Installing Windows Xp Pro NEED HELP!!
I have a lenovo 3000 n200 0769 and it has no OS and the hdd is completely clean (it is ntfs formatted). When attempting to install windows xp pro the cd won't self boot (the drive is functioning properly as far as i know). Additionally, i get to the phoenix screen and it remains there. if im not quick to press the lenovo care button the notebook wont respond to anything. It does give me the options of pressing esc to resume normal startup, F1 to enter bios setup, F11 to diagnose hardware or recover system (which i have tried with the cd inserted but it only takes me to a black screen) and F12 to choose a temp startup device (which also takes me to a black screen) I am able to access the bios setup once the screen turns on by pressing esc then F1 if that helps anyone in aiding my efforts but other then that i can't do anything with the notebook. Could it be something wrong with the bios?
Message Edited by Twizz08 on 08-13-2008 03:05 PM
Hi !
On boot, press F1 just when the Lenovo logo shows. Navigate to the BIOS boot options and set the system to boot first on the CD device.
Save and exit BIOS. The system should boot on the CD.
If not check either the disk drive (faulty or not ? ) Bios passwd, try to have a USB stick (bootable with some software into it ) and try to boot from it (using F12) .
If nothing works, It may be the mainboard or something like that faulty....
I use a 0769 laptop with vista wiped out for Windows XP so it is feasible. (difficult as the disk is SATA and not IDE so you need a tweaked Win xp install CD)
Similar Messages
-
I had macbook pro and would like to install windows OS in it. I had install desktop parallel and need help which windows version is suitable. Windows vista, 7 or 8 and either 32 or 64 bit.
The answer is it depends on which model of MacBook Pro you have. This article has a table that shows you which versions of Windows you can install.
http://support.apple.com/kb/HT5634 (click 'MacBook Pro') -
I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc. -
I installed windows 8 Pro to my Mac 27', however am having a hard time to pair apple wireless keyboard with windows 8 pro. Can anyone help?
one have to go to osx and to it's bootcamp app
and make an usb stick with the apple drivers for windows
then one have to install them in windows to get the hardware working ok -
Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please
I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.
Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS. -
Can't install Windows 7 Pro x64 - device driver missing - can't eject DVD
Hello,
I am trying to install Windows 7 Pro x64 - I create the partition in boot camp and start windows install process. **During the Windows install process**, it says "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: if the Windows installation media is in the CD/DVD drive, you can safely remove it for this step".
Apparently the drivers are on the OSX install DVD. But, there is no way to eject the windows DVD! Why on earth is there no manual eject on Macs? Is there another way to eject? I tried to put a paperclick in the slot next to where a CD is inserted but it didn't do anything. Is there another way to get Windows to see the correct device drivers?
I am all for clean slick designs, but when it does not have all required functionality, it is kind of useless.
I am talking to Mac Support and they can't help.
Looks like I will have to return this Mac, I also need to boot into full Windows (without Parallels or VMWare) to do my work.
dan
Message was edited by: dbpersonYou don't mention what Mac you have, so I'd have to say there is almost no way to help.
IF the 7 Pro x64 came download ISO thru EDU, you have to burn it, and if you use Disk Utility, at 2X reduced burn speed... otherwise it won't work.
A VM isn't fussy and can use ISOs.
If you want both native and VM, to have Windows installed on its own hard drive and use it under OS X, then you have to install it and use Boot Camp Assistant.
I'd say it is all about your DVD media. -
Some issues after clean installing windows 7 pro 64bit
Hi,
I have a couple of issues, I clean installed windows 7 pro, 64bit, (vanilla) restored my license with ABR and used system update to download all the drivers. (no issues until here) But after restarting the system, I found this issues:
1. I have to put the bios in legacy mode for system to boot. Otherwise it gives me a "no operating system found" message. Is there any way to make a proper installation for the system to boot in UEFI and LEGACY?
2. System update didn't install thinkvantage center. (the program that stays in the taskbar). Should this be installed manually? Or system update should have installed it?
