Installing Windows XP Twice....?

I've already installed Windows XP on my PC, which is beside my mac. My question is, can I use the same install disc to install Windows XP in Bootcamp on my iMac? The PC must remain able to function in Windows XP.
Thanks in advance to those who replied

Hi and welcome to Discussions,
the Windows license allows you to use Windows only on one computer.
When you install it on a second computer and activate it, the first activation will be revoked, thus making the first installation useless.
Microsoft checks thesse through their Windows Genuine Advantage (WGA).
Without product activation Windows cease to work after 30 days.
Regards
Stefan

Similar Messages

Cannot install windows 8.1 on imac 5k - apple support says "Correct, that machine can't install windows" Boot camp fail

I have a brand new imac 5k, with 4ghz i7, 295x GPU, 3.1TB fusion drive. Bought the machine so I could dual boot - I need windows for VR Dev work.
I've spent the last week and a half on tech support calls with Apple Senior Tech agents, and Microsoft agents as well, and today have been told that indeed this machine cannot run windows 8.1. Apparently Apple engineering knows about the issue, but says the problem is microsoft's. Ugh.
The latest iteration of the issue comes when installing 8.1 onto an external thunderbolt SSD (without even using boot camp) - I go through the EFI installer, convert the drive to GPT, format it as ntfs, but when I select the partition to install onto, the installer says it can't find the partition it just created. Smuh?
I've also tried the install through boot camp. This installation actually worked twice, but the install was unstable. After booting back into osX, then returning to Windows, the windows install went corrupt and couldn't be repaired. Subsequent attempts to install windows yielded a flurry of different errors, including "windows doesn't support GPT in this mode" or "the disk is locked, please unlock the disk" or "MBR must be converted to GPT" (where once I converted to GPT, the drive could no longer be found, despite the operation completing successfully.)
At any rate, it's a huge mess. I'd happily return the machine for a different config, but the company I bought it from will only swap it for a similar model -- so I've spent a pile on a machine that does not function as advertised; apple says "too bad, talk to Microsoft." Microsoft says "too bad, we've never seen this, this is an apple issue."
Has anyone out there gotten windows up and running on an iMac5k with fusion drive? If so, did you have to go through a crazy maze to make it work?
Any help is appreciated.
Thanks,
MC

Michael Conelly wrote:
After much gnashing of teeth, and a half dozen support calls, I'd all but given up. I finally seem to have solved this though - sort of - by installing windows 8.1 on boot camp on an older iMac, then cloning the bootcamp disk to an external thunderbolt drive via Winclone. That worked seamlessly, sticking to winclone's instructions, and I can boot via EFI to Windows 8.1 on the new iMac. So far so good.
I usually install W8.1 via EFI by using DU and a Free Space partition. The 3TB Fusion is first split into the underlying SSD/HDD physicals. OSX and Windows OSes are installed on SSD via EFI (no BCA). The OSX part and half the HDD are then used to create a new CS volume. The other HDD half becomes NTFS for non-Windows OS files. The Hybrid MBR method is completely unsatisfactory with the 3TB Fusion drive.
How is the TB/Winclone image for performance of the OS (since pagefile.sys is also on the TB)?

I am trying to install windows 8 at my macbook air boot camp

I am trying to install windows 8 at my macbook air boot camp but Boot Camp Assistant i showing an error that the disk cannot be portioned because some files cannot be moved. Back up the disc and use disk utility to format it was a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistant Again.
I had already installed teh first time Windows on my MacBook Air and Mac Book Pro. Actually I had more issues to install on the pro than Air.
But my Macbook Air had an issue on November 2013, 3 weeks after buying it and Apple gave me a new MacBook Air but they only transferred the information on my mac and the windows partion was lost according to them, they could copy it in to my new MacBook Air. Now that I am trying to install my windows I can not access to the aprtion section and get the error message from above.
What can I do to to install it? I am using a 32GB USB and OEM Windows 8 at USB External Drive. The same I used before. I dont know understand what changed if I did it before?
Please advise..

I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
open disk utility, confirm that you only have 1 partition (mac journaled)
restart and PRAM reset
open disk utility and repair permissions twice
restart boot camp assistant
Does it work?
If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed.

