Installing Windows XP on Tiger  (10.4.11)

I have just installed Windows XP Pro on my MacPro, and I am having a tough time finding the drivers for many things, especially the ethernet adapter. I don't want to install Leopard (I've heard too many bad things) to get access to Boot Camp.
I have to have Windows to run some software for work. Help!

Without the Leopard DVD there are no available drivers. Boot Camp provides the drivers.

Similar Messages

  • How to install Windows 7 on MacBook with Tiger + Leopard upgrade using Boot Camp

    Hi,
    I've had Vista installed on a separate partition on my MacBook for a while, but wanted to upgrade to Windows 7. I've completely wiped the HDD, re-installed Tiger, upgraded to Leopard and installed Windows 7 using boot camp from within OSX. However, I now can't boot back into OSX - I believe it's because I don't have the latest version of Boot Camp within Windows 7 (it doesn't appear on the task bar), but I also don't have a full copy of Leopard, only the upgrade disk.
    Is there any way to (a) boot back into OSX (I've tried holding down the option key and this doesn't work) and (b) installing a version of Boot Camp that will enable me to switch between both operating systems as I was when Vista was installed & without having to purchase the full copy of Leopard?
    Any assistance would be much appreciated.
    Many thanks,
    Elliot.

    Try to boot from the 10.4 disk then and "Repair Disk". If you can, then try booting from the 10.5 disk and do the same.
    Have you tried holding down the C key also when trying to boot from the Install disks? It could take 30 seconds to a minute or more for the C key/Option key reboots. The Mac DVD HAS to be the OS installer disk not the applications installer, etc,. Sorry if I keep bringing this up.
    You have to keep holding it down the whole time it boots, either it will bypass it and reboot into Windows or it should get to the boot loader window with at least Windows showing up.
    If you can still boot into Windows with no problems then Windows SHOULD show up in the boot loader window. (C key/Option key) It's hardware related, it's the computers manual way of looking for a bootable OS if there's no OS installed yet.
    Don't forget to disconnect any USB devices until you get it fixed.
    Also try to boot from the Windows  installer disk and "Repair Windows" and see what happens.
    Other then your DVD drive may be on it's last legs, I can't really think of any reason you can't boot from the Mac DVD's.  All the other post's I searched for eventually got the DVD boot working, even 10.6 and 10.7 are having that issue, tho rarely.
    elliotfromnewark wrote:
    Hi, ...........inserting the Leopard disk once in Windows to install boot camp and it says that the version on the DVD is only compatible with XP SP2 or Vista.................
    Don't run the installer this time, if a window pops up to "Run" or "Open",  just open it. If it doesn't open the DVD and look for the BootCamp.exe. Right click on the .exe (or whatever it's called) and select the trouble shoot compatibility mode and select Vista. Yes, I know you have W7. See if that works.
    It may have buggered the Mac OS side so you may have to get DiskWarrior (worked for some) or the like in order to fix it. It would definitely be useful in the future.

  • Tiger to Leopard... Need to re-install Windows Partition?

    Hi everyone,
    I'm running Tiger right now and I am going to buy Leopard soon. Judging from all the problems people are having. I have decided I am going to do an Erase and Install. However, I'm running Boot Camp under Tiger right now. If I do an Erase and Install, will that effect my current Boot Camp partition? Do I need to re-install Windows again or will Leopard see that its a separate partition and leave it in tack?
    Thanks

    Erase and install will not touch the Windows partition.

  • Installing Windows on Macbook Pro, NO BOOTCAMP

    I have a 15 inch core 2 duo Macbook Pro and I went to restore my computer to tiger once again and when I did I relised that the disk is too scratched up, I can only get about 90 percent of the minimal installation done.
    After a while of trying diffrent things i got fet up and partitioned my hard drive to Master boot record and poped in my Win7 install disk, I installed Windows 7 perfectly with no problems but now when I go to boot it up all I get is a grey screen and after a while a folder icon pops up with a question mark on it.
    How can I fix this without using another mac or bootcamp, because I DON'T have access to one and i DON'T have access to another mac cd, so don't give me that option, lol.. The only thing I have access to is another windows 7 computer.
    Please help, I thought mac was suppose to be one of the top brand computers. especially with the price of them, but so far I've had more trouble with this mac than what I did with my HP, I had my HP 3 years now and my macbook not even a year.
    Thanks,

