Installing Windows 8 Along With Mac OSX and Win7

Ok I want to install winows 8 on my macbook pro alongside mac os x and windows 7 but I already have the maximum primary partitions.
Can I delete the 620MB Primary Partition?

It does not matter for the Operating System ..... you can install the wireless router ....
Open Safari browser .... type 192.168.1.1 ....leave username blank & in password use admin ...
Click on the Wireless tab on the Setup page- Here Wireless Network mode
should be mixed- Provide any non linksys network name ....
Name (SSID) box- Set wireless channel to 11- And wireless SSID
broadcast should be Enabled and then click on "Save Settings" >>Now
Click on the Sub tab under wireless > "Wireless Security" Change the
Wireless security mode to "WEP/WPA"...have a note of the key ... click save settings ...

Similar Messages

  • Installed windows 7 with Boot camp and now cannot get back to OS x x

    Have installed Windows 7 with Boot Camp on a 20" 2006 iMac running X 6.8. Now cannot get back to original OS. Tried Snow Leopard in drive and holding c and various other keys  at start up but still Windows. Any ideas?

    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the disk icon for OS X.
      5. Click on the arrow button below the icon.

  • Partitioning and Installing Windows 7 with Mac OS X Lion

    Hi
    after failing seriously with the partitioning after installing Win 7, I hope that I will find some help from the scratch...
    I want to install OS X Lion with Win 7.
    3 Partitions with Mac are needed and 1 fro Windows.
    I got 750Gb on my Mac Book Pro.
    Disk should look like this:
    100Gb Main Partition (Mac)
    200Gb Documents Partition (Mac)
    300Gb Stuff and Games (Mac)
    150Gb Windows 7 Partition
    I tried now to create a 100Gb Partition for Mac and a 150Gb Partition for Windows 7.
    After Installing the Mac OS, I was trying to add the 2 other Partitions, but it already telling me that i'm gonna loose my Windows Boot when I change the Partitions. I pressed ok and restarted with the windows 7 DVD for the recovery, which wasn't working due to version incompability -.- (I installed Windows from that DVD)
    What steps should I make to get this to work? Some guys says that it not gonna work, but a friend of min has 3 mac partitions and a windows. Sadly he can't remember the way to this setup
    Thank you for the help
    NESTi

    What you are talking about is illegal.
    Here are the relevant words from the Snow Leopard EULA
    A. Single Use License. Subject to the terms and conditions of this License, unless you have purchased a Family Pack or Upgrade license for the Apple Software, you are granted a limited non-exclusive license to install, use and run one (1) copy of the Apple Software on a single Apple-branded computer at a time. You agree not to install, use or run the Apple Software on any non-Apple-branded computer, or to enable others to do so. This License does not allow the Apple Software to exist on more than one computer at a time, and you may not make the Apple Software available over a network where it could be used by multiple computers at the same time.
    You should also read the terms and conditions of use of these forums, which include the following:-
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    Do not post defamatory material.

  • Installing Windows 7 on Mac OSX Snow Leopard 10.6.4

    Before i install Windows 7 on my mac, i read a lot of posts involving driver problems with the keyboard and windows not working on the windows partition. So i was wondering what should i do to avoid this problem

    applefanboy1996 wrote:
    Before i install Windows 7 on my mac, i read a lot of posts involving driver problems with the keyboard and windows not working on the windows partition. So i was wondering what should i do to avoid this problem
    You should head over to the Boot Camp forum, http://discussions.apple.com/category.jspa?categoryID=237 if you are going to install Windows using Boot Camp Assistant. The way to avoid problems is to read the Boot Camp installation guide and follow the instructions. I think most of the problems are due to not following instructions.
    If your plan is to install Windows using Parallels, Fusion, or Virtual Box, then head over to their respective forums and once again read the instructions.
    Windows installs fine on a Mac and most people do not experience problems.
    Message was edited by: BobTheFisherman

  • Trouble installing Flash 10 with Mac OSX 10.5.8

    I have a Powerbook running Mac OSX 10.5.8 and had Flash 8. I was unable to play a video and was directed to the website to update my player.  Flash 10 downloaded without difficulty but when I tried to install it, I got an error message:
    "The following install step failed: run preflight script for Adobe flash Player. Contact the software manufacturer for assistance."
    Where can I get this help or what can I do?
    Thanks, MJ

    Hello,
    Flash Player 10.3.183.90 is the last version to support OS X 10.5.8.  Go to http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html and download the 10.3.183.90 archive file.  Extract the content and use the file flashplayer_10_3r183_90_mac_intel.dmg to install Flash Player on OS X 10.5.8.
    Maria

  • Installing WRT54G with Mac OSX and getting a password

    Ok, I just hooked up my wireless router to the internet modem (it's a motorola surfboard) and I believe my mac automatically picked it, now I'm am trying to add a password. How do I make sure my mac can pick it up and how can a program a password ? Thanks ! PS: I'm not very computer savy, so if it is at all possible to break it down into like installing a router for dummies that would be grat. Thanks !