How to install Windows 8 on Mid 09 Macbook Pro (10.8.3)

So i loved the new Windows 8, and even had it installed before bootcamp supported windows 8 on my new iMac, i waited to buy a bigger hard drive and more ram for my mid 09 Macbook Pro. The day i bought the new hardware, Apple released 10.8.3, and an updated bootcamp to support Windows 8! Yay! I got my install disc out (iso file burned to DVD), opened up bootcamp assistant, only to get an error saying apple dropped support for my mid 09 Macbook Pro and Windows 8. Making the install impossible through bootcamp. Do not fret, i have the solution, and EVERYTHING works perfectly. Here we go.
Gather your Windows 8 install disc AND a Windows 7 install disc (you can surely find one by searching the net, use your old one, or borrow a colleagues... we are licensing Windows 8, NOT 7, this is just for my trick to fool bootcamp assistant and no i do not condone piracy)
Inside BootCamp Assistant, the driver download may hang,it did for me, twice..could be heavy usage due to the popular new update...so i recommend downloading it faster, and manually here http://support.apple.com/downloads/#macoscomponents and get 4.1.4586 yes this is for windows 7, ALSO while you are there, download the windows 8 support pack 5.0.5033, as we will need that later as well. As a matter of fact, DO IT THIS WAY and dont bother
That being said and done, in BootCamp Assistant (OSX), only check off Install Windows 7, leaving the download support software unchecked
Partition your hard drive as youd like, this splits up your storage space however you like, keep in mind which OS you plan to run the most, and obviously give that one more room, i.e you do all your Photoshop work, and app development in OSX, and only use Windows for office stuff, you'd want to give yourself more room on the OSX side. I however bought a huge new internal drive to split them basically in half, as i use them both frequently.
This step is where the trick comes. OSX 10.8.3 / BootCamp will advise you there is no support for Windows 8..only 7 with your Mid 09 Macbook Pro if you have put your Windows 8 disc in, upsetting you as it did me...possibly bringing you to this post, thats not FAIR is it? Your 09 MacBook Pro is still JUST AS GOOD as a lot of PC's running Windows 8, why they excluded this model i have no idea...im sure they had reasons, but i dont care at the moment..lol
INSTEAD place a Windows 7 install disc in, and click next. BootCamp Assistant will now partition your drive, make the windows side bootable and restart your MBP.
Let it do its thing, and eventually you will land at the Windows 7 installation interface. We don't really want that, we want Windows 8 right?
Click the "x" to close the installation for Windows 7, it threatens your MBP will restart, and allow it to do so.
**IMPORTANT** Once you hear the beloved Mac chime, quickly press and hold the "option" key.
This brings you to an area where you can select a startup disk. At this point, lets get rid of the trick. Hit your eject button and get rid of the Windows 7 install disc, we are done with it now.
You now, well in my case anyway, should only see your Mac HD, and the Recovery Disk.
Insert your Windows 8 install disc
Now WAIT. Eventually, you should see a new DVD looking icon that says Windows pop up next to the MacHD and Recovery Disk. (depending on what you called your iso, it may something else...not sure, but you cant miss the new entry)
This is where a wired mouse will be needed, or use tab/space/enter to navigate to the new Windows Disc icon and launch it.
You are now in Windows 8's installation interface, cool!
Follow the steps until it asks you where you want to install it. You should see a partition about equal to what you set earlier in BootCamp Assistant, and it SHOULD say Bootcamp right on it. Select this partition. (mine was the last one, the fourth i believe)
OH NO, it says you cant install it to that partition, this is normal. You need to highlight/select this partition, and click format. I cant remember, but i think you have to click "options" to get to a the spot where you can format it. Pretty straight forward. Safety check, obviously make sure you have the Bootcamp partition selected, dont format your Mac OSX partition!
After the quick format is done, Windows 8 installer will then allow you to click "next" and from there the magic happens.
Go through the whole Windows 8 install, and setup how you would like, this takes awhile, and im not covering that, as its a hand in hand walkthrough like any other install.
Once your inside your new Windows 8, you'll see a bunch of things not working, like tap to click on your trackpad, no on screen displays for brigtness, volume, and possibly other stuff. Not cool right?
Grab your USB stick, or Burnt disc that you applied the bootcamp support downloads to in the begining of this tutorial.
FIRST open the Windows 7 Bootcamp install, 4.1.4586, open the folder and find setup.exe and run it (we are in windows 8 now)
It takes a while, but Apple's BootCamp will install a bunch of drivers, etc, and eventually restart your MBP, which is cool, let it do it.
Upon finishing, lets go back to the USB/Burnt Disc where all your support software was saved, and lets get the newly support BootCamp 5.0.5033 opened up.
Big Thanks to a post by ErikVanD i seen on this forum for the next step.
If you want, try and click setup in this latest BootCamp support set, and you will get another sad error claiming x64 is not supported, something awful to that nature. Awww man, this far, only to get let down. Nope. We are going to fix that. And this is where ErikVanD's post pointed me to what we do next.
It was said to navigate in the BootCamp 5.0.5033 folder to something of the effect of BootCamp/Drivers/Apple and run the MSI file "BootCamp" (MSI file will say Windows Installer in its description, and not necessarily MSI for anyone not too savy with Windows) **note - NOT .bootcamp (notice the period in the front) and it should work and install the new Windows 8 support for your MBP...but in my case it didn't, which is why im posting how i fixed this. Your setup may somehow be different, but mine gave me an error say it "needs elevated permissions to run, use setup.exe instead. We tried that remember! And it gave us the x64 not supported error. Oh man! Blabbing aside, this file needs to be ran as an administrator, which yeah your the only user, but Windows is funny like that. Normally youd just right click, and select run as administrator, but out the box, that option isnt there when you right click, only install, repair, open with etc. Here's the next trick, you need to add a registry file to enable running as an administrator, dont be afraid, this is an old trick, and really easy.
Open notepad in Windows, and create a new doc, call it Add_MSI_run_as_administrator.reg
Paste this following code into the new doc
Windows Registry Editor Version 5.00
HKEY_CLASSES_ROOT\Msi.Package\Shell\runas] "HasLUAShield"="" [HKEY_CLASSES_ROOT\Msi.Package\shell\runas\Command] @=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\    00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\   73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\   00,69,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
Or download the file already made from my company server at http://www.theprojectdev.com/public/pub.html **i put this there as a courtesy to help others like me, its just a complete reg file, so either create your own through copy and pasting above or download it. Either way, put it on your desktop.
Now double click the new registry file, and allow/ok it to do its thing.
Once done, you can discard the file from your desktop, or keep, your choice.
Guess What!? Now we can do the impossible! Lets revisit that solution from before by going to the newest BootCamp 5.0.5033, and navigate to BootCamp/drivers/Apple and select that tricky BootCamp MSI file that wouldnt allow us to run, this time RIGHT CLICK it. Because of our new registry entry we placed, we now have an option to "Run as Administrator" Click that option.
WooHoo! We have done what coudnt be done, BootCamp will now walk you through the installer, and add all the great support for Windows 8 on your mid 09 Macbook Pro that they for some reason neglected!
After the update, you will endure yet another restart. From there, most likely using a wired mouse still, navigate to the system tray icon on the bottom right corner of the screen (little up arrow) and click it. It will pop up a little menu, showing system processes/stuff running, click the gray squared diamond (this is bootcamp) and it will bring up the newest BootCamp control panel. From here, you can nav to trackpad/touchpad and set tap to click (finally) and gestures, etc. This control panel has lots of good stuff to make a MBP user feel comfortable in Windows 8. There you go! You did it!
I really, sincerely hope this helps someone, as it really made my day to get this resolved. I want to add that all On Screen Displays will work (your volume/brightness etc) they keyboard backlighting, and so much more, it really works great. I upgraded my hard drive to 1tb, and installed 8gb of PNY RAM from best buy ($40) and it runs Windows 8, AND OSX fantastically.
My company http://www.theprojectdev.com designs and develops mobile apps (iOS and Android) and web design and development, so im a heavy user of both OS's, and this setup is just the best thing that has happened to me in a portable sense. Runs so so so fast! Enjoy everyone!

