Installing Windows 8.1 on a Mid-2010 13-inch MB Pro, with an iso file.

Hi Everyone,
My first post, so bare with me.
I'm hoping to get some help here, after almost trying everthing on the menu.
What im looking for is an explanation on how i can get Windows 8.1 installed on my MB Pro, with the use on iso file. I have downloaded, the necesarry BootCamp Drivers etc. When i launch the Bootcampassistant the only options I am able to choose from are: 1: Download the latest Windows support software from Apple and 2: Install Windows 7.
If any of have the solution to my problem, please do comment.
Thanks,
HB

Read the Boot Camp guides, especially the Boot Camp system requirements located here: http://support.apple.com/kb/HT5634.
The system requirements for your computer indicate that your computer does not suppot Windows 8.1.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD

Similar Messages

This Question is at least 2.5 years old. But still an issue. I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7. Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7. Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

iTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

I have a Mid 2009 15 inch MacBook Pro with 2.53 GHz Intel Core 2 Duo and 4 GB 1067 MHz DDR3. Can this MacBook be upgraded to 8GB? If so, what type would you recomended

I have a Mid 2009 15 inch MacBook Pro with 2.53 GHz Intel Core 2 Duo and 4 GB 1067 MHz DDR3. Can this MacBook be upgraded to 8GB? If so, what type would you recomended

Awesome! Thank you What about the Corsair brand?
http://www.amazon.com/Corsair-DDR3-Laptop-Memory-CMSO8GX3M2A1333C9/dp/B002YUF8ZG /ref=cm_cr_pr_product_top

Can I use this hard drive for my Mid 2010 13 Inch Macbook Pro?

http://www.crucial.com/store/modelpart.aspx?model=MacBook%20Pro%20(13-inch,%20Mi d%202010)&imodule=ST1000LM024#pr-header-back-to-top-link
My macbook model is 7.1
I thought this would work but i just read one of the reviews and it says :
"CP specs state this is compatible with my mid 2010 Macbookpro 7.1, but it is not. I found this out after taking the computer and drive to the Apple store. OK, it's not so much CP specs that are wrong as the Apple folk took some time before coming up with the problem. Not all, but SOME of the 2010 systems with 2.4Ghz were never intended to use a 1Tb drive, and that means the OS will not mount properly."
Now im not sure if its just his problem, or all Mid 2010 MBPs that have this issue.

I have to question the premise of the review that you are citing. Any 2.5" SATA HDD should work in your MBP. Capacity is not an issue. You might call the technical staff at OWC and pose this query to them. I am confident that they will respond the same way I have.
Ciao.

Installing Windows 7 Ultimate Edition on a Late 2013 15" MacBook Pro with Retina Display. (Top Spec)

All,
I am trying to install Windows 7 Ultimate Edition on my Late 2013 MacBook Pro with Retina Display. I am using the .iso file/USB stick method of installation because I don't have access to my original Windows 7 DVD. I have the top specification model with all of the max upgrades. The problem I am having is when I get to actual installation of the Windows 7 software, it can't find the drivers I need to complete the installation. Any tips or suggestions?

I thought about doing what you said above, but unfortunately, I didn't have any spare blank DVD's. However, I was able to sucessfully install Windows & on my Mac. What I did was when I got to the error message, I would cancel the installation and that would return me back to the install now window. At that point, I would take out the flash drive and put it into another USB port. It took a few times, but eventually it recognized the drivers and allowed me to install the software. Remember, once you get past that point, the installation will ask you to choose a drive to install Windows on. Highlight the Boot Camp drive and chose "advanced", and then chose "format" after that. After all of this, it should be smooth sailing.

Can I install Windows 8.1 on my mid-2010 MacBook Pro?

Can I do it or I will get an error saying that it is incompatible and cannot be installed?
I need to know before I buy. As far as I am concerned I does meet the minimum system requirements suggested by Microsoft by a long shot. Will boot camp allow it?
Regards.

