Installing Windows 7 RC on T400 -- drivers required for setup
When Windows 7 RC was released, I immediately installed it with no issues.
I have since returned to Vista as there was a lack of W7 drivers initially.
Now that this has been overcome with Lenovo releasing beta drivers, I tried installing it again this week to no avail. W7 setup points me to install a driver after choosing "Install now" at the first screen. I have attempted to install the Intel SATA driver but it still says the driver is incorrect.
This has never occurred to me before -- whether installing Vista or Win 7 beta 1 or Win 7 RC. I have attempted to install from DVD, USB HDD and USB thumb drive. All three media have returned this same error message which I cannot get through. Anyone else experience these difficulties?
Finally managed to resolve this problem by re-downloaded Windows 7 RC DVD ISO.
To spot whether the problem is going to apply to you, when booting to Windows 7 RC setup, check whether the "progress bar" is the Vista green scrolling nub or Windows 7 "Starting Windows" flower. If the former, then the installation source is broken. Re-downloading and copying to whatever medium you're installing from (USB thumb drive, USB HDD, DVD) would solve the problem.
Similar Messages
-
I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipodI reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.
-
"Windows cannot verify the digital signature for the drivers required for this device."
When I connect my iPod to my laptop, it only connects for about 10 seconds before disappearing. If I look at the iPod's properties in the Device Manager, it says:
Windows cannotverify the digital signature for the drivers required for this device. A recenthardware or software change might have installed a file that is signedincorrectly or damaged, or that might be malicious software from an unknownsource. (Code 52)I would uninstall and reinstall the Apple software. See the following. The following also has a link for Win7/Vista
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
Windows cannot verify the digital signature for the drivers required for this device. Code 52
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52).
I have reinstalled, uninstalled, the whole 9 yards.See the driver topic of:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
Windows cannot verify the digital signature for the drivers required for this device. A recent hardw
windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is singned incorrectly or damaged, or that might be malicious software from unknown source (Code 52)
Hi,
What are you trying to do ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I keep getting an error message that reads: There is a problems with this windows installer package A program required for this install to complete could not be run. Contact your support personnel or package vendor. How do I correct this problem. HELP !!!!!!!!!!!!!!
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I went to upgrade itunes and when it finally downloaded, i got the following message: There is a problem with this windows installer. A program required for this install to complete could not be run.
I was advised to unistall the old itune, which i did and then loaded the latest itune 10.5 i think. It dowloaded fine to a point and before finishing, it came up with the same message.
Is the problem with the itune installer or my windows installer on my laptop?Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
When `ve downloaded the latest itunes and then i go to install it i get a message saying there is a problem with this windows installer package a program required for the install to complete could not be run, contact your support personnal or package vendor any ideas anyone ? thanks
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
i neen try to down load the new itunes 10.5 for windows vista but for some reason it is not working at all . this is what it show for the errors is "there is a problem with this windows installer package . a program required for this install to complete could not be run. contact your support personnel or package vendor" plz help me with this!!!!!!!
Repair your Apple software update.
Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
Start > Control Panel > Programs n Features > highlight ASU and click CHANGE then REPAIR, -
I keep getting this error message that says "There is a problem with this windows intaller packaage.a program required for this install to complete could not be run.contact ur support personnel or package vendor" what does it mean? and how do i fix it?
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I had itunes set up and working since i have had my iPhone and iPad. One day it asked to be updated, so i did. After it updated it stopped working because whenever i tried to open it it would say "this shortcut has either been deleted or moved would you like to delete this shortcut". This kept on happening so I uninstalled it and tried to reinstall it, but then comes my second problem. While itunes is downloading an error pops up saying "There is a problem with this windows installer package A program required for this install to complete could not be run contact your personnel or package vendor". This is my main problem and i don't know how to stop it i have tried a disc clean up, De frag and trying to completely take everything to do with itunes off my computer, but it still doesn’t work. HELP ME!!! I NEED ITUNES!!
Repair your Apple Software Update
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU in All Programs, go to Control Panel/Programs n Features(Win7 or Vista) or Add & Remove Programs(XP) -
trouble updating itunes - this message appears "there is a problem with this windows installer package. a program required for this install to complete could not be run"
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
when i run installation itunes,i see this massage "there is a problem with this windows installer package.a program required for this install to complete could not be run. contact your support personnel or package vendor."please help me for installation itunes on my pc completely.
Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm. So will have to wait
-
Im having a problem updating my itunes. Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run. can anyone help?
Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Drivers required for HP 15-r006tu Notebook
Hello Everyone,
I am looking for System Drivers required for HP 15-r006tu Notebook Laptop - Windows - 7 Ultimate - 32 Bit Operating Sysytem,This is urgent requirement and this decesion was taken by our Office Managements.
Could anyone please help me on this.
Regards,
MeeraghavaHi:
Most of the W7 32 bit drivers from the HP Probook 450 G1 should work on your model, excep the audio driver.
Your model uses the Intel HD graphics driver.
DO NOT USE ANY BIOS OR FIRMWARE FILES FROM THIS MODEL
http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5405424&ac.ad...
Audio: Accept the agreement, download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
Maybe you are looking for
-
HP ePrint Home&Biz for HP 2600n
Your page for the above Android app says, "Compatible with all smartphones and tablets that run Android 2.1 or later. Works with HP ePrint-enabled printers, legacy networkable printers and all-in-ones." I'm trying to print on my HP Color LaserJet 260
-
There are quite a few having problems related to container.exe due to updating to 3.6.4 as I see from this forum. I don't have video problems, never did, and sounds like if I update, it's going to start having problems.. It is possible for ff to make
-
Cómo desplegar Apache CXF Web Services en OC4J
Hola a todos tengo este problema: He realizado una web service con apache CXF, al desplegarlo en tomcat todo funciona bien pero cuando lo despliego en oc4j 10g R2 no funciona, he estado leyendo y me dicen que tengo que configurar oc4j para cxf pero n
-
Hello All, We are trying to add an iFrame to a Custom WebCenter Portal page which also has an af:tree component. We are adding the iFrame through the f:verbatim route <h5> <f:verbatim rendered="true"> <iframe name="formsLauncher" width="5" height="5"
-
Greetings all I want to find a particular word in a string example string: SELECT CUSTOMER.STUDENT."NAME", CUSTOMER.STUDENT." FROM DATE" FROM CUSTOMER.STUDENT i want to grab the FROM WORD from the above string . search condition: There must be a spac