Installing Windows PE to Boot From A Removable Drive

This article on Technet says, "On UEFI-based PCs, Windows PE requires a boot partition formatted using the FAT32 file format." I've successfully formatted WinPE-boot
USB media using NTFS. The article goes on to recommend locating WinPE in a FAT32 partition and files larger than 4GB in a separate NTFS partition. Any reason why we shouldn't use a single NTFS partition?

Hi,
I think the article mentioned that Windows PE requires a boot partition formatted using the FAT32 file format is under the condition UEFI, not means Windows PE must formatted using the FAT file format.
In addition, why UEFI based PC need FAT32 file format PE, I think it should Considering the compatibility problems.
You can refer to the link below which had another explaination:
UEFI based systems such as the Surface Pro or other UEFI systems require that the boot files reside on FAT32 partition. If they are not FAT32 the system may not see the device as bootable.
http://blogs.technet.com/b/askcore/archive/2013/03/20/creating-bootable-usb-drive-for-uefi-computers.aspx
http://en.wikipedia.org/wiki/Unified_Extensible_Firmware_Interface
Roger Lu
TechNet Community Support

Similar Messages

HP ENVY dv6-7246us SSD Upgrade, Problem Installing Windows 7 with boot from usb/dvd disc.

Hello everyone,
I have recently purchased the dv6-7246us and have upgraded the HDD to a SSD. The problem I am having now is that I can't boot from the usb or a dvd disc that contains the Windows 7installation. Originally this laptop had an HDD with Windows 8. I have changed the boot order multiple time to boot from the USB Harddrive and the DVD/CD-ROM disc and still have no luck booting up from the installation. Is there a solution to this problem?
Thanks,
Robert
This question was solved.
View Solution.

Hi, Robert:
Did you go into the BIOS and change it to Legacy Mode?
I believe you need to do that in order to boot from another device other than the hard drive.

I have heat issues into MacBook pro after installing windows 8. when boot from windows ha've overheating. how can I fix it??

Have heat issues into MacBook pro when boot from windows partition how can I fix it??

panarpan wrote:
Have heat issues into MacBook pro when boot from windows partition how can I fix it??
Are you saying you're running Windows in BootCamp or Windows as a Virtual Machine? You can increase the fan speed on the Mac using smcFanControl and use the software OGELTHORPE recommended to observe improvements.
smcFanControl is a Mac application and doesn't work in Windows, but if you set a higher minimum fan speed (which is how smcFanControl works) while running OS X, when you reboot into a BootCamp partition, that minimum speed tends to be carried over.

Getting Windows 7 to Boot from Second Disk Drive

Recently I purchased a solid state drive for my HP desktop. The desktop is running 64 bit Windows 7 Premium (HP upgrade from Vista).
My goal is to have the operating system boot from the new SSD and not from the original hard drive. I have done the following:
1. Installed SSD and plugged it into SATA slot 1 on motherboard. The original drive remains in SATA slot 0.
2. Formatted SSD and assigned new drive letter "K" (next available) in Windows 7.
3. Using Acronis, I "recovered" a previous backup of the operating system onto the SSD including boot sector.
3. In BIOS, selected boot order for SSD to be ahead of original drive.
However, when starting Windows, the operating system is clearly running from the original drive, not the SSD.
Questions:
1. In older operating systems, it mattered what SATA slot the "boot" drive was plugged into. Should I have plugged the SSD into slot 0 on the motherboard instead of slot 1? Does it matter with this PC and Windows 7?
2. Does the Windows 7 operating make calls to drive C without regard to where it boots from? If yes, how do I rename the SSD to "C"? (I'm thinking I should unplug the original drive from the motherboard altogether then try a rename).
3. Are there other issues I have not recognized? Loading the OS from an SSD sounded so simple before I started!
All advice will be gratefully appreciated. Thank you.

