Installing Windows XP on second hard drive

I just went through and installed a second 500GB internal hard drive. I started bootcamp manager, checked the option of using the entire second drive as my windows "partition" or whatever. It started installing fine. i went throught the whole set up part where the screen is all blue and not really a gui. then once it went through 100% of the initial phase it had me reboot. and started to do the second stage of installation, and after a minute or two gave me the blue screen of death with some unknown error. what do i do?

I tried slipstreaming with nLite (nliteos.com) and the first time it failed. another missing driver or something. if someone could upload a zipped slipstreamed version somewhere that i can download and use my own serial with?
otherwise im trying a second time, but im not really doing anything differently, so i have no idea if it will work.
my cd is for sure Windows XP Professional with SP1. i havent tried removing any hard drives or anything, im kind of scared to do that with out specific working instructions...
p.s. i have a few apple id's and can never remember which is which. anyway its still me
Message was edited by: programmedDeath
p.s.s.s.s does a mac pro have anything against plugging this hard drive into my pc, installing windows xp with sp1, upading it to sp2, then plugging it back into my mac pro, and using the osX disc to add the apropriate drivers? im really frustrated and expected to have this done like a week ago.

Similar Messages

  • Installing windows 7 on second hard drive in macbook pro 7

    Dear fellow forumers. I am currently having trouble installing windows 7 on my second hard disk as whenever I restart my laptop after the bootcamp assistant has made a partition in the HDD, instead of going into windows installation, my laptop screen shows a blank/black screen with a blinking dash at the top corner. I am currently using a 15" macbook pro 2011, installed an OWC ssd as my primary hard drive where I run my os Lion and windows (in another partition). Due to insufficient disk space with the applications in both OS, i am now attempting to install a second windows 7 in a second hard drive which I split the HDD equally into two partitions (one formatted for windows installation and the other for data storage). Just for the information, I am also installing the windows 7 via an external optical drive.
    I have been running out of wits as I have been researching whole night about possible oslution but it seems that my problem is quite a peculiar one. Will really appreciat any help that I could receive.
    lastly, is it possible to run parallel desktop from my ssd (Primary hard drive) and then attempt to import the bootcamp from my second hard drive?

    Well it's not particularly hard, I just don't see why its necessary. It seems silly that I've got to physically start removing hardware from my computer just to get an OS to install on a specific drive.
    I was under the impression the Boot Camp gave the option of where to install Windows, as in other drives from the ones with OSX on them.

  • HT3986 can i put windows on a second hard drive that is partitioned.

    can i put windows on a second hard drive that is partitioned with out boot.camp deleting the second partition and making one bootcamp windows partition?
    i want one partition to be OS extended journaled and one partition for windows. Or do I have to create the bootcamp partition on my main drive? . my main drive is a solid-state drive which I run OS X and it's not as big as my mechanical drive. I would like to put windows on my mechanical drive but still save a lot of the drive for my mac data. So I would like to have that drive partitioned with OS extended journaled. Whenever I run boot camp and choose that hard drive boot camp will only allow me to erase the whole hard drive and make one partition for Windows. Maybe if I put OS X also on the mechanical drive and then try? Would that work. Thank you for any information you might have. Robert

    Yes! why not.Just make sure after you install windows,linux,freebsd or any other os set to use mbr if there is a gpt partition first ALWAYS gptsync.

  • How to install Windows 7 on new hard drive?

    I have changed the old hard drive (500 gb) with a new hard dirve (1 Tera), and now I have two problems: -
    1. How do I install Windows 7 on new hard drive?
    2. My laptop was pre-installed Windows 7 Pro, but all the DVD kit (Application & Drives Recivery Disc + Operating System Revocer), which was provided (by Lenovo) for the laptop is in the Windows 8 Pro. So how do I install Windows 7 Pro, in my laptop while all DVD kits are in Windows 8 Pro?
    by the way this is my laptop spec (for reference) ; -
    * Note *
    I plan to install Windows 7 Pro in my new hard drive using another Windows 7 DVD (Not DVD provided by Lenovo), but how do I get all the Leveno program which found within the 'Application & Drives Recivery' disc (such as ; - Lenovo System Health and Diagnostics, Lenovo Power Control,Lenovo's Fingerprint Reader) to install in that hard drive? (as I tell you before, all the DVD kit is in or only for Windows 8 Pro)
    I hope somebody will help me answer my question,
    Thank You
    Solved!
    Go to Solution.

