Installing Windows XP pro from a ZIP file

Hi,
I bought a OEM copy of windows XP pro. It comes in a ZIP file. Is there a way to install it using Bootcamp directly or must I first create a CD with this file?
Also, is there a difference in using the 64 bit version instead of the 32? Which one is better?
Thanks
This is for a Macbook Pro 4GB RAM 250 HD, brand new and for an IMac 4GB RAM, 500 HD also brand new.

Boot Camp will require you use a standard bootable installer disc, not an upgrade disc. From the Boot Camp documentation (you did read it, I hope:)
Important:
You must use a single full-install Windows installation disc (Service Pack 2 is required for Windows XP installations). Do not use an upgrade version of Windows and do not install an earlier version of Windows XP and attempt to update it later to SP2. Use only 32-bit versions of Windows.

Similar Messages

Cannot install Windows 7 Pro; gets stuck on "Starting Windows" screen

I have read dozens of posts on this topic but none has helped yet.
My system has Windows 8 with UEFI. I want to install Windows 7 Pro on another partition. I have turned off Secure Boot in the UEFI/BIOS. When I try to install Windows 7 Pro from a DVD it shows "windows is loading files" and then gets stuck on "Starting Windows"
for ever. This happens even when no USB peripherals are attached.
I have already wasted many days on this. I hope someone can help.
Thanks!

Hi friends of the internet
I have been reading several forums regarding the issue of installing windows 7 (64 bit) to a computer that have had windows 8 installed previously or just a GPT formatted disk.
My Case:
Windows version installed: Windows 7 Professional N with Service Pack 1 (x64) or Windows 7 Professional (x64)
Computer used: Samsung laptop
Model Code: NP53U4C-A02SE
See the specks here:
http://www.samsung.com/dk/consumer/computer-peripherals/notebook/notebook/NP535U4C-A02SE-spec
Create a USB install disk that not freezes at ”starting windows” screen:
First I followed this great guide (Thanks Daniel):
http://
hodgin.ca/2012/10/02/creating-a-uefibios-windows-7-usb-and-installing-to-gpt-partitions/
STOP AFTER STEP 13!
1. Open a command line in administrator mode
2. run DISKPART
3. type LIST DISK
4. Look for the disk number that represents your USB drive
5. type SELECT DISK # where # represents the number of your USB drive. Get this right or you will wipe a different drive out.
6. type CLEAN
7. type CREATE PARTITION PRIMARY
8. type SELECT PARTITION 1
9. type ACTIVE
10. type FORMAT fs=fat32 quick
11. type assign
12. The drive should now be formatted and marked as active and fat32. Do not format the drive as NTFS or you will only be able to boot into the installer in BIOS mode.
13. Now you will need to copy the contents of the windows 7 install dvd to the USB with a regular copy paste from windows explorer.
Here comes a very weird hack... I do not know why it works, but I think it is all about flash drive data structure. I did these steps on a win 7 prof. computer.
(Let’s assume it’s drive E:)
Make a copy of your e:\efi\microsoft folder to e.g. your desktop.
Delete the e:\efi folder
Copy the \efi folder from a windows 8 installation disk (I used Windows 8 (x64) Professional) to the e:\efi folder. Sorry I cannot provide this for you.
Here comes the weird part. Then delete e:\efi\microsoft you just copied from the win 8 installation disk.
Copy the \microsoft folder form the desktop to e:\efi\microsoft
Resume the guide from step 18.:
http://
hodgin.ca/2012/10/02/creating-a-uefibios-windows-7-usb-and-installing-to-gpt-partitions/
18. Insert the USB in the machine and turn it on and boot into the UEFI/BIOS loader and check for boot options. On the ASUS Zenbook it detected two boot options on the USB drive. One was UEFI and one was regular BIOS. I made the
UEFI option the first choice and restarted the machine.
My bios setup was:
Secure Boot = Disable
OS Mode Selection = CSM and UEFI OS
Boot Device Priority = I made the UEFI option the first choice and restarted the machine.
The installation should start normal.
E.g. See this guide:
www.sevenforums.com/tutorials/186875-uefi-unified-extensible-firmware-interface-install-windows-7-a.html
What I did was:
Select custom installation (Advanced).
Click Drive options (Advanced).
Delete all partitions (this might not be needed). When I did not delete all partitions I was asked every time after the install, during start up by the windows boot manager to select ether win 8 or win 7.
Click new (DO NOT make Changes in the size of the disk), apply, see NOTE!
Edit the Primary partition as you want it e.g. divide it to more partitions.
Select the one you will install windows on and do a normal install.
I do not make changes in the Bios after install. The Boot priority is automatic set to “Windows boot manager”. If I change the boot mode back to OS Mode Selection = UEFI OS, the computer will freeze at the “starting windows” screen again.
All this worked for me, good luck. There might be more to it, but this is a start.
By the way, the start up time for a MBT install was 37 s. And for the GPT it was 49 s.
Remember if we stand on each other’s shoulders we will reach higher
J.
NOTE: Here the installation program should create three partitions automatically!
Partition 1 - System - The EFI System partition that contains the NTLDR, HAL, Boot.txt, and other files that are needed to boot the system, such as drivers.
Partition 2 - MSR - The Microsoft Reserved (MSR) partition that reserves space on each disk drive for subsequent use by operating system software.
Partition 3 - Primary - Where Windows is to be installed to.
If this isn’t the cast you are not installing in UEIF mode. To check for this (thanks again Daniel):
If you need to find out if you have booted into BIOS mode or UEFI mode when the installer starts you can press SHIFT+F10 when the welcome installer shows up to open a cmd prompt. from here you will likely be at X:\Sources. Type cd .. to
go back a dir and move into \Windows\Panther\
Then type notepad setupact.log
Within this file do a ctrl+f and search for
Callback_BootEnvironmentDetect: Detected boot environment:
It should either say BIOS or UEFI.
To check if your disk is in the GPT format.
Open the command prompt.
Type: DISKPART
Type: List Disk
See for the star (*) in the GPT column

