Installing windows parallel and partitioning MacBook harddrive
I'm hoping this will be straight forward.
I've Windows Parallel program that I want to install on the MacBook 13" and want to
partition the MacBook drive so that it runs a good percentage of this (Windows Parallel) program.
But also leave enough space so that it can run OS Leopard on it and few programs without causing
any conflicts.
Appreciate any thoughts as I want to load this in a few hours.
Do I need to do anything beforehand to partition the drive for Windows?
Also I'll be adding MicroSoft 2003 after WP is loaded.
thanks in advance ~A~
Atcandela wrote:
I've Windows Parallel program that I want to install on the MacBook 13"
Please explain what application that you're speaking of. There is a program called Parallels Desktop by which one may run ms windows on a Mac but your description doesn't match its behavior. If you've purchased a software package, please indicate the title of it so that the forum may be of assistance. -GDF
Similar Messages
-
I am installing Windows 7 and I get an error message: "Your disk could not be partitioned. An error ocurred while partitioning the disk". I was using a Windows & Home Premium OEM Software that I purchased from Microsoft. I was given to Windows 100GB to use for Quickbooks pro, Payroll and Publisher. I have the Macbook Pro model No: MD102LL/A. Does anyone knows what happenned or can advice me in what to do? Please help!!!
amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive -
I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.
OS X can natively read NTFS of Windows, but not write to it.
Windows can't read or write to HFS+ of OSX, and that's a good thing from a security standpoint.
Ideally if you share files between operating systems you should have a FAT/MSDOS formated USB key or hard drive. (exFAT external drive if any of your files are over 4GB in size) both these formats are universal for OS X or Windows.
If you install software into Windows and OS X to read each others formats, then you have to pay to update/upgrade it deal with headaches.
If you swtich between Windows and OS X a lot, don't need full hardware performance for Windows, you may consider installing virtual machine software like VMFusion or Parallels which can take a copy of your Windows in Bootcamp and place it into OS X as a file then run that copy of Windows in a window in OS X like so.
Advantage here is you run most of your light weight Windows programs like this at the same time as OS X.
Benefit is you can run just about any Windows or Linux version and OSX server editions (not client versions)
Bootcamp only allows Windows 7, that's it now.
You'll also be interested in two fre pieces of software, Carbon Copy Cloner and Winclone on macupdate.com.
CCC clones OS X partition and Winclone clones the Bootcamp partition. Valuable for you.
Good Luck -
I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth
I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth, because when i click the wireless in settings there are no choices... but when i use the mac os, everything is fine, the wifi, the bluetooth everything is functional, can you help me fix this problem? help will be much appreaciated.. thanks
How did you install Windows? Did you use Bootcamp Assistant or did you use a virtual machine like Parallels, Fusion, or VirtualBox.
If you used Bootcamp Assistant, did you download and install the Windows Support software (drivers) in accordance with the Bootcamp instructions? -
Just installed windows 7 on my macbook (Mac OS X Snow Leopard) using bootcamp. Windows 7 works great, but I can't get back to my Snow Leopard. When I log off or shut down Windows and try to start up again, all I get is Windows. How do I get back to my mac operating system?
If your Mac is off then start up. As soon as you hear the boot chime, hold down the Option key until the Mac and Windows Disks show up. Then click on the Mac disk and the arrow below it. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.
If you are in Windows then look for the Boot Camp icon on the taskbar. It will look like a gray box sitting on one corner. One of the options when you click it is to restart in Mac OS. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk. -
How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
-I have a flashdrive with win7 on it.
-I mounted the ISO of win7 with toast for bootcamp to do its thing.Good luck.
Consider this a bump so that hopefully someone with better news spots your thread.
Allan -
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped
Welcome to Apple Support Communities
You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers -
I have installed windows 7
and then searched for drivers then I found on mac support
that I had to burn a copy of the drivers for my laptop
so I had a late 2010 iso version installed on my macbook air.
How can I get a copy of drivers for my version
to work with windows 7.
I have windows 7 installed and working but got no sound, pad is not working
and all the commands + functions are not working as well and camera also
I would highly appreciate any help
specially if someone has a mackbook air late 2010 drivers copy and willing to share with me
Thanks in Advanced
NetsolRead and follow the Bootcamp Installation instructions that you were offered to view when you ran Bootcamp Assistant.
Run Bootcamp Assistant again and select the option to download the Bootcamp Support software. Follow the instructions. Then boot into Windows and install the Windows Support software you downloaded and saved. -
When I install Windows 8 on my MacBook Pro(13-inch,Early2011),the Super DVD Drive doesn't appear in Windows 8 and installing Boot Camp 5 drivers doesn't solve my problem,what can I do?
Go into your system preferences and click the startup disk icon then select your Mac HD.
-
I tried to install windows 7 in my macbook pro late 2011 but i tried to create partions after it installed and it turn to dynamic disks and i can't access mac or win 7 what should I do i cant format it because i dont have a backup
It's not that you can't format it because you have no backup, it's because you'll lose everything when you do. Lesson learned. Always have a backup.
-
i Installed windows 7 on my macbook pro 13 inch Late 2011 with bootcamp, i have no wireless icon or bootcamp icon, i checked my flash drive and it is blank!! what do i do?
Download and intall the Windows Support software. You can start Bootcamp Assistant again and only select the option to download the support software. Then follow the instructions to save and install the support software.
Or, manually download the support software here http://www.apple.com/support/bootcamp/downloads/. -
I have usb driver in may macbook pro 15 retina. When I installed windows 7 and try to download windows support into a CD, boot camp always said it couldn't find my usb driver. My mac version is 10.8.3
Welcome to the Apple Support Communities
Install the Windows support software from the USB drive. Note that Boot Camp Assistant, in OS X 10.8.3, doesn't support the option to burn the Windows support software into a disc.
Instead, you can try a different thing. Start in Windows and download the Windows support software in it > http://support.apple.com/kb/DL1638 Then, decompress the file and run the Boot Camp drivers installer.
If you can't access to the Internet in Windows, start in OS X and download the Windows support software from the same link. Decompress the file, right-click the folder which will show up after decompressing the file and select "Burn". Finally, start in Windows and install the Boot Camp drivers -
Trying to install windows 7 and getting error message Windows must be installed to a partition formatted as NTFS
Welcome to Apple Support Communities
Boot Camp Assistant creates a Windows partition in FAT32 to make the Windows XP installation easier.
The problem is that Windows Vista, 7 and 8 require a NTFS partition, so the Windows installer gives this error. The only thing you have to do is to choose the BOOTCAMP partition in the installer and go to “Drive options (advanced)” > Format. Finally, install it
Maybe you are looking for
-
I plug my mophie in to charge. When i hit the little circle 3/4 circles light up and the fourth blinks. does this mean the case is charging?
-
Hi, If we are using the BPM patterns. what are the necessary steps to do in IR and ID
-
Aggregate and variable one-to-one
Hi, I would like to create a variable one-to-one mapping in my aggregate target descriptor, but when I want to set up the query key associations, the foreign key field is disabled. Is this not possible, or am I missing something? Regards, Katarina
-
How to turn off Safari in order to install Adobe
I am using an I Mac and need to know how to turn off Safari as required to install Adobe
-
Regarding joesilva's problem with the one computer that can't get on the internet.
this is joe, i left a lot of info off on the first discussion, sorry. there is nothing wrong with my airport, it just can't logon using the verizon jet pack. i was having so much trouble with it that i suspected it was something that verizon had don