    It does not matter for the Operating System ..... you can install the wireless router ....
    Open Safari browser .... type 192.168.1.1 ....leave username blank & in password use admin ...
    Click on the Wireless tab on the Setup page- Here Wireless Network mode
    should be mixed- Provide any non linksys network name ....
    Name (SSID) box- Set wireless channel to 11- And wireless SSID
    broadcast should be Enabled and then click on "Save Settings" >>Now
    Click on the Sub tab under wireless > "Wireless Security" Change the
    Wireless security mode to "WEP/WPA"...have a note of the key ... click save settings ...

  • Black bars in Windows 7 with mac mini and AMD 6630M HD

    I bought a new i5 Mac mini.
    I installed win 7 home premium 32 bit on it without a problem using boot camp from Lion. However windows does not totally fill the screen. There are black bars on all side of the display. About an inch thick.
    I have the mini connected via HDMI to my sharp Aquos tv @ 1080p.
    What can I do to fox this? My previous mini did not do this with nearly the same setup. There is now where to downlaod drivers for the AMD 6630M HD card in this mini.

    Hi PaulJO
    I have the same problem when I tried downloading and installing the catalyst suite software from AMD web site, it told me that my graphic card was not compatible. Which I know is!!
    Any help on getting the driver?!?!

  • HP 7520 "Scan to Computer" not working with mac osx and wireless

    Just installed from the disc, and then upgraded with latest version from HP site.  Error message on 7520 printer is "No computer found".  I am definitely connected to the same wifi network. Scan works okay if started from the iMac, bit not the other way around.

    Hi MsChanChan,
    You can remove the printer by clicking the "-" symbol in the printer list. After removing the printer, perform a restart and reinstall the software that you originally used to install the printer.
    Don't forget to mark a post as solved if it fixed your issue

  • Can i install windows 10 with 2gb ram and duo core proccessor

    Do my end users Need internet connection to access my spiceworks helpdesk userportal ?

    WSUS is filling up all my hard disk partition which is 200gbAlready tried running server cleanup wizard, unticking some products and classifications but still after removing files from wsus folder and restarting it it is filling up all hard disk partitionBelow are the settings I currently have :In products anad classifications I have selected:- Exchange Server 2013- office 2007- office 2013- widnows 7- windows 8.1 Dynamic update- windows 8.1- windows server 2003- windows server 2008 r2- Windows server manager - windows server update

  • Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

    Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
    My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
    Please help!!!
    Thanks,
    Paolo

    Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
    Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
    Personally I think of all the issues possible its DVDSP vs QT.
    Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

  • I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

    I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

    Hi Shane,
    Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
    I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
    Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
    Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
    Best Rgds.

  • HT4818 hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx

    hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
    Sebastian

    hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
    Sebastian

  • HT4759 My mac mini is not updating its software to OSX Lion v10.7.5.  I would like to use iCloud on my desktop along with my iphone and ipad but the auto updates are only upto 10.6.8.

    My mac mini is not updating its software to OSX Lion v10.7.5, which I need for iCloud.  I would like to use iCloud on my desktop along with my iphone and ipad but the auto updates are only upto 10.6.8. 

    You need to get the newer version from the Mac App Store.
    (70404)

  • Cloning my mac mini HD with osx and win7 partitions?

    My mac mini HD has osx and win7 installed. I want to move to an SSD. Is there a way to clone the HD to SSD so both the osx and win7 partitions get "cloned" and I don't have to reinstall anything?

    An earlier post I made on this subject brought out the answer of using Winclone.
    I'll check into this.
    Not sure how to delete this post....

  • I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

    I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
    I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
    I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
    After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
    “Welcome to Aperture 3.2
    Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
    Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
    Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
    Current Library Location:
    Jadzia (home)   -----Pictures------Aperture Library
                                                      QUIT             UPGRADE”
    I have heard horror stories  about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
    So here is my dilemma.  I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
    Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

    Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop.  Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
    You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file.  For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto. 
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    OT

Maybe you are looking for