Installing windows xp on boot camp and parallels??

Hi all,
I am using a Macbook with a 2GHz Intel Core 2 Duo with 4GB of memory on Mac OS X 10.5.8. I currently have Parallels 5 installed running Windows XP. I need to run Windows off of Boot camp according to the support from the program I am trying to run "Chief Architect X3" as I need to utilize the video card "natively" I believe the word was. Parallels is unable to recognize and use the card properly for this program. So my question is two fold does anyone know if there is a patch that allows Parallels do this? Or can I install Boot Camp on my machine as well with Windows XP so that I can utilize the video card for this program. Do I need to uninstall my Parallels virtual machine? Also programs that are installed via Windows, if I install Boot Camp/Windows and delete my virtual machine/Windows do I need to reinstall those programs? Any and all information is GREATLY appreciated!
Thanks in advance,
Laura

Upgrade to Parallels 6, new build just out. And ask on their forum.
You have to install XP natively first and then enable under a VM to activate properly.
Everything will need to be installed. there are few ways to get a VM to a "native" hard drive partition. And Windows activation is another issue.

Similar Messages

Installed windows 7 with Boot camp and now cannot get back to OS x x

Have installed Windows 7 with Boot Camp on a 20" 2006 iMac running X 6.8. Now cannot get back to original OS. Tried Snow Leopard in drive and holding c and various other keys at start up but still Windows. Any ideas?

Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the disk icon for OS X.
5. Click on the arrow button below the icon.

Loading Windows XP on Boot Camp and Parallels

Hi,
I am trying to load windows XP on to a new 27 inch iMac I just purchased. Upon visiting an apple store the other day, I spoke to someone who told me I could put Windows XP on the iMac using Boot Camp and also use Parallels so that I could run Windows XP at the same time as OS X.
My objective is to be able to run windows XP at the same time as OS X (Parallels does this very well) and also have the option to just run Windows XP if I need the full power of the computer for some memory intensive PC applications.
So I was told that if I first loaded Windows XP on to the computer using Boot Camp I could then load Parallels on to it and access windows from OS X (the way you can with parallels.
Is there anyone who understands what I'm saying/ done this before/ have any insight at all?
Cheers,
Ed

Have a look at this link it should help
http://cnettv.cnet.com/run-windows-inside-mac-os-x/9742-1_53-50002415.html

How to install windows 7 using boot camp and usb drive?

Hey,
I wanted to install windows 7 on my mac 10.6.4 and I only have windows 7 in a external hdd, so what can i do so i can install?
Thanks in advance
Ala.

He's implying you can't. You need your original install DVD to install it on your Mac, just as you would if you were to install it on a PC.

Installing Windows 7 RC1 with Boot Camp AND Parallels?

I have a 24" iMac (2009 model) and have successfully installing Windows 7 RC1 using Boot Camp. No problems at all and everything is working fine. But now I'm contemplating purchasing Parallels and using Windows 7 in a window.
I just need to know the steps involved and how this works. First I purchase and install Parallels. Then I run it and somehow tell it to use my Boot Camp partition for the VM, right? In this way, I'm assuming I don't actually have to install Windows 7 again or make another partition, right? Once I get the VM installed, then I can either boot to Windows 7 from startup OR boot from within Mac OS using Parallels and it would be the same?
If I can do it this way, can anyone point me to step-by-step instructions on how to choose the right settings in Parallels? I have found instructions for installing Windows 7 using Boot Camp and Parallels separately, but not how to use the Boot Camp install for the VM in Parallels.

Wow, it was much easier than I thought it would be! Downloaded the trial of Parallels. Installed it and pointed it to my Boot Camp partition with Windows 7 installed on it. And minutes later, I'm up and running with Windows 7 in Parallels. Sound didn't work at first, but after I did a Windows Update, it installed the correct driver and now everything is working great. I can't believe how smooth this thing runs within Leopard. I allocated 1GB of RAM for WIndows 7 and it's seems fine so far, but I really haven't run any resource-intensive apps yet.