Hi, you will need to either change the drives bootup order in the BIOS or select it from the bootup menu at startup (press F9 I think). See this topic Re: HP Pavilion Elite e9180t Storage Upgrade in Desktop Hardware for more details. Good luck.
Thanks,
HP Employee

Panther is installed but won't boot from iBook hard drive

Hello,
I made a similar post in the iBooks colors section of Discussions on this topic not quite knowing whether this was a hardware or software issue. I finally got Panther to install after using Disk Doctor to check for and fix errors on 9.2.2 (I would never use with OSX) and also rebuilt the directory while booted from an OS 9 CD and running Disk Warrior from a floppy and taking out the airport card. The Panther CD told me to restart the computer after installation. During the OSX start up from the hard drive I saw a gray screen and the dark gray Apple logo with the spinning gear then the computer crashed and a message appeared that I needed to restart the computer. After restart, the same sequence of events happened again. I have tried to restart from the OSX using the full retail CD used for intallation and the computer also crashes. I cannot start up from the Disk Warrior CD either. I have also tried make a Safe Mode start up and the iBook again crashed with the restart message appearing again. When I restart in OS 9 everything works perfectly, OS, airport and applications. I did have Jaguar installed on this iBook until five months ago, but incounterred issues with it and decided that more RAM would solve my problem. I then decided to initialize the hard drive and reinstall OSX after purchasing 256 RAM. The 256 stick of RAM was bought from ifixit.com and a guy there told me he thought that the logic board needed to be replaced. I explained to him that the computer works perfectly fine in the OS 9 mode, but he said that 0SX is more demanding and 9 can get by on less than perfect logic board. I also reinstalled the 128 MB RAM that was in the computer when Jaguar was running on it, but that didn't help either. I have scoured the iBook and Panther OSX sections of Discussions for any others having a similar problem, but not such luck.
I would appreciate any information or suggestion that you might have as to what may be causing this issue on my iBook.
Thank you.
Greg
iBook Mac OS X (10.3.5) 300 mhz 320 MB RAM

Greg:
You have probably already tried this, but the first thing I would do is reset the PRAM.
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Also, check out this Apple article Your Mac won't start up in OS X.
Good luck.
cornelius
PismoG4 550, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X (10.4.5) Mac OS X (10.4.5) Beige G3 OS 8.6

How to install windows 7 using boot camp and usb drive?

Hey,
I wanted to install windows 7 on my mac 10.6.4 and I only have windows 7 in a external hdd, so what can i do so i can install?
Thanks in advance
Ala.

He's implying you can't. You need your original install DVD to install it on your Mac, just as you would if you were to install it on a PC.

I tried installing Windows 7 using Boot Camp, but it didn't work, I don't know how to "unparticion" the memory I gave to Boot Camp, and Boot Camp "vanished", help...

I tried installing Windows 7 using Boot Camp, but it didn't work.
Although it didn't work, the memory is still divided. So I looked for Boot Camp in aplications, but it literally vanished...
So I tried downloading it again, but I only found EXE files... they don't work on my MacBook Pro...
It's very new... Bought it recently...
Please... I need help to unparticion memory back to original Mac HD and install Boot Camp...
Thanks...

Below is the paragraph from the instructions. Follow it exactly and then report what happens at each stage.
How you remove Windows from your computer depends on whether you installed
Windows on a second disk partition or on a single-volume disk.
If you installed Windows on a second disk partition: Using Boot Camp Assistant as
described below, remove Windows by deleting the Windows partition and restoring
the disk to a single-partition Mac OS X volume.
If your computer has multiple disks and you installed Windows on a disk that has only one
partition: Start up in Mac OS X and use Disk Utility, in the Utilities folder, to reformat it
as a Mac OS X volume.
To delete Windows and the Windows partition:
1 Start up in Mac OS X.
2 Quit all open applications and log out any other users on your computer.
3 Open Boot Camp Assistant.
4 Select “Remove Windows 7,” and then click Continue.
5 Do one of the following:
a If your computer has a single internal disk, click Restore.
b If your computer has multiple internal disks, select the disk with Windows on it,
and then select “Restore to a single Mac OS partition” and click Continue.