try this:
http://store.apple.com/us/browse/guide/windows#topic-1

Late 2010 17-inch MacBook Pro beach ball freeze

Hi all, this is my second to last resort (last is sending in for repair xD). Well anyways, hope that you guys can help me solve this problem so I won't have to go there .
Here's the story:
I recently purchased a custom, late 2010 17-inch MacBook Pro with these apple upgrades:
-2.8ghz intel i7
-anti-glare screen
After doing some research, I found out that the memory and harddrive upgrades from aren't any special. So, I decided to do these upgrades myself since it is cheaper. These are the components that I have installed:
-Corsair CM3X8GSDKIT1066 G (2x4gb 1066 ddr3 memory)- http://www.newegg.com/Product/Product.aspx?Item=N82E16820233081
-Corsair P128 CMFSSD-128GBG2D (128gb ssd)- http://www.newegg.com/Product/Product.aspx?Item=N82E16820233087
I purchased both of these items from newegg. The solid state drive came off of my old laptop, which I installed into about 6 month ago.
So, once my MacBook arrived, I didn't even turn it on. i went straight into unscrewing the back and installing the components. The process went smoothly and I booted up the machine afterwards. Everything looked fine at first, but the installation failed about midway through (due to failure to copy necessary files). But I tried and tried again and after about the 25th time (yes I know, it took the whole day), it finally worked. The reason for my persistency is because everytime it would fail, it would fail at different spots of the installation, so I figured that eventually I will get lucky. So I unchecked as many items as possible under the "what to install" list and it finally went through after many tries.
Now, with OSX running, the laptop would constantly freeze with the beach ball of doom.
Here is my thought process of what could be wrong (from most likely to least likely)
-installed ram is defect
-apple osx cd is defect
-compatibility issues with solid state drive (the drive must be fine since it worked in my old laptop for 6 months)
Once I installed OSX, I quickly went through the process of elimination to solve my problem:
-ran 15 hours of memtestosx with zero errors -> ram is fine
-since osx is running without a cd now, not the cd
-very unlikly that there are compatibility issues with harddrive
I did a TON of googling and found that many people have the same problem as me, but mostly on much older models (in which apple fixed through software/firmware updates) and also flash problems. I tried to installed these updates but OSX said that my system does not require them. So, I installed a beta version of flash and everything was much better, the computer started up 3 times faster and it did not freeze for a while. Hoever, after a couple hours of on-off use, it froze again . Knowing that it must be flash-related now, I uninstalled flash all-together. However, the problem still remains.
Here is a more detailed description of when this freezing occurs:
-mostly during safari operations such as loading a webpage or closing the browser
-it froze a couple of times while opening things such as the applications folder from the bottom dock or opening the "about this mac" window.
-before the flash beta update, it would freeze in the middle of a flash video playback from internet (like youtube). But after update, this freezing stopped occuring (did an hour of testing) and I actually got to the point where if I am loading a page in safari and it "looks" like it is freezing, I could close safari before my system goes into complete melt-down (once beachball starts spinning, all hope is gone)
Now, I am thinking that it might still be the OSX cd. Even though the installation was successful, it might have copied corrupt files that are freezing the laptop. I have order a replacement cd from apple and it should arrive within a couple of days. However, I still have big doubts on this being the actual solution.
I know that since this is a very recent model, it is hard for many people to have come across such problems yet (especially with my specific specifications). However, if anyone has an idea, or a past solution that is fits the description, any help is greatly appreciated.
Thanks for reading

Hi Dale,
Thanks for the replies. No, when I powered up the Mac, I put the OSX cd in first thing and press and held "c" until it started booting off the cd. Then I proceeded on reformatting the drive and etc.
I read all of that forum post. I reseted the PRAM, still freezes.
The new OSX cd came today, same thing happened, although it only took me 2 tries to install OSX. However, it would still freeze afterwards.
I very much realize that it could be a ram problem and how Corsair doesn't work so well with apple. However, Corsair has yet to let me down, that's why I chose it over crucial when I purchasing the ram. I did a lot of research and it seemed that as long as the ram meets spec, Macs will take it. And after 15 hours of memtestosx testing, I highly doubt that it is the ram.
However, I think I might have found the solution. I finally got the time to free up one of my external hard drives and installed OSX onto it to test the hard drive. I checked everything for the optional installs (except rosetta and the old quicktime) to further confirm my theory. After a very long install, it completed successfully! the odds of that happening on the first try using the old system is quite low (due to my countless install attempts with the old system and it failing with only half of the load of my new install).
And since then (probably around 3 hours of usage), my MacBook has not encountered a beach ball of death yet (well, sort of. it did it once when I was restarting, but I think that was due to the old drive because it is still plugged in and it was probably trying to read it while it was frozen in the closing phase of a shutdown). Anyhow, I think a few hours of usage will definitely confirm my theory and hopefully a ssd firmware update will solve my problem so I won't have to invest on a new ssd xD.
Ill update once I have made any progress

How to install Windows 8 or 7 on Mid 09 Macbook Pro (10.9 Mavericks)?

hello fellows
     i have a macbookpro mid 2009 , i had installed windows 7 on 10.8 and using well .
    Two days earlier, i upgraded the ssd and installed the 10.9 on my laptop. but i cross into trouble when install the windows.
     i have follow the instructions that windows 8 installation on 10.9 by using a usb, and i have a bootcamp partition. but the screen stay white after system reboot.
     did anyone have installed windows 7 or 8 on mid 09 with 10.9 Mavericks successful ?

