Installing Windows XP Pro on a SATA HDD

Good Evening Everyone,
     I just recently purchased the Gateway GT5678 desktop computer it came pre-installed with WIndows Vista. I want to Install Windows Xp Pro on the Serial ATA HDD, unfortunately I need the drivers and/or controllers so the Windows XP Pro Install could see the SATA HDD and I could finish the install. If any one could send me a link to retrieve the drivers and/or controllers so I could finish the Windows XP Pro install. Once again I am trying to find the correct link where I could download all the correct SATA HDD drivers and/or controllers that I need to finish the Windows XP Pro install. I will be very greatful for any assistance anyone can give me.
The type of Storage Controllers I have are:
    NVIDIA nForce RAID Controller
    NVIDIA nForce Serial ATA Controller
    Microsoft iSCSI Initiator
I do have a floppy disk drive and the F6 feature I will be able to load the 3rd party drivers, but I just need to find out where I could download all the SATA HDD drivers and/or controllers that I need.
                                                                                                                Thanks for the help,
                                                                                                                         Shawn L. B. 

Hi Shawn,
It seems Gateway has not released Windows XP drivers for your computer. From the Gateway website, we can see only Windows Vista drivers are available for you GT5678 desktop.
http://support.gateway.com/support/drivers/search.asp?st=pn&param=1015334R
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Please understand that many computers preinstalled with Windows Vista are not compatible with Windows XP now. Before installing Windows XP on it, you’d better contact Gateway to confirm if Windows XP can be fully supported by your computer.
Hope it helps.
Tim Quan - MSFT
 

Similar Messages

  • K8N Neo2-F hangs when installing Windows XP Pro

    Hello, I've recently been trying to put together my first build, and I haven't had too much luck thus far.
    My problem occurs when trying to clean install Windows XP Pro on my hard drives. Using either of my HDDs results in the Windows setup screen coming up, loading all the drivers, and then crapping out right before it lets me add/delete partitions. It hangs right before there, and provides me with a STOP 0x000007 BSOD error. I've tried with both my SATA and my IDE drives, and nothing seems to work. The IDE drive works fine on my old motherboard (Non SATA compatible, so I can't even test the SATA drive on it), and lets me partition the drive, so it's not the HD, and it's not the CD. The processor, mobo, SATA HD and the RAM are all new.
    I've followed the guide that fafner and syar2003 have provided here, and have come up with nothing. (I only tried the first method, not the second one further down the thread).
    Is there a BIOS setting that I'm missing, or what?
    Thanks in advance.

    Amps on the power supply are:
    +3.3: 32A
    +5: 40A
    +12: 24A
    I've tried installing windows with just the SATA drive, just the IDE, and both. I've now tried installing Windows using syar2003's advice in aforementioned thread, saw this link and tried setting the max memclock to 166Mhz, with 1 stick, or 2. Had the timings set to auto though. No dice.
    No matter what, after it says "Setup is now starting Windows", it hangs, and after about 5 minutes, this BSOD comes up.

  • Unable to install Windows 7 Pro SP1 x64

    Hi guys,
    I have a Dell all in one 2310 and Dell had came out to replace the HDD as it was faulty, now when I try to install Windows 7 Pro SP1 onto the unit it comes up with "Windows cannot be installed to this disk. This computers hardware may not support booting
    to this disk. Ensure that the disks controller is enabled in the computer's BIOS menu.
    I have checked in the BIOS and the settings seem ok as in the SATA drives are enabled and on AHCI..
    When using diskpart to list the volumes it also cannot see the drive,
    HELP!!

    As Rick Dee says, the issue is with the hardware and not related to Windows. Moreover, SATA is in AHCI mode, so more information is needed. It's better to contact Dell technical support, as said by Rick Dee, so that it'll be solved as soon as possible.
    The new hard drive may also be replaced, if the situation worsens. Additionally, if the PC is under warranty, Dell technician will assist you in installation of Windows.
    Balaji Kundalam

  • Installing Windows Xp Pro NEED HELP!!

    I have a lenovo 3000 n200 0769 and it has no OS and the hdd is completely clean (it is ntfs formatted). When attempting to install windows xp pro the cd won't self boot (the drive is functioning properly as far as i know). Additionally, i get to the phoenix screen and it remains there.  if im not quick to press the lenovo care button the notebook wont respond to anything. It does give me the options of pressing esc to resume normal startup, F1 to enter bios setup, F11 to diagnose hardware or recover system (which i have tried with the cd inserted but it only takes me to a black screen) and F12 to choose a temp startup device (which also takes me to a black screen) I am able to access the bios setup once the screen turns on by pressing esc then F1 if that helps anyone in aiding my efforts but other then that i can't do anything with the notebook. Could it be something wrong with the bios?
    Message Edited by Twizz08 on 08-13-2008 03:05 PM

