Installing Windows XP sans Bootcamp error

I have a MacBook Pro running OSX 10.9.1, but I miss all my old games I used to play, so I tried partitioning the harddrive and installing Windows XP on the other half. I did this before on my old MacBook, but that was 4 years ago, and now bootcamp won't help you install anything but Windows 7 or later. After I partitioned the hardrive and restarted my computer with the disk in, I held down the option key and it brought up the install CD. I selected it, and it began unpacking the files for setup. But the second it tried to begin setup itself, the whole thing stopped and I recieved this error message:
STOP: 0x0000007B (0xF78D663C, 0xC0000034, 0x00000000, 0x00000000)
I've tried three more times to boot from the CD but I keep recieving this error. A google search turned up only solutions for people using bootcamp from 4 years ago, which doesn't work now. Help?

cbs,
You can do it once Mavericks is installed if you have the old version of bootcamp. You create the partition, then exit out. Put the Windows disk in the drive, boot up, and install to the partition.
Helizabeth,
No, what I was thinking is pull the old hard drive out and put it in an enclosure. Use Winclone to copy and move it to your new Mac. You might also get bootcamp off it that way as well. The real upside is that you don't have to go through the whole windows install and all your old stuff is there.
http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=sr_1_3?s=electronics&ie=UTF8&qid=1392232176&sr=1-3&keywords=2.5+hard+drive+en closure

Similar Messages

Installing Windows 7 on Bootcamp Error

I've been trying to install Windows 7 via Bootcamp and I keep getting this error
"The disk cannot be partitioned because some files cannot be moved.
Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
I have no idea what to do. Basically I need someone to give me a really simple answer on how to do this. I'm a 19 year old girl and I am not computer savvy. If someone could help me that would be fantastic.
Also I did install windows once before on my computer so I know it works I just don't remember how I did it, I guess I uninstalled because I couldn't find it anywhere/ I have no idea where to even look for it.
Thanks.

So, I went ahead and contaced apple.
It was not a pleasent experiance, I kept being bounced around diffrent support people; each time having to re-explain my problem, While they where all pretty friendly and somewhat helpful, they couldn't help me. I was therefore promoted to a "Senior Advisor", I rejoiced at the idea of this. After explaining my problem in depth and going throught everything I had done, she suggested I check out this other article posted on the Support Forums.
She sent me to this: https://discussions.apple.com/message/23756557#23756557
Which sends you to this: https://discussions.apple.com/thread/5488789?tstart=0
However, after following the somewhat unclear instructions on those discussions, I was completly unable to start up my bootcamp; I kept getting "Application has Crashed".
And here I am, back to square one.

Error installing windows xp via bootcamp

Hi guys,
I just bought my macbook pro yesterday and I tried to install windows xp via bootcamp and after the installing it says "setup is starting windows" and then an error saying "session3initializationfailed" came out.
I downloaded windows xp sp3 from my university and burn it into a disk.
Can anybody tell me what's going on or what did i do wrong?
Thanks

Greetings Appelonians
I am privileged to have attained a brand new Macbook Pro 2010. I am not completely new to Apple and have used 'boot camp' on my other iMac's have have owned previously. In the process of installing Windows XP on the new Macbook Pro, I came upon a few challenging errors, some I have solved, but others getting the best of me at them moment. I am going to run through my situation I am at the moment, starting with my initial challenge, the solutions I came up with and at last the cul de sac I am at the moment.
The family of errors all evolved with me trying to install Windows XP on my Mac
A) Windows on my Macbook
1) I used Boot Camp to create a 50gm partition for Windows XP.
2) I booted up with the WinXP Install CD (original)
3) Deleted the Boot Camp Partition, recreating it and formatted it as NTFS.
4) Rebooted and got my first error after choosing to have the Macbook reboot with the newly installed WinXP partition.
Error
Windows could not start because the following file is missing or corrupt:
<windows_root>\System32\hal.dll
Please re-install a copy of the above file.
windows_root\System32\hal.dll missing or corrupt:
Please re-install a copy of the above file.
Windows could not start because of a computer disk hardware configuration problem.
Could not read from the selected boot disk. Check boot path and disk hardware.
Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information.
Error Fix
1) I used a Bootdisk created by BartPE and changed a line in the Boot.ini file. Apparently this issue is due to the fact that the Macbook Pro has a 200Mb partition, the Boot.ini refers incorrectly to the wrong partition when trying to complete the WinXP installation after rebooting.
2) I changed the line in the Boot.ini that refers to the partition as 3 to 2 (see bold below):
[quote][boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(2)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Micro soft Windows XP Professional" /noexecute=optin /fastdetect [/quote]
3) This fixed the issue and Windows started after the reboot, remember still that my WinXP installation is still incompete.
B) Blue Screen of Death
1) During the WinXP run screen, my second error popped up as one of the dreaded [URL="http://justasktheitguy.com/software/blue-screen-unmountablebootvolume-stop-0x000000ed-0xaaaaaaaa0xbbbbbbbb0xcccccccc0xdddddddd/"]Blue Screen of Death[/URL], as found at the mentioned link.
2) It seems that this error is caused by a problem with an IDE cable or the BIOS in which case you just replace the cable or reload the fail-safe default settings in the BIOS. However, most of the time this error is caused by some sort of problem with the volume.
3) I booted again with my boot disk and ran 'chkdsk -r' and there after 'fixboot' to fix any errors regarding the volume of the HDD. (Fix can be found at the above mentioned 'Blue Screen of Death' link.)
4) Now I know that Mac does not use a BIOS but a EFI and this is where I am stuck.
All I need is to get WinXP installed properly on my New Macbook Pro. I had no trouble installing WinXP on my other iMacs and this has been the first time I had this issue. I do own a copy of Parallels, but I would like to run WinXP on a seperate partition with the option of either booting up with WinXP as well as using WinXP as Virtual Machine in Snow Leopard.
Hope some one out there can assist me, please.

