Installing Windows 8.1 on 2008 Mac Pro

Can I install Windows 8.1 on my early 2008 Mac Pro using Bootcamp?

check this discussion if you want to DL it online and install it now, you'll still need a retail key to activate it
the DL url is there, and the OP there also found what looks like a good link for burning to cd instructions
https://discussions.apple.com/thread/6071093?tstart=0

Similar Messages

Can I install Windows 7 on my new MAC Pro running OSx 10.9

Can I install Windows 7 on my new MAC Pro running OSx 10.9. BootCamp Assistant states Windows 8 or later. Help please!

Neil already gave you the answer. Here is the table repeated in case you accessed the wrong location.
Mac model
Windows 8, 64-bit
Windows 7, 64-bit
Windows 7, 32-bit
Windows Vista, 64-bit
Windows Vista, 32-bit
Windows XP, 32-bit
Mac Pro (Late 2013)
BCA
Mac Pro (Mid 2010)
5
5
4
DVD
DVD
DVD
Mac Pro (Early 2009)
5
5
4
DVD
DVD
DVD
Mac Pro (Early 2008)
4
4
DVD
DVD
DVD
Mac Pro (Early 2007)
DVD
Mac Pro (Mid 2006)
DVD
You should seek additional Boot Camp help in the Boot Camp forum: https://discussions.apple.com/community/windows_software/boot_camp
The Boot Camp Help Guides are located here: http://www.apple.com/support/bootcamp/

Hey. I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all... I searched drivers for the windows 8 32 bit but couldn't find any... Any solutions guys?

Hey everyone,
I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all...
I searched drivers for the windows 8 32 bit but couldn't find any...
Any solutions guys?
Thanks a lot.
Sincerely,
Chiponn

There's been an update for OSX ML which addresses the issue for installing Windows 8 on bootcamp.
It's NOT recommended that you Upgrade.. However, the way to get the drivers is:
You'll need an external USB drive formatted as FAT for this.
1) In OSX, start the Bootcamp Assistant
2) Press Next
3) UNTICK 'Remove WIndows 7 or Later Version'
4) TICK Download the Latest Windows Support Software from Apple
5) Insert USB drive
6) Press CONTINUE
The drivers should download, and copy a WIndowsSupport folder onto the USB drive.
I did notice that Windows 8 still requires beta drivers for some aspects such as VGA (the Radio HD Card), which you can get on the AMD website.
Futhermore, why are you using Windows 8 "32" bit when you blatently have a powerful 64bit?
Anyway, hope this post helps ;-)

Can I install Windows 8 on an older Mac Pro with Mavericks upgrade?

I have an Early 2008 Mac Pro which I just upgraded to Mavericks, which came with Boot Camp 5.1. Can I install Windows 8 on my machine? The information on this site suggests I can only use Windows 7 with Boot Camp 4 on my system, but does this take an upgraded OS into account? Put another way, is the version compatibility determined only by my OS, or also by my hardware (processor, memory, etc.). This is the first time I will be using Boot Camp to install Windows on this machine.

no, it is determined mainly by machine type then by requisite driver support in the OSX
officially, x64 w7 is as far as you can go but google around, i'm sure there have been people who got w8 to work
http://support.apple.com/kb/ht5634

Installing windows 7 with bootcamp on mac pro yosemite 10.10: 'your disk could not be partitioned'

I have been trying to no avail to install windows 7 on my new macbook pro
with bootcamp in yosemite 10.10
i continually get the message 'your disk could not be partitioned', does anyone know how to tackle this? *I am including the screenshot
and when i try to partition my 250GB drive giving 80GB to the windows partition it just errors,
i have tried rebooting and verifying my disk and repairing and there's no progress or change.. any ideas would be greatly appreciated