    Hi ! 
    On boot, press F1 just when the Lenovo logo shows. Navigate to the BIOS boot options and set the system to boot first on the CD device.
    Save and exit BIOS. The system should boot on the CD.
    If not check either the disk drive (faulty or not ? ) Bios passwd, try to have a USB stick (bootable with some software into it ) and try to boot from it (using F12) .
    If nothing works, It may be the mainboard or something like that faulty....
    I use a 0769 laptop with vista wiped out for Windows XP so it is feasible. (difficult as the disk is SATA and not IDE so you need a tweaked Win xp install CD) 

  • Unable to install windows 8 Pro (64bit) on R61, 7755jm1

    I have an old thinkpad, the R61 series, model 7755JM1.
    And I tried to install windows 8 pro (64bit) on it, hoping to have a taste of the new OS's touch features through remote control on my tablet.
    However, the installation has never been successful.
    I was able to finish the installation process. Yet whenever it starts to "setup my device", it was never able to finish, and it usually stopped at 65% or 84%.
    then my thinkpad would restart on its own, and threw an error message telling me my computer is restarted unexpectedly and the installation is not succeful, also suggesting me try to install again.
    This is very frustrating. I have checked on intel's website and other online sites that my CPU (core 2 dual process T8100) supports intel64, and execute disable bit (in my BIOS I think it is by name of "execution prevention"), and sse2, sse3. 
    In my BIOS, I enabled execution prevention, set SATA mode to "AHCI", and enabled "extended memory test". I format the partition every time I tried to install.
    I have installed windows 7 pro on my thinkpad before, and it was just fine.
    Do anybody have any idea what is going and how should I solve this?
    Many thanks.
    Lee.

    Hello,
    According to the Lenovo, the specs for your R61 (MT: 7755-JM1) as it shipped are as follows:
    T8100(2.1GHz), 1GB RAM, 160GB 5400rpm HD, 14.1in 1400x900 , 128MB nVIDIA Quadro NVS 140M, CDRW/DVDRW, Intel 802.11agn wireless, Bluetooth, Modem, 1Gb Ether, UltraNav, Sec Chip, FPR, Camera, 4c Li-Ion, WinVista Home Basic 32. 
    As you pointed out, the T8100 is a 64-bit CPU, so there should be no problems with that.  I did notice that the unit originally shipped with 1GB of RAM, though. 
    From looking at Microsoft's Windows 8 System Requirements page, I see that 2GB of RAM are required for the 64-bit edition of Microsoft Windows 8, so if your R61 only has the original 1GB of RAM in it, it will need to be upgraded..
    The R61 officially supports 4GB of RAM in the form of two 1GB PC2-6400 800MHz DDR SO-DIMM modules, and apparently can unofficially be upgraded to 8GB using two 4GB modules with the same characteristics.
    If you already have 2GB (or more) of RAM installed, the other suggestion off the top of my head is to make sure you have the latest version of the BIOS firmware installed:
    Name:  BIOS Update Bootable CD for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP, 2000 - ThinkPad R61, R61i 14.1 inch widescreen with IEEE 1394, ThinkPad T61, T61p
    URL:  http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013943
    Version:  2.30-1.08
    Released: 02 Apr 2012
    If the issue still occurs, please let us know and we can try and help you troubleshoot it further.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Is it possible to Install Windows 8 Pro 64-bit on a secondary hard dive in Mac Mini (Late 2012) using Boot Camp 5?

    Hello,
    I have a Mac Mini (Late 2012) running on OS X 10.8.3 and would like to install Windows 8 Pro on a secondary hard drive using Boot Camp 5. Is that really possible?
    A little background about the topic under discussion.
    1. Mac Mini (Late 2012) has a place holder to accomodate an additional hard drive (2.5") under the hood
    2. If just plugged with one, it would show as an additional volume in the finder
    3. Boot Camp 5 supoprts Windows 8 Pro 64-bit installation
    The idea is to run two operating systems (1. OS X and 2. Windows 8) on two hard drives in a Mac Mini, with maintainability a constraint.
    Have any one tried this out?  If so, kindly share if there are any specific procedures apart form the one given in Boot Camp 5 manual.
    Thanks in advance.
    ~ Narey

    Gotcha!!
    I am done with mounting a secondary HDD (thanks to ifixit) and installing Windows 8 Pro 64 bit on it without a worry. Charm, charm!!
    Boot Camp 5 guide prescribes all needed steps and when read and used correctly, installation must be an easy task. And all the existing apple hardwares work so good in the Windows environment too.
    I am going to help out a friend of mine in doing a similar thing on his mac too. If you got specific questions, please do shoot up here and i should be able to get a reply to it (if at all).
    Thanks everyone.
    ~ Narey