How to install Windows 7 Pro 64bit from a Retail DVD

Good afternoon
I have got a Lenovo X201 which unfortunately cannot locate a recovery disc
I mtherefore purchased a retail version of Win7 Pro 64 bit and put into my external DVD player to install
I changed the boot option to look at the wxternal dvd and it start to work but when i get to aprox the screen saying copying files the computer shuts off
Do you know how i can get round this issue of installing Windows 7 Pro 64 Bit
I even tried downloading the Lenovo Windows 7 Pro 64 bit iso and the same result
Many thanks

The X201 does not have UEFI bios.
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

Hello, I am attempting to install Camera raw from a .zip file provided via a link provided by adobe for a Nikon D810. The .zip file unzips fine and I moved the files to the recommended folder. But the operation is failing

I am attempting to install Camera raw from a .zip file provided via a link provided by adobe for a Nikon D810. The .zip file unzips fine and I moved the files to the recommended folder. But the operation is failing

Can you describe what “the operation is failing” means? What is happening and how is it different than what you expect?
Also, what product are you trying to update manually, and do you have a link to the page of instructions, so we know what your attempting to do?

No sound after installing windows 8 pro 64bit (macbook pro 2011)

I installed windows 8 pro edition (64bit) on my mackbook pro and after installtion i run bootcamp 5.0.5.33 everything working find but only sound card not installing i have a red cross sign on my speaker in taskbar.
after trying alot of things like reinstalling windows, audio drivers etc. but no success.
then once again i downloaded boot camp 5 with bottcamp assistant from my mac but still not working.
any idea?
i am totaly dead ......:(

people repport the drivers that bootcamp tool on osx creates include newer drivers then the 5.0.5.33 zip file from their web site

Install Windows 7 Pro 64bit on MacBook Pro 15" Mid 2014

Trying to install Window 7 Pro on my new MacBook Pro 15" Mid 2014. I went through the following:
Attempt 1: Downloading the latest bootcamp support drivers, copied on flash drive and used BCA for partitioning. Booting from Ext. DVD with USB pin drive containing the drivers inserted
Attempt 2: Using ISO to create a bootable USB pin drive with bootcamp support drivers on the same..
Both attempts ended being unable to pass Windows 7 language selection screen. Mouse/Trackpad/Keyboard are not working.
Windows 8.1 pro works fine, but I'm not very happy with it..
Any advice?

