Installing Windows XP on E10-30 netbook

Hi all,
I just bought a Lenovo E10-30 netbook. I need to install Windows XP on it. I get the following message:
A problem has been detected and Windows has been shut down to prevent damage to you computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Tecknical information:
*** STOP: 0x0000007E (0x0000005, ... )
*** acpi.sys - Address F73D2452 base at ...
Any help is appreciated.
Solved!
Go to Solution.

> Each machines recovery will work on other models that are the same.
That is good news. What about the product key? When you create the recovery using "Create Recovery Drive" from within Windows 8.1 in one machine and then use this recovery to recover to another machine, won't there be two machines having the same product key? If this is the case, is it a problem?
> Do you still have the recovery partition or did you erase it?
OpenBSD that I tried to install, erased all partitions. That is why my recovery, created using "One Key Recovery" from within Windows 8.1, didn't work.

Similar Messages

S10e -- Can I install Windows XP onto my Linux-Netbook and same way Linux on Windows Netbook?

Hello all,
I wanna buy a S10e and I still have one question:
Can I install Windows XP onto my Linux-Netbook and same way Linux on my Windows Netbook?
I wanna use Suse for all my net applications and still wanna Windows for just old games running on a long trip as flights ect..
Is it possible? Install booth?
Thanks
Message Edited by ykin on 01-24-2009 12:43 PM

Boot Camp will only let you install onto an internal disk. This is largely because of Windows restrictions, not Mac OS restrictions. The beta thread has some supposed approaches to let you do this, using manual steps instead of using Boot Camp Assistant.
Doug

HELP! sata 3 ssd for hp mini 110-3118cl netbook, but i can't install windows xp on it.

Greetings, I recently bought an ocztech sata III ssd for my hp mini 110-3118cl but I can't install windows xp on it. I have the xp sp3 install version with SATA drivers pre-packed. When the setup goes through the first re-start, it stops, shuts down and re-starts. It also displayed an error at the beggining signaling something missing
SSd's are very expensive and i exclusively want XP, not 7. Any help?
hp mini 110-3118cl
windows xp 32-bit

Hi:
It is possible that the NM10 ACHI drivers are not part of that package though.
Please read this guide for slipstreaming drivers into a copy of your installation disk and see if that works.
http://www.mediafire.com/?z41dc9tyx4jyyys
Paul

[TUTORIAL] GE70 2OE Installing Windows 7 (OS CHANGE)