Installing Windows 7 With Boot Camp on Mac Pro 3.1 w/GTX285 Video card

I have an Early 2008 Mac Pro 3.1 running the latest version of OS 10.6 with all updates. I have an nVidia GTX285 card installed in the Mac Pro that has been working fine for at least six months under OS 10.6 with Mac drivers downloaded from the nVidia web site and installed under OS 10.6. I replaced the ATi 2600XT video card with the nVidia GTX285 in order to have CUDA support in Premier Pro CS 5 and it works beautifully.
I now wish to install Windows 7 Professional 64 bit on this Mac Pro. I have never had any version of Windows installed on this Mac Pro. I am using Boot Camp assistant and a new full version of Windows 7 Professional 64-bit.
My question is do I need to remove the GTX 285 graphics card and replace it with my AT 2600XT before installing Windows 7? This would be a real pain to do because the two connectors to the motherboard are hard to get to. However, since Apple never used the GTX285 in any of its computers, I am worried that I will not have any video display when I go to try and install Windows 7 with Boot Cam assistant.
Please advise me whether removing the graphics card is necessary before installing Windows 7 with Boot Camp.
Thank you in advance for responding.
Tom

NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
How I would proceed -
Install Windows on its own drive.
Pull all the other drives.
Boot from Windows 7 Pro DVD
Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
The Mac Pro is as close as anything to a standard Wintel workstation.
Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
AV-Test.org Test Security-Software

Select CD-ROM Boot Type Error installing Windows 7 in Boot Camp walkthrough

Much thanks to John Anderson at AndersonHatch.com for his excellent
walkthrough for installing Windows 7 x64 in Boot Camp.
Since his post there has been an update to ImgBurn which adds a few
screens and dialogues whose proper navigation may not be obvious. He
also left out a few choices that SHOULD be obvious but you know how
THAT goes.
Here then, cribbing liberally (plagiarizing, actually) from John's
walkthrough, but including some "for idiots" footnotes (which are
more for my own benefit than yours), is the most current (as of March,
2010) walkthrough, which presumes you have a DVD of Win7 (if you
downloaded an iso file from somewhere I'm sure the instructions are
similar but I'm not exactly sure how. Perhaps someone can add a
comment with this variation?)
ON A WINDOWS MACHINE:
1: Download and install ImgBurn.exe from the cloud.
2: Insert your Windows 7 Install DVD, preferably into your
---DVD-ROM drive but if possible into an orifice of whomever is
---responsible for ordinary shmoes like you and me having to spend an
---entire day Googling this problem and then following a simple
---27-step procedure to do the most basic thing you can do on a computer
---which is to install an OS. This is before we can even use the computer
---to do anything useful which at this point is a dubious prospect. But I
---digress...
3: Extract your boot image as follows:
---a. Using ImgBurn, go to "Build" mode. All fields should be blank at
-----this point.
---b. Select the "Advanced" tab.
---c. Select the "Bootable Disc" tab
---d. In the dropdown under "Extract boot Image" select your DVD drive
-----and then click on the the little disk icon to the right of the
-----dropdown. A "Save As" window opens. Choose a location on your hard
-----drive to save to and keep the filename "BootImage" and click "Save."
-----This operation only takes a few seconds. ImgBurn presents a dialogue
-----box upon success.
---e. When it asks if you would you like to use the boot image file in
-----your current project say "Yes."
4: Add your disk to your new disc image
---a. On the left side of the ImgBurn window in the "Source" panel
-----click the little folder icon (second down from the plus sign)
-----and browse to select your Windows 7 Install DVD (Just select
-----the entire drive, no files or folders inside it). Hit OK.
---b. Select the "Options" tab on the right. Data Type: MODE1/2048.
-----File System: ISO9660. UDF Revision 1.02.
---c. Only the "Recursive Subdirectories" checkbox should be checked.
---d. Select the "Advanced" tab again.
---e. Select the "Restrictions" tab
---f. Select “Level X – 219 Characters”
---g. Select "Standard" character set.
---h. Select only the following checkboxes:
-----Allow More Than 8 Directory Levels
-----Allow More Than 255 Characters In Path
-----Allow Files Without Extensions
-----Don't Add ';1: Version Number To Tiles
---i. Select the “Bootable Disc” tab again. Make sure “Make image
-----bootable” is checked.
---j. Select "Emulation Type: None (Custom)" in dropdown.
---k. The "Boot Image" (which should already be filled in if you said
-----"Yes" in 3e) should be a path to the file "BootImage.ima." If not,
-----select the BootImage.ima file you created in Step 3.
---l. Load Segment: 07C0
---m. Sectors to Load: 8
5: Build your new iso.
---a. Under "Extract Boot Image" select your DVD-ROM drive again.
---b. Enter a name for your new iso on the left under "Destination."
-----Use the folder icon to the right of the dropdown, or enter a
-----filename manually. You can call it anything. I called mine "New7."
-----Make sure you are saving it to your hard drive, not back to the
-----DVD-ROM drive.
---c. The "Source" field in the upper left should be blank but the
-----directory is "D/:' I know this is confusing but trust me.
---d. Click the big folder pointing at a disc document icon at the
-----bottom left to create your new image! This operation may take
-----a few more minutes of your precious life. Oh well, there's plenty
-----where those came from...
---e. Here is where ImgBurn gets way too helpful. Decline its offer to
-----change the setting from "UDF" to ISO9660 + UDF." Just say "No."
---f. Laugh at the politically correct dialogue for "Confirm Volume
-----Label" and click "Yes" or just wait 30 seconds for the
-----programming gremlin to do it for you.
---g. Click "OK" for the useless (to non-propellerheads) "File,
-----Content, and Data" info dialogue box (but thank you ImgBurn!)
6: Burn your new iso.
---a. Go to burn mode, baby.
---b. Select the iso file you created in 5b.
---c. Remove your Windows 7 Install DVD and insert a blank DVD,
-----preferably into your DVD-ROM drive but...
---d. Select your destination blank DVD and click the "Burn" button.
If you have ADHD like me you can skip the "Verify" cycle (the disk is
probably fine) and use it to install Windows 7 x64 on your Mac and
return to your regularly scheduled life.
Enjoy!

