business, part of our agreement is the machines all come blank, they delete partitions and wipe the entire hdd multiple times prior to my getting them, Most are as simple as reinstalling windows and any missing drivers and they are complete machines again, I currently have been working on an hp mini 5101 off and on for a couple of weeks now that I have been unable to get to take a copy of windows, and I have tried them all, xp, vista, 7, 8 and none have taken, I tried running ubuntu as a live cd and same as windows during the gui windows loading screen the machine freezes, I even tried popping the hdd out and throwing it into my other hp machine and doing a windows install with an hp windows 7 32 bit install disc, when installed hdd back in machine it again freezes when it reaches the animated windows graphic, I have searched forums, here and the internet in general, and have found no other mention of this occuring, i have found reference to the screen doesnt support it so people see the vista screen instead but i see the windows 7 screen then freeze during the animation. I am assuming (yes i know what happens when you assume, thats why i am here asking for help) this is somehow bios related from their prior use of the machine, I had some toshibas that come in that required a certian mode be changed from ahci to compatablity in order to install windows, I know that the company that had it got it with a vista key and an xp downgrade, I am trying to install 7 on it.
    Any other information I may have left out let me know,
    Thank you for any help you may be able to give

    Hi MidwayIT,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Mini 5101 and freezing after loading Windows. If it freezes on the loading screen it could be the graphics card. Have you performed a hardware test?
    Please let me know.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Can i install windows 8.1 over xp in bootcamp

    Can I install windows 8.1 over xp in bootcamp?

    Is it on the system drive? on its own drive or is it large enough?
    Windows 8.1 will run even without Apple's drivers just fine except for a couple items.
    Boot Camp forum probably is best place.
    Boot Camp is software (and a forum) as in drivers and Boot Camp Assistant.
    You have to do a "custom" clean install, you can't upgrade from within XP, you should of course be using 64-bit and Pro for supporting two cpus.

Maybe you are looking for