  • Unable to install Windows 7 pro after restart by Boot Camp Assistant

    Hello,
    I have an issue with installing windows 7 pro 64bit on my MBP 13" mid 2009.
    It has 500GB Samsung HDD.
    I tried to install windows 7 on a boot camp partition with boot Camp assistant and also during the process, I
    downloaded the driver helpers from apple website and burned it on dvd. after system restart, It starts to load windows
    files and then asks me to give it the cd of drivers [ right after I select the country and language in the start of the setup ]
    I tried to select the files of the cd [ which I burned by the boot camp assistant ] but it just keeps telling me there is
    NO suitable driver matches my mac.
    I have downloaded the genuine windows 7 and burned it on dvd.
    Also I have Lion, Boot Camp 4.0.1
    Can someone please help on this issue?
    Many thanks,

    The partition table needs to be repaired.
    That is why the guide asks to backup before you begin.
    Try Lion Recovery and check health of all the partitions.
    Sometimes repairing or try shrink and expand the partition.
    But it is not uncommon for what happened to you to render the drive with smaller HFS and then require erase the drive in some cases and restore.
    Carbon Copy Cloner 3.4.2
    Cloning as a Backup Strategy
    CCC is now able to also clone Lion's Recovery Partition as well.
    Check partition table health in Lion's Disk Utility
    Create Lion Recovery Drive
    Lion Recovery Mode

  • Can I install Windows XP Pro 64 bit on this specific Mac Pro?

    I have a 2x3GHz Quad-Core Intel Xeon. It's not one of the newest machines. It's from the first rev of dual-quads that came out. I bought it in mid-2007.
    I'd love to install Windows XP Pro 64-bit on a second hard drive.
    - Can I install Win XP 64 on this Mac?
    - If so, what version of Win XP Pro do I need to get?
    Thanks,
    ----------S

    Hi Steve,
    in theory you can install XP 64-bit Professional, which by the way is the only version of a 64-bit XP avaiable.
    There is no 64-bit XP Home.
    BUT, since Apple does not provide any drivers for 64-bit XP, you are on your own to look and find the needed drivers for it.
    You at least need drivers from Intel (for chipset, SATA and NIC) Realtek (for audio) Microsoft (for support of HD-Audio) and ATI/NVIDIA (for graphics card).
    You will still be missing any kind of Apple specifics like Keyboard functions, but should be able to run and work with XP-64.
    Good Luck
    Stefan

  • New Lenovo B560 without any OS (software) - how to install Windows XP Pro?

    I just bought a new Lenovo B560 and it has no any software ... When I tried to install Window XP Pro, my new computer did not recognize the CD drive and I tried to go to the BIOS configuration and change the SATA Controller working mode to be compatible and that the boot device menu to be a CD ... But nothing happened ... Does anyone have any idea? What should I do to start with this XP OS installation?

    when you press f12, you should be able to see the devices name. also, post the names.
    to install windows xp from cd, you need to set dvd device as first device.
    you can find more information from the link below:
    http://windows.microsoft.com/en-US/windows/help/install-reinstall-uninstall 

  • Can't install Windows 7 Pro x64 - device driver missing - can't eject DVD

    Hello,
    I am trying to install Windows 7 Pro x64 - I create the partition in boot camp and start windows install process. **During the Windows install process**, it says "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: if the Windows installation media is in the CD/DVD drive, you can safely remove it for this step".
    Apparently the drivers are on the OSX install DVD. But, there is no way to eject the windows DVD! Why on earth is there no manual eject on Macs? Is there another way to eject? I tried to put a paperclick in the slot next to where a CD is inserted but it didn't do anything. Is there another way to get Windows to see the correct device drivers?
    I am all for clean slick designs, but when it does not have all required functionality, it is kind of useless.
    I am talking to Mac Support and they can't help.
    Looks like I will have to return this Mac, I also need to boot into full Windows (without Parallels or VMWare) to do my work.
    dan
    Message was edited by: dbperson

    You don't mention what Mac you have, so I'd have to say there is almost no way to help.
    IF the 7 Pro x64 came download ISO thru EDU, you have to burn it, and if you use Disk Utility, at 2X reduced burn speed... otherwise it won't work.
    A VM isn't fussy and can use ISOs.
    If you want both native and VM, to have Windows installed on its own hard drive and use it under OS X, then you have to install it and use Boot Camp Assistant.
    I'd say it is all about your DVD media.

  • Install Windows 7 Pro 64bit on MacBook Pro 15" Mid 2014

    Trying to install Window 7 Pro on my new MacBook Pro 15" Mid 2014. I went through the following:
    Attempt 1: Downloading the latest bootcamp support drivers, copied on flash drive and used BCA for partitioning. Booting from Ext. DVD with USB pin drive containing the drivers inserted
    Attempt 2: Using ISO to create a bootable USB pin drive with bootcamp support drivers on the same..
    Both attempts ended being unable to pass Windows 7 language selection screen. Mouse/Trackpad/Keyboard are not working.
    Windows 8.1 pro works fine, but I'm not very happy with it..
    Any advice?