    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the desired disk icon from which you want to boot.
      5. Click on the arrow button below the icon.
    Select the Windows disk icon and click on the arrow button.
    Where did you get the Windows installer from? Your HP? That's an OEM disc that cannot be used except on your HP. You need a retail Windows disc if you want to boot the Mac exclusively with Windows. Of course you will not have any of the hardware drivers for Windows for use on the Mac hardware.
    I don't understand your complaints about a computer you don't seem to know how to use, your installer discs are all scratched up and no longer usable, but you have had lots of trouble with it. And, all your doing is trying to use it as a Windows computer. Defies logic.

  • Install Windows XP 64-bit on Boot Camp.

    Can I install Windows XP 64-bit on Boot Camp (Tiger)? Where can i find all the driver for 64-bit? Thank you.

    Hi Amen,
    XP 64-bit was never supported by Apple.
    Therefor you are left to find the needed drivers all by yourself and for Apple-specific hardware you won't find any drivers at all.
    Use the System Profiler in OS X to determine what hardware is in your Mac and then go to the websites for these hardware manufacturers to see/find drivers for XP 64-bit.
    Personally I am not sure if all this hassle is worth the outcome.
    Regards
    Stefan

  • Can I install Windows 7 on Leopard 10.5.8?

    I need Windows to run some proprietary software for work and have a MacBook with Leopard10.5.8. I've read that it can't be done without BootCamp3, and Snow Leopard 6. Can I install Windows without upgrading?

    Yes you can...
    http://eshop.macsales.com/item/Microsoft/OEMW7SP1UL6P/
    Software Requirements
    Mac OS X Lion v10.7.0 or later
    Mac OS X Snow Leopard v10.6.3 or later
    Mac OS X Leopard v10.5.8 or later
                    Note: Mac OS X Tiger v10.4.x is not supported in this version of Parallels Desktop.
    Hardware Requirements
    A Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor.
    Minimum 1 GB of memory, 2 GB of memory is recommended.
    About 500 MB of disk space on the boot volume (Macintosh HD) for Parallels Desktop installation.
    About 15 GB of disk space for each virtual machine.

  • How to install Windows 95 on Snow Leopard

    Is it possible to install Windows 95 on my computer? BootCamp says I need to install XP (which I have) but I have a large collection of children's games for Win95 that I would like to install for my son to use. Hope you can help!
    Thanks,
    Lizzy

    If you wish to use Win95, then you cannot use Boot Camp. But you can use virtualization software such as Parallels Desktop or VM Fusion. See the following:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
    2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
    3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
    5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
    6. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
    See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.
    Boot Camp is only available with Leopard or Snow Leopard. The Boot Camp Beta that was used with Tiger has expired and is no longer available for use. So contrary to the other poster's comment, Boot Camp isn't truly "free." You must purchase Leopard or Snow Leopard to get it.

  • Installing Windows WITHOUT Boot Camp

    Upgraded my MB to a 250Gb HDD and now have the room to run Windows. I'd use Boot Camp, but I have the HDD partitioned in two and BC requires a single partition. Since I prefer the separate partitions, can I do the following?
    1. Backup everything
    2. Erase second partition and divide remaining space into two new partitions (resulting in 3) one of which is for Windows
    If so, how would I install Windows on the third partition? Can I just boot of the Windows CD and be very careful to install Windows on the 3rd partition?
    And yes, I have the Mac driver CD ready.
    Thanks for your help

    As it turns out, you don't. I simply backed my drive up, partitioned it into three, restored Tiger to Partition 1, my photos to partition 2 basically just a data drive) then installed Windows on partition 3. I can boot to it by holding Option on bootup and I can also run it in a VM using VMWare Fusion. Looks like Boot Camp is just a way to do it for those unfamiliar with partitioning, etc. I'm guessing decades running PC's told me it was doable. May also have given me somehow know-how that I applied without really thinking about it. Dunno.
    Bottom line: Boot Camp is NOT required to run Windows natively on a Mac. Nevertheless, I thank you both for your comments
    PS rEFIt was not necessary either

  • Install Windows XP on External Hard Drive

    Is there anyway I can install Windows XP on my WD 500GB External HD? It serves as my Time Machine for my MacBook, which doesn't have a whole lot of HDD space left. I'd like to install XP and be able to run it on my Mac, but it takes up way to much space.
    If I can't install XP to my external drive, is there any suggestions for clearing space on my MacBook? Any way to remove unwanted applications?