Hello Forum,
Here is my very first post on this forum... but I wanted to share my experience with switching OS on the new GE70 2OE-015NL (as the product name says, I'm from The Netherlands )
I bought my GE70 and immidiately wanted to switch my OS to Windows 7... I owned a Dell Vostro 1700 Series and OS switches were never a problem on that notebook... as soon as i started with the OS change I ran into some problems that were difficult for me to fix (I'm not an expert) There were almost no tutorials to find about this, but I managed to fix it!
Before I figured out what to do, I called MSI Support so they could tell me if I could safely remove the BIOS_RVY partition etc. but as soon as I got someone on the phone and I told him that I already deleted the Windows 8 partitions and didn't get Windows 7 to install he began shouting that MSI doesn't support OS changes and that I had to send an email to their tech support so they could decide later on if they would help me or not.... I didn't ask for anything, I only wanted to know if I fkd up my new Notebook or that it would be repairable... a BIG for the MSI Tech Support! After I called I immidiately googled if it was safe to delete the BIOS_RVY partition but there were no such forum posts that I could find.. Therefore I decided to make this post!
REMINDER: this tutorial is for those that find it difficult or are scared to change their OS without knowing what's going to happen.. I had to figure this all out on my own and therefore I want to help other people with similar problems! So maybe it's a bit noob for this forum I don't know.. but please don't hate because of that! ^^
WARNING: THE INSTALLED OS MUST BE A 64-BIT VERSION, ALSO I'M NOT RESPONSIBLE FOR ANY DAMAGE YOU CAUSE TO YOUR NOTEBOOK/NETBOOK!
It is also recommended that you download all the drivers for Windows x64 before you install Windows because the network card won't work because of a lack of drivers so you need a second PC with a USB or you download them before the OS switch and put them on a USB.
Step 1: Make a bootable DVD/USB with Windows 7 x64 ISO on it, this can be done with Rufus for USB Flash Drives or PowerISO for DVD's! (I'm sorry I'm not allowed to post external links so you will have to google it )
Step 2: Restart the PC and when the text MSI pops up you press the DEL (numpad " . " key) and you will get into the BIOS Menu
Step 3: Go to the BOOT tab and select Boot Mode (or something similar) and change the Boot Mode from UEFI to Legacy
Step 4: Now you're Windows USB/DVD should be bootable (Microsoft says that Windows 7 supports UEFI Boot but I tried using multiple ISO's on different USB's and DVD's with different write speeds etc. but I didn't get Windows 7 Setup to boot beyond the 'Starting Windows' screen)
Step 5: When Windows 7 Setup is Booted select your country settings and time format and don't select the Upgrade option but the Custom (advanced) option to install Windows 7.
Now it's getting a bit difficult for most of us... Windows 7 Booted in a Legacy Boot Mode does not support GPT (Guid Partition Table) Disks, those can only be writed upon in UEFI mode. So now we need to change the Disk Partition Table to MBR (Master Boot Record). When you're at the partition menu, format and delete all partitions (yes don't worry you can safely delete all the partitions (when deleting the BIOS_RVY partition the F3 Hotkey function won't work anymore but we don't want that because it will recover Windows 8 but we hate that OS.. that's why we want to change to Windows 7!)
Step 6: Now that all the partitions are deleted on the disk, we can openup CMD this can be done by pressing SHIFT+ F10 in the partition menu of the Windows 7 Setup.
Now type the following commands:
Diskpart
List Disk
Select Disk # (probably 0, because the most notebooks only have 1 HDD)
Convert MBR
Now your HDD is converted to a MBR Partition Table
Step 7: Make a new partition (or more, depends on how much storage you have and want on your C:\ partition, Windows will automatically make some System partition(s))
Step 8: Select the partition on which you want to install Windows 7 and let it install! the MSI GE70 2OE supports Windows 7 x64 so all the drivers for that OS can be downloaded at the MSI website, product info (GE70 2OE) and then downloads -> Drivers.
Step 9: Install all the drivers and you're ready to go!
I hope I helped you with this problem, for me it was kinda hard to figure out that you could safely delete all the partitions on the disk without screwing up your PC.. So I hope I gave you some confidence with doing so after reading this tutorial!

Quote from: CanesBridge on 06-August-13, 00:02:42
Hey man
I did this on the new msi ge60 2oc 014ne, which should be pretty much the same. Almost everything seems fine now except for two things.. I still cant det the wireless network adapter working, even though the ethernet works and Ive installed all drivers i could find. Do you have any idea what to do?
Second thing, in the Windows experience index, it gives my graphics card the grade 5.1, but it should be around 7. I installed the nvidia driver and all, so it doesn't really make sense to me... Any suggestions? Thanks!
Oh yeah, and the big foot boot agent message that shows up every time i boot the machine, i cant make it go away... I click shift + f10, clicks disable message and f4 for save and quit.. But it shows up again nemt time i boot... An annoying useless waste of time..
I guess it's pretty much the same indeed, do you have installed the Windows 7 x64 drivers for your wireless adapter or tried to install the Windows 8 ones? That could be the problem? If that's not the case and your ethernet is working, try checking for windows updates and see if it automatically installs the drivers for you? Make sure you installed the AzureWave Wireless LAN-NB114H driver that is available for your PC for Win7 x64, that driver as the name suggests is for wireless connection. Killer Bigfoot LAN is just for boosting your card so it's faster over LAN but the AzureWave makes the wireless connection available.. It worked for me so it should work for you?
If you did this all, try reinstalling it.. If that doesn't work, try formatting al partitions again en reinstall Windows 7 and start with a clean install...
About the videocard rate.. If your having problems with low FPS during gaming (maybe lower than normal) make sure you have installed the MSI driver for your graphic card (don't download it from the NVidia website) If you don't know, you can find all drivers for your device on the MSI website, Products -> Notebooks -> Gaming Series -> GE60 2OC -> Downloads
If the lower rate of the video card didn't cause low FPS I wouldn't worry too much if I were you
Oh, and about the Bigfoot Boot Manager.. I have the exact same thing.. I'm still figuring out how to get rid of it, but for now I went into the configure mode and set the message to disabled and the message time to 1 second (so that 1 second extra boot time isn't that bad..) If I found a solution to get rid of it I will let you know!
Hope I helped you, if not feel free to reply and ask again! We will figure it out together, or with help from someone else on this forum!

