Installing Windows Server 2012 RC Remote Desktop (ISSUE)

Installing the RD Host Service doesn't work and I get several errors. Any Hints?

You cannot be serious. I approached your Microsoft "Gold certified" software partner 'Cancom Germany' with the following requirement:
- Need a Windows 2012 "Terminal Server"
- for 15 client devices
- currently no AD or other Windows servers installed
What do I get sold:
- Windows Server 2012
- 15 Device CALs
- 15 RDS device CALs
and the information that I need to setup AD and the RDS roles. So far so good.But I run into these error messages when setting up the RDS roles.
Now you are telling me that I need another server running just for the AD? Which I do not need for anything except for the internal requirement of the RDS services?
Please elaborate a bit more on the way to get it work on the same machine or suggest another solution (btw buying another license for the AD server is not a solution).
Totally agree with you. buying extra server just for AD or broker frustrated me. but I found a patch here
http://support.microsoft.com/kb/2799605
I don't know if it is too late, but hope it can help others

Similar Messages

Does Windows Server 2012 support Remote Desktop Client 6.1?

Hi,
Does Windows Server 2012 support Remote Desktop Client 6.1? IU can't find a link anywhere on the Microsoft site to confirm this!
Thanks,
Jim

this should help you
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b664ddaf-6c11-49e2-8a69-0df3b8ef13a1/server-2012r2-rds-farm-with-xp-and-windows-vista-clients?forum=winserverTS

Windows Server 2012 Standard - Remote Desktop Management service won't start

Dear colleges, I'm seeking your help in resolving a weird issue with Remote Desktop.
The Remote Desktop Management service gives the following error message any time it is attempted to start:
"The Remote Management Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
The Event Viewer error message is as follows:
"The Remote Desktop Management service failed to start. Error code: 0x88250001"
Whenever I connect to the server with RD I get error message that the Remote Desktop Licensing Server isn't configured and that the RD trill will expire in N-days. The server is up to date updates wise and has been licensed for 5 RD CALs. The server hosts DNS
server and has AD DS role installed, is virtualized to have one Hyper-V server.
I read some blogs about having both DNS and AD DS on one box is a bad sea and a root cause of the issue. Well, that very well may be, but for me that's an option as I'm not going to get a box to just host DNS. There should a solution to this as I shouldn't
only one suffering from this issue.
I also read about KB2871777 - Servicing stack update supposedly addressign this issue. Well, it's on my system and the issue is there too. :)
Will I loose ability to RD when the trial expires or it's just another misleading MS message that can be ignored?
How do I mend Remote Desktop Management service to start?
Appreciate your help!

Hi,
Thank you for posting in Windows Server forum.
Can administrators perfectly connect to RDS environment?
In meantime please check that you have properly configured and activated RD License role service and install RDS CAL on it. It might also possible that you have configured RD License server but it server can’t find it and giving you error due to certificate
also. Please check that you have properly configured certificate on your RDS Server. Try to install and update below hotfix for License related issue.
No RDS license when you connect to an RDS farm in Windows Server 2012
http://support.microsoft.com/kb/2916846
If you have configured both RDS and AD DS on single server then also you may find some error reading this. If so please try to setup both roles on different server and check the result. In addition to this, please check below articles.
What's New in Remote Desktop Services in Windows Server 2012
http://technet.microsoft.com/en-in/library/hh831527.aspx
Install Remote Desktop Services Failed on Windows 2012 Server
http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbf47aa2-8ae5-4f22-9827-afee5a11417a/install-remote-desktop-services-failed-on-windows-2012-server?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Logging into Windows Server 2012 from Remote Desktop requires "Connect with Smart Card"; how do I disable this?

I am using pretty much the default setup. I cannot figure out how to disable this. I do not want to use smart cards.
Any ideas?

Does this mean you're trying to RDP from an XP box, therfore have the Remote Desktop feature on the server set to "less secure"? Sounds like thats what disables network authentication, prompting the Smart Card request.
If you simply click to login as a different user, you can login without a smart card, to include the same user as was being prompted for the card.
I expect if you choose the Remote Desktop feature requires network authentication on the server, the smart card requirement goes away, but you'll need to login from Win7 or newer clients. Not sure where Vista falls, probably okay too.

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.

Install sharepoint 2013 on Windows server 2012, Microsoft Identity Extensions issue !!!!!!!!!