The primary challenge is due to absence of proper drivers on the W7 installer to support the USB ports. One thing to check is if the USB is a USB2 or USB3. USB3 pen drives will not work.
You should also try Attempt 2 using all available USB ports available, one at a time. Disconnect any other peripherals other than KM and USB before you start installation. BT devices are not very stable when used.
If you can see any files in the Bootcamp volume from the OSX side, look for installer logs for details.
find . -name setupact.log -print
./Windows/Logs/DPX/setupact.log
./Windows/Panther/setupact.log
./Windows/Panther/UnattendGC/setupact.log
./Windows/setupact.log
./Windows/System32/sysprep/Panther/IE/setupact.log

Installing Windows XP Pro on Bootcamp

I'm new to the imac and this is the first time that I have used one. I'm trying to install Windows XP Pro with service pack 3. I also have a version of Windows XP Pro with service pack 2.
In total I have three Windows XP Pro disks which I have tried installing on Bootcamp but without success. All three versions are full versions and not upgrades. One version is an OEM with service pack 2 and the other two versions are volume licenses with service pack 3.
I've performed all the software upgrades before doing the installation as advised. My hard drive is 640GB and I am allocating 100GB to the Windows partition, so I'm going to choose NTFS as the format of the partition.
When I try the installation with the OEM disk I don't get the agreement screen or the screen where you choose the format of the partition i.e FAT 32 or NTFS. During the installation I can get as far as the files being copied to the windows folder, then I get an error message saying that a file cannot be copied, it's not the same file each time. If I'm lucky and it does copy all the files at this point it then reboots itself and I then have a plain black screen saying that an error has occured and the whole thing just freezes.
When I try the installation using either of the volume license disks I get all the screens as shown in the instruction guide but I only get as far as the files being copied to the windows folder, but it never gets to the 100% completion stage and I have to press F3 to exit the installation, then when it reboots it just freezes. Each time when it's copying the files you can hear the DVD drive start to slow down and finally grind to a halt.
This is as far as I ever get with the installation. Can anyone help me with this problem?

I don't have a definite solution. I had much the same problem early on.
The nearest I could get to the problem was that the Superdrive may have been slightly off calibration.
Then I thought if it's a calibration problem, and it seems a bit different each time I try to install from the Windows DVD, then there is another problem possibly related to the Superdrive.
It was all trial and error and took many hours to resolve but I did overcome it.
The Superdrive was over heating. Your iMac is constructed way differently to my troubled Mac Pro but the same scenario could still be possible. So I suggest that ways be found to cool the iMac, maybe with an external fan blowing on it or installing SMC Fan Control, or both.
Oops, SMC Fan Control runs under the MacOS so it will be useless when Windows is booted and installing from the DVD. External cooling is your best bet if overheating is the problem.
Good luck Linda.

How do I install windows 8 pro with osx 10.9 Mavericks?, How do I install windows 8 pro with osx 10.9 Mavericks?

Hello everyone I just purchased a brand new mac and I am trying to install windows 8 pro using bootcamp assistant. I get through almost the entire install when i get an error message that says "installation cannot proceed files missing" something like that...
my windows 8 pro is brand new and I downloaded osx mavericks from the app store has anyone else had this problem can anyone help me????!?!?

Hi. Because both Mavericks and Windows 8 are still new, they may not be free of error. Apple needs more time to perform more tests to ensure that these two different OS's will work properly without getting in conflicts. If it's posdible, I highly recommand you to downgrade back to Lion or Mountain Lion and install Windows 7 (if you have a copy of it). In my experience, all advises from Genius Bar members and computer articles confirm that Windows 7 will work on Macs with Lion OS. It should also work on Mountain Lion. Besides Boot Camp, you could try to virtualize Windows OS and its applications by using VirtualBox, CrossOver and other VMs. I already have an Oracle VirtualBox but I would like to try Boot Camp since it allows me to enjoy almost all Windows features that may be limited in VMs.

Install Windows 8 Pro on Mac Air

I installed Windows 8 Pro, upgrading from Windows 7. Once this upgrade, just notice that the sound not working, Function (Fn) keyboard to adjust the screen, volume (F1-F12) not working, along with others Drivers Error at device Manager.
Herewith the Step for those who have the same problem at least to get the sound works, and some annoying drivers devices error.
Requirements
1. Run Your Mac OS, go to Bootcamp and download the Bootcamp.
2. Stored your files at External Harddrive, or USB Stick
3. Boot into your Windows 8
to Fix for the Sound
- Install Cirrus
- Drive: \WindowsSupport\Boot Camp\Drivers\Cirrus\
SM Bus Driver
- Open Your Device Manager
- Locate the drive to Drive:\WindowsSupport\Boot Camp\Drivers\NVidia\
- it fill find "it will update NVIDIA nForce PCI System Management"
Coprocessor Driver
- Open Your Device Manager
- Locate the drive to Drive:\WindowsSupport\Boot Camp\Drivers\NVidia\
- it will find "NVIDIA nForce System Management Contorller"
iSight
- Open D:\WindowsSupport\Boot Camp\Drivers\Apple
- Install AppleiSightInstaller
This should fixed all the driver issues and Sound and get the Windows 8 working nicely, except for
- one annoying error message "Bluetooth USB Host Controller" in the device manager. Not sure what the impact.
- Keyboard Fn Function.
thats all i can share. Hope this helps.
regards
INX