3*. I can not use lenovo driver page of my x120e. In IE it shows me repeatedly the wizard to choose my model, although I enter the correct info there. It starts all over again and again. Tried opera, I can see the drivers page, but I can't browse, or expand none of the sections. (all I can think of this, do I need java for the page to work?)
3*. UPDATE: After installing IE 9, java and flash player, still not working. Opera too. Google Chrome works fine. What's the matter with IE and OPERA? What component do I need to make IE work with lenovo drivers download page?
Can anyone help me? Never had to deal with these issues.
Thanks in advance
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.Hello,
Have you tried wiping the hard disk drive and reinstalling Windows 7 Professional x64 from the factory recovery discs while the BIOS is set to UEFI? If so, did that work?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Hello everyone I just purchased a brand new mac and I am trying to install windows 8 pro using bootcamp assistant. I get through almost the entire install when i get an error message that says "installation cannot proceed files missing" something like that...
my windows 8 pro is brand new and I downloaded osx mavericks from the app store has anyone else had this problem can anyone help me????!?!?Hi. Because both Mavericks and Windows 8 are still new, they may not be free of error. Apple needs more time to perform more tests to ensure that these two different OS's will work properly without getting in conflicts. If it's posdible, I highly recommand you to downgrade back to Lion or Mountain Lion and install Windows 7 (if you have a copy of it). In my experience, all advises from Genius Bar members and computer articles confirm that Windows 7 will work on Macs with Lion OS. It should also work on Mountain Lion. Besides Boot Camp, you could try to virtualize Windows OS and its applications by using VirtualBox, CrossOver and other VMs. I already have an Oracle VirtualBox but I would like to try Boot Camp since it allows me to enjoy almost all Windows features that may be limited in VMs.
-
Unable to install Windows 7 Pro SP1 x64
Hi guys,
I have a Dell all in one 2310 and Dell had came out to replace the HDD as it was faulty, now when I try to install Windows 7 Pro SP1 onto the unit it comes up with "Windows cannot be installed to this disk. This computers hardware may not support booting
to this disk. Ensure that the disks controller is enabled in the computer's BIOS menu.
I have checked in the BIOS and the settings seem ok as in the SATA drives are enabled and on AHCI..
When using diskpart to list the volumes it also cannot see the drive,
HELP!!As Rick Dee says, the issue is with the hardware and not related to Windows. Moreover, SATA is in AHCI mode, so more information is needed. It's better to contact Dell technical support, as said by Rick Dee, so that it'll be solved as soon as possible.
The new hard drive may also be replaced, if the situation worsens. Additionally, if the PC is under warranty, Dell technician will assist you in installation of Windows.
Balaji Kundalam -
Unable to install windows 8 Pro (64bit) on R61, 7755jm1
I have an old thinkpad, the R61 series, model 7755JM1.
And I tried to install windows 8 pro (64bit) on it, hoping to have a taste of the new OS's touch features through remote control on my tablet.
However, the installation has never been successful.
I was able to finish the installation process. Yet whenever it starts to "setup my device", it was never able to finish, and it usually stopped at 65% or 84%.
then my thinkpad would restart on its own, and threw an error message telling me my computer is restarted unexpectedly and the installation is not succeful, also suggesting me try to install again.
This is very frustrating. I have checked on intel's website and other online sites that my CPU (core 2 dual process T8100) supports intel64, and execute disable bit (in my BIOS I think it is by name of "execution prevention"), and sse2, sse3.
In my BIOS, I enabled execution prevention, set SATA mode to "AHCI", and enabled "extended memory test". I format the partition every time I tried to install.
I have installed windows 7 pro on my thinkpad before, and it was just fine.
Do anybody have any idea what is going and how should I solve this?
Many thanks.
Lee.Hello,
According to the Lenovo, the specs for your R61 (MT: 7755-JM1) as it shipped are as follows:
T8100(2.1GHz), 1GB RAM, 160GB 5400rpm HD, 14.1in 1400x900 , 128MB nVIDIA Quadro NVS 140M, CDRW/DVDRW, Intel 802.11agn wireless, Bluetooth, Modem, 1Gb Ether, UltraNav, Sec Chip, FPR, Camera, 4c Li-Ion, WinVista Home Basic 32.