    I got the solution;
    Answer to question 1 ; using a backup & recovery software to clone my current OS, then transfer to my new hard drive.
    Answer to question 2 ; download all the Drivers and software ( all the application that located on the DVD kit that I have) on Lenovo Official Website.
    or other solution, send it to a computer service shop and let the experts ( the workers) install it for me ( the most simple and safe way).

  • Problem installing windows on a secondary hard drive

    Hi,
    Here's my issue (sorry for my english, I'm french):
    -I have a macbook pro 15" with OSx Mavericks.
    -I have a SDD harddrive PLUS a 500GO HDD connected to the optical slot.
    I want to install windows on my secondary hard drive.
    What I have done so far:
    -I've cloned my older windows partition.
    -I've created a bootcamp partition on my secondary HDD.
    -I've restaured my clone to the new bootcamp partition on that secondary HDD.
    Up to that point, everything seemed alright.
    BUT when I try to boot on the windows partition, I get this message:
    no bootable device insert boot disk and press any key
    As if my MBP couldn't boot on a secondary hard drive.
    I've looked for answers on this forum but didn"t find anything.
    thanks,
    m

    The only difference between your setup and mine is that I have the SSD in the optical slot and the windows image is on my HD. I boot from the optical slot though, as all my regular Mac stuff is on the SSD. All I can think to do is use Bootcamp to delete the partition and try again. It sure seems like it should work.

  • Can I install itunes on my second hard drive?

    Hello All,
    Just wondering if I can install iTunes on the secondary hard drive where I keep all my audio/video files. That way, when I reinstall my OS or do an upgrade to Vista, I won't have to reload iTunes?
    Thanks!

    You can tell iTunes to install to any hard drive in system. But this will not save from having to reinstall program if/when you reinstall OS. iTunes like most Windows programs installs files in multiple folders on drive and makes registry entries.
    You can, and should, set iTunes to store library on the second drive. That way when you have OS problems your media files should not be affected.

  • Can't instal Windows 7 to new hard drive

    Hello everyone,
    I was looking for solution for a while, but cant find it, so I really hope you'll help me here ! 
    First of all, I 've been using my pc until I received the S.M.A.R.T. warning about possible hard drive failure soon, and one morning PC didnt start - one of the hard drives was dead (in my hp model there are two hard drives). After finding out which one was it ( I tried taking one hard drive out, leaving the other and vice versa) I bought a new 500 GB hard drive. Aparently the damaged hard drive was the one with operating system, because of startup message which told me that operating system not found. Nothing fancy, just instal windows like I always did, or so I thought ..
    Got my USB flash drive with Windows 7 64 bit, plug it in, the usual windows instal guide loads up.  I choose my language , keyboard input etc . At the point where I have to choose "where do I want to instal my windows" I see two hard drives: 1) disk 0 Partition 1 (my old original  232 GB stock drive) and 2) disk 1 Partition 1 (new recently purchased 500GB drive).
    So ofcourse, since I replaced old hard drive with the new one I just bought, put it in the same slot, naturaly I chose my location for windows - new hard disk 1 Partition 1. When I highlighted it, a yellow mark apeared at the botom which said "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS menu". 
    Ok, so I tried to continue anyway, I pressed next and windows began to instal, took about 10 - 15 mins. Everythings normal until first restart part before completing instalation. PC restarted and .. Windows instalation setup started once more from the begining. So I thought , ok I ll try to instal to the old hard drive disk 0 Partition 1 ( this time there was no yellow warning mark). So instalation began again , restarted , and ... Once more instalation setup starting from begining ! 
    I am really lost here, I tried replacing hard drives places whith each other, or leaving just one of them, every time windows starts instaling from begining ! Allthough, everytime there are less and less disk space, which means it actualy is instaling. 
    So any thoughts where to start ? 
    I would be so greatful for your help,
    And see ya 

    Hi @Seniunas ,
    Welcome to the HP Forums!
    It is a terrific place to find answers and suggestions!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    It is my understand that one of your two hard drives failed.  You have replaced the failed drive and are having a difficulty installing Windows 7 from a USB stick.
    I have some questions.
    What is your exact model of n DV9700 notebook?
    How Do I Find My Model Number or Product Number?
    Is this a retail version of Windows 7?
    Were your drives setup in a RAID configuration or  just  two individual drives, one being the boot drive  with Windows.
    You could try this,  I am not sure if it will work.
    Remove the 232 GB drive completely from your system.
    Boot to your Windows 7, USB stick and let Windows format the drive before it installing Windows.
    If this completes successfully, make sure the boot order is set to boot to that drive and test it.
    If you are then able to boot into windows,  shut down the notebook and reinstall the secondary drive.
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Can I install windows on a RAID hard drive?