Apple has not announced support for Windows 8 yet.
Allan

Unable to install Windows 7 pro after restart by Boot Camp Assistant

Hello,
I have an issue with installing windows 7 pro 64bit on my MBP 13" mid 2009.
It has 500GB Samsung HDD.
I tried to install windows 7 on a boot camp partition with boot Camp assistant and also during the process, I
downloaded the driver helpers from apple website and burned it on dvd. after system restart, It starts to load windows
files and then asks me to give it the cd of drivers [ right after I select the country and language in the start of the setup ]
I tried to select the files of the cd [ which I burned by the boot camp assistant ] but it just keeps telling me there is
NO suitable driver matches my mac.
I have downloaded the genuine windows 7 and burned it on dvd.
Also I have Lion, Boot Camp 4.0.1
Can someone please help on this issue?
Many thanks,

The partition table needs to be repaired.
That is why the guide asks to backup before you begin.
Try Lion Recovery and check health of all the partitions.
Sometimes repairing or try shrink and expand the partition.
But it is not uncommon for what happened to you to render the drive with smaller HFS and then require erase the drive in some cases and restore.
Carbon Copy Cloner 3.4.2
Cloning as a Backup Strategy
CCC is now able to also clone Lion's Recovery Partition as well.
Check partition table health in Lion's Disk Utility
Create Lion Recovery Drive
Lion Recovery Mode

T43 IBM Thinkpad, I installed Windows XP pro on a new harddisk, found no netowork

T43 IBM Thinkpad, I installed Windows XP pro on a new harddisk, found no network, so installed drivers for the chipset and network. Still no way to go on inernet.
Folloing drivers i installed from following site. What do I do now:
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT035703
Oss50w – chipset driver
7ora09ww – Ethernet driver
1ywc54ww – wifi driver

Hi guys and thanks for your help. Yes, after authenication and working on this Windows partition, I have less than 3GB space. Also, I cannot drag and drop files from desktop, like a text file into the Windows partition. Says it doesn't have permissions to drop files.
It looks like now I will in fact have to start from scratch and repartition the HD but put in a minimal 12GB or so into the Windows partition. Also, I tried to name the Windows label, but it's locked and under get info, it says the Windows partition is read only, ownership grayed out and says it is NT coded format. Shouldn't that be MS-DOS or FAT 32 automatically?
I have to tell all of you that this is getting time consuming, too complicated and when I get my own ProBook, I have no desire to install VISTA or MS whatever. Plus, we have to still do the MS security pack updates and install virus software for the Windows partition, isn't that correct?
Is there a step by step link here like a BootCamp/Windows XP Pro installation tutorial so I can move a bit faster on my next attempt?
Thanks SteveB

Some issues after clean installing windows 7 pro 64bit

Hi,
I have a couple of issues, I clean installed windows 7 pro, 64bit, (vanilla) restored my license with ABR and used system update to download all the drivers. (no issues until here) But after restarting the system, I found this issues:
1. I have to put the bios in legacy mode for system to boot. Otherwise it gives me a "no operating system found" message. Is there any way to make a proper installation for the system to boot in UEFI and LEGACY?
2. System update didn't install thinkvantage center. (the program that stays in the taskbar). Should this be installed manually? Or system update should have installed it?
3*. I can not use lenovo driver page of my x120e. In IE it shows me repeatedly the wizard to choose my model, although I enter the correct info there. It starts all over again and again. Tried opera, I can see the drivers page, but I can't browse, or expand none of the sections. (all I can think of this, do I need java for the page to work?)
3*. UPDATE: After installing IE 9, java and flash player, still not working. Opera too. Google Chrome works fine. What's the matter with IE and OPERA? What component do I need to make IE work with lenovo drivers download page?
Can anyone help me? Never had to deal with these issues.
Thanks in advance
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