As you pointed out, the T8100 is a 64-bit CPU, so there should be no problems with that. I did notice that the unit originally shipped with 1GB of RAM, though.
From looking at Microsoft's Windows 8 System Requirements page, I see that 2GB of RAM are required for the 64-bit edition of Microsoft Windows 8, so if your R61 only has the original 1GB of RAM in it, it will need to be upgraded..
The R61 officially supports 4GB of RAM in the form of two 1GB PC2-6400 800MHz DDR SO-DIMM modules, and apparently can unofficially be upgraded to 8GB using two 4GB modules with the same characteristics.
If you already have 2GB (or more) of RAM installed, the other suggestion off the top of my head is to make sure you have the latest version of the BIOS firmware installed:
Name: BIOS Update Bootable CD for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP, 2000 - ThinkPad R61, R61i 14.1 inch widescreen with IEEE 1394, ThinkPad T61, T61p
URL: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013943
Version: 2.30-1.08
Released: 02 Apr 2012
If the issue still occurs, please let us know and we can try and help you troubleshoot it further.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Hello,
I have a Mac Mini (Late 2012) running on OS X 10.8.3 and would like to install Windows 8 Pro on a secondary hard drive using Boot Camp 5. Is that really possible?
A little background about the topic under discussion.
1. Mac Mini (Late 2012) has a place holder to accomodate an additional hard drive (2.5") under the hood
2. If just plugged with one, it would show as an additional volume in the finder
3. Boot Camp 5 supoprts Windows 8 Pro 64-bit installation
The idea is to run two operating systems (1. OS X and 2. Windows 8) on two hard drives in a Mac Mini, with maintainability a constraint.
Have any one tried this out? If so, kindly share if there are any specific procedures apart form the one given in Boot Camp 5 manual.
Thanks in advance.
~ NareyGotcha!!
I am done with mounting a secondary HDD (thanks to ifixit) and installing Windows 8 Pro 64 bit on it without a worry. Charm, charm!!
Boot Camp 5 guide prescribes all needed steps and when read and used correctly, installation must be an easy task. And all the existing apple hardwares work so good in the Windows environment too.
I am going to help out a friend of mine in doing a similar thing on his mac too. If you got specific questions, please do shoot up here and i should be able to get a reply to it (if at all).
Thanks everyone.
~ Narey -
Unable to install Windows 7 pro after restart by Boot Camp Assistant
Hello,
I have an issue with installing windows 7 pro 64bit on my MBP 13" mid 2009.
It has 500GB Samsung HDD.
I tried to install windows 7 on a boot camp partition with boot Camp assistant and also during the process, I
downloaded the driver helpers from apple website and burned it on dvd. after system restart, It starts to load windows
files and then asks me to give it the cd of drivers [ right after I select the country and language in the start of the setup ]
I tried to select the files of the cd [ which I burned by the boot camp assistant ] but it just keeps telling me there is
NO suitable driver matches my mac.
I have downloaded the genuine windows 7 and burned it on dvd.
Also I have Lion, Boot Camp 4.0.1
Can someone please help on this issue?
Many thanks,The partition table needs to be repaired.
That is why the guide asks to backup before you begin.
Try Lion Recovery and check health of all the partitions.
Sometimes repairing or try shrink and expand the partition.
But it is not uncommon for what happened to you to render the drive with smaller HFS and then require erase the drive in some cases and restore.
Carbon Copy Cloner 3.4.2
Cloning as a Backup Strategy
CCC is now able to also clone Lion's Recovery Partition as well.
Check partition table health in Lion's Disk Utility
Create Lion Recovery Drive
Lion Recovery Mode -
Cannot install Windows 7 Pro; gets stuck on "Starting Windows" screen
I have read dozens of posts on this topic but none has helped yet.
My system has Windows 8 with UEFI. I want to install Windows 7 Pro on another partition. I have turned off Secure Boot in the UEFI/BIOS. When I try to install Windows 7 Pro from a DVD it shows "windows is loading files" and then gets stuck on "Starting Windows"
for ever. This happens even when no USB peripherals are attached.