**********************IMPORTANT EDIT TO THE TUTORIAL***********************************************************
Everyone im sorry, i made a mistake informing you which BootCamp support drivers to download from Apple. You see I originally downloaded my Windows 7 Support from the BootCamp Assistant, and had the version number completely wrong.
The first BootCamp install packahe you should down load from http://support.apple.com/downloads/#macoscomponents is actually 4.0.4033
That will be your first BootCamp installation in Windows 8 that works. Im so sorry Markeez for wasting your time, my excitement had blinded me last night.
Also be sure to copy both 4.0.4033's folder and the latest 5.0.5033 folders to your Windows 8 desktop as well, dont run them off your USB stick or DVD/C, whatever media you copied them to.
So Markeez, after you download the correct Windows 7 Support Software 4.0.4033, simply click setup.exe and it will run without any trouble.
Then after the inital BootCamp install is complete, your MBP restarted and all is done, you need to perform the "Run as Administrator" trick i posted above. Its real easy. Open notepad, and copy the EXACT code i posted in the tutorial in a fresh new doc, and save the file to your desktop EXACTLY how i posted it Add_MSI_Run_as_administrator.reg
Now close notepad, and double click the newly created registry file, and allow it access to do what it needs. What this does is allows your run the new installer in BootCamp 5.0.5033 as an administrator, which you wont have the option to unless you use this registry file.
Ok after the registry part is done, go inside the latest BootCamp 5.0.5033 folder, to BootCamp/drivers/Apple and find BootCamp --- probanly the ottom most MSI file, and again it will not say MSI on the right side, it will say Windows Installer or something to that degree. Also do NOT confuse it with a similar file in that folder called .bootcamp this is not the one we need.   OK, so now, using a WIRED MOUSE, right click the BootCamp MSI file, and you will now have the option to Run As Administrator, if you did the registry bit. IF YOU DIDNT do the registry bit, you will only see Install, Repair, Uninstall etc. If thats the case, just download the zip from my company site, it contains only a completed copy of that reg file.
Running this file in the Apple folder as an admin is the key to making this work, let me know if you have any further issues, im watching. Also i apologize everyone, but for some reason i cant edit the tutorial to fix my mistake, very sorry about the confusion.