How to install Windows 7 from a USB drive!

This is even easier than installing Windows XP from a USB drive, and will also reduce the time taken to install Windows 7, it took me about 15 minutes!
The advice in the guide is also applicable to installing Vista.
You need basically:
a USB flash drive at least 4GB in size
a Windows 7 DVD
To sum up:
Format your USB drive, with the NTFS filesystem
Open Command Prompt as an administrator, and run the Bootsect.exe program off the Windows 7 CD to make the USB drive bootable
Copy the contents of the Windows 7 DVD to the USB drive
Restart your PC, press F11 (or whichever key it is) to access the Boot menu, and select your USB drive to boot from
Full guide here:
http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/

Quote from: bnborg on 16-February-11, 10:28:04
I have done this and it is simple.
I cleaned and (re)formated an 8GB flash drive under Windows7 using diskpart. I chose quick format and a fat filesystem. It doesn't need to be ntfs. I had diskpart mark the partition active. I copied the DVD contents to the flash drive. I also made a folder on it for motherboard drivers.
After that, I booted the drive on a new machine. Windows7 setup came up, and didn't find any hard drives, other than the USB flash drive. I clicked the button to load drivers, and pointed it to the folder I had copied them to on the flash. Windows installed without problems.
Hi bnborg..Do u mind sharing with me your motherboard driver folder? I have the MSI U135DX Netbook and each time I hit the button to install Windows 7 it asks me for some mobo driver...Think i might need it to get tru with a successful install..

How to Install Windows 7 Without the Disc

1a) Here is very useful article from PCWorld.com. The article is entitled "How to Install Windows 7 Without the Disc" and means just what it says. The article also has links to Magical Jelly Bean Keyfinder and legitimate Windows 7 ISOs from Digital River, a licensed distributor of Microsoft software. The article lists "Step 1" as;
"Find your Windows 7 product key: Typically this 25-character alphanumeric string is printed on a sticker affixed to your PC or on documentation included with your PC. Alternatively, you can use a keyfinder program such as Magical Jelly Bean Keyfinder to pull your product key from the Registry. You need your product key to reinstall Windows."
1b) Using a key finder, however, is only useful if the Windows 7 product key was printed on a sticker (Microsoft Certificate of Authenticity) affixed to your PC, on documentation included with your PC, or sent via email by Microsoft. Assuming your computer came from one of the big brand computer manufacturers... HP, Sony, Dell, Gateway, etc... as most do, it uses a generic "mass activation" OEM SLP key. Trying to use this key by itself isn't going to work. This OEM SLP key needs to be mated with an OEM SLP certificate and an appropriate OEM BIOS with a proper SLIC table.
1c) Here is where ABR Beta With Windows 7 Support comes to the rescue. Follow the "How to use it" section of ABR for Windows Vista for information and instructions on how to use ABR. The steps listed for Vista apply to Windows 7 as well. Perform the "activation backup" to "backup" and save the OEM SLP key and OEM SLP certificate. Save the entire ABR folder to an external location for later use. This will allow you to pre-activate your "clean" Windows 7 install on the computer you pulled the key and certificate from.
1d) Now install Windows 7 from your new "Windows 7" disc or USB stick, following all prompts as needed. Don't enter a Windows 7 product key if request. Also, don't allow Windows to try to auto-activate. Once Windows is fully installed, run ABR "activation restore" to "restore" the previously backed up product key and certificate to the new Windows 7 install. Verify that Windows is activated, repeat "activation restore" if needed.
2) Here is another useful article, this time from SevenForums.com. This arcticle is entitled "Clean Reinstall - Factory OEM Windows 7" and provides detailed steps required to backup your computer, audit current hardware and software, locate software and drivers, install and activate Windows 7, and create a Windows 7 Backup Image of your fresh install.
Good luck.
Links to additional Windows 7 SP1 "Editions" and "Languages" can be found HERE and HERE.
Link to "ei.cfg Removal Utility". The "ei.cfg Removal Utility" is a simple tool that will remove the ei.cfg from any Windows ISO disc image, thereby converting the image into a "universal disc" that will prompt the user to select an edition during setup instead of being forced to use different discs for different versions of Windows 7.
Direct link to Windows 7 USB/DVD Download tool.
<Cross posted to Notebook Operating Systems and Software for Notebook, Laptop, and Netbook users>
EDITED by Frank on 8/28/2013
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