You cannot stuff a UEFI into an EFI32 ROM, there isn't room; EFI32 is 2005-2008; UEFI 2.x was the first to support 64-bit.
Apple does have an article on which Macs DON'T support 64-bit Windows (I think it actually just says my Mac Pro 2006 doesn't support Windows 7, which of course I am running! But had extra hoops.
It is possible to install Windows 7 32-bit on one drive, then boot into that, and install Windows 7 64-bit ON A SEPARATE drive or partition (my mac has 4 internal drives). Else, you get into 'triple boot' and the pitfalls and problems.
Technology changes and you can't always go back. Even having a 64-bit processor is only part of the equation.

I install windows 8 via boot camp but its corrept so i recover this by the bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automaticly now its become a pc how can i install my mac osx again?

i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me

If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Am I able to install Windows 7 in Boot Camp with this HDD partition setup?

I recently upgraded from Snow Leopard to Lion, and my Boot Camp partition was obliterated beyond recognition. Fortunately I have backups, but I'm having issues re-installing Windows 7. This is what my disk looks like:
Mac OSX - Current Lion partition
Untitled - Where Boot Camp / Windows 7 used to live...
Shared - 1TB of shared data... Media/Documents/etc
This is the error I get when trying to install Windows 7 with Boot Camp Assistant...
From what I can tell, this means I won't be able to do it without wiping the Shared partition? Or is there a workaround I can use? I'd really hate to have to move all of it over to an external hard drive, since I don't have one with 750GB of free space handy...
And would this probably happen again once Mountain Lion comes out? I'll be getting that pretty much on launch, so should I hold off on messing around with this if I'll likely have to do it all again in a few weeks?
Thanks in advance to anyone who can help!
- Mark