MacBook Pro 15" (Late 2013) will not install Windows 8.1 Pro under Boot Camp?

Have spent many hours trying to sort this out. I was told this morning in the end by a 'Senior Advisor' @ Apple that Boot Camp does not support Windows 8.1 Pro so effectively it seems like my only option for a new machine purchased earlier in the week is to return for a refund.
This despite the Apple Spec saying "
Windows 8: Windows 8 or 8.1, Windows 8 or 8.1 Pro (Boot Camp 5 only)"
The subject has been aired in thread https://discussions.apple.com/thread/5474320?start=585&tstart=0 but it has been suggested I post a fresh thread.
I have purchased a new 8.1 Pro license, so this is not an upgrade. I have followed the Boot Camp instructions, including getting the update for this model spcifically, but the nearest I got to a successful install returns soemthing of the like 'Unable to update boot settings' or the like and installation cancels. My machine is a mess I guess now, but in a final effort - does anyone have the step by step 'idiots guide' to working through the setup successfully? I don't want to get involved in massses of messing around with files as this should clearly not be necessary for achieving an advertised solution on a new machine bought within the last week should it?
Appreciate any help - I have up to seven more days left in my option to return for a full refund..... and maybe buy a Dell instead?
PS : We have many Apple products, Air, ipads and iphones so would dearly like to sort this out if possible.
Thanks for any help...

8/8.1 will install fine but there's some stuff you need to do before starting to ensure no issues
purchase a retail 8/8.1 license
use only a USB2 flash drive
get a clean 8 or 8.1 ISO
newer machines are more selective with the ISO for some reason (ISOs that worked to install Windows on many different older Macs would not work)
if you've made lots of changes, hacks and adjustments trying to get this work on your own, you should clean install OSX first, do not restore from time machine and start at step 3 to get Windows installed, you can go back later and copy files back to OSX
if you want to try without clean installing OSX, here goes
open boot camp assistant (bca) and choose option 3 ONLY if it reads 'remove/delete' Windows
open disk utility (du) and confirm that your HD now only has 1 single partition ('macintosh HD' unless you've renamed it)
restart machine and do a PRAM reset
open du and repair permissions TWICE
open bca and choose all 3 options (create, download, install)
from here, the process follows the standard boot camp instructions (http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf) but pay attention to step 3 where you do have to manually reformat the boot camp partition
clean ISOs
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
http://getintopc.com/softwares/operating-systems/windows-8-1-download/
if you are trying to clean install 8.1, google clean install 8.1 with windows 8 key for steps like this
http://forum.notebookreview.com/windows-os-software/735517-how-install-windows-8 -1-clean-your-windows-8-upgrade-key.html