    The primary challenge is due to absence of proper drivers on the W7 installer to support the USB ports. One thing to check is if the USB is a USB2 or USB3. USB3 pen drives will not work.
    You should also try Attempt 2 using all available USB ports available, one at a time. Disconnect any other peripherals other than KM and USB before you start installation. BT devices are not very stable when used.
    If you can see any files in the Bootcamp volume from the OSX side, look for installer logs for details.
    find . -name setupact.log -print
    ./Windows/Logs/DPX/setupact.log
    ./Windows/Panther/setupact.log
    ./Windows/Panther/UnattendGC/setupact.log
    ./Windows/setupact.log
    ./Windows/System32/sysprep/Panther/IE/setupact.log

  • Some issues after clean installing windows 7 pro 64bit

    Hi,
    I have a couple of issues, I clean installed windows 7 pro, 64bit, (vanilla) restored my license with ABR and used system update to download all the drivers. (no issues until here) But after restarting the system, I found this issues:
    1. I have to put the bios in legacy mode for system to boot. Otherwise it gives me a "no operating system found" message. Is there any way to make a proper installation for the system to boot in UEFI and LEGACY?
    2. System update didn't install thinkvantage center. (the program that stays in the taskbar). Should this be installed manually? Or system update should have installed it?
    3*. I can not use lenovo driver page of my x120e. In IE it shows me repeatedly the wizard to choose my model, although I enter the correct info there. It starts all over again and again. Tried opera, I can see the drivers page, but I can't browse, or expand none of the sections. (all I can think of this, do I need java for the page to work?)
    3*. UPDATE: After installing IE 9, java and flash player, still not working. Opera too. Google Chrome works fine.           What's the matter with IE and OPERA? What component do I need to make IE work with lenovo drivers download page?
    Can anyone help me? Never had to deal with these issues.
    Thanks in advance 
    I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
    Who helped you today? Do not forget to thank him.
    My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

    Hello,
    Have you tried wiping the hard disk drive and reinstalling Windows 7 Professional x64 from the factory recovery discs while the BIOS is set to UEFI?  If so, did that work?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • How to install Windows 7 Pro 64bit from a Retail DVD

    Good afternoon
    I have got a Lenovo X201 which unfortunately cannot locate a recovery disc
    I mtherefore purchased a retail version of Win7 Pro 64 bit and put into my external DVD player to install
    I changed the boot option to look at the wxternal dvd and it start to work but when i get to aprox the screen saying copying files the computer shuts off
    Do you know how i can get round this issue of installing Windows 7 Pro 64 Bit
    I even tried downloading the Lenovo Windows 7 Pro 64 bit iso and the same result
    Many thanks

    The X201 does not have UEFI bios.
    ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
    ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
    ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
    ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

  • Step by step to install Windows 8 Pro on IdeaPad U310

    Hello community.
    I have read for very long time now this forums and can't find a clean solution to install Windows 8 Pro on my IdeaPad U.
    Can somebody post this step by step? I need this Intel Rapid Start Technology working too (like in the win 7 home, which was installed when I bought it).
    PS: please do not ask why I want this, I need this for my work.

    Apple has not announced support for Windows 8 yet.
    Allan

  • Boot camp not recognize keyboard and mouse when installing windows 7 pro 64 bit

    Hi,
    I have some issue when installing windows 7 pro 64 bit using boot camp. after done partitioning the windows drive and when boot to windows installation process, i've got stuck in the first screen when choosing the language. it seems that the keyboard and mouse are not detected.
    i'm using boot camp ver. 5.0.
    does anyone have similar problem with me?

    I have finally successfully installed Windows 7 x64 on MacBook Air 13.3" (2013) thru Bootcamp.
    Problem:  After Windows 7 install thru BootCamp, I got to the first login screen and not input devices (Mouse, keyboard, USB) worked.   I tried to boot into Windows Safemode, but I received the error  "Windows can not complete installation in Safe Mode".
    Cause:  WIndows 7 does not have native USB 3.0 drivers, included on the install images.
    Resolution:  I downloaded the latest device drivers with thru BootCamp and copied them to the USB Flash Drive that had my bootable Windows 7 x64 install on it.  The second option in BootCamp is "Download Support Media".  This does more than just download drivers.  It creates a file called "autoattended.xml".  This is key as it tells Windows during the install process to use the device drivers that you download.  Otherwise, you need to do it manually, which you can't because you have no mouse or keyboard.
    NOTE:  I had no need of a super drive because I had all the files on one USB flash drive.  Therefore, I don't think it matter which side of the MBA the USB drive was plugged in, as other solutions suggested.

Maybe you are looking for