I have already wasted many days on this. I hope someone can help.
Thanks!Hi friends of the internet
I have been reading several forums regarding the issue of installing windows 7 (64 bit) to a computer that have had windows 8 installed previously or just a GPT formatted disk.
My Case:
Windows version installed: Windows 7 Professional N with Service Pack 1 (x64) or Windows 7 Professional (x64)
Computer used: Samsung laptop
Model Code: NP53U4C-A02SE
See the specks here:
http://www.samsung.com/dk/consumer/computer-peripherals/notebook/notebook/NP535U4C-A02SE-spec
Create a USB install disk that not freezes at ”starting windows” screen:
First I followed this great guide (Thanks Daniel):
http://
hodgin.ca/2012/10/02/creating-a-uefibios-windows-7-usb-and-installing-to-gpt-partitions/
STOP AFTER STEP 13!
1. Open a command line in administrator mode
2. run DISKPART
3. type LIST DISK
4. Look for the disk number that represents your USB drive
5. type SELECT DISK # where # represents the number of your USB drive. Get this right or you will wipe a different drive out.
6. type CLEAN
7. type CREATE PARTITION PRIMARY
8. type SELECT PARTITION 1
9. type ACTIVE
10. type FORMAT fs=fat32 quick
11. type assign
12. The drive should now be formatted and marked as active and fat32. Do not format the drive as NTFS or you will only be able to boot into the installer in BIOS mode.
13. Now you will need to copy the contents of the windows 7 install dvd to the USB with a regular copy paste from windows explorer.
Here comes a very weird hack... I do not know why it works, but I think it is all about flash drive data structure. I did these steps on a win 7 prof. computer.
(Let’s assume it’s drive E:)
Make a copy of your e:\efi\microsoft folder to e.g. your desktop.
Delete the e:\efi folder
Copy the \efi folder from a windows 8 installation disk (I used Windows 8 (x64) Professional) to the e:\efi folder. Sorry I cannot provide this for you.
Here comes the weird part. Then delete e:\efi\microsoft you just copied from the win 8 installation disk.
Copy the \microsoft folder form the desktop to e:\efi\microsoft
Resume the guide from step 18.:
http://
hodgin.ca/2012/10/02/creating-a-uefibios-windows-7-usb-and-installing-to-gpt-partitions/
18. Insert the USB in the machine and turn it on and boot into the UEFI/BIOS loader and check for boot options. On the ASUS Zenbook it detected two boot options on the USB drive. One was UEFI and one was regular BIOS. I made the
UEFI option the first choice and restarted the machine.
My bios setup was:
Secure Boot = Disable
OS Mode Selection = CSM and UEFI OS
Boot Device Priority = I made the UEFI option the first choice and restarted the machine.
The installation should start normal.
E.g. See this guide:
www.sevenforums.com/tutorials/186875-uefi-unified-extensible-firmware-interface-install-windows-7-a.html
What I did was:
Select custom installation (Advanced).
Click Drive options (Advanced).
Delete all partitions (this might not be needed). When I did not delete all partitions I was asked every time after the install, during start up by the windows boot manager to select ether win 8 or win 7.
Click new (DO NOT make Changes in the size of the disk), apply, see NOTE!
Edit the Primary partition as you want it e.g. divide it to more partitions.
Select the one you will install windows on and do a normal install.
I do not make changes in the Bios after install. The Boot priority is automatic set to “Windows boot manager”. If I change the boot mode back to OS Mode Selection = UEFI OS, the computer will freeze at the “starting windows” screen again.
All this worked for me, good luck. There might be more to it, but this is a start.
By the way, the start up time for a MBT install was 37 s. And for the GPT it was 49 s.
Remember if we stand on each other’s shoulders we will reach higher
J.
NOTE: Here the installation program should create three partitions automatically!
Partition 1 - System - The EFI System partition that contains the NTLDR, HAL, Boot.txt, and other files that are needed to boot the system, such as drivers.