Hi nicoczyz,
Welcome to the Support Communities! The steps you have taken to troubleshoot the issue of not being able to create a Windows partition are good ones. The resource below provides another possible scenario that may be the issue here. It's not the exact error message as your screen shot and the article references Windows 8, but the troubleshooting steps are still relevant:
Boot Camp: Partition alert message when using Boot Camp Assistant - Apple Support
http://support.apple.com/en-us/HT203913
This symptom may occur if you have partitions on your startup drive in addition to the following:
one OS X partition
one Boot Camp partition
one OS X Recovery partition (normally not visible in Disk Utility)
If Boot Camp Assistant detects a Microsoft Reserved (MSR) or Windows Recovery partition on your hard drive, you may see this message. The Boot Camp Assistant cannot continue until the extra partition is removed.
Microsoft Reserved and Windows Recovery partitions can be identified as unmounted partitions with the name "disk0s3" or "disk0s5" in Disk Utility. To remove these partitions, use OS X Disk Utility.
Important: Deleting the wrong partition can cause data loss. Be sure to back up both your OS X files and Windows files before attempting this procedure.
Open Disk Utility from the Utilities folder.
Click the Partition tab.
Look for an extra partition named “disk0s3" or “disk0s5”. Select this partition so it is highlighted.
Click the Remove Partition button ( - ).
Make sure the partition you selected is noted in the sheet that appears.
Click Remove.
When Disk Utility finishes, close the Disk Utility window to quit the app. The Boot Camp Assistant can now be used to reinstall or update your existing Windows partition.
Set up a Windows partition on your Mac - Apple Support
http://support.apple.com/en-us/HT204009
Before you can install Windows your Mac, you need to create and then format a Windows partition.
Setting up a Windows partition is one of the steps for installing Windows on your Mac. Use Boot Camp Assistant to create the partition, then use the Windows installer to format it.Create the Windows partition
To create the Windows partition, open Boot Camp Assistant and follow the onscreen instructions. Boot Camp Assistant is in the Utilities folder of your Applications folder.
Use only Boot Camp Assistant to create the partition. If you partition with another app and then use Boot Camp Assistant, the drive with the partition could be erased.
Boot Camp Assistant creates the partition only if the drive is formatted as Mac OS Extended (Journaled) and doesn't already have a partition created by Boot Camp Assistant. If Boot Camp Assistant sees other partitions, it may warn you that the startup disk cannot be partitioned.
If you need help determining the best size of the partition, refer to your Windows documentation. For Windows 8, the partition should be at least 30 GB.
If Boot Camp Assistant says that verification failed, repair the drive using Disk Utility. If that doesn't help, back up your drive and reinstall OS X.
The drive you're partitioning must be an internal drive. If you have more than one internal drive and the drive you're partitioning is not in the first drive bay, remove the drives in the lower-numbered bays, then reinstall them after installing Windows. A Fusion Drive is treated as one drive, and the Windows partition is created on the disk drive instead of the flash drive (SSD).
Format the Windows partition
Use the Windows installer to format the Windows partition that Boot Camp Assistant created. When you're asked where to install Windows, select the partition named "BOOTCAMP":
Then click Format to begin formatting the partition using the NTFS file system. If you're installing Windows 7 or Windows 8.0, you won't see the Format option until you click "Drive options (advanced)":
If the installer says that it couldn't create a new partition or locate an existing one, disconnect any Thunderbolt storage devices connected to your Mac. Reconnect them after installing Windows.
If you see “No Boot Disk Attached” when starting up your Mac, the Windows partition probably isn't formatted correctly. Remove the partition, then repeat the previous steps for creating and formatting the partition.
Modify the Windows partition
Remove the partition, change its size, or change its name.
Remove the partition
Use Boot Camp Assistant to safely remove Windows and the Windows partition from your Mac, restoring your startup drive to a single Mac partition. You may want to back up your information first, because removing the partition erases all of the data it contains.
Open Boot Camp Assistant.
Select “Remove Windows 7 or later version," then click Continue.
Do one of the following:
If your Mac has a single internal disk, click Restore.
If your Mac has multiple internal disks, select the Windows disk, select “Restore disk to a single OS X partition,” then click Continue.
Change the size of the partition
It's not possible to change the size of the partition after installing Windows, but you can remove the partition and create a new partition of the correct size. Don't try to resize your partition with Windows or a third-party app.Change the name of the partition
You can rename the Windows partition from within Windows. For instructions, refer to your Windows documentation.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Dec 22, 2014
I hope this information helps ....
- Judy

