Installing windows on dedicated hard drive on Mac pro

Hi
I would like to install windows vista ultimate on its own hard drive on a mac pro- but I haven't been able to do it. I tried using boot camp but when it comes time to install windows on a specific partition I receive an error message that it won't install because the drive is not formatted to NTFS. On the other hand there seems to be no way to format to NTFS either through the Mac os or the windows installation dvd prior to this step- catch 22!!
Any help is welcome.

Hi danton,
that's odd since Vista is supporting the GPT partition type.
If I remeber correctly from another post from you, you have a full Retail version of Vista which includes the 32-bit and the 64-bit version, right ?
Are you trying to install the 64-bit version when this error occurs ?
If so, power down your Mac Pro and pull out all drive bays/harddisks leaving only the one harddisk in on which you wanna install Vista.
Then boot your MP of the Vista DVD and try to install.
(That's an old trick courtesy of 'the hatter').
MAybe it helps.
Stefan

Similar Messages

Installing Windows XP NTSF hard drive in Mac Pro

I'd like to migrate from PC to Mac by simply installing the NTSF C: drive from my Windows XP PC into one of the drive bays in a Mac Pro, installing Boot Camp and then using the option key to boot into either OSX or XP. Is it that simple? I gather I would have to install Boot Camp drivers on my C: drive, and probably install drivers for the graphics card. There would be 2 drives in the Mac Pro, an OSX drive and an XP drive. I'm really not a fan of drive partitions. Or is it better to do a clean install of XP on the second internal drive?

No. The Window system file must be on the system disk in order to boot.
You need to read http://manuals.info.apple.com/MANUALS/1000/MA1583/en_US/boot_camp_install-setup_ 10.7.pdf
Allan

Installing SATA (parallel?) hard drive in mac pro

is there a way to install my old ATA (is this called parallel) hard drive into my mac pro? i know i can't put it in one of the SATA slots, but how about the second drive bay or something?

While the screws fit into hard drive screw threads they're largely useless as the mounting holes for a 5.25" optical drive do not match that of a 3.5" hard drive. If you want to do any screwing in on the drive you will at a minimum require a 3.5" to 5.25" conversion bracket. Even then the mounting can be tricky do to the short cable and likely misalignment and the connector to that of the optical drive above it.
While the installation of a drive is not difficult the mounting of it, especially if you want it nicely done, can very well be.

Installing Windows to external hard drive or using parallels?

Will installing Windows on external hard drive protect mac from viruses better than parallels? Which option is more sound, installing windows on external hard drive or using parallels? My main concern is mac protection. Thanks

Hi,
Thank's for your reply.
Using Parallels and creating a virtual machine, I think it should be possible installing Windows to an external hard drive, shouldn't it?
Message was edited by: Oleguer Vilella

Installing Windows 7 With Boot Camp on Mac Pro 3.1 w/GTX285 Video card

I have an Early 2008 Mac Pro 3.1 running the latest version of OS 10.6 with all updates. I have an nVidia GTX285 card installed in the Mac Pro that has been working fine for at least six months under OS 10.6 with Mac drivers downloaded from the nVidia web site and installed under OS 10.6. I replaced the ATi 2600XT video card with the nVidia GTX285 in order to have CUDA support in Premier Pro CS 5 and it works beautifully.
I now wish to install Windows 7 Professional 64 bit on this Mac Pro. I have never had any version of Windows installed on this Mac Pro. I am using Boot Camp assistant and a new full version of Windows 7 Professional 64-bit.
My question is do I need to remove the GTX 285 graphics card and replace it with my AT 2600XT before installing Windows 7? This would be a real pain to do because the two connectors to the motherboard are hard to get to. However, since Apple never used the GTX285 in any of its computers, I am worried that I will not have any video display when I go to try and install Windows 7 with Boot Cam assistant.
Please advise me whether removing the graphics card is necessary before installing Windows 7 with Boot Camp.
Thank you in advance for responding.
Tom

NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
How I would proceed -
Install Windows on its own drive.
Pull all the other drives.
Boot from Windows 7 Pro DVD
Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
The Mac Pro is as close as anything to a standard Wintel workstation.
Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
AV-Test.org Test Security-Software

How do i install windows 8 on a late 2012 mac pro?, how do i install windows 8 on a late 2012 mac pro?

how do i install windows 8 on a late 2012 mac pro?

Follow the directions here http://www.apple.com/support/bootcamp/

How to view windows Xp formatted hard drive with Macbook pro without losing data

How to view Windows Xp programed Hard drive with Macbook pro with out losing data on hardrive

Go to the First Aid tab in Disk Utility, select the external drive partition and read the format from the lower left, at the bottom.