    Jerid Lucas wrote:
    I don't quite understand your answer, or maybe you don't quite understand my question. Here are a little more details.
    I have an Early 2008 Macbook with a 160GB HDD with Tiger installed.
    For BootCamp you need OSX Leopard since the BootCamp Beta from OSX Tiger no longer works.
    I'm interested in running Windows XP on my MacBook, but I'm concerned with it taking up space on my already small HDD. However, I do have a 500GB external HDD that I have plenty of space on.
    My question remains, is there anyway that I could install Windows XP on my external drive while keeping Leopard on my laptop HDD. Would I be able to use BootCamp to assist me. If not, how would I access/boot XP?
    See my first post. Windows is not intended to be booted of an external harddisk.
    This is prevented by Microsoft and BootCamp can not change this.
    Windows XP itself needs about 10GB of harddisk space. Add to that the amount of disk space that will be used y the Windows programs you want to run plus the space used by the data files.
    So something about 20-25GB for Windows might be sufficient.
    How much free disk space do you have right now ?
    What is 'eating' up your disk space ?
    I know these are several questions, and difficult ones at that, but I believe there is an answer somewhere.
    The answer is given, but the technical limitations of Windows prevent the answer from being what you want to hear.
    Stefan

  • Has Anyone tried running Windows Apps on Tiger/Leopard using Crossover?

    Hi,
    I had heard that you can run some Windows applications using a program called Crossover.
    Has anyone tried Crossover?
    I need to run Qimage on my MacPro

    It does work, but it can only run programs that have been converted for use with CrossOver. You need to check their site information on whether the program you want to use is available in converted form.
    CrossOver hasn't been verified for 10.5.2, although it is certified for 10.5.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
    2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
    3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
    5. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
    See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.
    Boot Camp is only available with Leopard. The Boot Camp Beta that was used with Tiger has expired and is no longer available for use. So contrary to the other poster's comment, Boot Camp isn't truly "free." You must purchase Leopard to get it.

  • Leopard not Installing Window Drivers

    Hi, I recently upgraded from Tiger to Leopard. I then tried to install Windows Professional using Boot Camp. I was successful with the Windows installation. However, when I insert the Leopard DVD to install the Windows drivers nothing happened. I tried double clicking the DVD from the D drive in Windows but there was no files to install. Is there a step I am missing ? Please help. Thanks!!

    Hi The Hatter, Thanks for your response. I do have boot camp in the utilities. I am at work now so I can't try this until I get home but here is another suggestion I received.
    right-click the DVD drive in Window XP, and choose Show Windows Files rather than Show Mac Files. , the setup for Windows drivers will appeared.
    Is it the D drive they are talking about? or do I click on or do I rigth click on the DVD itself? I will try it and repost.

  • Cannot install windows 8.1 on imac 5k - apple support says "Correct, that machine can't install windows" Boot camp fail