Major difficulties installing Windows 7/8.1

Firstly, I'd like to apologize for my not so perfect English, but nevertheless - here's my cry of help.
Recently, I've had a "pleasure" of messing up my already installed Windows on my iMac (27-inch, Mid 2011) that has been installed for almost 2-3 years and worked in harmony with Mac OS. Back then, I used a DVD disc to install Windows, so I thought it shouldn't be much of a trouble installing it now on OS X Yosemite (boy, was I wrong).
While trying to reinstall Windows for the first time, it couldn't find any drivers on my CD/DVD or USB flash stick, even though my installation DVD was in the optical drive and USB stick with all required drivers was in place. Although, my USB flash drive was formatted FAT32 and after that failed, I've tried formatting it to ExFAT (which both of the options failed). So I thought: "Alright, I'll burn a new DVD with drivers for bootcamp on the DVD itself this time, instead of a flash stick". Same result.
I'm sorry, but after 3 days of failed attempts at installing Windows, I might have forgotten other methods I've tried to continue my installation. So I'm just going to list all things that I've tried failed.
Using bootable USB flash drive with Bootcamp Support Software on it.(EFI boot) (Using Boot Camp Assistant, which wasn't even an option on my iMac, so I had to make some adjustments in terminal and info.plist) *
* After successfully performing this method, I was able to choice on which partition I'd like to install Windows. So I choose the one partition, that Boot Camp Assistant created for me. It declined to continue, because the partition wasn't formatted for Windows OS. After formatting Windows partition, I've stumble upon another error which was something about changing my partition from MBR to GPT. I've googled the solution and that is to access Command Prompt and format partition using "diskpart" utility. I went on selection which disk and which partition I wanted to format(which I checked twice, if not more). After converting the already clean partition to GPT space, so I could continue - for some reason, diskpart utility decided wipe out my whole disk clean(including MacOS). Not knowing that you can restore your OS and all your files using Time Machine, I was terrified. After that, I decided not to install anything anymore, simple because I was tired of infinite reading and researching on how to properly do it.
Using bootable USB flash drive. Only this time, I've made partition as a free space in Disk Utility. *
* This method is actually worked out, though not so well. I was able to install Windows 8.1 this time, but it had no sound. No driver, and not a single solution (regarding tweaking some settings in Device Manager or Sound folder in Control Panel) didn't helped at all. And now, I having trouble switching from MacOS to WindowsOS, because for some reason Windows partition is labeled as "EFI boot" and it is asking me to insert a bootable USB installation flash drive to continue.
I'm pretty sure, methods mentioned above is not all of the methods, that I've tried. But I think, at this point, I've tried everything there is to try in order to properly install Windows.
My main point is that I've decided to test my optical drive both on Mac and Windows and see, how it is able to read information from DVD disc. It was loading files, that was on DVD, very very slowly. Sometimes not even loading them all. It just went on spinning in optical drive, making humming noises and reading sounds. Now, when I think I've understood what was the main problem of failed installation using DVD disc, my questions are:
What can I do at this point in order to install Windows properly?
Is the optical drive really the main reason, that Windows couldn't locate some drivers? Because I remember my first attempt at installing with DVD, I've made it past the partition selection, but my installation stopped at 1-2% giving me the error)
How can I fix an optical drive?
Is it even possible to fix?
Oh, I've also trying to burn a Windows ISO onto my DVD using iMac, which gave me a Medium Write Error at the end of the process.
My apologies for the wall of text, but I don't know what to do at this point. I'm leaving outside of US, so there is no official Apple building in which I could ask for replacement or asking to repair my optical drive. I'm pretty sure my warranty is expired by now too.
I will answer any question, but please help me fix this problem that I've created myself... Thank you.

I know this is a stretch... but have you tried using a retail Windows disc instead of your own homegrown copy?
Let me be frank, I've never had any retail Windows disc (both physical and ISO versions) in my entire experience with computers. This one disc, that I used to install Windows with 3 years ago worked perfectly back then. (without me even using any USB flash with drivers on it) I had second disc for it with drivers on it and as much as I could remember, I've never ejected Windows disc during the installation, so that I could insert the second disc and it could find "device drivers" to continue. (yet again, I might be completely wrong here). But the idea of ejecting the Windows DVD during this "device drivers" error was terrifying to me. Even if it told me, that "ejecting the Windows disc at this point is safe". I don't even know how to eject the disc during this error manually from iMac. Please, if you have any suggestions and really think that I should eject the DVD during this error - I will do it, if you tell me how. Come to think of it, why it couldn't find any drivers on USB back then is beyond me.
My suggestion is to verify the ISO and DVD both using M$ FCIV tool. http://support.microsoft.com/kb/841290
I will try doing so, thank you.
If the ISO is valid and BCA will let you create a USB (without modifying BC Info.plist), it is a much safer and supported route.
No, I don't have any option of creating a bootable USB in BCA, I had to modify info.plist myself back when I try booting from USB flash.

Install Windows 8 on MBPr - screen fail

I am trying to Install Windows 8 on my MBPr via Boot Camp. I get the USB flash drive setup via Boot Camp in OSX, created the partion, reboots and installs files and features. When it gets to "Finishing install" it reboots twice, and then i get to a screen where i can only see 1 quater of the screen - the rest i blacked out - see below image
I tried 4-5 times now, each with the same result. I can see the mouse pointer in the blue area, and move it around - but only in the blue area. The black area is "disabled" in lack of a better word. I tried keeping it there for 6 hours without touching anything, thinking it was perhaps still installing, but nothing changed. In the first couple of install screens, i see everything as i should - meaning 100% of the display is vissible.
I know Boot Camp does not officialy support Windows 8, but i see alot of people who got it running with no major issues - and none like the one i am getting.
Any ideas? I am running the latest version of OSX and version 5.0.1 of Boot Camp (standard on my OSX, did not do anything do upgrade it myself). I tried installing Windows 7 in exactly the same procedure, and that worked as it should.
Screenshot of error: http://tinypic.com/r/2jercpd/6

You already know that Windows 8 is not supported. What else do you need to do? Read the Bootcamp system requirements for Windows 8. If some have got it working it is likely not working 100% or they have different hardware than you or they have tweaked their system/install.