Sharepoint 2013 comes with prerequisitesinstaller.exe to install the software required for the actual Sharepoint installation.
I 've installed Windows server 2012 in the R2 edition as well as Standard edition, but installing the prerequisites ends with an issue for the Microsoft Identity Extensions (MIE) on both versions (screenshot).
The 2012 R2 server has been updated with all latest files by executing Windows update.
In case of the Server 2012 R2, MIE is already installed , but somehow the Sharepoint installation is missing something.
I al;so tried removing default install to let prerequisiteinstaller.exe to install it's own version, but that did not help.
When I skip the prerequisites remaining items, the Sharepoint installation stops directly , requesting the missing items.
I've tried several Sharepoint server installation files, including the 180 days free version.
Screenshots will be uploaded after my account has been checked......

Hi Jay,
Installing SharePoint Server 2013 on a computer that is running Windows Server 2012 R2 could lead to unexpected behavior, therefore, Microsoft does not support SharePoint Server 2013 in Windows Server 2012 R2.
SharePoint Server 2013 with Service Pack 1 and SharePoint Foundation 2013 with Service Pack 1 will offer support for Windows Server 2012 R2.
Refer to:
SharePoint 2013 Support for Windows Server 2012 R2
In addition, as Dave suggested, for the sharepoint server issue, please post in the dedicated forum for a better response.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Failed to install windows server 2012 in virtual machine hosted in window 8.1

I installed Hyper-V in windows 8.1, then when I tried to install windows server 2012 R2 or windows server 2008 R2 in virtual machine, I got the following error:
the following is my virtual machine setting:
is there anyone an help to resolve it? thank you very much.

Hi,
Good to hear that you have solved this issue. Thanks for sharing as it would be helpful to anyone who encounters similar issues.
Best regards,
Susie

Installing Windows Server 2012 in Order to Use SharePoint Server and Develop in VS2012

Hi.
I need to install SharePoint Server so that I can work with SP Designer and have full options for development using VS2012. Apparently, I also need to Install Windows Server 2012. I would like to install and configure WS2012 in a virtual environment
using the Hyper-V tools that come with Windows 8 Pro. I'm a newbie when it comes to WS2012, and want to make sure I don't end up reformatting my Windows 8 hard drive or causing a similar event that would put me in a rubber room.
I downloaded the WS2012 image file, but am unsure how to proceed. Can anyone give me some help as to how to get started?
Thanks.
Bugless

Hi,
If you have enabled the Hyper-V role on Windows 8 then you can create Windows Server 2012 VM's. As Server 2012 has the Hyper-V tools build in by default there is no need to install them.
So enable the Hyper-V role on Windows, Create a new VM in Hyper-V management console and connect the cd/dvd drive in the VM properties to the Windows Server 2012 setup ISO file. Start the VM and the Server 2012 setup. (during creating a VM you can also
connect the cd/dvd drive to an ISO file)
You might want to give to the Server 2012 VM 2 vCPU's and 2GB+ memory for performance. Also have a look the memory specs for VS2012 to see how much memory you should give to the VM.
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer
MCSE:Server Infrastructure, MCSE:Desktop Infrastructure, MCSA Server 2012, Citrix CCIA & CCEE, Cisco CCNA, VMware VCP 3/4/5 Blog: http://www.citrix-guru.com and http://www.rds-support.eu Twitter: @dnyvandam

Network Connection error when Trying to Install Windows Server 2012 R2 Essentials

Thank you to anyone who can help me out here. I have a brand new machine with known working wifi and wired ethernet adapters (works under Windows 8.1) I am attempting to install Windows Server 2012 Essentials R2. During the install process, the system connects
to the internet to download updates to help along the install. No problem here. Further down the road after restarting several times and now during the "Configuring Windows Server Essentials" step of the install, I am told "There is no network
connection. Please fix the connection issue and try again."
When troubleshooting the connection, I am told that the wifi adapter drivers may not be installed. I have a wireless card in the machine and have also tried disabling the wifi adapter and have been connected successfully via the ethernet port this whole
time.
Help, I'm stuck and have been to this point in the install 4-5 times already.
Thank you.