Hello,
Have you tried wiping the hard disk drive and reinstalling Windows 7 Professional x64 from the factory recovery discs while the BIOS is set to UEFI? If so, did that work?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Boot camp not recognize keyboard and mouse when installing windows 7 pro 64 bit

Hi,
I have some issue when installing windows 7 pro 64 bit using boot camp. after done partitioning the windows drive and when boot to windows installation process, i've got stuck in the first screen when choosing the language. it seems that the keyboard and mouse are not detected.
i'm using boot camp ver. 5.0.
does anyone have similar problem with me?

I have finally successfully installed Windows 7 x64 on MacBook Air 13.3" (2013) thru Bootcamp.
Problem: After Windows 7 install thru BootCamp, I got to the first login screen and not input devices (Mouse, keyboard, USB) worked. I tried to boot into Windows Safemode, but I received the error "Windows can not complete installation in Safe Mode".
Cause: WIndows 7 does not have native USB 3.0 drivers, included on the install images.
Resolution: I downloaded the latest device drivers with thru BootCamp and copied them to the USB Flash Drive that had my bootable Windows 7 x64 install on it. The second option in BootCamp is "Download Support Media". This does more than just download drivers. It creates a file called "autoattended.xml". This is key as it tells Windows during the install process to use the device drivers that you download. Otherwise, you need to do it manually, which you can't because you have no mouse or keyboard.
NOTE: I had no need of a super drive because I had all the files on one USB flash drive. Therefore, I don't think it matter which side of the MBA the USB drive was plugged in, as other solutions suggested.

Unable to install windows 8 Pro (64bit) on R61, 7755jm1

I have an old thinkpad, the R61 series, model 7755JM1.
And I tried to install windows 8 pro (64bit) on it, hoping to have a taste of the new OS's touch features through remote control on my tablet.
However, the installation has never been successful.
I was able to finish the installation process. Yet whenever it starts to "setup my device", it was never able to finish, and it usually stopped at 65% or 84%.
then my thinkpad would restart on its own, and threw an error message telling me my computer is restarted unexpectedly and the installation is not succeful, also suggesting me try to install again.
This is very frustrating. I have checked on intel's website and other online sites that my CPU (core 2 dual process T8100) supports intel64, and execute disable bit (in my BIOS I think it is by name of "execution prevention"), and sse2, sse3.
In my BIOS, I enabled execution prevention, set SATA mode to "AHCI", and enabled "extended memory test". I format the partition every time I tried to install.
I have installed windows 7 pro on my thinkpad before, and it was just fine.
Do anybody have any idea what is going and how should I solve this?
Many thanks.
Lee.

Hello,
According to the Lenovo, the specs for your R61 (MT: 7755-JM1) as it shipped are as follows:
T8100(2.1GHz), 1GB RAM, 160GB 5400rpm HD, 14.1in 1400x900 , 128MB nVIDIA Quadro NVS 140M, CDRW/DVDRW, Intel 802.11agn wireless, Bluetooth, Modem, 1Gb Ether, UltraNav, Sec Chip, FPR, Camera, 4c Li-Ion, WinVista Home Basic 32.
As you pointed out, the T8100 is a 64-bit CPU, so there should be no problems with that. I did notice that the unit originally shipped with 1GB of RAM, though.
From looking at Microsoft's Windows 8 System Requirements page, I see that 2GB of RAM are required for the 64-bit edition of Microsoft Windows 8, so if your R61 only has the original 1GB of RAM in it, it will need to be upgraded..
The R61 officially supports 4GB of RAM in the form of two 1GB PC2-6400 800MHz DDR SO-DIMM modules, and apparently can unofficially be upgraded to 8GB using two 4GB modules with the same characteristics.
If you already have 2GB (or more) of RAM installed, the other suggestion off the top of my head is to make sure you have the latest version of the BIOS firmware installed:
Name: BIOS Update Bootable CD for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP, 2000 - ThinkPad R61, R61i 14.1 inch widescreen with IEEE 1394, ThinkPad T61, T61p
URL: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013943
Version: 2.30-1.08
Released: 02 Apr 2012
If the issue still occurs, please let us know and we can try and help you troubleshoot it further.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please

I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.

Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS.

Installing Windows XP pro from a ZIP file

Similar Messages

Maybe you are looking for