Why don't you invest in a 1.5TB drive and case? And add to that a TimeMachine drive (and a small 40GB or even less "Emergency OS X" partition on it... a must - could even have clone of Lion and Lion Recovery on it, AND TimeMachine partition.
If you don't have a backup, it almost always will "rain" on the parade.
If you try booting from Windows 7 DVD and aim it at the parittion, what happens? tried?
To use BCA yes it is one partition and one way only.
You could remove " - " the UNTITLED volume and then expand Mac OS volume to fill that area, or plan for and setup Lion Recovery space too.
http://support.apple.com/kb/HT4718
People have managed. Usually planning ahead up front for a setup like this.
CLONE OS X and ~ or install Lion on an external drive and create a Lion Recovery partition.
http://www.bombich.com/software/ccc.html
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html

I have macbook pro 13.3 inch. I am installing window 7 in boot camp manager after copying file of window upto 67% it doesn't response and i had forcely shotdown my macbook. Now my macbook doesn't open and stop in black screen with cursor blinking.

i have macbook pro 13.3 inch. I am installing window 7 in boot camp manager after copying file of window upto 67% it doesn't response and i had forcely shotdown my macbook. Now my macbook doesn't open and stop in black screen with cursor blinking. Now how could i open my macbook pro.

At startup hold down the Option/Alt key and from the screen that comes up select your OS X partition to start the computer from. Then use the Boot Camp Assistant app to Remove Windows and the partition you reated for it and it will Automatically place the space you allocated for the Windows install back into the OS X partition.
NOTE:
Do NOT use Disk Utility to erase the partition that was created for the Windows install. Use the Boot Camp Assistant app again to do that.

Windows partition wont' boot from internal secondary HDD? No bootable device error

Here is my scenario: I previously had a 500GB bootcamped HDD in my 2012 macbook pro. The boot camp partition was running windows 7 and the mac partition was running 10.9. I replaced my original HDD with a 250GB SSD, took out my optical drive, and replaced that (op drive) with my original HDD. When i boot from the main drive, the SSD, it successfully recognizes the HDD with the 2 different partitions on it. But when I try to boot into my windows partition(on the HDD) by holding option at startup and selecting the windows partition, I keep getting a black screen "No bootable device. Insert boot disk and hit any key". I tried installing rEFIt, but still no luck. Here is the output from partition inspector:
* Report for internal hard disk *
Current GPT partition table: # Start LBA End LBA Type 1 40 409639 EFI System (FAT) 2 409640 487127591 Mac OS X HFS+ 3 487127592 488397127 Mac OS X Boot
Current MBR partition table: # A Start LBA End LBA Type 1 1 488397167 ee EFI Protective
MBR contents: Boot Code: None
Partition at LBA 40: Boot Code: None (Non-system disk message) File System: FAT32 Listed in GPT as partition 1, type EFI System (FAT)
Partition at LBA 409640: Boot Code: None File System: HFS Extended (HFS+) Listed in GPT as partition 2, type Mac OS X HFS+
Partition at LBA 487127592: Boot Code: None File System: HFS Extended (HFS+) Listed in GPT as partition 3, type Mac OS X Boot
Ive seen similar post, but none specific to my scenario. Any input would be greatly appreciated. I am trying to preserve the contents of my original HDD as it contains important school files I will be needing.