Is this a laptop? Can you remove the wifi? Disable it in BIOS?
Does the wifi have an IP and internet when it throws the error?
BTW, when the wizard ask about updates say no. Takes way too long and does not help anything
Change the binding order and put the wired on top.
The Steps?
Just open your Network and Sharing Center. (Change adapter settings)
Press an ALTkey on your keyboard to show the menu bar.
Click on the Advancedmenu
choose Advanced Settings option
Adjust your binding order for your NICs to ensure your wired ones are at the TOP
http://regularitguy.com/2012/12/06/how-to-change-nic-binding-order-in-windows-8-and-windows-server-2012/
Grey

Unable to Install Windows Server 2012 R2; system aborts and reboots after first blue Windows logo appears

System: Dell PowerEdge sc1420 with dual xeon and Adaptec 2420SA SATA RAID (supported by OS); 10 GB memory (2x4, rank 2, organization x4, in DIMM1 & DIMM2; 2x1, registered, organization x8, in DIMM3 & DIMM4)
This computer is currently running Windows Server 2008 R2 Enterprise which was installed with no problems.
Objective: clean install of Windows Server 2012 R2 Standard on an otherwise unused RAID array disk set.
All attempts to boot from DVD result in loading of files (grey progress bar on bottom of screen), brief dark screen, then black screen with a blue windows logo for about 2 seconds and then a flash of about 10 lines of error notifications on a black screen
for about 1/4 second (unreadable), and then a reboot of the computer.
Coreinfo.exe confirms that cpus DO support NX and PAE; do NOT support VMX (virtual machine enhancements).
Attempts to run memtest.exe from boot disk tool-menu startup result in an error message that the memtest.exe file is corrupt.
Running memtest.exe from Windows 2008 R2 install disk results in all memory tests passed!
Attempted booting with multiple DVD's (some +R, some -R, all verified) burned from .iso. These DVD's were used successfully to install Windows Server 2012 R2 on an HP Pavilion. Also changed DVD drives just to rule out DVD hardware.
Running CHKDSK from Windows 2012 R2 on HP Pavilion shows no problems; running CHKDSK from Windows 2008 R2 on the Dell system on the same disks shows some problems. Running checkdisk on the Windows 2008 R2 install disk from the Windows 2008 R2 installed
system shows no problems. All disks burned and verified on same system.
Also attempted to boot from USB thumbdrive with copy of DVD on it. Same results: system loads files then reboots at first Windows logo. So that would rule out disk quality issues per se??
Started to try an upgrade rather clean install to see if any errors were announced. None were announced as the system went through much of the process. I aborted somewhere along the way before committing to the upgrade because 1) the most likely
outcome was it would not boot after install (I don't really need the practice in restoring); and 2) even if it did reboot, having a system that can't be repaired by booting the install disk is pointless.
All disks and raid arrays are recognized and usable by RAID controller card and by Windows Server 2008 R2. Disks are within spec for use with Adaptec 2420SA (1TB @ 300).
Is VMX (aka VT-x) actaully required for ANY install even though Hyper-V is not intended to be used? If so, it is too bad that the Microsoft system requirements (
http://technet.microsoft.com/en-us/library/dn303418.aspx ) don't make that clear. And lack of VMX support really doesn't explain the memtest.exe "corruption" issue.
Or is it maybe something unique about the files on 2012 R2 disk (or disk image on USB) that are causing some problem with the chipset processing? But why?
My vote would be for the latter of the issues, but I have no clue why or if it is remediable. Suggestions?