ervis,
Before formatting the hard drive you should have been able to use the HP Recovery Manager to create your recovery discs or perform a system recovery. This is provided the recovery partition wasn't already corrupt or damaged. If the "D:" HP Recovery partition is missing or damaged and you don't have a set of HP Recovery Discs, you will need to use the information in my previous post to get your computer up and running again.
The information in the document referred you to applies to several different "types" of installations;
Using ABRbeta is only needed if you have an active OEM factory SLP (system locked preactivated) installation of Windows. You use ABR to pull the factory key and certificate off the computer, to reuse it on the same computer with a clean Windows install.
If you are just installing Windows and are going to use the Windows 7 product key on the COA on the side of your computer, all you need to do is download the same version of Windows that your key is for and burn the ISO. Now install Windows answering or following all prompts as needed (except do not enter the Windows product at this time... it will be entered later). Once Windows has completely installed, enter the key and activate it. Your Windows 7 OA key should work on a SP1 install without issue.
The only thing I see that could mess things up, is the language of the install. If you are still having trouble activating Windows, please reference the ISO you download and a post a photo of your Windows COA
with the key erased or Xed out.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Re-installing windows 7 hp-pavilion dm1-3200sd

Hi all!
For over a year I've been very happy with the performance of my hp-pavilion dm1-3200sd, but I'd like to make an upgrade to an SSD, because my netbook will then get more snappier!
I actually have one question: how do i re-install Windows 7 correctly on my SSD? The SSD I'm looking to buy is the Samsung 830 Series laptop upgrade kit, with usb-sata cable. I've already seen a partition D named "recovery", but when I will put in my SSD, the partition will be gone (since partition D: is on the original HDD).
So (I think) that I have two choices right now:
- Copy the recovery partition to an USB flash-drive, install the SSD and then boot from USB and install Windows 7 to the SSD.
- Connect the SSD via USB to my laptop, then copy the recovery partition to my SSD. After that I install the SSD in my netbook, and then install Windows 7 to the SSD.
Is there a much better option out of the two stated above? Will these option bot work? And last but not least: after installing Windows 7, does it activate automatically?
I'd like to do install a fresh Windows 7, so there is no need to back up any programs, settings or documents.
Thanks in advance!
Bastiaan, Netherlands

Hi all!
For over a year I've been very happy with the performance of my hp-pavilion dm1-3200sd, but I'd like to make an upgrade to an SSD, because my netbook will then get more snappier!
I actually have one question: how do i re-install Windows 7 correctly on my SSD? The SSD I'm looking to buy is the Samsung 830 Series laptop upgrade kit, with usb-sata cable. I've already seen a partition D named "recovery", but when I will put in my SSD, the partition will be gone (since partition D: is on the original HDD).
So (I think) that I have two choices right now:
- Copy the recovery partition to an USB flash-drive, install the SSD and then boot from USB and install Windows 7 to the SSD.
- Connect the SSD via USB to my laptop, then copy the recovery partition to my SSD. After that I install the SSD in my netbook, and then install Windows 7 to the SSD.
Is there a much better option out of the two stated above? Will these option bot work? And last but not least: after installing Windows 7, does it activate automatically?
I'd like to do install a fresh Windows 7, so there is no need to back up any programs, settings or documents.
Thanks in advance!
Bastiaan, Netherlands

NB100 - How to install Windows 7 without CD drive

Hi. I wondering if some one knows how to install Windows 7 whit out a CD player.
I have an external HDD.
Is it posibel to do a image on that one to boot from?

