Installing Windows On Multiple Macs With Boot Camp?

I have an iMac, White MacBook, MacBook Pro (Late 2006) and very soon I should be getting a Unibody MacBook Pro. My question is, I plan on buying Windows 7 for Boot Camp, and I was wondering if the install limit applies even with Boot Camp. I read that Windows only installs on one computer at a time, and I was curious that if with Boot Camp, it still holds true. Any help would be appreciated.

For now, Windows 7 is free RC download. And there are hints in the EULA that a Family Pack could be in the offering.
I usually buy System Builder, and you can buy Vista SP1 with $9.95 or free upgrade to 7 - retail, Ultimate to Ultimate.

Similar Messages

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

yeah I use a windows keyboard both in OS X and in windows on my imac I pref the split ms type of keyboard over the tiny apple keyboard and I pref the razor mouse so those are my main input sources in both yosemite and windows8.1

HT5628 i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks).

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

Can I install Windows on my Mac without Boot Camp Assistant?

I was wondering if this was possible, or does Boot Camp Assistant format the hard drive in such a way that makes it possible for Windows to be installed, or can I just create a new partition myself and format it and install Windows without having to touch Boot Camp Assistant?

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

MANY issues after installing Windows XP Home Edition with Boot Camp

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: "This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?" When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: Some of these problems may not be specifically "Application" related, but the top one mainly is. (in my views)
~Twilight

Twilight:
Is it possible that you installed Windows XPSP1 instead of the required SP2? If yes then that is cause of all of your issues listed in your post. You have no sound and you cannot connect wirelessly because you still have been unable to install the boot camp drivers when you inserted the leopard disk.
Please double check to see which version of windows XP did you install. Remember, you need windows XPSP2 for all this to work.
Now, in the event that you installed XPSP1 then you will need to get to the microsoft windows site on a different computer and burn the Service Pack 2 for windows XP on a CD. After that boot your apple mac to XP side and insert the Service Pack 2 disk and install the pack. After that, it will ask you to restart the computer which you must and then once fully booted into XP then insert the leopard CD again and see if takes and installs all the necessary drivers.
Axel F.

Installing windows 7 on Mavericks with Boot Camp

Hey,
I'm having difficulties installing windows 7 on my 2008 mac pro. I'm running Mavericks. I'm trying to install windows 7 onto a extra internal SSD with the installer disc and bootcamp. The bootcamp assistant hangs as soon as I hit install. The screen goes black and freezes.
Any help would be appreciated.
thnx

Hey johnnydoit,
It sounds like you might be experiencing the symptoms from the following article:
Boot Camp: iMac displays a black screen during installation of Windows 7
http://support.apple.com/kb/TS3173
There are steps within to resolve the issue, I'd run through them and see if that helps.
Best,
Delgadoh

Windows 7 64-bit with Boot Camp 5: keyboard & mouse don't work

Running OS-X 10.8.5 on iMac 27 Late 2013. Everything goes smoothly installing Windows 7 64-bit with Boot Camp 5.0.4 until Windows does its final reboot (after a complete, apparently successful install), and begins the Windows setup sequence. The first setup screen asks for User name and PC name. My mouse and keyboard do not work at this point. Tried cold rebooting: Windows boots up, detects it needs to do first use setup, and gets to same failure point.
NOTE: I have never had a chance to install the Windows support drivers; but the mouse and keyboard worked through out the istallation.
I've tried two different W7 versions: 64-bit Pro and 64-bit Enterprise [Enterprise is not supported, but I have installed it on an iMac 27 2010, and a MacBook Air 2013.]. Both versions of W7 hang at the same point described above.
I've tried a Windows DVD install disk plus Windows support drivers on a flash drive; and I've tried a bootable flash drive with everything on it. Both fail at the same point.
I have tried both wireless and USB keyboards and mouse. Same failure.
I have even tried removing the flash drive with Windows support drivers before the final reboot. Same failure.
NOTE: when I reboot in OS-X and go to the Startup Disk, the windows option says "Untitled Windows" instead of Boot Camp; but I can select it, and it starts the Windows boot which ends up at the same Windows setup failure point.
Has anyone had the same problem?
Has anyone succeeded? If so, any special actions or ideas?