Installing Windows 7 Using bootcamp 5.0 on MBPr OSX 10.8.2 Black Screen Not Loading Windows 7 Install on Boot

I am trying to install Windows 7 using Bootcamp Assistence 5.0 on a MacBook Pro Retina OSX 10.8.2, I went through all steps on Creatting the Windows 7.iso into a bootable USB Dirve 16GB I use a separate USB Drive 2 GB and download Windows Support Drivers Step 2 on bootcamp assistence. I run into the problem in step 3 when the computer reboot I just get a black screen the back display still on like I can still see the apple on the back lit up, but the screen is black and wont load the window installer, if i shut it down and bring it back up i get error saying IOS not found so then i have to shut it down, enter recovery and restart on osx partition, i can see that the bootcamp partition was created but cant load windows to it. Please can anybody help me or guide me on what i am doing wrong? thank you so much in advance

this will install as normal. before installing however you will need an activation key cos in win 7 this is one of the first pages that is presented before instalation.
the key from your relative could possibly work especially if he used your internet connection to register. but this could cause problems with his/your authenticity after 30 days.
the only other option is to purchase a key.
you say a 30 day trial, does it give you a temporary key for this?

**I've installed Windows 7 through bootcamp on the new 2012 iMac now I have no network drivers or graphics drivers to run aero! Help! **

**I've installed Windows 7 through bootcamp on the new 2012 iMac now I have no network drivers or graphics drivers to run aero! Help! **

I have been through it again and at the end it came up with the error:

Installing Windows 7 via Bootcamp on Snow Leopard. No Disc Drive.

Hi all,
I have a White macbook late 2006 model. The superdrive in it has failed and I'm trying to install Windows 7 via Bootcamp. I downloaded an open source app called rEFit that allows me to boot to a usb drive. I created the boot camp partition using boot camp and I chose the Quit and Install Later option on boot camp. BTW I have Mac OSX 10.6.8 using Boot Camp 3.0.4. I restart and go to boot to the usb drive and it gives me the no bootable drive error. The usb drive was created as a bootable usb drive using a macbook air using an windows 7 iso in boot camp. Does anyone know anyway that I can get windows 7 installed on this macbook via bootcamp. Virtualization software (ie VMware Fusion, Parallels, etc) is not an option (CS 6 will slow the computer to a halt if I attempt to run it in virtual machine of windows). Any and all help will be appreciated.

Sorry I didn't respond sooner....Hurricane Irene knocked out all our power
The initial install (at least for most of the reboots) does correctly reboot to Windows. However, towards the end of the Windows setup, where Windows is fully functional but is configuring itself, you may accidentally boot into OS X. Once you get Apple's Boot Camp drivers installed, you can set the target disk for a reboot, so that you don't need to hold down alt/option. In addition, you can also set the target disk in Lion via System_Preferences>System>Startup_Disk.
Unfortunately, the excellent boot manager rEFIt doesn't work with Lion (because of the hidden partition that Lion adds). Maybe they'll get it working soon, then you can use it and not worry about holding down alt all the time.

Why can't I install Windows 7 on Bootcamp?

I'm running OSx Mavricks 10.9.5. Every time I try to install Windows 7 on bootcamp, I get into the install part, and when it asks where I want to install it, I choose the bootcamp partition, then format it, and then it gives me this error message...
I get it every time i do try it, and I can't get past it any way. I've tried so many different things, but I always seem to get this message. Can someone please help me! Thanks!

You have too many partitions. Windows can't be any further back on the drive than the third partition, or it won't be bootable. It will install, but you won't be able to start up to it.
It also appears you have not set up the Boot Camp partition correctly. When the Mac restarts to the Windows DVD, the drive you would be installing to should be named "Boot Camp", not just a disk and partition designation.