Installing Airport extreme card for 2008 Mac Pro

After some searching I finally found which airport extreme card to get for my 2008 Mac Pro that I just purchased recently . According to the the link below in the Apple archives it is part number MB363Z/A. However the link further down in the thread for the instructions on installing the card doesn't seem to work any more. Anyone know where to find another link for some detailed instructions or pics on installing the card. I haven't found any as of yet. I installed the old extreme card in my G5 pretty easily, but this seems a little more involved in the Mac pro from what I've read so far.
thanks, Craig
http://discussions.apple.com/thread.jspa?messageID=6563623

Ok never mind I found the old link seems to work now with detailed pics and instructions. Sounds like it's a bit of a pain but can be done with patience. Just have to get the card now.
http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/

To install windows 8 or 7 on mac pro (10.9.5)

Hi
I'd like to install windows 7 or 8 on my macbook pro(10.9.5).I tried reading how to do that but there's no success could anyone tell in detail how to do that?

Howdy rbannaii,
It sounds like you are wanting to install either Windows 7 or 8 on your Mac. Since I do not know specifically what resource you were using before, I would recommend the information in the following link to help you get Windows installed using Boot Camp:
Boot Camp Help: Install Windows on your Mac
Here are the initial system requirements and preparations that need to be made, and once everything is verified, click the link and follow the instructions in there:
Install Windows on your Mac
With Boot Camp, you can use Windows 7 or 8, or OS X on your Mac.
To use Boot Camp, you need the keyboard and mouse or trackpad that came with your Mac. (If they aren’t available, use a USB keyboard and mouse.)
To install Windows using an installation disc you need the following:
A built-in disc drive or a compatible external optical drive.For information about using your Mac with an external optical drive, see the documentation that came with your Mac.
An installation disc with the 64-bit version of Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8, Windows 8 Pro, Windows 8.1, or Windows 8.1 Pro.You must use a single full-install Windows installation disc. You cannot use an upgrade version of Windows.
An external USB drive formatted as MS-DOS (FAT).After you install Windows, you need to install support software that lets Windows work with your Mac hardware. You can download the support software to an external USB drive. To format an external USB drive as MS-DOS (FAT), use Disk Utility, located in the Other folder in Launchpad.
You may be able to install Windows using an external USB drive that contains a Windows ISO image (a disk image that contains the entire contents of a DVD) downloaded from Microsoft and Windows support software. To find out if you can install Windows using a USB drive, open Boot Camp Assistant, click Continue, then see if the option “Create a Windows 7 or later install disk” is available.
To install Windows using an external USB drive you need the following:
An ISO image of the 64-bit version of Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8, Windows 8 Pro, Windows 8.1, or Windows 8.1 Pro downloaded to your Mac.
An external USB drive that is 8 GB or larger.Boot Camp Assistant erases the external drive and copies the Windows ISO image and support software to it.
If you need help determining the best size for your Windows partition, refer to your Windows installer documentation. For Windows 8, create a partition that is at least 30 GB.
Thank you for using Apple Support Communities.
All the best,
Sterling

Installing windows 8.1 on new mac pro (late 2013)

Greetings,
First time poster so forgive me if I mess up protocol.
I'm trying to install Window 8.1 on my new late 2013 Mac Pro via bootcamp.
I have followed all the steps in bootcamp and the installation fails saying "cannot update boot configuration".
I tried using a few methods I saw people on here had success with creating their own partitions with disk utility, but I still have not had success.
My system is the 6 core version, 16gb RAM, 512gb flash storage, D500 graphics cards
Any help would be greatly appreciated.

I have the same problem with my brand new MacPro (6-Core, D700, 1tb SSD)
I have called Apple support to report this issue, in the mean time I've done the following tests:
Windows 7/8 tests NO Joy...
I have also tried tricking the windows 8 installer by doing the following.
1)Boot of Windows 8 installation (USB)
2)At the setup screen it will ask you to format your boot camp created drive to NTFS so that windows can be installed.
After the formatting is done and windows is ready to install i swap the Windows 8 USB stick for a Windows 7 USB stick then I click on next.
3)Windows starts copying the files just like it did on the Windows 8 installation and I get the same error.
"Can't update boot configuration"
I guess it has nothing to do with the Windows USB Stick since I've tried installing Win 7/8 and 8.1 with the exact same error.
I have not received any news from Apple support on this issue.
Any other ideas or suggestions ?
Thanks!