Please download Gdisk from http://sourceforge.net/projects/gptfdisk/ . You do not have a valid MBR on disk1 so Windows will not boot, even though you can see the volume in OS X Finder on the HDD.
Use Gdisk to recreate a Hybrid MBR which includes GPT#4.
Here is an example. Please notice the spaces between 2,3 and 4.
sudo gdisk /dev/disk0
GPT fdisk (gdisk) version 0.8.10
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: hybrid
BSD: not present
APM: not present
GPT: present
Found valid GPT with hybrid MBR; using GPT.
Command (? for help): p
Disk /dev/disk0: 490234752 sectors, 233.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 59BDFEEB-1EB4-4529-94FE-3CBC2C3CD513
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 490234718
Partitions will be aligned on 8-sector boundaries
Total free space is 2604 sectors (1.3 MiB)
Number Start (sector)    End (sector) Size       Code Name
   1              40          409639   200.0 MiB   EF00 EF
   2          409640       401060383   191.0 GiB   AF05 Macintosh HD
   3       401060384       402329919   619.9 MiB   AB00 Re
   4       402331648       490233848   41.9 GiB    0700 Microsoft basic data
Command (? for help): r
Recovery/transformation command (? for help): h
WARNING! Hybrid MBRs are flaky and dangerous! If you decide not to use one,
just hit the Enter key at the below prompt and your MBR partition table will
be untouched.
Type from one to three GPT partition numbers, separated by spaces, to be
added to the hybrid MBR, in sequence: 2 3 4
Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? (Y/N): y
Creating entry for GPT partition #2 (MBR partition #2)
Enter an MBR hex code (default AF): AF
Set the bootable flag? (Y/N): n
Creating entry for GPT partition #3 (MBR partition #3)
Enter an MBR hex code (default AB): AB
Set the bootable flag? (Y/N): n
Creating entry for GPT partition #4 (MBR partition #4)
Enter an MBR hex code (default 07): 07
Set the bootable flag? (Y/N): y
Recovery/transformation command (? for help): w
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/disk0.
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Warning: The kernel may continue to use old or deleted partitions.
You should reboot or remove the drive.
The operation has completed successfully.
Now Reboot and verify the output of fdisk again.

Error 0x80070017 when installing Windows 7 via Boot Camp...

I've been trying hard to research this issue and haven't come across anything that has worked for me.
At work, we have an iMac (Early-2009) that we wish to install Windows 7 on. Previous user has left, so I reinstalled Snow Leopard (10.6) and used Disk Utility from the disc to reformat complete to GUID single partition Mac OS Extended (Journaled), which is pretty standard for Macs. Mac OS X installed and booted just fine. I updated completely to 10.6.8 and all other updates. Only installed Microsoft Office 2011 and Firefox.
So Boot Camp begins...
Found that the early-2009 model doesn't "support" Windows 7 64-bit, so we are fine going with 32-bit. The 32-bit Windows 7 disc has been used to install Windows 7 using Boot Camp on 2 Mac Mini's (one Intel Core Duo, the other one Intel Core 2 Duo) just a few days ago.
Opened Boot Camp Assistant, partitioned the 1TB drive equally, inserted the Windows 7 disc, and clicked Restart.
It boots from the Windows 7 disc, I go through the options, choose the BOOTCAMP partition and format it (I assume Windows 7 is choosing NTFS for me). Click next.
It copies the files instantly, but then "begins" to Expand the files. It remains at 0% for 5-10 minutes (I can hear the Windows 7 DVD spin down and spin up, but mostly spin down). That's when the error hits:
"Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070017"
I click Ok and cancel the install. Restart and boot back into Mac OS X. And here I am.
Important Notes:
I've tried multiple times with a 64-bit disc as well. I will likely go check out another 32-bit disc from our software department, but I know this disc works on other Macs.
This issue occurred a month back as well when we attempted to install Windows 7 via Boot Camp (so before the hard drive and OS were reformatted and reinstalled). I was hoping reformatting and reinstalling the Mac OS X would solve the issue.
The Superdrive appears to be working just fine.
I read somewhere that I need to use repair disk to fix it. Does anyone know if I can repair disk a NTFS partition? Or am I suppose to repair disk the parent drive itself? The place I read it wasn't specific AT ALL and the forum was closed and I couldn't find a way to get a hold of the person. It just said "Repair disk did the trick". People, if you find a solution to your own problem, POST the solution!
Thanks in advance!

Yea, I saw that kb article. I verified we have the early 2009 iMac. It's an iMac 9,1 (3.06 24-inch, A1225).
As far as different hardware, I really don't think so, but I'll have to double check with my fellow employees. The specs all match up, but I'll see if anyone remembers having to replace hardware or send it into Apple.
I did think of trying an external DVD drive too, I'll see if I can scrounge one up. I'll post if it works or not.
The employee using the machine knows Windows, but is willing to learn the Mac OS X. Diversify your experiences I always say!
An added note to the Repair Disk "solution". Turns out you can't run Repair Disk on NTFS partitions or the parent hard drive that contains that partition, which makes since. I can only run Repair Disk on the HFS+ partition which did no good. (This is, of course, from booting up using a Mac OS X Install DVD).
Mac_Win, thanks for the suggestions!

