Installing Windows 7 using USB sd on IMAC
Hello everyone,
I have tried everything I could to make this work but it's not.
Computer spec:
IMAC 8,1
Yosemite
Dead superdrive (of course).
I'm trying to install Windows 7 64 bit Ultimate using bootcamp.
I've started out using an external DVD drive with the Win7 .iso but suddenly that drive will not allow me to write to it. Maybe it died too but it can read DVD's
So, I'm back to my original plan of using a SD stick but bootcamp assistant doesnt recognize the stick because the machine has a DVD drive.
I tried the hacks that require changing the .plist file to trick bootcamp into thinking I have a computer without built-in DVD but those didn't work.
Thanks for any help!
Please see Bootcamp Windows 7 Install Problem.
Similar Messages
-
I have an intel based mac with 10.6.8 mac os x. How to install windows 7 using usb as the bootcamp doesnot have the option of creating a bootable usb. please help
Welcome to Apple Support Communities
You can install Windows from a USB drive in one of these computers:
- MacBook Pro with Retina display.
- Mac mini (Mid 2010 and newer).
- MacBook Air.
- iMac (Late 2012).
If you don't have any of these Macs, you can't install Windows through a USB drive. Instead, buy Windows on a DVD. Follow Apple's steps > http://support.apple.com/MANUALS/1000/MA1519/en_US/Boot_Camp_Install-Setup_10.6. pdf -
Cannot install windows 8 using usb stick on G400s FreeDOS version
I'm having some difficulties to get windows 8 installed on this laptop. is there any secrets or tricks on BIOS that I'm not aware of?? I have installed windows 8 on many laptops using same pendrive without having trouble previously.
I have tried legacy mode and UEFI mode/boot without any luckhi wayne07,
Thanks for using Lenovo Community Forums!
Inside BIOS
Under Boot Tab
Change Boot mode to Legacy
USB Boot should be enabled
Under Security
Secure Boot Has to Be disabled
In case the options above are grayed out in your BIOS, Got to Exit Tab and Change OS Optimized Default to Other OS
and check the options again.
Once All are Set Make sure to save all changed by hitting F10 and enter for Yes
After Hitting enter It will Restart and You have to keep on tapping F12
this should pull up the Boot Menu letting you select where to boot. You should have now your USB Stick as an Option.
Let me know your findings
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
When Installing Windows 7 using Bootcamp, I get message: "Need 64 bit Windows installation USB drive or DVD." What does this mean?
It means you need the 64 bit Version of Windows on a USB stick or DVD.
-
Hello. I have a mac-mini (mid 2010) and with bootcamp, was successfully running XP.
I then decided to upgraded to Windows 7 had lots of trouble installing it on my existing bootcamp partition.
I finally was able to install Windows 7, by just booting off the CD and letting it install that way.
But reading more on it, I think I was supposed to use Bootcamp to do it for me...
I had thought the Bootcamp Assistant was for only fresh installs of a Windows O.S. where no partitiion existed previously.
I had a partition so thought Bootcamp wasn't required for my needs.
But now, inside Windows 7, I have 0 drivers installed. I have an AirPort Express, so on the Mac side, I downloaded
and installed the Windows version of AirPort Utility and copied it to my USB stick. Then
I exported my settings to a text file on a USB Stick, then on Windows was able to successfully install AirPort Utility and import the settings.
But it still doesn't find my network. I am pretty sure I'm broadcasting my SSID...
So I need to know the following:
1) How to know I'm broadcasting my SSID - where do I find this in settings?
2) How I can install my mac-mini drivers on Windows 7 so I can use my existing wireless network, now that I've gone through the installation without using Bootcamp?
3) Do I need to set up network adapters and all that stuff in Windows 7 first? If so, how and what drivers do I need?
One other thing I tried was downloading Bootccamp 4.x and installing that on Windows 7 to see if it gives me the drivers that were supposed to be written to my USB stick if I had installed Windows 7 using Bootcamp in the first place... However I think the message it said was that it couldn't install as it was the wrong version. So I'm still stuck without drivers and therefore no internet.
And that is my main task - getting the Internet up and running in Windows 7.
Other Info:
I'm running Mac OS X 10.6.8 with 2 GB of memory.
I installed the 32-bit version of Windows 7 and I don't know what version of Bootcamp I'm running...
I can tell you that BootCamp Assistant is v3.0.4, but don't know if that means Bootcamp is also 3.0.4.
Hope you can help.
Thanks.I tried something that worked for me...
Knowing that after my install of Windows 7 wasn't the correct method (didn't go through bootcamp), and the BootCamp 4.x package wouldn't install under windows 7, I tried reinstalling Bootcamp 4.x in Windows 7 to see what the exact message was it gave me. The message said it couldn't install because of a 32-bit O.S. vs a 64-bit version of the package.