I'm typing this on an NB100 (Upgraded to 2GB of RAM) running Windows 7 RC .
Make sure to update your BIOS to the latest version (1.9 I think) and then you can mount the Windows 7 .iso as a virtual drive using Daemon Tools in XP and run it and do a clean install.
Windows 7 will back up all your documents, music, videos etc in a folder called Windows.old and it will find all the new drivers you need all by itself (at least it did for me). If I remember correctly the only one I had to install again was the Bluetooth Stack.
All the Toshiba drivers and manuals etc will still be on your hard drive too, I think they're all stored on a small separate partition, which I think is pretty neat.
It took me a while cus I did as much research and reading up as I could beforehand but in the end it was really easy. Shouldn't take you more than an hour really.
Windows 7 is also running pretty damn well too. The only problem I have is that sometimes the taskbar disappears after the screensaver has been running, but a friend of mine is having the same problem on his Samsung netbook.

Install windows 7 to s110, no CD/DVD driver found

I just bought Lenovo Ideapad S110 netbook. It already has MeeGoo OS installed but I want to install Windows 7 32 bit. So I made a bootable usb using Windows 7 USB DVD Download Tool and tried to install Windows 7 using my usb. However I have an error "No CD/DVD driver found" I have tried all three usb slots but there still is that problem. All three slots are USB 2.0. Can anyone please help me with it?
Solved!
Go to Solution.

Hello and welcom,
That error message can also mean that there is a problem with your original Win 7 ISO or the way the USB flash drive was prepared or the copy to USB. Or perhaps a defective or incompatible USB flash drive. If it is a downloaded ISO, try the download again.
The way I usually make bootable Win 7 installer is this: use DISKPART to prep the drive - list, select, clean, partition, format NTFS, set active. Use 7zip to copy the contents of a downloaded ISO to the flash drive. If you're using a DVD, just copy the contents. In either case use an SP1 DVD.
Maybe you've already tried this.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to install Windows 7 over corrupt Windows XP

Hello,I have a MSI U 100 wind Netbook with Windows XP. I suddenly get this Mistake: Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM
I would like to install Windows 7 Home 32 bit now. Can I just install it over my corrupt Windows XP?
Thank you.......
Gale

Hi,
Regarding the error messages Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM, please take a look at the below KB article:
How to recover from a corrupted registry that prevents Windows XP from starting
For install Windows 7 Home 32 bit on your computer, we need to make sure the hardware is compatible with the new OS, and the manufacturer get the available drivers to have the devices work well with the new operating system. We could take use of
Windows 7 Upgrade Advisor.
More information, please take a look at the following article:
Upgrading from Windows XP to Windows 7
Upgrading to Windows 7: frequently asked questions
Hope this helps
Best regards
Michael Shao
TechNet Community Support

Plese Help. Me have FAT32 USB, ISO. Boot camp:Can't install Windows Support Software because the Software Update Server "(null)" can't be found. It asks me to network Diagonostics, but internet ok. Plese Help

Plese Help. Me have FAT 32 USB, ISO, Boot cam say can't install windows support software because the software update server "(null)" can't be found.
I know there are many other threads, but I guess I couldn't find clear answer to this problem. Is that the Apple's server problem or just me?
I'm trying to install Windows7 via Bootcamp, with FAT 32 formated USB with ISO, on Macbook air 2012.
Thanks!

The problem is the encryption and how your notebook handles it rather than a Time Capsule problem. I had similar problems until I updated the WLAN drivers on my IBM T41.
The way I convinced myself it wasn't an Apple problem was to connect my IBM T41, via ethernet, to my AEBSn. I was able to connect to internet so I knew it was a conflict between my wireless card and the AEBSn.
I am now using the WPA2 encryption for the AEBS without issue and connecting many different types of hardware; three iPod Touches, two MSI Wind Netbooks (Win XP SP3), one IBM T41 (Win XP SP2) wirelessly and both my 20" iMac and Dell 8250 Win XP (SP2) by ethernet
The MSI Winds are brand new and they would connect to the AEBSn but couldn't get an IP address from the internet (Limited or No Connectivity error message). The AEBSn was using WEP encryption. After doing a little research I found that WEP was a very common cause of this error message so I switched the AEBSn to WPA2 and everything works fine now.
Don't assume that because you can't connect via OPEN it isn't a encryption issue because my Winds wouldn't connect that way either...it wasn't until I changed to the WPA2 Personal that they connected.
You may also need to change the program that handles the WLAN connection, sometimes Windows handles it better but for the newest addition to our household, the MSI Winds, I am using the Realtek utility that matches the WLAN card and everything is hunky dory...
Finally sometimes firewalls will prevent getting the IP address...doesn't happen often but it has happened to me so I would double-check that by turning off the Windows Firewall and just verify that it isn't the firewall (that's never been a problem with my Apple AEBSn but it was a problem with an older Dlink g model).