How to install windows 7 on early 2008 macbook pro?

I have an early 2008 or late 2007 probably macbook pro. I was running windows xp via bootcamp on it. i want to install windows 7 on it.
i read the apple statement about my macbook pro not being compatible with it.
is it because of the hardware or just the leopard software?
Can i upgrade my leopard to snow leopard and then be able to install windows 7 on it?
Just want to know if spending $ 30 on leopard upgrade is worth it since i will do it just to run windows 7.
Please help

just a little bump for help, please

Why can't I install iMovie 10 on my 2008 Mac Pro?

I am running Mavericks 10.9 and really like it. I tried to install iMovie 10 on my Mac Pro Quad-Core Intel Xeon 2.8 GHz and it says my video card is not compatible. Huh? I have a ATI Radeon HD 2600 XT with 256mb vram.
Thanks!
Rich

I don't think that card supports Open CL which iMovie 10 requires.
Matt

How do I install Windows 8 on a 2006 Mac Pro

When I insert the disk into the disk tray, it doesnt say that there is any disk in the tray. it worked fine on my newer Macbook Pro

Stick to one thread. Your question was answered in your other thread here https://discussions.apple.com/thread/5087532?tstart=0

Early 2008 Mac Pro + ATI Radeon HD 4870 = Not working

Just took delivery of my new HD 4870 video card today. I installed it in my Early 2008 Mac Pro and booted up. I got a picture no problem on one monitor, but nothing on the other. Furthermore, the display perfpane was missing a lot of controls, like Arrangement and Detect Displays and whatnot.
I did a bunch of rebooting and swapping of cables, and determined that both the mini-display port and the standard DVI connection will drive a monitor. However, if both are plugged in, the only active display is the one plugged into the mini-display port, and there's no option to setup the secondary display.
So I booted into bootcamp, and it automatically recognized both display ports, and mirrored my desktop on both monitors. I downloaded and installed the latest windows drivers, rebooted the machine into windows once more, and was able to configure a multiple monitor display with no problem.
This tells me it's not the card and it's not the motherboard.
Booting back into mac OS, I discovered that it doesn't even recognize that the card has video ram. It thought I had no video ram in the system.
So, this all leads me to the conclusion that Apple shipped me a card that it has not yet provided driver support for.
Hey Apple, can I have my 4870 display driver now?

Hi again,
It was funny to read all your answers on my iPhone while away from my computer. I could have reply on the iPhone but I preferred to wait to give you all the procedure I used to install the beta driver successfully this morning.
To start, I found this link:
http://www.insanelymac.com/forum/index.php?showtopic=155477
and followed the "4870 INSTRUCTIONS", starting like suggested by doing the "First, follow the 4850 INSTRUCTIONS above"... (See the link)
I would like also to specify that I did this without having installed the card physically yet. So I kept my HD 2600 in the computer, followed all the steps excepted for the step 3:
3. Reboot with -f -v (kextcache/verbose mode)
There is no -f nor -v switches available for the reboot command at the shell prompt. I simply rebooted as usual "Pomme -> Redémarrer".
After the reboot, all my software was still working as expected with my HD 2600 card, meaning that these steps are specific and active only for the HD 4870 when it's detected at boot-up.
You may have to Google for the string "Kext" in order to get the application to install the file ATY_Motmot.kext. For your information, ATY_Motmot filename is the same string as the one found under "System Information ->PCI cards" under "Name".
I get:
ATI Radeon HD 4870:
Name: ATY, Motmot
The article is not clear regarding where to find the OpenGL.framework to backup before installing the downloaded one. I found mine under:
/Developer/SDKs/MacOSX10.5.sdk/System/Library/Frameworks/OpenGL.framework
After having shutdown the computer, just after the reboot that proofed everything was ok, I removed the original HD 2600 card and put back the new HD 4870 and boot up...
Then I check the "System Information" and found both "Quartz Extreme" and "Core image" supported!
I launched Aperture, got it!
I launched Final Cut Express, got it!
I launched Starry Night Pro Plus, got it! Then I checked the OpenGL settings in Starry Night Pro PLus and activated both options:
Use shaders where available
Use AllSky shader (Not compatible with all hardware)
When I was doing these actions with my original HD 2600 card, the software was giving me a warning that my hardware did not support these options and that it could crash.
This time, with the HD 4870, it accepted my settings and give me back a very beautiful blue sky with much more shades!
So in conclusion, it works very smoothtly with my system and I am writing this with two monitors, having bought the MiniDP to DVI adapter this afternoon
I am happy!
P.S.: A girl from Apple support called me back this afternoon regarding my problem. She was very happy two when I told her that I did apply the beta driver and that it was working very well...
Good luck and best regards...