How to install hard drive into mac pro

how to install hard drive into mac pro

I recently bought a new 2TB internal sata drive for my Macpro.
The installation was easy, but I'm not sure what to do next.
For one, should I partition the drive?
My purpose for buying the drive was to use it as my go to drive for Parallels. I used to run my music studio on Windows based machines, and my older project files require a windows OS to recover. I installed Parallels so I can have my studio running Mac and Windows programs which will enable me to access my old project files and take them into my newer Protools system.
So now, I've installed my new hard drive, but I'm not sure if I should partition it....And!? I'm not sure how to designate that drive for my virtual pc on Parallels. I was able to allocate enough disk space to parallels in order to load my music software, but at this point, I'm not sure if I've just promised it disk space from my original partitioned drive (which only has about 350 GB left on it).
I would love to be able to make one internal drive available for Parallels, and the other available for the rest of my OSX. When I use Parallels, I still would like to save some extra information on the 2TB drive as well from my dekstop running OSX.
I hope this makes sense! Your help is much appreciated!

Can I install windows on another hard drive?

So, I just purchased a 1TB hard drive and was wondering if I could install windows on to the new hard drive and leave my mac hard drive (128GB) just OS X. Is there any way to do this through Boot Camp?

Installing Windows on an external drive is not supported.
Neither of MacBook Air (13-inch, Mid 2013) - Technical Specifications or MacBook Air (11-inch, Mid 2013) - Technical Specifications have a built-in Optical drive, so you will need to use a USB2 disk, Bootcamp Assistant and a Windows ISO to create a USB installer and install it on the internal disk.
Please start at How to install Windows using Boot Camp - Apple Support.

Installing new hard drive in Mac Pro - question about compatibility.

I'm looking to install an extra internal hard drive in my 2009 Mac Pro, but I need to know if there are any compatibility issues with newer hard drives. I am looking at the Western Digital WD1002FAEX Caviar Black:
http://www.amazon.co.uk/gp/product/B0036Q7MV0/ref=s9_simh_gw_p147_d0_g147_i1?pf_ rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-2&pf_rd_r=1HY9SF4S3JFEA79TK610&pf_rd_t=101&pf _rd_p=467128533&pf_rd_i=468294
Would anyone be able to tell me if this is likely to be compatible with my 2009 8 core Mac Pro? Or if there is anything I should be looking out for in particular? I know pre-installed hard drives are 3GB/s and the above hard drive is 6GB/s, does this matter?

Any SATA drive
About urls:
http://www.amazon.co.uk/gp/product/B0036Q7MV0/
is all that is needed.
For a bit more, WD1502FAEX WD Black 1.5TB
http://www.wdc.com/en/products/internal/enterprise/

Cant install windows with 2 hard drives attached

i have an sata drive that i use for boot drive and ata for back up. i can not install windows on the sata drive if the ata drive is hooked up. windows only sees the ata drive. it will not give me a choice to install on the sata. if i unhook the ata i can install just fine on the sata. does anyone have any ideas why?
it's like when i have windows installed on the sata drive, then the windows xp pro cd does see it and lets me install on that drive only, it won't let me choose sata or ata. but if there is no OS installed on anything it only goes to the ata drive. i only want to install windows on the sata drive and do not want to keep unhooking my ata drive constantly when i reinstall windows on the sata.
can someone please help?

Danny you don't have to stay out, I just already said stuff and you told me to do something i already said i did.
Here is my current settings to get it to show my ata drive in windows and i boot from the sata cus windows is on it. currently when i install windows if no OS is on either drive it will auto install on the ata and i don't want that. i want to have a choice what drive and where to install on which means i would always install on the sata drive. but it just installs on the ata not giving me a choice. if windows is installed on the sata already then it will offer me that drive only and not allow me to select the ata. when i do a complete reformat reinstall i must unhook the ata drive and then it will work on the sata drive.
on chip ata mode - legacy
ata config- sata only
sata keep enabled - yes - greyed out. i had to mess with other native or something mode and change it to yes in order to get it like this and work for me. why?
pata keep enabled - yes- adjustable
pata channel selection - both
combined mode option - pata 1st channel - greyed out
sata ports definition - p0-1st./p1-2nd. adjustable
config sata as raid - no, greyed out.
is this a weird set up? and exactly how do i get it so i never have to unhook my ata drive again?
each drive they are all on their own channels. ata by itself, dvdrw by itself and sata by itself. all master.

Help Installing Windows 7 64 Bit on Early Mac Pro

As previously noted, Wind 7 RC 64 bit DVD will not boot on early Mac Pro. I installed Win 7 64 bit on a dedicated hard drive as follows: 1) I booted into Vista 64bit successfully 2) I installed Win 7 64 bit on a second black disk, as noted above 3)All files installed correctly I think since Win 7 will begin to boot showing the Windows 7 startup screen 4) However, the startup screen will then disappear and the screen goes black, indicating a failed boot. When I engage the option screen (with primary Mac drive installed) during boot, no Windows disk is shown, indicating that boot camp does not recognize the Win 7 disk as a valid startup drive.
Has anyone successfully installed Win 7 64 bit on an early Mac Pro?? I would appreciate any help in accomplishing this. Also, is there any reason Apple has not provided an EFI firmware update for first generation MacPros?