So here is what I think is the final understanding of this problem:
First, one additional piece of important information: The computer successfully moves into and through the Windows Boot Loader phase and succeeding phase ONLY for Windows 8.1 32-bit, but NOT for Windows 8.1 64-bit nor for Windows
Server 2012 R2 (only 64-bit).
The Windows Boot Manager phase (which precedes the Windows Boot Loader phase) is either 32-bit or 64-bit (64 –bit for this case) and is loaded by the 16-bit stub program (Bootmgr) which starts in real mode.
Windows Boot Loader of course runs in either 32-bit or 64-bit (64 –bit for this case) according to the product being installed.
By inference, the essential problem is occurring in conjunction with the loading of a WIM file to start the Windows Boot Manager.
The boot manager starts ok and generally shows its essential screens (Windows Boot Manager; Advanced Boot Options) or proceeds to load files for transition into Windows startup in the succeeding Windows Boot Loader phase (that doesn’t “boot” but rather
loads the system). This is best confirmed by the announced corruption of the memtest.exe file when selecting Windows Memory Diagnostic from the Windows Boot Manager Screen.
If allowed to continue loading files to pass control to the Windows Boot Manager, the type of abort and resulting immediate restart that occurs is that which you would associate with unhandled cpu exceptions (invalid instruction, memory out of range,
wild interrupt, etc.) that most of us have not commonly seen for 20 years (since beginning to use well behave OS’s from Windows NT 3.1 and on).
So, the problem obviously is due to a failure to properly mount the WIM file and/or properly access it (probably the latter) when running in 64-bit protected mode.
This is independent of the hardware on which the install disk is actually mounted (DVD or USB-flash), so it is NOT a hardware problem
per se.
Since the WIM is mounted early in the process, Boot Manager may well have loaded it using BIOS routines to access the physical device on which it resides rather than loading 32-bit or 64-bit drivers of its own.
Hence, if the BIOS does not “mount” the WIM in a way that is later fully compatible with access from the 64-bit systems being loaded, it could cause apparent file corruption.
If it is only partially incompatible some functionality may appear quite usable (like loading files) until later detected.
This is vague on my part, because the exact nature of the incompatibility cannot be readily determined from the information available.
But the consequence is the same: the system cannot boot from the install disk, either for initial installation or repairs.
Incidental conclusion: The 64-bit boot manager code for Windows Server 2008 does not exhibit this faulty behavior, but the 64-bit code for Windows Server 2012 does.
So the problem is not inherent with loading 64-bit server OS’s.
Expectations: If the system were to be upgraded using the features of the install disk while running an installed OS, say Windows Server 2008 R2, it might well succeed and yield a fully functional system upgraded to Windows Server 2012
R2 (because the installed operating system is started from discrete files, not from a WIM file).
However, in order to perform a disaster recovery using Windows resources (such as image backups from Windows Server Backup), one would have to presumably boot from a Windows Server 2012 64-bit install disk or Windows Server USB recovery drive.
Of course we know that the Windows Server install disk will not boot and we can be fairly sure that the problem will migrate to any Windows Server USB recovery drive that is created.
My inspection of a Windows 7 System Repair CD shows that is based exclusively on boot.wim, not discrete files!
Of course a generated image for a WIM for Windows 2012 USB recovery drive
might not have the flaw that drives this behavior, but it probably would.
Problem conclusion: A BIOS upgrade would be required for compatibility with Windows Server 2014 clean installation
and any maintenance; and none is available from the OEM.
Problem not resolved, but understood for future reference.
Thanks to Tim whose comments helped me focus my thinking.

Installing Windows Server 2012 on W510

I realize this is not likely to be a common scenario, nor a supported one. I'm installing Windows Server 2012 (Evaluation edition) on a w510 to use as a learning lab. In case anyone else decides to head down this road I've documented what I've run into so far.
System: Thinkpad W510 43192NU
Upgrades: 16GB RAM, Crucial M4 256GB SSD.
The basic install happened quickly and easily, but as expected there are a couple of driver issues.
Installed Windows Server 2012 Standard 180-day EVAL from DVD (ISO obtained from Technet 10/15/2012)
Installed available Windows Updates (only 2 as of October 25, 2012)
Installed Lenovo nVidia discrete video driver for W510 Windows 8 64bit
(getting braver here)
Installed Thinkvantage System Update 5.0 for Windows 8 64bit
Ran System Update and it found 3 available items:
Intel Management Engine Interface 6.2 and Serial Over LAN (SOL) driver downloaded and installed
Audio Driver for Windows 8 32/864 <--SIC Downloaded and installed
ThinkVantage Active Protection System (64bit) <-- did not download / unsuccessful
At this point there are also 3 items still listed under "Other Items" in device manager:
Looked up device IDs in Properties, ran through driveridentifier.com:
Base System Device (I think its the Ricoh Mulit-Card Reader)
Device Name:
Base System Device
Hardware ID
PCI\VEN_1180&DEV_E230&SUBSYS_213417AA&REV_01
PCI\VEN_1180&DEV_E230&SUBSYS_213417AA
PCI\VEN_1180&DEV_E230&CC_088000
PCI\VEN_1180&DEV_E230&CC_0880
Compatible ID:
PCI\VEN_1180&DEV_E230&REV_01
PCI\VEN_1180&DEV_E230 <---- Device ID matches with our database
PCI\VEN_1180&CC_088000
PCI\VEN_1180&CC_0880
PCI\VEN_1180
PCI\CC_088000
PCI\CC_0880
Current Status: Detected and installed using the Windows 7 driver from Lenovo
Broadcom Bluetooth Device
Device Name:
ThinkPad Bluetooth 2.1 with Enhanced Data Rate II
Hardware ID
USB\VID_0A5C&PID_217F&REV_0360
USB\VID_0A5C&PID_217F <---- Device ID matches with our database
Compatible ID:
USB\MS_COMP_BLUTUTH&MS_SUBCOMP_1112EDR
USB\MS_COMP_BLUTUTH
USB\CLASS_E0&SUBCLASS_01&PROT_01
USB\CLASS_E0&SUBCLASS_01
USB\CLASS_E0
Current Status: Unresolved. Windows 7 driver failed, OS complained about compatibility issues.
Unknown Device <-- That is how its listed under device manager
Device Name:
ThinkPad PM Device
Hardware ID
ACPI\VEN_IBM&DEV_0068
ACPI\IBM0068
*IBM0068 <---- Device ID matches with our database
Compatible ID:
Version
1.43.0.0,2007-05-31
Current Status: Unresolved. Installed Windows 8 Lenovo Power Management driver without errors but did not fix. Item still listed under "Other device"
At this point I have it where I need it to be. All I want to do is have a stable basic install so I can install Hyper-V and play around with a bunch of VMs. For that I don't really need Bluetooth or enhance power management.