Welcome to Apple Support Communities
Your MacBook Pro is not designed to install Windows through an USB drive, so do not use this option. You are getting a white screen because your MacBook cannot start up from the USB drive with Windows.
Instead, use a DVD with Windows, so you will be able to install Windows. Follow these steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Mid 2009 MacBooks Pro do not support Windows 8 officially

I just planned to install windows 7 on my MBP Mid-2012 using VMware Fusion,so i am bit panic about viruses and malware's affecting through vmware,is there any way to avoid from this??

i just planned to install windows 7 on my MBP Mid-2012 using VMware Fusion,so i am bit panic about viruses and malware's affecting through vmware,is there any way to avoid from this??

usamasheikh wrote:
virus protection in vmware or on my running OS X 10.8.2??plz help me out
First, you can install Microsoft's Security Essentials in the Win 7 VM and keep it up-to-date. Second, you can turn off Sharing in Fusion's System Settings to keep the VM environment separate from your Mac. Third, you can look into Sophos Anti-Virus http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition/download.aspx for the Mac host.

Solution to install Windows 7 on Macbook Air MID-2013 after 3 weeks of test, make with ISO image a usb key 2.0, It works!

Solution to install Windows 7 on Macbook Air MID-2013 after 3 weeks of test, make with ISO image a usb key 2.0, It works!

1. Select Partition4: Bootcamp. You should see advanced Options.
2. Click Format and convert the partition to NTFS.
3. Click Next.
Reference - http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
See Page 6.

Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help Apple support team!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B...)

Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)

Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)

Type of battery -- mid 2010 13-inch macbook; and how soon do I need to replace dead battery?

I'm trying to replace the battery on my mid 2010 13-inch Macbook. I'm not sure what kind of battery I need to get, and can't seem to find any indication in "System Information". It's a "MacBook7,1" with Intel Core 2 Duo and Processor Speed: 2.4 GHz. I found this battery on amazon: "Apple MacBook Pro 13 Inch Mid 2010 Battery 60Wh, 5500mAh". Will it work? Do I need to get one with a particular power capacity, or anything like that?
I'm also wondering how quickly I need to get the problem fixed. My computer stopped working yesterday unless plugged into a power source. I don't really want to send it away to get it fixed, as I have a lot of work I need to do on it over the course of the next week. If I buy a battery online, wait for it to arrive, and install it (a process that will probably take at least 4-5 days), will I be leaving it too long? Or is it OK to continue just running my computer off the mains for now?
Thanks!

PS: here's some other info I found, after my earlier post timed-out:
See how a determined DIY user with some skills & abilities could dissect & replace battery:
https://www.ifixit.com/Guide/MacBook+Unibody+Model+A1342+Battery+Replacement/166 7
Example of what new replacement battery looks like, for your Mac; w/ part number:
http://www.battery-center.net/apple-macbook-unibody-13-battery.html
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
An Apple Store or Authorized Apple service provider could replace the battery
for the cost of the part, and a fee for the tech time. This may vary by location.
Hopefully this helps. The part is not considered 'user replaceable' but it is possible.
Good luck & happy computing!

I want to upgrade my mid 2010 17" i7 MacBook Pro from 4 to 8 meg. However, no memory is available. What should I do?

I want to upgrade my mid 2010 17" i7 MacBook Pro from 4 to 8 meg. However, no memory is available. What should I do?

Welcome to Apple Support Communities
The Mid 2010 MacBook Pro supports 8 GB of RAM. You can buy RAM at OWC or Crucial > http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3
As your MacBook Pro has got two slots of memory, you will have to replace your actual memory and install two slots of 4 GB. Follow these steps > http://support.apple.com/kb/HT1270#link6

Can I install Windows 7 (64 bit) on late 2013 edition of MacBook Pro?

Can I install Windows 7 (64 bit) on late 2013 edition of MacBook Pro using Bootcamp? Before today, I would have never even asked this question due to the large number of users who continue to use Windows 7 in the PC world! However, there seems to be two conflicting links on the Apple site.
http://support.apple.com/kb/ht3986
http://support.apple.com/kb/HT5634
From the first link, there is a statement as follows: Mac Pro (Late 2013) only supports Windows 8 (64-bit).
From the second link, the table (under MacBook Pro) clearly states that the Retina, 13 inch, late 2013 edition supports BOTH Windows 8 64 bit and Windows 7 64 bit.
So the above information is conflicting; and as a result, I am confused! Thanks for any responses.

As far as I am aware your computer supports Win 7 and Win 8 - 64-bit.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows 7
         or Windows 8. For Boot Camp 4.0 and above you can only use
         Windows 7 or later. Follow instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Can I install windows 7 on a second internal drive on a macbook pro 2011?

Can I install windows 7 on a second internal drive on a macbook pro 2011? I have 2 500 gb. SSD drives in my 2011 MacBook Pro. My plan was to install windows 7 on the 2nd drive. I'm new at owning Macs so I have had Windows on main drive using bootcamp but I wanted to speed up my 17" Mac so I maxed out the memory and added the SSD drives. Thinking I could put the 2 operating systems on seperate drives I bought to 2 SSD's. Is there any way to do this. So far I have drawn a blank. Any ideas?

Yes. Just install Windows onto it without using the Boot Camp Assistant to partition it.
(124769)

Installing Windows 8.1 on a Mid-2010 13-inch MB Pro, with an iso file.

Similar Messages

Maybe you are looking for