Partition 2 - MSR - The Microsoft Reserved (MSR) partition that reserves space on each disk drive for subsequent use by operating system software.
Partition 3 - Primary - Where Windows is to be installed to.
If this isn’t the cast you are not installing in UEIF mode. To check for this (thanks again Daniel):
If you need to find out if you have booted into BIOS mode or UEFI mode when the installer starts you can press SHIFT+F10 when the welcome installer shows up to open a cmd prompt. from here you will likely be at X:\Sources. Type cd .. to
go back a dir and move into \Windows\Panther\
Then type notepad setupact.log
Within this file do a ctrl+f and search for
Callback_BootEnvironmentDetect: Detected boot environment:
It should either say BIOS or UEFI.
To check if your disk is in the GPT format.
Open the command prompt.
Type: DISKPART
Type: List Disk
See for the star (*) in the GPT column -
Installing Windows XP Pro on a SATA HDD
Good Evening Everyone,
I just recently purchased the Gateway GT5678 desktop computer it came pre-installed with WIndows Vista. I want to Install Windows Xp Pro on the Serial ATA HDD, unfortunately I need the drivers and/or controllers so the Windows XP Pro Install could see the SATA HDD and I could finish the install. If any one could send me a link to retrieve the drivers and/or controllers so I could finish the Windows XP Pro install. Once again I am trying to find the correct link where I could download all the correct SATA HDD drivers and/or controllers that I need to finish the Windows XP Pro install. I will be very greatful for any assistance anyone can give me.
The type of Storage Controllers I have are:
NVIDIA nForce RAID Controller
NVIDIA nForce Serial ATA Controller
Microsoft iSCSI Initiator
I do have a floppy disk drive and the F6 feature I will be able to load the 3rd party drivers, but I just need to find out where I could download all the SATA HDD drivers and/or controllers that I need.
Thanks for the help,
Shawn L. B.Hi Shawn,
It seems Gateway has not released Windows XP drivers for your computer. From the Gateway website, we can see only Windows Vista drivers are available for you GT5678 desktop.
http://support.gateway.com/support/drivers/search.asp?st=pn¶m=1015334R
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Please understand that many computers preinstalled with Windows Vista are not compatible with Windows XP now. Before installing Windows XP on it, you’d better contact Gateway to confirm if Windows XP can be fully supported by your computer.
Hope it helps.
Tim Quan - MSFT
-
New Lenovo B560 without any OS (software) - how to install Windows XP Pro?
I just bought a new Lenovo B560 and it has no any software ... When I tried to install Window XP Pro, my new computer did not recognize the CD drive and I tried to go to the BIOS configuration and change the SATA Controller working mode to be compatible and that the boot device menu to be a CD ... But nothing happened ... Does anyone have any idea? What should I do to start with this XP OS installation?
when you press f12, you should be able to see the devices name. also, post the names.
to install windows xp from cd, you need to set dvd device as first device.
you can find more information from the link below:
http://windows.microsoft.com/en-US/windows/help/install-reinstall-uninstall
Maybe you are looking for
-
Simple Transformation ST, upload xml file to internal table
Hi. I want to upload some parts of an xml file into an sap internal table, especially the part "trackingnumber" which can occur several times. the xml looks like this: <?xml version="1.0" encoding="windows-1252"?> <OpenShipments xmlns="x-schema:OpenS
-
Moving iMovie Projects to an external drive
I cannot move iMovie projects to an external drive. I have followed the instructions. Help!
-
How can I find tables in a PDF document?
When I fun a full accessibility check, it tells me that I have problems with some tables in the document. The current error that concerns me is this: "(g) 6 Table element(s) with no TH child elements." The document originally contained a number of ta
-
Hello, Have a 2006 MBP core duo that Safari seems to stall and not load web pages using wireless or CAT 5, have reloaded the OS starting with Tiger and have progressed thru Snow Leopard and still no luck, I-chat works no issues and have done all the
-
How to change the shape of a RedLine dragging it with the mouse
I need to change the shape of an existing RedLine with the mouse, dragging the nodes with the mouse. Any idea?