    I have a brand new imac 5k, with 4ghz i7, 295x GPU, 3.1TB fusion drive.  Bought the machine so I could dual boot - I need windows for VR Dev work.
    I've spent the last week and a half on tech support calls with Apple Senior Tech agents, and Microsoft agents as well, and today have been told that indeed this machine cannot run windows 8.1.  Apparently Apple engineering knows about the issue, but says the problem is microsoft's.  Ugh.
    The latest iteration of the issue comes when installing 8.1 onto an external thunderbolt SSD (without even using boot camp) - I go through the EFI installer, convert the drive to GPT, format it as ntfs, but when I select the partition to install onto, the installer says it can't find the partition it just created.  Smuh? 
    I've also tried the install through boot camp.  This installation actually worked twice, but the install was unstable.  After booting back into osX, then returning to Windows, the windows install went corrupt and couldn't be repaired.  Subsequent attempts to install windows yielded a flurry of different errors, including "windows doesn't support GPT in this mode" or "the disk is locked, please unlock the disk" or "MBR must be converted to GPT" (where once I converted to GPT, the drive could no longer be found, despite the operation completing successfully.)
    At any rate, it's a huge mess.  I'd happily return the machine for a different config, but the company I bought it from will only swap it for a similar model -- so I've spent a pile on a machine that does not function as advertised; apple says "too bad, talk to Microsoft." Microsoft says "too bad, we've never seen this, this is an apple issue."
    Has anyone out there gotten windows up and running on an iMac5k with fusion drive?  If so, did you have to go through a crazy maze to make it work?
    Any help is appreciated.
    Thanks,
    MC

    Michael Conelly wrote:
    After much gnashing of teeth, and a half dozen support calls, I'd all but given up.  I finally seem to have solved this though - sort of - by installing windows 8.1 on boot camp on an older iMac, then cloning the bootcamp disk to an external thunderbolt drive via Winclone.  That worked seamlessly, sticking to winclone's instructions, and I can boot via EFI to Windows 8.1 on the new iMac.  So far so good.
    I usually install W8.1 via EFI by using DU and a Free Space partition. The 3TB Fusion is first split into the underlying SSD/HDD physicals. OSX and Windows OSes are installed on SSD via EFI (no BCA). The OSX part and half the HDD are then used to create a new CS volume. The other HDD half becomes NTFS for non-Windows OS files. The Hybrid MBR method is completely unsatisfactory with the 3TB Fusion drive.
    How is the TB/Winclone image for performance of the OS (since pagefile.sys is also on the TB)?

  • Install Windows 8.1 Pro on Mac Mini Late 2014

    I'm trying to install Bootcamp on my Mac Mini.  Windows reports that it cannot install or create a partition on the drive after formatting the BOOTCAMP partition as NTFS.
    This is my setup:
    1. Mac Mini Late 2014 with 2TB Fusion Drive.
    2. Windows 8.1 Pro x64 full version ISO downloaded from Microsoft Store.
    3. Sandisk Extreme Flash Drive (I have tried both 16GB and 64GB).
    4. Bootcamp partition = 500GB.
    5. Other USB devices plugged in: Corded USB Mouse and Apple Extended Keyboard (both of which are required to enter the serial number and navigate the installer window).
    6. No additional storage devices of any kind are connected aside from the internal Fusion drive and the installer drive.
    7. Booting from the EFI portion of the Bootcamp created Windows installer.
    I have read that I should try using a USB 2 flash drive rather than a USB 3 flash drive, so I will try that next.  I fail to understand how this could make any difference.
    If you have any other tips, please let me know.
    I have installed or helped other people install bootcamp many times over the course of the past 2 years.  Every single time it has caused endless headaches and literally weeks of wasted time.
    I have read endless posts on what is causing these problems.  I will consider summarising these for anyone else having the same problems.  Everyone has their theory so far about this Bootcamp nightmare, but so far there doesn't appear to be any one magic solution.
    Apple's inability to address the issue suggests that the problem may be with the Windows installer.  Perhaps Microsoft is deliberately causing this?
    I suspect the two most likely causes of these issues are the downloaded ISO or the Thumb Drive.
    If you have any better idea, please let me know.
    On another topic, how to I rename the NTFS partition back to BOOTCAMP?  All options to rename this partition are greyed out in Disk Utility...
    Cheers,
    Paul