Best 2008 Mac Pro Graphics Card

Hey guys, running windows vista on my 2008 mac pro, just got a ati radeon 5870 but far cry 3 is painfully slow on highest settings. Does anyone know what the most powerful for games graphics card i can get that's compatible with mountain lion?
Many thanks
Andrew

Odd that you would use Vista instead of the later and better 7 or 8.
I assume you know how to setup Windows, but it sounds like you didn't go to ATI and install their graphic driver is all.
MacRumors has more on their forum. Yes 10.8.2 (not Windows issue, Windows you can use any PC card you want) the GTX 570 or 670 as long as you use cards with only a pair of 6-pin power connectors.

Windows Vista doesn't recognize Mac Pro RAM

I have installed Windows Vista Business on my Mac Pro using Boot Camp, and have found some anomalies that seem strange. It is basically working well (for Windows....).
1. I installed this on a 500Gb HD on my Mac Pro. This machine is a fully configured box doing video editing, with extensive AV files. It has all four drive bays filled, 3 of them with 1Tb drives, the thrid with a single 500Gb drive. I was a bit surprised to find that Boot Camp won't allow partitioning of its OSX installed boot HD beyond a Mac Partition and the Boot Camp paritition, or a secondary entire HD dedicated to Windows. This is not very practical with these large drives, since even though HD storage is fairly cheap, I don't want to give Microsoft more than maybe 100gb on a drive. All of the other HDs are partitioned for multiple parititions, which I need to preserve. The OSX boot drive has 3 OSX partitions already installed. Any ideas on how to do this better? Yes, I know I can use Parallels or VMWare, and do, but find that native Boot Camp Windows is better.
2. Windows Vista is running on a dedicated HD in Boot Camp on this machine (to all appearances running fine), but doesn't recognize more than 2Gb of RAM on my machine which is configured with 10Gb of RAM which is recognized appropriately in OSX. What am I missing?
I would appreciate any help on a partitioning scheme that works to support multiple partitions on these large drives, and a reason that only 2Gb out of 10Gb of RAM is recognized by Windows Vista Business in Boot Camp.
Thanks!!!

Thanks for your response.
I am running in Boot Camp, which runs in native mode without emulation. The advantage is that if you are going to run Windows, which is my goal, it doesn't have the overhead of OSX. Indeed, most Mac machines are among the fastest Windows machines available for equivalent hardware when running Windows in native mode. There are a few more arcane advantages to running natively, particularly in terms of connecting to external devices. There is no background RAM overhead when run natively.
Thanks....

With Boot Camp, should I install the 64 bit version of Windows 7 (Home Premium edition) OR the 32 bit version when installing onto an early 2008 Mac Pro operating OSX Lion with a 1 TByte internal HDD?

With an early 2008 Mac Pro I'm about to add a second internal drive (1 TByte SATA) and initially install OSX Lion onto the new drive. Then to partition this new HDD via Boot camp. But my question is whether I am best advised to purchase the 64 bit version of Windows 7 (Home Premium) or the 32 bit version of Windows 7 (Home Premium) for the Windows sector of the disk What are the differences, and will I notice a difference in performance?

In chart from wiki, (scroll down to "Comparison chart") check the maximum CPUs supported.
You don't see this on MSoft's 1st searched for chart hit. This is one reason you will regret not paying for Professional+ if you get Home Premium 64 as I did for Mac Pro early 2008.
Home Prem Task Mgr sees 4 processors vs. the 8 that are seen by Pro+.
Costs more than a Mac upgrade to Lion if you make that mistake.
http://en.wikipedia.org/wiki/Windows_7_editions

Installing Windows 8.1 on 2008 Mac Pro

Similar Messages

Maybe you are looking for