G510 installed Windows 8.1 Function keys not working properly

Hi
I am Bharath
last week i have puchased lenovo g510 laptop and installed windows 8.1 and later on automatically function keys and all the keys were not working properly. if i press key to increase brightness and some other operation is performing by its own. What's wrong with this LENOVO brand is this the way you take lots of money from people. I need an immediate solution from basic support to my home. If at all it is not resolved i will file a case on consumer court that LENOVO was chaeten me and what ever it may be i will go for end.
Give me a clear answer with out any stupidity
Moderator Note; subject edited; post moved here to start new thread

hi bharath666,
Welcome to Lenovo Community Forums!
Were you able to install all the drivers and Software After the New installation of Win 8.1?
Get the drivers here
http://mobilesupport.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-...
Start with the Chipset installation first then whatever comes next.
Make sure you select the proper version for your Windows type and version.
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Big trouble while installing windows 7 on Toshiba mini 305-310

After upgrading my RAM from Gig to Gig, I decided to install windows 7 on my mini 305-310(black model). First, when I installed windows 7 ultimate (64 bit), everything was fine except screen resolution(my screen resolution stuck at 800 by 600 and I couldn't find the solution). After hopeless attempts, I decided to reinstall windows 7 hoping the screen resolution problem would be solved.
When I re-install windows 7, so many problems emerged. My current problem is "hardware problems were detected" message. Right now, I run memory problem test but I don't know what I did wrong. If hardware problems were detected, that means my Gig ram would be a problem?
I just finished memory test but I can't re-install windows 7 on it. The latest error message is 0x000000F4.
Any help would be great since I spent two days without any success.
My Gig ram is a Crucial brand.
Thank you.
Frustrating starter

Thank you for your reply. Actually, my posting has some word problems. Actually, I upgraded 2 gig crucial RAM before I installed Windows 7. In two days, there was no problem after Windows 7 install except screen resolution problem. However, after 2 days, I got an error message("hardware problem"). so I replaced my original 1 gig ram and ever since there is no error message regarding "hardware issue".
Right now, I try to find drivers for fixing my screen resolution issue but still there is no success. It would be great if anyone shed light on me to tell what kind of driver I should download and where I can find the driver.
People asked me why I upgrade Windows 7 and they seem to think anyone who upgrades Windows 7 on a netbook is stupid. Well, I may have a stupid mistake for trying to replace XP but isn't it a natural way to have a curiosity for "new" one? My main computer is Mac desktop and I love it but for a personal research, I also need Windows.

Cannot install windows 8.1 on imac 5k - apple support says "Correct, that machine can't install windows" Boot camp fail

I have a brand new imac 5k, with 4ghz i7, 295x GPU, 3.1TB fusion drive. Bought the machine so I could dual boot - I need windows for VR Dev work.
I've spent the last week and a half on tech support calls with Apple Senior Tech agents, and Microsoft agents as well, and today have been told that indeed this machine cannot run windows 8.1. Apparently Apple engineering knows about the issue, but says the problem is microsoft's. Ugh.
The latest iteration of the issue comes when installing 8.1 onto an external thunderbolt SSD (without even using boot camp) - I go through the EFI installer, convert the drive to GPT, format it as ntfs, but when I select the partition to install onto, the installer says it can't find the partition it just created. Smuh?
I've also tried the install through boot camp. This installation actually worked twice, but the install was unstable. After booting back into osX, then returning to Windows, the windows install went corrupt and couldn't be repaired. Subsequent attempts to install windows yielded a flurry of different errors, including "windows doesn't support GPT in this mode" or "the disk is locked, please unlock the disk" or "MBR must be converted to GPT" (where once I converted to GPT, the drive could no longer be found, despite the operation completing successfully.)
At any rate, it's a huge mess. I'd happily return the machine for a different config, but the company I bought it from will only swap it for a similar model -- so I've spent a pile on a machine that does not function as advertised; apple says "too bad, talk to Microsoft." Microsoft says "too bad, we've never seen this, this is an apple issue."
Has anyone out there gotten windows up and running on an iMac5k with fusion drive? If so, did you have to go through a crazy maze to make it work?
Any help is appreciated.
Thanks,
MC