Time Machine stuck at "Looking for backup disk" after installing Windows 8 via Boot Camp

I've been backing up via Time Machine to an external USB drive and it's been working fine. I recenty installed Windows 8 via Boot Camp and now TM gets stuck forever at "Looking for backup disk...".
I've tried the following, to no avail:
Using "Select Disk" in TM preferences to re-select the disk
Deleting /Library/Preferences/com.apple.TimeMachine.plist
Running system maintenance via Onyx
Resetting PRAM
Formatting the drive and setting it up for TM backups again
The Boot Camp partition is on the same drive as OS X (on a 180GB Intel 330 series SSD). During the Windows installation I re-formatted the partition as NTFS.
If I start OS X in Safe Boot mode, TM backups work. In Safe Boot mode, the NTFS partition isn't loaded so I suspect it has something to do with this. Any ideas would be greatly appreciated.

I installed Paragon NTFS for Mac and it started working all of a sudden.

I tried installing Windows 7 using Boot Camp, but it didn't work, I don't know how to "unparticion" the memory I gave to Boot Camp, and Boot Camp "vanished", help...

I tried installing Windows 7 using Boot Camp, but it didn't work.
Although it didn't work, the memory is still divided. So I looked for Boot Camp in aplications, but it literally vanished...
So I tried downloading it again, but I only found EXE files... they don't work on my MacBook Pro...
It's very new... Bought it recently...
Please... I need help to unparticion memory back to original Mac HD and install Boot Camp...
Thanks...

Below is the paragraph from the instructions. Follow it exactly and then report what happens at each stage.
How you remove Windows from your computer depends on whether you installed
Windows on a second disk partition or on a single-volume disk.
If you installed Windows on a second disk partition: Using Boot Camp Assistant as
described below, remove Windows by deleting the Windows partition and restoring
the disk to a single-partition Mac OS X volume.
If your computer has multiple disks and you installed Windows on a disk that has only one
partition: Start up in Mac OS X and use Disk Utility, in the Utilities folder, to reformat it
as a Mac OS X volume.
To delete Windows and the Windows partition:
1 Start up in Mac OS X.
2 Quit all open applications and log out any other users on your computer.
3 Open Boot Camp Assistant.
4 Select “Remove Windows 7,” and then click Continue.
5 Do one of the following:
a If your computer has a single internal disk, click Restore.
b If your computer has multiple internal disks, select the disk with Windows on it,
and then select “Restore to a single Mac OS partition” and click Continue.

I have macbook pro 13.3 inch. I am installing window 7 in boot camp manager after copying file of window upto 67% it doesn't response and i had forcely shotdown my macbook. Now my macbook doesn't open and stop in black screen with cursor blinking.

i have macbook pro 13.3 inch. I am installing window 7 in boot camp manager after copying file of window upto 67% it doesn't response and i had forcely shotdown my macbook. Now my macbook doesn't open and stop in black screen with cursor blinking. Now how could i open my macbook pro.

At startup hold down the Option/Alt key and from the screen that comes up select your OS X partition to start the computer from. Then use the Boot Camp Assistant app to Remove Windows and the partition you reated for it and it will Automatically place the space you allocated for the Windows install back into the OS X partition.
NOTE:
Do NOT use Disk Utility to erase the partition that was created for the Windows install. Use the Boot Camp Assistant app again to do that.

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

I have installed Windows 7 using Boot Camp on Macbook Pro OSX 10.9.3, I'm not able to connect to wireless and its not showing as well in network sharing. Please help

I have installed Windows 7 using Boot Camp on Macbook Pro OSX 10.9.3, I'm not able to connect to wireless and its not showing as well in network sharing. Please help

Hello Bhagyeshree
Check out the articles below to troubleshoot issues with connecting to Wi-Fi. Start with creating a new Network Location and then search for a Wi-Fi network and if that does not work, then go through second article to troubleshoot the issue further.
OS X Mavericks: Add a network location
http://support.apple.com/kb/PH13788
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
-Norm G.

After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key. However, disk still in reader, and not using a Mac keyboard

After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key. However, disk still in reader, and not using a Mac keyboard

Reboot your Mac, as soon as you hear the chime press the option/alt key and hold it until the boot manager appears, select OSX to boot from.