So that got me thinging - my XP version was 32-bit, and so is my Windows 7 installation. So I tried installing the bootcamp that came with my Mac OS X installation CD. This is bootcamp version 3.1.
Not only did it install, but it practically took care of everything driver-wise for me. I was then able to see my wireless network, enter my password and I was connected. The only thing else I had to do to get on the Internet was bring IE8 online (guess it ships offline by default). Firewall and Antivirus are now installed, just a few more things to go.
That's one thing that's just not clear that I'll be sure to note for next time... The Bootcamp packages you download are actually driver packages for Windows. That is where the Windows drivers exists that are necessary to make your Windows 7 PC work on a bootcamp partition!
I didn't need the AirPoirt Utility at all (at least, I never went into it).
Thanks VikingOSX for your post. I will not need to follow the steps you provided, but they may help someone else as all of these bootcamp issues I've been reading seem to be very unique per installation.
Hopefully my solution helps others. -
I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?
No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest. -
Installing Windows 7 using bootcamp help
Hi all,
I am planning to install windows 7 using bootcamp to play PC games only, as love mac software for everything else, and want to make sure that all will run smoothly before i buy the required stuff.
I am running OSX 10.8.5 on my iMac, which has a wireless keyboard, wireless trackpad, and wireless mouse, and a connected external superdireve (for CD's and disks, sorry to patronise just wanting to be clear ) and wanted to know if i can install windows using a disk that i buy in a normal pack, as i have heard that the external drives can have problems?
All advice much appreciated!this will install as normal. before installing however you will need an activation key cos in win 7 this is one of the first pages that is presented before instalation.
the key from your relative could possibly work especially if he used your internet connection to register. but this could cause problems with his/your authenticity after 30 days.
the only other option is to purchase a key.
you say a 30 day trial, does it give you a temporary key for this? -
I am trying to install Windows 7 using Bootcamp Assistence 5.0 on a MacBook Pro Retina OSX 10.8.2, I went through all steps on Creatting the Windows 7.iso into a bootable USB Dirve 16GB I use a separate USB Drive 2 GB and download Windows Support Drivers Step 2 on bootcamp assistence. I run into the problem in step 3 when the computer reboot I just get a black screen the back display still on like I can still see the apple on the back lit up, but the screen is black and wont load the window installer, if i shut it down and bring it back up i get error saying IOS not found so then i have to shut it down, enter recovery and restart on osx partition, i can see that the bootcamp partition was created but cant load windows to it. Please can anybody help me or guide me on what i am doing wrong? thank you so much in advance
this will install as normal. before installing however you will need an activation key cos in win 7 this is one of the first pages that is presented before instalation.
the key from your relative could possibly work especially if he used your internet connection to register. but this could cause problems with his/your authenticity after 30 days.
the only other option is to purchase a key.
you say a 30 day trial, does it give you a temporary key for this? -
Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?
My first thoughts were that 'bootcamp' was out of date...needed an upgrade to register windows 7. Since then I am once again met with the same problem... how can it not see the I have already have a paritioned drived ready to be used for installition, is there a way to fix this problem? I don't really want to pay out for 'i-parition' only to merge my 2 drives back into one and start again from scratch =/. Seems silly to do so...what are my options?
Regards Swishi...p.s If anyone can help me...it'll make my day :3.ONE PARTITION.
You don't need to buy anything but you should have backups.
you can delete #2 you created. Then resize to full drive.
There are already
GPT
EFI
Mac
Recovery
and there needs to be Windows which cannot be higher ID
Reading the instructions first and just swallow whatever pride or inidignation. It is a "my way or highwar" setup and utility,.
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/ -
Can't install Windows 7 on my early 2008 iMac
Hey Guys,
I wanted to install Windows 7 on my iMac 24" (3.06 GHz, 4GB RAM, 8800GS)
but everytime I boot up from my CD, it is showing me a black screen with a white flashing cursor. I don't know whats wrong, because 6 months earlier I installed it without any problems (and deinstalled it for more space on my HD) , but now (BTW: I've upgraded to Lion) I'm having this awkward problem?
Any ideas?
thxAre you trying to install Windows 7 using Boot Camp? If you are then please post in the correct forum, the Boot Camp forum.
-
How can I install Windows 7 by USB? MacBook late 2008 10.6.8 Boot Camp 3.0.4
Someone please help...
I have tried software update and no luck. I think my Boot Camp on Mac 3.0.4 is not showing me the right option on creating a USB installation. It asks me to load Windows 7 CD when I don't have it, I bought it online... Every download I tried from Apple is .exe and I am losing hope on this one...You can only install Windows from a USB with one of these Macs:
- MacBook Pro with Retina display.