The issue may be related to the iMac 2013 only having USB 3.0 ports and that windows 7 does not come with drivers for it. Try the following (borrowed from answer on Mac Rumors Forums http://forums.macrumors.com/showthread.php?t=1659481):
<quote>
If you run into issues with keyboard and mouse not working (due to USB 3.0 and Win 7 incompatibility), you need to run your Win 7 partition (and Win 7 installation disk/partition) in legacy mode. (I found this information at:http://twocanoes.com/winclone/support#faq123 - see "Method using Terminal"). Here you will be setting the legacy on the installation volume of win 7, not bootcamp partition (yet). After running the diskutil list find the volume with installer of Win 7, and then run the command (substituting the disk1s2 below with the information you find through diskutil on your computer:
sudo /usr/sbin/bless --device /dev/disk1s2 --setBoot --nextonly --legacy
Enter administrative password when prompted. Next, select Restart from the Apple menu. Do not hold the Option key while restarting.
You should have mouse/keyboard working. Begin the Windows 7 installation. Upon first restart right after the installer completes, boot into Mac and set the legacy mode for the BootCamp partition (but this time without the --nextonly flag), so you can use keyboard/mouse to complete the installation and thereafter until the USB 3.0 drivers are installed).
</quote>

Cannot install Windows 7 32-bit using Boot Camp

I have one of the new iMacs (late 2012) and I can't install Windows 7 32-bit using Boot Camp. Whenever I try to being the installation using the Boot Camp Assistant, I always get the following message: "Need 64-bit Windows installation USB drive or DVD. Boot Camp only supports 64-bit Windows installation on this platform. Please use an USB drive or DVD which contains 64-bit Windows". I have successfully installed 32-bit Windows on my Macbook Pro that is running the same version of Mac OS X and Boot Camp, but I don't know why on this new iMac it doesn't allow me to. Apple's documentation states that I should be able to install either 32-bit and 64-bit without any problem, but this is not the case here. I can't find anything about this problem/error on the Internet either. HELP!!!

AidenT wrote:
Yes, circumstances do change but if Apple is, as they claim to be, serious about seamlessly migrating what is still a large and dominant market share of users from Windows, supporting 32 bit versions is not a nice to have, but a must have.
I don't see why users have to make excuses when there is a clear shortfall of what is promised.
In other discussions, there is talk of an opportunity for Apple to make a significant impact, as Windows 8 has deviated so much from the comfort zone of traditional Windows users. But to make that change, Macs have to support what is still a primarily 32 bit environment in the installed base.
As for the use of VMs, I had a tough time migrating out of Parallels 6 after an upgrade to Mountain Lion broke compatibility so IMHO it is not a long term solution unless you are happy to hand out $50 every 2-3 years just to support the same functionality.
Use Virtual Box, it's free.
32 bit may have a reasonable user base but it's going away fast, if you must use 32 bit Windows and won't use a VM your choice is limited.
Buy a PC, or buy an older Mac.
The rest of your post is speculative and I won't go there.

Install Windows XP 64-bit on Boot Camp.

Can I install Windows XP 64-bit on Boot Camp (Tiger)? Where can i find all the driver for 64-bit? Thank you.

Hi Amen,
XP 64-bit was never supported by Apple.
Therefor you are left to find the needed drivers all by yourself and for Apple-specific hardware you won't find any drivers at all.
Use the System Profiler in OS X to determine what hardware is in your Mac and then go to the websites for these hardware manufacturers to see/find drivers for XP 64-bit.
Personally I am not sure if all this hassle is worth the outcome.
Regards
Stefan

Há uma maneira de instalar o windows 8 no mac usando boot camp com eficiencia? dizem que os drivers nao rodam

há uma maneira de instalar o windows 8 no mac usando boot camp com eficiencia? dizem que os drivers nao rodam

dizem que os drivers do windows 8 nao rodam direito no mac

Need to Re-install Windows on Mac with boot camp

I purchased a Mac Pro from someone about 6 months ago that already had a 2nd drive with Boot Camp and Windows XP Pro running on it. Today for the first time when I booted into Windows, I got an error message saying that I "may be a victim of software counterfiting" and that my version of Windows is not an authorized version in my region.
I have an a genuine Windows XP Pro disc with seriel that I want to now re-install over the bad version. The problem is when I try to run the CD for install, I get an error message stating that I cannot install from the CD because the version of Windows I am currently running is newer than that on the CD.
So my question is, how do I uninstall the bad version of Windows and re-install the version off the CD? I know I will lose my files and programs but everything is backed up and I will reinstall everything when I get back up and running.
Thanks for the help!!