Installing Windows 7 in Boot Camp with iso

I have downloaded an .iso file with Windows 7 on but I can't install it in Boot Camp. I've tried several things with no luck.
1. For the first, when I start up Boot Camp assistant I can't choose to "Create a Windows 7 install disk". I only have the two bottom options, the one for downloading support software and the one for installing windows 7. So I can't use my .iso file there.
2. I tried to burn a bootable dvd with the .iso file. I burned it on a Windows PC since my superdrive won't burn on the discs I've got (DVD+R). The disc works properly on the Windows PC but when i mount it in my Macbook I only get a popup that says I've put in a blank disc and some options of what I wan't to do next.
3. I tried to make a bootable flash drive and that pops up in finder, but the Boot Camp assistant won't recognize it and says I have to put in a Windows 7 install disc.
4. I also tried to open the image file in disc utility, but the result is the same as if I'm trying with a flash drive.
I'm out of ideas now so it would be nice if someone else knew any other possibilites to install Windows 7 in Boot Camp.
Or maybe there is an solution for the things I've alleready tried?
I'm using a MacBook Pro late 2008

Does it boot off the internal?
Is the external a full copy of your working system?> whew! then you can always wipe it clean and start over.
As long as the partition was created properly.... though 50GB can work it can also be slim fit in the end.
Under the worst condition - and the Mini is one of the worst, too - two minutes maybe to restart.
External because there never was an internal DVD player?
zap pram.
did you buy DVD or burn DVD? if burned, then that is likely cultprit Redo at slowest burn speed (2x) with verify.
Heck, even Windows 7 SP1 has been implicated on some were pre-SP1 worked.
For a test, there is Windows 8 RP for free. And Parallels 7 will set up a VM for you with the whole download and inistall. Not everyone needs to run natively.

How do I install Windows XP with boot camp assistant, on my IMac?

How do I install Windows XP with boot camp assistant, on my IMac?

Lion cannot BootCamp XP.
You can install XP under virtual machine software (Parallels, VM Fusion, VirtualBox).
And Windows 7 Pro has XP mode. XP will requires probably days of pathing after install and will be completely unsupported by MS within 1 year, but Windows 7 Pro still has great support from MS.

About Boot Camp and Parallels

Can I use the Windows Xp that I installed by Boot Camp for Parallels?
In the other hand, Do I need a Windows installation for Boot Camp and other for Parallels?
Thanks in advance.

But note that you will need to reactivate Windows when you run it under Parallels for the first time. For this reactivation you will probably need to call Microsoft.

Mac Notebook - Install Windows 7 with Boot Camp

The DVD drive is broken so I am not able to install Windows 7 using boot camp. I created a few bootable Windows 7 USB drives and while the Mac is reading the drive, when I attempt have boot camp use this flash drive to install Windows 7, it keeps giving me an error that the Windows 7 CD is not in the DVD drive. It's looking for the Windows 7 installation CD in the DVD drive.
How do I get around this? I think I created the bootable USB drvie with Windows 7 correctly but it's still not working. Are there other workarounds I can do such as download the ISO file to the Mac's desktop and use boot camp to install Windows?
Thanks.

You didn't mention which OS X version you have. Not every Mac or every version of OS X or every version of Boot Camp supports installing every version of Windows from an ISO image.
Boot Camp 5.1: Frequently asked questions - Apple Support
Depending upon the age and parts availability of your Mac, it might be less expensive to have it repaired, or to purchase an external DVD drive. No guarantee that Boot Camp will 'see' the external DVD, with the internal DVD still connected, however.
If Boot Camp on your Mac does not support an ISO image, and your Mac DOES support the minimum requirements to run a recent version of Parallels (7 or newer), Parallels is capable of installing a Windows virtual machine from a Windows ISO image. Windows performance under Boot Camp is likely much better than Windows running as a virtual machine under Parallels and OS X. The most recent version of Parallels is always available for a short-duration free trial: http://www.parallels.com You still need a valid Windows license to complete even a trial installation. Older versions of Parallels (prior to version 9) will not run under OS X 10.10 Yosemite. Parallels needs to be set to look for the correct ISO image location, rather than a DVD.

Installing windows xp on boot camp and parallels??

Similar Messages

Maybe you are looking for