- Mac mini (Mid 2010 and later).
- iMac (Late 2012).
- MacBook Air.
If you bought Windows in Internet and you got it in a ISO image, you can burn it into a DVD. Simply double-click the ISO image, open Disk Utility, right-click the ISO image in the sidebar and burn it -
Hi,
I want to install captured image using USB. Not sure where I went wrong. here is what I did.
I captured an image(windows 8.1 x64 ) using MDT . I have used the captured image in WDS it works fine. But I wanted to use USB (as the file size is 6GB cant use DVD) to install on remote machines.
Than I converted it to ISO. I followed a step in http://www.ehow.com/how_5750929_convert-wim-file-iso-file.html
Finally I created bootable USB using Rufus (also tried ultraiso). easy ah
But when I boot from the USB it is giving me "windows failed to start"error as if there is no windows file on the USB.
Can anyone please help me.
Thank you very much
SerkiYou can use the wim you captured, and create a new task sequence in MDT. You should then be able to create media to a folder, and copy the files to a USB drive. Once booted, the process should be similar to the WDS process you have used, assuming you used
a MDT task sequence for the WDS deployment.
Here is a walkthrough for Windows 8.1.
https://technet.microsoft.com/en-us/windows/dn481547.aspx -
How to recover administrator password in windows 7 using usb
I have an HP netbook mini and need to how to recover administrator password in windows 7 using usb as we have forgotten and need to load itunes from another Iphone.
This question was solved.
View Solution.Hi,
You could use a reset utility such as the free example on the link below - using another PC, this can be created on a usb flash drive.
http://pogostick.net/~pnh/ntpasswd/
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I tried installing Windows 7 using Boot Camp, but it didn't work.
Although it didn't work, the memory is still divided. So I looked for Boot Camp in aplications, but it literally vanished...
So I tried downloading it again, but I only found EXE files... they don't work on my MacBook Pro...
It's very new... Bought it recently...
Please... I need help to unparticion memory back to original Mac HD and install Boot Camp...
Thanks...Below is the paragraph from the instructions. Follow it exactly and then report what happens at each stage.
How you remove Windows from your computer depends on whether you installed
Windows on a second disk partition or on a single-volume disk.
If you installed Windows on a second disk partition: Using Boot Camp Assistant as
described below, remove Windows by deleting the Windows partition and restoring
the disk to a single-partition Mac OS X volume.
If your computer has multiple disks and you installed Windows on a disk that has only one
partition: Start up in Mac OS X and use Disk Utility, in the Utilities folder, to reformat it
as a Mac OS X volume.
To delete Windows and the Windows partition:
1 Start up in Mac OS X.
2 Quit all open applications and log out any other users on your computer.
3 Open Boot Camp Assistant.
4 Select “Remove Windows 7,” and then click Continue.
5 Do one of the following:
a If your computer has a single internal disk, click Restore.
b If your computer has multiple internal disks, select the disk with Windows on it,
and then select “Restore to a single Mac OS partition” and click Continue. -
i want to instal windows 7 using bootcamp on my mac book pro and how large do i have to make the partition if i want to use it for gaming?
"At least 16 GB of free space on the disk onto which you’re installing for 32-bit, or 20 GB for 64-bit (for Microsoft Windows and Windows-based applications)."
That's what Apple proposes in here Boot Camp: System requirements for Microsoft Windows
Personally I would double these amounts and add to that the diskspace needed for your Windows games.
Stefan
Maybe you are looking for
-
Select All in Mailboxes in iOS
I am looking to find out if there's some shortcut, trick, or hint as to how to do a select all in one of the mailboxes in Mail for iOS. I realize you can Delete All in the trash, which is helpful, but I'm looking for a way to, for example, not have
-
Basic Questions on the Syncing Process
I have a couple of questions about the syncing process. First - does the syncing take place through MobileMe and the so called "cloud" or does it take place through the physical connection of the Touch to the iMac via the USB cable? When I connect th
-
Pages and Mountain Lion Compatibility
I have upgraded to Mountain Lion and have been trying the new features. In trying out Dictation, I've gotten it to work on most of my apps but it will not work on Pages. I'm using Pages 08 and wondering if you need Pages 09 for it to work?
-
Listing of deleted files/folders
i have lost a folder. somehow, i am assuming i had it slected with something else and deleted...and emptied the trash. i have mutliple backups including a mirra drive and a hard backup. all i need to find out is WHEN this happened so i know roughly w
-
MDM integrity between SRM and R/3
Hi All, How MDM integrity of the process validations being made between SRM and R/3 for the creation of different documents. Please share me any documents regarding MDM intergirty between SRM and R/3. This is not related to Catalogs, 1. Creation of d