How do I install windows 7 drivers correctly on my macbook pro retina?

I've installed Windows 7 Ultimate (64 bit) twice now, and each time I get on, none of the bootcamp drivers seem to be installed correctly. This means I can't access the internet because a network adapter isn't present, and I can't play games because the NVIDIA drivers aren't there. I've seen other people have had this problem in the past, but their fix was to download bootcamp 3.x from Apple's download site, but obviously that doesn't work now as the version is newer.
Does anyone know how to correctly install Windows so this doesn't happen, or how to get the drivers installed correctly?
Thank you very much for your time

For 2 reasons, and they are about the hardware.
1) Apple/Mac and BC restrict the way you use the computer. Maybe not for you but for me. It does not allow you to create any other parttitions for Windows to use. You can't even re-partition the BC partition into 2 drives. That will HOSE the Windows system and maybe the OS X part.
2) Apple/Mac does not allow the use of all the hardware. You can not use both graphic cards. switch between them. Windows Must use the descrete graphics adapter which cause the system to run hotter. This is a limitation imposed by Apple as with Reall Windows PCs that have both the Interl embedded and add-on descrete graphics you can switch between them.
Actually BC 4 has been out since Lion shipped on new Mac's. BC 4 also restricted the installation of Windows to just Win 7, no more XP. Which was what you could do with Snow Leopard and BC 3
Message was edited by: Shootist007

I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

Hi LamboMong,
just try this:
http://refit.sourceforge.net
install, reboot twice and choose the Windows-Partition on next startup.
(The apple-bootloader doesn't display all bootable harddisks.
With rEFIt you can boot from all partitions/harddisks on your computer.)
I hope that will solve your problem.
Daniel Fernau

Trouble installing Windows 8.1 on MacBook Pro Retina mid 2014

Hi everyone
I recently bought a MacBook Pro Retina (mid 2014, 15", 2.8GHz, 1TB SSD) and wanted to install Windows 8.1 on it via bootcamp.
I have an official .ISO package of Windows 8.1 (it's x64, I checked), got it from MS Dreamspark as a student, and a valid serial number for it, of course.
Burned the image on a 16gb flash drive via bootcamp and proceeded to install. When asked by windows installer which partition to install on, selected bootcamp and clicked 'format', as it was recommended to do in various instructions on the internet (as it wouldn't install without formatting, I tried). The installation went good and finished, but immedeatly after that the installer gave me a notification "Impossible to update computer loading configuration, installation cancelled" (maybe it's not exactly like that, translated as accurately as I could, I'm installing windows in Russian).
I tried it twice, each time re-burning the installation drive. Got the same error each time.
All the software (OS X, bootcamp, etc.) is up to date, the macbook shouldn't have any problems as it was bought just a few days ago.
How can I solve this problem?

yes sorry if it ruin the ending of one of the youtube clips you will be witching if you have problems as how you install windows in bootcamp
https://www.google.dk/webhp?sourceid=chrome-instant&ion=1&espv=2&es_th=1&ie=UTF- 8#q=install+windows+8.1+on+macbook+pro+retina&tbm=vid

Installing Windows XP on Macbook Pro 17 inch with broken screen...

My Macbook Pro 17 inch's (2.16 ghz, 2006) screen is broken, and displays only the top 1/4 accurately, with the lower 3/4 a series of lines, etc...
Up until recently, the screen would work after a period of time so long as I did not move it. However, now, it is a complete loss, as mentioned above.
My problem is that I cannot install Windows XP using bootcamp because I cannot see what on earth I am doing! And the last thing I want to do is accidently format my OS X partition while blindly fumbling around in the Windows XP boot screen.
I was able to install (obviously) Leopard by closing the laptop screen immediately after startup, forcing the computer to use my external monitor. This, however, does not work once the computer begins the windows installer, it simply reverts back to the laptop screen.
Any advice would be of great help! I have searched forum after forum, but have found no one with a similar problem.
Thank you!
p.s.- you'd think a $3200 laptop would last a little longer. So far I have replaced the HD twice, as well as the left internal cooling fan...

My Macbook Pro 17 inch's (2.16 ghz, 2006) screen is broken, and displays only the top 1/4 accurately, with the lower 3/4 a series of lines, etc...
Up until recently, the screen would work after a period of time so long as I did not move it. However, now, it is a complete loss, as mentioned above.
My problem is that I cannot install Windows XP using bootcamp because I cannot see what on earth I am doing! And the last thing I want to do is accidently format my OS X partition while blindly fumbling around in the Windows XP boot screen.
I was able to install (obviously) Leopard by closing the laptop screen immediately after startup, forcing the computer to use my external monitor. This, however, does not work once the computer begins the windows installer, it simply reverts back to the laptop screen.
Any advice would be of great help! I have searched forum after forum, but have found no one with a similar problem.
Thank you!
p.s.- you'd think a $3200 laptop would last a little longer. So far I have replaced the HD twice, as well as the left internal cooling fan...