Camarones wrote:
Have you found a solution to the driver issues I mentioned?
I had no issue installing the Windows 7 x64 power management driver and Power Manager. Just keep in mind it is only for control of the CPU clock speed and a few other settings. With Hyper-V installed, you lose sleep/hibernate and resume.
Bluetooth won't work
I never had a use for multcard.
With Windows Server 2012 be happy you have networking and a video driver which are the core things you need. If you want a full on workstation, move to Windows 8 Pro and Hyper-V.

Install Windows server 2012 using powershell

Hi Folks,
How to Install Windows server 2012 using powershell.
Thanks,

Hi,
According to your post, my understanding is that you want to install Windows server 2012 via PowerShell.
Per the previous thread, we could not install Windows server 2012 directly via PowerShell.
https://social.technet.microsoft.com/Forums/en-US/53f82989-4b9c-4197-9ff1-03e96c852eb7/how-to-install-windows-server-2012-directly-in-vhd-file-using-powershell?forum=winserver8setup
As this is the forum for SharePoint server on-premise, I’m not familiar with the Windows server, for this issue, I recommend you can post a new question in the forum for Windows server.
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserver8setup
More experts will assist you, then you will get more information relation to Windows server.
Thank you for your understanding and support.
More reference:
http://vegibit.com/install-and-configure-windows-server-2012-with-windows-powershell/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Cannot install Windows Server 2012 R2

Hi
I've been able to install Windows Server 2012 standard on a VMWare ESXi 5.1 host.
I've noticed our license was a Windows Server 2012 R2 standard, so I went on eOpen and download the appropriate software.
Now when I try to install it, I get a Windows Boot Manager error
Fiile: \windows\system32\boot\winload.exe
Status: 0xc0000001
Info: The application or operating system couldn't de loaded because a required file is missing or contains errors
Printscreen:
Any help is appreciated. Thanks,
Martin

ok I'm downloading 9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_EN-US-IR3_SSS_X64FREE_EN-US_DV9.ISO
Will give it a try and post back the result here.
Martin

Can I install Windows Server 2012 r2 essentials over Windows 7 Pro

I have new hardware that came with windows 7 pre-installed. It meets and exceeds hardware requirements. Can i install Windows Server 2012 R2 Essentials on this machine. What is the procedure? Any help would be grateful.
Thanks
Woodrow

Hi.
I agree with Milos on this; if you want to install Windows Server 2012 Essentials on a machine which suppose to use Windows 7, I would use it solely for test purposes.
Could you tell us what the computer specifications are???
For anything more serious (and I can see that you want to use this machine for accounting software), I would suggest purchasing a server machine.
However, if you really really want this machine to be Windows Server 2012 Essentials, check this article on technet:
Install and Configure Windows Server 2012 Essentials
How to wipe out HDD
P.S. As Milosh sugested, please do a backup first
Backup your system, programs, and files
Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights.

How to install Windows Server 2012?

I am trying to install Windows Server 2012 on one of my computers and make it the OP but every time I try to download it from
http://technet.microsoft.com/en-gb/evalcenter/hh670538.aspx
And when I put get started it always asked me for my company and I don't have one. I want to use this for personal use. So is there a way I can download it or is it not possible. If it is please direct me to where I can find it.

You can download the evaluation here.
http://technet.microsoft.com/en-us/evalcenter/dn205286.aspx
Not sure what your asking but type in Acme (or anything else) if prompted for company info.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Installing Windows Server 2012 RC Remote Desktop (ISSUE)

Similar Messages

Maybe you are looking for