Problem installing Windows 8 via Bootcamp on MacBook Pro 13 (late 2009).

Hello,
I've installed Windows 8 Pro on my MacBook Pro 13 (Late 2009) which does not support Windows 8. I've started installing Windows 7 via Bootcamp, then interupted the installation and pluged-in the Windows 8 Disk, and after formating the partition, I've installed Windows 8 64-Bit.
Here is the problem. The Windows works fine, BUT after restart when I hold 'Alt' and choose EFI Boot (Windows 8's partition), Windows 8 starts loading but then suddenly there is a white flash and it restarts again. So after shut down or restart I cannot boot it.
Do you think that this is because I do not have Bootcamp installed on the Windows 8?
I've downloaded the supported software for Windows 8, but when I click setup.exe, it is giving me the following error:
This version of Bootcamp is not intended for this computer model. I've been trying to install it for more than 78 hours, so I'll be extremely gratefull to whoever help me. Thank you in advance.
P.S. Mac OS X partition boots fine.

If it is really not possible, I get it. But there are plenty of people that are running Windows 8 on the same model, that is powerfull enough to run Win 8. I'm actually running it, but until shut down or restart . Can't I edit Info.plst file alternative for Windows 8 like I did to allow BootCamp to image burn my USB on my model? I mean my model is same as the next one. I can't see why the drivers for mid 2010, won''t work on mine...

Why does this message keep appearing when i try to instal windows 7 through bootcamp? - "something went wrong and the USB cannot be configured for the installation"

Why does this message keep appearing when Itry to instal windows 7 through bootcamp? - "Your bootable USB drive could not be created. An error occurred while copying the Windows installation files."

Found a solution!
Follow the extended version of these directions here:
https://discussions.apple.com/docs/DOC-3581
Worked like a charm!

How to install windows 7 in bootcamp from flash drive os x 10.9.1

How to install windows 7 in bootcamp from flash drive os x 10.9.1

oooHideooo wrote:
It DOESN'T WORK!!
I tried tonnes of method already, and the apple guide method absolutely doesn't work for MacBook Air, 10.9.1
Did you even tried it yourself????!! with Maverick 10.9.1 you will NOT be able to get pass the bootcamp first page:"install window 7". It will give an error msg saying "The installer disc could not be found"
My usb confirmed bootable! I created it with bootcamp, and tested it on a different macbook and it works. But doesn't work on MacBook Air. (Even startup disk doesn't detect it as bootable in Air)
anyone else has a real solution to this problem?
Thousands have successfully tried it themselves and installed Windows on a Macbook Air. Perhaps if you provided some details about what you did and what errors you observed we could help you. The Boot Camp instaructions, if followed, will produce a successful install.

Trying to install windows 7 and getting error message windows must be installed to a partition formatted as NTFS

Trying to install windows 7 and getting error message Windows must be installed to a partition formatted as NTFS

Welcome to Apple Support Communities
Boot Camp Assistant creates a Windows partition in FAT32 to make the Windows XP installation easier.
The problem is that Windows Vista, 7 and 8 require a NTFS partition, so the Windows installer gives this error. The only thing you have to do is to choose the BOOTCAMP partition in the installer and go to “Drive options (advanced)” > Format. Finally, install it

Trying to install Windows 7 with Bootcamp on my Macbook with a faulty CD drive

I am trying to install Windows 7 with Bootcamp on my Macbook A1278 (OS 10.6.8) with a faulty CD drive (CDs and DVDs get stuck in it and I had to get it removed in an Apple store, so I don't want to use it anymore). I have got a licence for the product but I am only in possession of the ISO, is there any way to install it using a USB stick?
I don't have many options while launching Bootcamp, only
"Download the Windows support software for this Mac" but when I try I get a message explaining me that the download could not continue as the software is not available,
or
"I have the Mac OS X installation disc [...]" but obviously I can't use my CD drive so this is not an option. I tried it anyway and I created a Windows partition but when asked to "start the Windows installer", I can only continue by insering a CD.
I tried to use a USB stick and added the ISO on it but nothing has changed.
How can I install my copy on Windows?...

BobTheFisherman > Hem, yeah, that is stating the problem and not working toward resolving it.
Turbostar > I checked the link and it seems to be relating to the first video I have seen on the subject. I tried to install Tuxera then to work with rEFIt, but I did not get any result yet (I don't know if I am doing something wrong during the USB writing process as many different ways are explained on different websites).
So far my last try was to launch Windows 7 USB DVD Download Tool on VMware Fusion but it the only disk shown is A:\ Removable disk (not the name of my USB) and it is stated that the disk is being used by another program, even though it's not open on the Mac side.
Some websites are advising to write the copy of windows on a USB via a PC and then launch it on the Macbook, so I might try that in the next few days. I will keep you updated.
If anyone has another option I might not have think about, or an advice on how to efficiently create a bootable Windows setup USB with my Mac, please let me know!