Installing Windows 7 with boot camp as whole partition on 2nd internal hard drive

Hi all,
I am unsure what is the recent changes with Apple boot camp. But when I used boot camp utilitiy on my Mac Pro (Mid 2010) to install windows 7 64 bits. It would not install and created a whole lot of problems.
After I initialise the process to install windows 7 using boot camp utilities, I chose the option to create a single partition to installl windows 7 on my secondary internal hard drive (1TB). After I restarted my Mac Pro and started the Windows 7 installation process, I was unable to install Windows 7 on the BOOTCAMP partition created by the boot camp utilitiy. I got an error something about Windows cannot be installed on the selected forum because the driver contained GPT details.
I tried to format the BOOTCAMP partition, but it ended up with errors. I tried to delete and recreate the BOOTCAMP partition in Windows setup, but failed with errors again. As I could not go any further with the Windows 7 installation, I had to hard reset my Mac Pro and tried to reboot back into Mac OS X Lion and that's when the nightmare begin.
Not only I could not boot into OS X, I could not use any of the startup key combinations (i.e. Hold option key to select start up disk, option + R to boot the lion recovery drive, not boot from any external firewire drive installed with OS X Lion). Basically none of the key combinations worked except for the holdingi F12 and mouse key to eject CD.
The only thing I could boot the Mac Pro with is the windows installation CD and Linux Ubuntu Raring Distro. I can install the ubuntu distro without any issue. However, I could not boot my mac pro back into OS X as Linux does not support bootcamp. The only way I could use Mac OS X Lion again is to delete the partition OS X Lion was installed on, and then I was be able to install Windows 7 without any issue.
After installing windows 7 I would have to download boot camp and then use the boot camp control panel to restart in the Mac Pro installation DVD and I will have to reinstall OS X again. After installing OS X, I went to System Preference and tried to select Windows 7 as startup disc. But I failed to as it says "Windows 7" Was installed via another utility. I would have to erase the partition and reinstall Windows 7 again using bootcamp utility. If I try to install windows 7 again, the horror I described above repeats again.
From my understanding, the Boot camp utility creates a new EFI bootrom with Master Boot Record (MBR) in FAT32 format. Therefore I could not boot back into Mac OS X without using boot camp in windows 7 as none of the boot combinations key worked.
I want to ask if anyone is experiencing the same issue as i do, and if there are any solutions to the problem I am experiencing. I never had such issue before. I was able to install Windows 7 on my 2ndary internal hard drive without issue using boot camp. I don't what has changed. I have googled for solution, I only found something related to XOM but nothing else.
If anyone can provide me with any help in regards to installing Windows 7 as a whole partition on a secondary internal hard drive. It'd be grealy appreciated. Thank you in advance.

If you have driver issue, just pre-download the boot camp drivers and save them on an external drive or burn them onto a cd, you will be able to load drivers via the advanced installation option during windows setup, that is if your osx partition isn't actively preventing you from installing win7 on the BOOTCAMP Partition created by boot camp assistant, I find this rather ironic, took me 3 days to figure out this issue, I was stuck without being able to boot into anything beside the windows cd, which wasn't even helpful as I could not install windows as I did not want to delete my osx partition. I lost all my data becsuse of it, as I had no idea what was going on. I tried to recover the partition using testdisk, hfsprogs and gparted in ubuntu life cd but they dont support HFS+. As I could not access osx terminal (couldn't even boot into osx installation dvd with that dreaded MBR created by boot csmp). I could not use pdisk in terminal to restore the osx partition map. Though luck for me. Called applecare and they had no idea what the problem was, and as usual they orgsnised for hard drive replacement. But it was clearly a software issue.
They will have to fix bay2 for me as I can no longer detect any hard disk connected to that bay.

Installing Windows PE to Boot From A Removable Drive

Similar Messages

Maybe you are looking for