    Paul@Sydney wrote:
    7. Booting from the EFI portion of the Bootcamp created Windows installer.
    The FAT32/NTFS partition is usually not adequate for an EFI install. You can delete the BCA-created partition and create a Disk Utility partition which is formatted as Free Space. This will be split into an MSR and MSD. Fusion drives create problems, especially if the BC partition lies outside the traditional MBR 2TB boundary.
    Before you delete the BCA-created partition, please post the output of
    diskutil list
    diskutil cs list
    sudo gpt -vv -r show /dev/disk0
    sudo gpt -vv -r show /dev/disk1
    I have read that I should try using a USB 2 flash drive rather than a USB 3 flash drive, so I will try that next.  I fail to understand how this could make any difference.
    Windows installers up to W8.1 do not have USB3 drivers. These are installed after Windows is installed and BC drivers are in place.
    Apple's inability to address the issue suggests that the problem may be with the Windows installer.  Perhaps Microsoft is deliberately causing this?
    The requirements are pretty strict when installing Windows. Any deviations cause headaches and grief.
    I suspect the two most likely causes of these issues are the downloaded ISO or the Thumb Drive.
    The USB is usually the issue.
    On another topic, how to I rename the NTFS partition back to BOOTCAMP?  All options to rename this partition are greyed out in Disk Utility...
    After Windows is fully installed and BC drivers are in place, log into Windows, right click on it and rename it on the Windows side. It cannot be renamed on the OSX side with diskutil renameVolume. Here is an example sequence. You cannot rename volume during the installation process.

  • How do I install Windows 8 on Mountain Lion (mac mini) 2010 Server using bootcamp with out Optical Drive?

    I have a 2010 Mac Mini server running 10.8.4 (12E55).  I just bought a brand new copy of Windows 8 from micrsoft.  I have tried using boot camp and it will not recognize a burned DVD in my remote optical drive on my laptop running windows 7 or my macbook running Lion 10.7.5.   I have had Microsoft on both of my computers remoted in for about 8 hours and they tried just about everything that I've tried.
    Microsofts tech support has made me a bootable DVD and a bootable Flash Drive through remote desktop (awsome good job microsoft tech support).  I have even tried formatting my mac mini's second 500GB hard drive to FAT32 using this whole disc as my windows partition.  I know that when I go to install windows 8 it is going to reformat the drive to NTFS but all the articles that I've found, say this is what you have to do to get the drive formatted properly to get the ball rolling and get windows will fix it when it goes to install by reformatting to NTFS. 
    Ok so right now I have my second 500GB hdd on my mac mini formatted to FAT32 and I have tried to reboot holding my option key like I do on my mac book.  If I want to boot to a different hdd on my macbook all I do is hold the OPTION key during start up and you get prompted to choose one of the bootable disc that is on your computer.  Well if I put my USB drive which is bootable on my macbook into my macbook and do this right now its not showing up. 
    Now I just put the DVD that they made me in my macbook and it shows up as bootable disc.  But the USB doesn't.  (1 hour later)  I just got microsft to remake the USB drive and am going to try that again so ta ta for now and I'll come back on to post to tell you if it works.

    mikkel-kj wrote:
    These apps paralells and fusion and virtualbox, are they in Mac App Store? And when I have the app installed what then, now it ain't only bootcamp what shall I do now to install windows 8?
    Mikkel
    Parallels, Fusion, and VirtualBox are available from their respective sites. Read their installation instructions which explain how to install Windows.

  • How do I install windows from USB on Macbook pro 3,1

    How do I install windows from USB on Macbook pro 3,1 ?
    My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
    - My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
    I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
    Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
    Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
    After rEFIt I booted and then I got this error:
    Starting bootmgr.efi
    Error: Unsupported while loading bootmgr.efi
    I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
    Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
    Point: Nothing is wrong with the windows software, and windows runs fine.
    I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
    Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
    Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
    rEFIt - Booting Legacy OS
    Starting legacy loader
    Using load option ´USB´
    Error: Not found returned from legacy loader
    Error: Not found from LocateDevicePath
    (x 9 times)
    Error: Load Error while (re)opening our installation volume
    The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
    (Hey Apple please send out a updated firmware that fix this issue?!)
    So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ?  Or just run windows on the mac and forget about mac software ? What a stupid solution...

    There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
    This is 5 page thread, so a little more 'meat' to it:
    https://discussions.apple.com/thread/3410900?start=60&tstart=0
    And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
    What you have here seems to be everything and everyone is excluded unless there is a  mac-model device ID string that specifies yes.  An unnecessary hurdle.

Maybe you are looking for