    Hi,
    I recently purchased a used macPro. This mac pro had a raid set so 4 1TB hard drives were created to make one 4 GB partition. This made the raid utility pop up frequently saying there was something wrong so I just broke the RAID set and tried to set the disk up as their on storage partitions (Just as if they were 4 normal hard drives. Now that I did this, only 3 out of the 4 hard drives are visible in disk utility. Also, I reinstalled macosx snow leopard and tried installing bootcamp but when I partition the hard drive and restart using the windows installation disk, it doesn't show that I have any available hard drives to install windows on. Is this because of my RAID disks? (Sorry I don't know anything about raid disks and didn't know this computer had it before I bought it)
    Any help would be appreciated.
    Thanks.

    As stated in the Mac Pro RAID card FAQ you can't install Windows if you have the drives controlled by that card.
    Question: Why can't I install Boot Camp on my Mac Pro or Xserve that uses a RAID?
    Answer: Boot Camp does not support the installation of Windows onto a Mac using hardware or software RAID (Redundant Array of Independent Drives). Boot Camp is not supported on the Xserve with or without the Xserve RAID Card installed.
    http://support.apple.com/kb/HT1346
    Look inside and see if there is a RAID controller from Apple, proably top slot #4. Also look in System Profile under SATA interface.
    Pull non-graphic card, seems you don't need it if you have one.
    You are not getting something: internal hard drives are one thing. RAID card is another. The RAID card just replaces the normal SATA controller that otherwise interfaces.
    Take a look at the photos and manual for the card.
    http://support.apple.com/kb/HT3514
    You can find the above from the Mac Pro Support home page I posted above.

  • How can i install os on a second hard drive

    can i install  OS ON A SECOND HARD DRIVE

    I would say it is 99% normal common and a must. Maybe a couple - a bootable copy of your working system, no need to "install" it.  One that you can use to restore from in addition to TimeMachine.
    Not knowing what model Mac Pro whether it is 6,1 Late 2013 or something older and what its options are.
    http://liondiskmaker.com/
    Lets you create your own clean install Mavericks installer (use flash, hdd, any bootable volume)
    http://www.bombich.com/
    Carbon Copy Cloner vs. Super Duper-Which is better?  (  1 2 3 4 5)
    http://forums.macrumors.com/forumdisplay.php?f=1

  • Can I run just windows on a second hard drive in my MBP?

    I'm looking to run windows apps but dont want to put windows on the same hard drive as the mac os.

    Read the Bootcamp Installation instructions. http://www.apple.com/support/bootcamp/
    Windows must be run on the main internal drive. Windows will not boot from an external drive.

  • Install Windows XP on External Hard Drive

    Is there anyway I can install Windows XP on my WD 500GB External HD? It serves as my Time Machine for my MacBook, which doesn't have a whole lot of HDD space left. I'd like to install XP and be able to run it on my Mac, but it takes up way to much space.
    If I can't install XP to my external drive, is there any suggestions for clearing space on my MacBook? Any way to remove unwanted applications?

    Jerid Lucas wrote:
    I don't quite understand your answer, or maybe you don't quite understand my question. Here are a little more details.
    I have an Early 2008 Macbook with a 160GB HDD with Tiger installed.
    For BootCamp you need OSX Leopard since the BootCamp Beta from OSX Tiger no longer works.
    I'm interested in running Windows XP on my MacBook, but I'm concerned with it taking up space on my already small HDD. However, I do have a 500GB external HDD that I have plenty of space on.
    My question remains, is there anyway that I could install Windows XP on my external drive while keeping Leopard on my laptop HDD. Would I be able to use BootCamp to assist me. If not, how would I access/boot XP?
    See my first post. Windows is not intended to be booted of an external harddisk.
    This is prevented by Microsoft and BootCamp can not change this.
    Windows XP itself needs about 10GB of harddisk space. Add to that the amount of disk space that will be used y the Windows programs you want to run plus the space used by the data files.
    So something about 20-25GB for Windows might be sufficient.
    How much free disk space do you have right now ?
    What is 'eating' up your disk space ?
    I know these are several questions, and difficult ones at that, but I believe there is an answer somewhere.
    The answer is given, but the technical limitations of Windows prevent the answer from being what you want to hear.
    Stefan

  • Can I install windows on a fresh hard drive?