Having problems installing Windows 7 on my Macbook Pro w/Boot Camp

Having a problem installing Windows 7 Home Premium (64-Bit) on my Macbook Pro (mid-2010) 13". I use the Boot Camp Assistant, download the necessary drivers and burn them to a disc. I insert my legit Windows 7 install disc, and the process begins but once I get to 'Completing installation', my mac freezes and I have to restart it and delete the partition. This has happened twice. I have contacted Apple and Microsoft and neither of them said that they could help me with the problem so if someone has had a similar issue and found a solution to it, I would really appreciate the help.

Hi S,
You may want to post in the Boot Camp forum where more of those experts hang out: https://discussions.apple.com/community/windows_software/boot_camp

Unable to Install Windows Server 2012 on Windows Server 2008 R2 SP1 Hyper-V

My attempts to install are failing with a message "Windows cannot install required files. The file may be corrupt or missing....Error code: 0x800705070".
I am posting this on the Wondows 2012 Server forum but I have had exactly the same problem as described below with Windows 2008 R2 SP1.
As the title says this is on a Windows Server 2008 R2 SP1 host with all current updates. I have downloaded the ISO file from a Technet subscription file twice, once by direct download and once by the Akamai downloader. The virtual disk is connected with
the default IDE driver. I mounted both installation images as ISOs, located on a file system on the host server. I have tried installs by deleting the VM and recreating both the VM and a new virtual disk, re-using a previously created virtual disk, and
deleting the partitions in a previously created virtual disk, and executing the format command, and then attempting the install.
I have exactly the same problem trying to create a Windows Server 2008 R2 SP1 VM on the same host OS. With those attempts, I downloaded the Technet subscription iso 4 or 5 times, and burned one to a DVD which I attached to the created VM. Same
error message.
The virtual machines and virtual disks I created and used were all located on an RAID5 array, on a builtin Intel RAID controller using Intel Rapid Storage Technology software version 11.2.0.1066. The host Windows Server 2008 R2 SP1 uses this file system
but the OS is installed on a dedicated drive (C).
I had previously created a guest VM with Windows Server 2008 R2 (several months worth of updates ago) without drama.
I have spent hours reading forums and blog articles on this. A common response is to download the iso another time, and/or burn it to a DVD instead of mounting an iso image. Although I didn't do the later yet with 2012 Server, but I have done these
other steps attempting to install Windows 2008 Server SP1. The install process takes a while (not to mention doing multiple downloads). Given this seems to be a common recommended remedy, and indeed based on posts does seem to eliminate the problem is some
cases, why doesn't somebody change the Microsoft installer program so it does a thorough integrity check at the beginning of the install process?

Jeff,
After the exercise of Windows 2012 Server successfully installing (as I described above) I also successfully installed Windows 2008 R2 on Hyper-V. From my standpoint, I have eliminated the problem (which isn't the same as correcting the problem).
The answer to your specific question regarding Hyper-V support is that the motherboard I am using, an Asus P5Q, is not supported by Windows 2008 R2 because it doesn't use ECC memory, and the vendor doesn't say it supports Windows 2008. But I am sure you
know the motherboard vendors often don't test older motherboards with newer software versions. It appears that in specifying ECC memory Microsoft is trying to protect users of Windows Server from hurting themselves, not saying the software won't run.
Having said that, my suspicion in the beginning was, and still is, that it was some variable(s) left in an unknown state in the Hyper-V environment, which was why after trying to install Windows 2008 R2 several times I tried Windows 2012 which resulted in
the same error, and then encountered the same error trying to install Windows 7 on the same Hyper-V installation. The specific Hyper-V Windows 2008 R2 server had run without any operating problems for months before I started having trouble, and although it
had been quite a while since I had created VMs, that process used to work. The hardware didn't change. What changed was applying updates through Microsoft Update, and a few access control rights I changed, and at least I think, I set back to their original
value.
So in short, no, my hardware isn't supported by Windows 2008 Server. Two, your assertion that you are running the same software configuration that I am is very unlikely to be true. There are an extremely large number of things which are different between
your test system and mine, such as which Windows 2008 components are installed, what updates were installed and in what order they were installed, and what other third party software each of us is running, and between AD, and all the features, a large number
of potential differences in ACLs, options, etc. and I don't for a minute think this particular problem was caused by the underlying hardware.
I do appreciate your taking the time to try to help me, and I hope there is one thing you and I could agree on. Microsoft could pretty easily make it much easier to isolate problems. In this day and age reporting hex error codes (as opposed to doing the
table lookup in the error handling proc), and not providing more diagnostic information seems to me to be almost quaint. And in this case Microsoft can dismiss my problems on the grounds it was all on unsupported hardware. Unfortunately, I think they
are missing an opportunity to make their software better, because in my opinion what I encountered there are a set of conditions which will cause installations to fail that aren't going to get corrected.