You can format from Windows CD if that is what you mean by "windows side."
Updates are usually done while boot in the OS you want to 'upgrade' while custom is only done booted from other media.
With a Mac Pro you could easily install in many different ways than if you only had a laptop or imac.
But you can't "pick yourself up by your own bootstraps."
I don't even like upgrade of SL while booted in Mac OS.
If it was my Mac I'd install Windows 7 and make better use of your hardware and the performance afforded.

I have a Mac Book Pro A1226 - can i install Windows 7 on this via boot camp

I have a Mac Book Pro (A1226 -late 2007) and I want to run Windows 7 Ultimate on it via Boot camp. I am currently running Mac OS X 10.6.8 with Boot camp 3.0. For some reason I can't seem to install Windows 7 through Boot camp. Can I even install it on this computer? Would I be able to run Windows 7 on this computer if I purchased Parallels instead.
Thanks

You should try asking in the Boot Camp forum where the Boot Camp gurus hang out. Your issue has been discussed there many times.
https://discussions.apple.com/community/windows_software/boot_camp

Share files between Mac and Windows in same iMac with boot camp

Hello,
I am new in using Mac and recently I buy a IMac 24" model.
I used to use PC a long time with a lot of old document.
I want to install Windows XP with boot camp.
But I also want to share my documents, music, video files between Mac and Windows in same iMac.
How can I do this?
Thanks in advance,
Eric

Hi Eric and welcome to Discussions and the Apple world.
Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
However with FAT32 you are limited to a partition size of 32GB.
Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
Regards
Stefan

Install Windows XP in Leopard WITHOUT Boot Camp - No More Disk Error

For those of you having problems installing Windows XP in Boot Camp because of the formatting screen never showing up and then the system restarting with the dreaded:
Press any key to boot from CD .....
Disk Error
Press any key to restart
I too spent many frustrating hours trying to find a solution that worked. I searched these threads, tried many of the solutions suggested here and elsewhere, including recreating the Windows CD without a specific file, using the FreeDOS boot CD (couldn't ever get it to work, though I understand some people have had success), Reinstalling Leopard and trying again, dancing around the laptop with incense three times counter clockwise while chanting the name of my childhood pet... etc.
I FOUND A NEW SOLUTION!!!! A much easier solution!!!!
For anyone who is having this problem and is planning to run virtualization software.
(Something that let's you run Windows from inside Leopard)
SKIP BOOT CAMP ALTOGETHER!!!
USE VMware Fusion to install Windows.
I decided to try a different approach entirely and did a completely fresh install of Leopard (not sure if that was necessary or not but with everything else I had been trying I wanted to clean it up anyhow) and then installed the 30 day trial version of Fusion w/ the unlock key VMware emailed me.
I entered my information and Windows product key into Fusion's "Easy Install" Interface, clicked install, and about 30 minutes later I was browsing around in XP.
I HIGHLY recommend this option for anyone having difficulty with the formatting screen not showing up. I have a Bachelors Degree in Information Systems and still spent the better part of 2 days working on this boot camp problem, including numerous hours with the higher tier of apple's tech support. I suspect that those of us having this problem may have an OEM or systembuilder copy of XP... but that is for Apple to deal with - not me, I have better things to do with my time.
If you are planning to run Windows from within Leopard anyhow, just buy Fusion and to **** with the hassle.
You can go to VMware's website and get a 30 day evaluation copy to see if this will work for you before you decide if you want to purchase it, they will email you the unlock key.
Best of luck, hope this saves someone some time!

For what it's worth, I've used the OEM version (copper disk), Select version (bulk license), and an NFR (partner program) version of XP Pro with SP2 and they all worked. On my MacBook Pro's I use boot camp to split the disk in two, reboot using the Windows CD, and pick the partition to format it.
Apple states that you need a full version of Windows, and the OEM versions are slightly different from the commercial versions, but both should work. On my Mac Pro, I created a 3-disk OS X RAID-0, and left the 4th disk alone. I rebooted with the Windows CD and installed Windows to the 4th disk without Bootcamp at all. Once Windows was installed, I used the Leopard disk to install the Bootcamp drivers. The Mac side has no Bootcamp installation but I can still choose between the volumes by holding down the option key at boot time or by setting the startup volume in the OS X Startup disk preference pane.
The solution to use virtualization, unfortunately, will not work for many situations where graphics are involved. Most current major products, such as AutoCAD, 3dsMax, and so forth, will not run properly or at all without specific DirectX 9 or OpenGL support. To date both Parallels and VMWare do not completely support DirectX or OpenGL.

Installing Windows On Multiple Macs With Boot Camp?

Similar Messages

Maybe you are looking for