    I'm installing a fresh hard drive into a macbook pro, I'm wondering if the hard drive will accept a windows 7 disc to install as OS, or will it only accept OSX, and if I'd have to go through bootcamp.

    Yes, it's a complete OS. But if you have an empty HDD to setup you will need to install the original OS X that came on the computer originally. If it came with Lion or later:
    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet
                if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.
    If it had an earlier version of OS X:
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Can I install solaris on a second hard drive?

    I am completely new to Solaris. My computer runs Windows XP as its primary OS and I have a second (slave) hard drive that I would like to install Solaris 10 on. Does the installation DVD for x64 architecture automatically handle this kind of installation? Is this process possible? If it is, will I have to manually configure the BIOS to boot each OS every time I change my current OS, or will some sort of GUI dialogue come up? I would like information on this subject and if possible, step-by-step instructions.

    Tottaly agree with the last post. Check if your hardware is in HCL, there is a free program you can download from Sun Download page, you burn it to CD and reboot, then it will provide you with all needed information. And if something is not in the list, you will get a hard time seting it up (there are a lot of unofficial drivers). So as an example: networkcard will be hard to install and set up. So check first.
    As from my experiense conserning instalation, I would suggest to do so:
    (in a way as the last post)
    prepare a clean partition, or backup files on a HD. run the instalation, once you will reach the point when it will ask you how to install (Normal or Custom) choose custom, then it will go to several questions concerning where on a HD to install, thats where you can choose partitions and so on.
    Just as a reminder: you dont need alot of space for Solaris to work properly, plus there not so much software which requires big amount of HD. So for OS and nice package for development you will probably need tops 10Gb.

  • Installing Windows XP on SATA Hard Drive

    Hey.  I have a maxtor 80gb SATA hard drive that I put in my new computer, and I want to install Windows XP on it.  I see that the computer recognizes that it's there, but when I do the F6 process to get the drivers for Windows I cannot get anything for some reason.  I hit F6, and it gets to the point where it asks me to install a disk with drivers, and I put the floppy for the VIA drivers in the drive (I'm using VIA after all I've read), and nothing happens.  I don't even hear the floppy doing anything.  after a few seconds of "please wait" the same screen comes up telling me to put the floppy containing the drivers in.  Does anyone know what the problem could be?  Also, in bios, it seems to recognize my floppy drive, since it lists it, and I can use it as a boot drive.  If someone could help me out, I'd appreciate it.  Thanks.

    Hi
    What is meant is the floppy is controlled from 2 parts of bios.
    1. go to advanced bios features, set floppy seek to enable, set boot sequence to floppy, CD, HDD(BB1 = SATA), enable other devices.  Then go to integrated peripherals, make sure PATA IDE and SATA IDE are enabled, just below is floppy controller, enable that, then SAVE and exit,
    If the floppy cable was inverted, the drive light would be on all the time, if it flickers oon and off, it is OK.
    Now try the F6 routine, if it still does not work then a new copy of floppy may be needed.
    Cheers
    jocko

  • Installing software to a second hard drive?

    I am unable to install software on my second interal hard drive. There is a red exclamation point on the picture of the drive when I try to install something there. Is there something that I have to do first?
    I have installed the drive physically and run the Disk Utility application to choose which filing system/structure/format to use. I went with a GUID partition table.
    I ultimately want to install Parallels Desktop and Windows on part of my second drive but since I cannot install any software (Even MS Office) I am having difficulty. Any help is greatly appreciated.
    Thanks!

    Most software installers that do not provide a choice of install location need to install the software in the Applications folder on the startup volume. After installation you can move the application to another location, although it's possible the application may no longer function properly (only really true for badly written software.)
    If you pay close attention to the various stages of the installer some will provide an option to change the install location before you click on the Install button.
    MS Office doesn't require an installer. All you need do is drag the Office 2004 folder to your hard drive.
    In addition to using the GUID partition scheme the format type must also be set to Mac OS Extended.

Maybe you are looking for