Error 0x80300024 When Installing Windows 7 Using Bootcamp

Hi. I'm trying to install windows on my mac mini. I have a 2010 mini server with dual 500gb hard drives. I want to have one disc for apple and the other disc for windows. When I try the install I get the windows error 0x80300024. After some research I found a straightforward, but not easy solution. It seems windows freaks out when it sees more than one physical hard drive. Therefore the solution is to disconnect the cables for the other hard drive, install windows on the target drive, then reconnect the cables to the other drive. I rather not tear open the mini and do this as it looks a little painful. Anyone have a suggestion on how to get around this? And yes, I know it's a windows issue but i figured there must be some mini users who've experienced this issue.
Thanks.
Craig

Hi Graig,
One possble solution here, with maybe alt key to boot your Windows installer instead of the c key...
PrincessPeachJun 17, 2009, 06:48 PM
I just installed it today (twice actually, after changing my mind about something) so I can tell you how to do it. What I did was completely ignore Boot Camp and used Disk Utility to format the intended Windows drive as FAT32/Master Boot Record. Then I just rebooted with C held down and the Windows 7 CD took care of the rest.
I have a 2009 Mac Pro so all my drivers etc were on my OS disc. If you need to burn the drivers, by all means use Boot Camp just for that part
I got a warning in Windows 7 that Boot Camp had issues with the RC but it has been rock solid so far.
http://forums.macrumors.com/archive/index.php/t-722467.html

How to Install Windows 8 on (some) unsupported Macs

Open finder
Open Applications folder
Open Utilities folder
Right click on Boot Camp Assisstant > Get info
Click the Lock in the bottom right corner and enter Admin password
Click the plus in the left corner and add your user.
Give yourself Read & Write privleges
Click the lock again
Right click on Boot Camp Assisstant > Show package contents
Open Contents folder
Open Info.plist
Scroll to the bottom where the <key>Win7OnlyModels</key> string is
delete the whole string (in my case <string>MacBookPro5,5</string>)
You will be promted that your don't have permission and to make a duplicate. Click Duplicate.
Backspace out the space between the lines if there is any.
Save as Info.plist to the Desktop.
Find the Finder window with the Contents page in it.
Change the name of the Info.plist to Info.plist.bak. It will automatically add .plist to it
Drag the Info.plist file from the Desktop the Contents folder.
Authenticate yourself
Let the file be moved.
Click back twice.
Open Boot Camp Assisstant
Click next.
Install Windows 7 or later version is now shown.
There you go. Windows 8 on unsupported Macs in 25 steps, or a couple minutes. (not including partition or install ;P)
If you don't know what your Model number is, Click the Apple in the upper right corner, About This Mac > More Info... > System Report... > and it will show Model Identifier. That is the <string> that your will need to delete. If you don't see it chances are your won't be able to do this. Could try this other "Trick" in here: https://discussions.apple.com/thread/4897066?start=0&tstart=0

"If you don't see it chances are your won't be able to do this."
WRONG! YOU WILL BE ABLE TO DO THIS THANKS TO ME! FIRST FOLLOW ALL OF "aplet's" steps and then do this:
<key>PreUSBBootSupportedModels</key>
          <array>
                    <string>MacBook7,1</string>
                    <string>MacBookAir3,2</string>
                    <string>MacBookPro8,3</string>
                    <string>MacPro5,1</string>
                    <string>Macmini4,1</string>
                    <string>iMac12,2</string>
Click the Apple in the upper right corner, About This Mac > More Info... > System Report... > and it will show Model Identifier.
Change it by deleting "Pre" and adding your Model's <string>
For example I ended up with this:
<key>USBBootSupportedModels</key>
<array>
<string>MacBook6,1</string>
<string>MacBook7,1</string>
<string>MacBookAir3,2</string>
<string>MacBookPro8,3</string>
<string>MacPro5,1</string>
<string>Macmini4,1</string>
<string>iMac12,2</string>
Then finish it off by following "Giuseppe Cantarella's" Steps!
AND THAT'S IT! YOU'RE WELCOME!!!!!
P.S. THANKS TO "aplet" for giving me guidance on the first steps and inspiring my edit, and "Giuseppe Cantarella" for finishing off the whole process!!!!

Installing Windows XP Twice....?

Similar Messages

Maybe you are looking for