Michael Conelly wrote:
After much gnashing of teeth, and a half dozen support calls, I'd all but given up. I finally seem to have solved this though - sort of - by installing windows 8.1 on boot camp on an older iMac, then cloning the bootcamp disk to an external thunderbolt drive via Winclone. That worked seamlessly, sticking to winclone's instructions, and I can boot via EFI to Windows 8.1 on the new iMac. So far so good.
I usually install W8.1 via EFI by using DU and a Free Space partition. The 3TB Fusion is first split into the underlying SSD/HDD physicals. OSX and Windows OSes are installed on SSD via EFI (no BCA). The OSX part and half the HDD are then used to create a new CS volume. The other HDD half becomes NTFS for non-Windows OS files. The Hybrid MBR method is completely unsatisfactory with the 3TB Fusion drive.
How is the TB/Winclone image for performance of the OS (since pagefile.sys is also on the TB)?

Install Windows 8.1 Pro on Mac Mini Late 2014

I'm trying to install Bootcamp on my Mac Mini. Windows reports that it cannot install or create a partition on the drive after formatting the BOOTCAMP partition as NTFS.
This is my setup:
1. Mac Mini Late 2014 with 2TB Fusion Drive.
2. Windows 8.1 Pro x64 full version ISO downloaded from Microsoft Store.
3. Sandisk Extreme Flash Drive (I have tried both 16GB and 64GB).
4. Bootcamp partition = 500GB.
5. Other USB devices plugged in: Corded USB Mouse and Apple Extended Keyboard (both of which are required to enter the serial number and navigate the installer window).
6. No additional storage devices of any kind are connected aside from the internal Fusion drive and the installer drive.
7. Booting from the EFI portion of the Bootcamp created Windows installer.
I have read that I should try using a USB 2 flash drive rather than a USB 3 flash drive, so I will try that next. I fail to understand how this could make any difference.
If you have any other tips, please let me know.
I have installed or helped other people install bootcamp many times over the course of the past 2 years. Every single time it has caused endless headaches and literally weeks of wasted time.
I have read endless posts on what is causing these problems. I will consider summarising these for anyone else having the same problems. Everyone has their theory so far about this Bootcamp nightmare, but so far there doesn't appear to be any one magic solution.
Apple's inability to address the issue suggests that the problem may be with the Windows installer. Perhaps Microsoft is deliberately causing this?
I suspect the two most likely causes of these issues are the downloaded ISO or the Thumb Drive.
If you have any better idea, please let me know.
On another topic, how to I rename the NTFS partition back to BOOTCAMP? All options to rename this partition are greyed out in Disk Utility...
Cheers,
Paul

Paul@Sydney wrote:
7. Booting from the EFI portion of the Bootcamp created Windows installer.
The FAT32/NTFS partition is usually not adequate for an EFI install. You can delete the BCA-created partition and create a Disk Utility partition which is formatted as Free Space. This will be split into an MSR and MSD. Fusion drives create problems, especially if the BC partition lies outside the traditional MBR 2TB boundary.
Before you delete the BCA-created partition, please post the output of
diskutil list
diskutil cs list
sudo gpt -vv -r show /dev/disk0
sudo gpt -vv -r show /dev/disk1
I have read that I should try using a USB 2 flash drive rather than a USB 3 flash drive, so I will try that next. I fail to understand how this could make any difference.
Windows installers up to W8.1 do not have USB3 drivers. These are installed after Windows is installed and BC drivers are in place.
Apple's inability to address the issue suggests that the problem may be with the Windows installer. Perhaps Microsoft is deliberately causing this?
The requirements are pretty strict when installing Windows. Any deviations cause headaches and grief.
I suspect the two most likely causes of these issues are the downloaded ISO or the Thumb Drive.
The USB is usually the issue.
On another topic, how to I rename the NTFS partition back to BOOTCAMP? All options to rename this partition are greyed out in Disk Utility...
After Windows is fully installed and BC drivers are in place, log into Windows, right click on it and rename it on the Windows side. It cannot be renamed on the OSX side with diskutil renameVolume. Here is an example sequence. You cannot rename volume during the installation process.

Installing Windows XP on E10-30 netbook

Similar Messages

Maybe you are looking for