Burn a DVD with Windows 7 RC 32-bit which you can boot from.
Try Safe Boot also.
From Vista you can install 7 on another hard drive. You can also copy the DVD to 6GB partition and run the install setup off that while in Vista.
Mixing ATI and Nvidia probably still doesn't work (may when 7 ships).
Windows is more aware of disk I/O errors than Mac OS.
Keep your system basic, don't have anything connected or installed you don't need (like PCIe controllers).
Vista SP1 or later, 64-bit also looks for EFI64/UEFI 2.x which causes the "Choose 1 or 2" boot menu and which 2008 Mac Pro (and 2009) work with.
You aren't the first or only person to run into this, and there are people running on 2006 Mac Pro.
http://forums.macrumors.com/forumdisplay.php?f=86
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0

Swap Hard Drives Between Mac Pro's

I have a MacBook Pro "Core 2 Duo" 2.53 15" (Unibody - Late 2008) that has been upgraded from the standard 320 GB SATA hard drive, to a Seagate 750 GB SATA 16 MB cache 7200 rpm hard drive.
I have recently upgraded to a MacBook Pro "Core 2 Duo" 2.66 15" (SD - Mid 2009) that has the standard 320 GB SATA hard drive.
Both are running Mac OS X Snow Leopard 10.6.8.
I will be selling my older (2.53GHz) Mac Pro but would like to keep my larger hard drive.
Question
Can I simply swap the hard drive out of my older (2.53GHz) Mac Pro and install it into the newer (2.66GHz) Mac Pro, without having to reinstall the Mac OS X software?
I no longer have any of my OS X install disks.
Will the 750 GB hard drive still perform the same in the newer Mac Pro, given that they are running the same OS?
Thanks in advance!

From what I understand the USB/PCIe interfaces are (somewhat) device specific. But it depends on the particular vendor in question.
According to barefeats.com, regarding USB devices:
"...Our only concern was that it {the CalDigit adapter} only worked with CalDigit USB 3.0 enclosures like the AV Drive. They since updated the driver to "unlock it." In fact, all the USB 3.0 results posted above for non-Cadigit enclosures were done with the CalDigit PCIe USB 3.0 host adapter...."
So, for example, the Lacie PCIe adapters are "specific". Only works with their stuff. Originally the CalDigit PCIe adapter was the same: limited to use with their devices only. But they've altered that so that it is more generic. In fact, it was used to test the other USB 3.0 devices in the barefeats tests.
So the CalDigit card, at least, is a more flexible choice.

Installing Windows 7 over XP on a Mac Pro

Hi Folks,
I have Windows XP dual booting on my Mac Pro using Bootcamp. I want to install Windows 7 over Windows XP. I know I will loose all of my windows files and will need to reinstall all windows software. But will this work? Will it impact my mac os? Are there any issues I should be aware of?
Any help/suggestions would be most appreciated.
TIA,
Shane

Lion is the easiet way to get current drives and because Apple security is better on 10.6.8 and Lion. Lion though really needs to reformat the drive the OS goes to (keep the old one as dual boot backup) and needs to add Lion Recovery.
There are no Apple support drivers w/o 10.6.3+.
8 is free and runs well or better -
so just boot Windows 7 and format the partitiion. What's to know? You want Windows 7 Pro if you have two processor (dual socket) or want to use more than 16GB RAM.
You do not want 32-bit. But it does matter what Mac model, 2006-7? or later. 2008 has full support for Windows 64-bit, the others don't but then you get stuck with trouble booting and trouble using more than 1.9GB making it next to impossible. That is and will be an issue.
And you need 10.6.3 DVD to have the Apple support software.
The number of threads moved and placed in wrong forum (Mac Pro turns out to be MacBook Pro) so I have to ask and because there ARE issues with Windows 7 on early Mac Pro model.

Can I format an IDE Hard Drive from Mac Pro?

I use a mid - 2012 Mac Pro; run Mavericks OS X 10.9.2.
1. Can an IDE hard drive (using an external drive) be formatted to 10.9.2, from my Mac Pro using Mavericks? (the IDE hard drive is new/unformatted).
2. Once formatted to 10.9.2, can I reformat the IDE hard drive to Mac OS X Leopard 10.5.8, from my Mac Pro using Mavericks?
3. If so, would should I do to accomplish Question # 2 above?

The version of the OS that is running is not relevant to formatting the drive. When you format a drive in any OS, you should select "Mac OS extended journaled." (That is, unless you plan to share the drive with a Windows computer.) Formatted this way, the drive can be used with any version of Mac OS.
You do not have to reformat the drive each time you connect it with a different OS.

Installing windows on dedicated hard drive on Mac pro

Similar Messages

Maybe you are looking for