How can I install Mac Mini drivers for Windows 7 32-bit if I didn't install Windows 7 using bootcamp?

Hello. I have a mac-mini (mid 2010) and with bootcamp, was successfully running XP.
I then decided to upgraded to Windows 7 had lots of trouble installing it on my existing bootcamp partition.
I finally was able to install Windows 7, by just booting off the CD and letting it install that way.
But reading more on it, I think I was supposed to use Bootcamp to do it for me...
I had thought the Bootcamp Assistant was for only fresh installs of a Windows O.S. where no partitiion existed previously.
I had a partition so thought Bootcamp wasn't required for my needs.
But now, inside Windows 7, I have 0 drivers installed. I have an AirPort Express, so on the Mac side, I downloaded
and installed the Windows version of AirPort Utility and copied it to my USB stick. Then
I exported my settings to a text file on a USB Stick, then on Windows was able to successfully install AirPort Utility and import the settings.
But it still doesn't find my network. I am pretty sure I'm broadcasting my SSID...
So I need to know the following:
1) How to know I'm broadcasting my SSID - where do I find this in settings?
2) How I can install my mac-mini drivers on Windows 7 so I can use my existing wireless network, now that I've gone through the installation without using Bootcamp?
3) Do I need to set up network adapters and all that stuff in Windows 7 first? If so, how and what drivers do I need?
One other thing I tried was downloading Bootccamp 4.x and installing that on Windows 7 to see if it gives me the drivers that were supposed to be written to my USB stick if I had installed Windows 7 using Bootcamp in the first place... However I think the message it said was that it couldn't install as it was the wrong version. So I'm still stuck without drivers and therefore no internet.
And that is my main task - getting the Internet up and running in Windows 7.
Other Info:
I'm running Mac OS X 10.6.8 with 2 GB of memory.
I installed the 32-bit version of Windows 7 and I don't know what version of Bootcamp I'm running...
I can tell you that BootCamp Assistant is v3.0.4, but don't know if that means Bootcamp is also 3.0.4.
Hope you can help.
Thanks.

I tried something that worked for me...
Knowing that after my install of Windows 7 wasn't the correct method (didn't go through bootcamp), and the BootCamp 4.x package wouldn't install under windows 7, I tried reinstalling Bootcamp 4.x in Windows 7 to see what the exact message was it gave me. The message said it couldn't install because of a 32-bit O.S. vs a 64-bit version of the package.
So that got me thinging - my XP version was 32-bit, and so is my Windows 7 installation. So I tried installing the bootcamp that came with my Mac OS X installation CD. This is bootcamp version 3.1.
Not only did it install, but it practically took care of everything driver-wise for me. I was then able to see my wireless network, enter my password and I was connected. The only thing else I had to do to get on the Internet was bring IE8 online (guess it ships offline by default). Firewall and Antivirus are now installed, just a few more things to go.
That's one thing that's just not clear that I'll be sure to note for next time... The Bootcamp packages you download are actually driver packages for Windows. That is where the Windows drivers exists that are necessary to make your Windows 7 PC work on a bootcamp partition!
I didn't need the AirPoirt Utility at all (at least, I never went into it).
Thanks VikingOSX for your post. I will not need to follow the steps you provided, but they may help someone else as all of these bootcamp issues I've been reading seem to be very unique per installation.
Hopefully my solution helps others.

HT4407 When installing Windows 7 using Bootcamp, I get message: "Need 64-bit Windows Installation USB drive or DVD." I thought my install disk was for 32 or 64 bit. What does this mean?

When Installing Windows 7 using Bootcamp, I get message: "Need 64 bit Windows installation USB drive or DVD." What does this mean?

It means you need the 64 bit Version of Windows on a USB stick or DVD.

Installing Windows 7 using bootcamp help

Hi all,
I am planning to install windows 7 using bootcamp to play PC games only, as love mac software for everything else, and want to make sure that all will run smoothly before i buy the required stuff.
I am running OSX 10.8.5 on my iMac, which has a wireless keyboard, wireless trackpad, and wireless mouse, and a connected external superdireve (for CD's and disks, sorry to patronise just wanting to be clear ) and wanted to know if i can install windows using a disk that i buy in a normal pack, as i have heard that the external drives can have problems?
All advice much appreciated!

this will install as normal. before installing however you will need an activation key cos in win 7 this is one of the first pages that is presented before instalation.
the key from your relative could possibly work especially if he used your internet connection to register. but this could cause problems with his/your authenticity after 30 days.
the only other option is to purchase a key.
you say a 30 day trial, does it give you a temporary key for this?

Installing Windows XP sans Bootcamp error

Similar Messages

Maybe you are looking for