Installing Windows XP, Windows error message

Hey Guys
Some weeks ago I dropped my baby (macbook 13" Late 2008) on the floor. I had to replace my hard drive and reinstall everything again including windows xp (unfortunately I need it for my work).
I have installed windows xp on my mac many times before, but on this new hard drive I experience som problems. I followed the bootcamp instructions: partitioned my HDD, booted from the Windows CD and installed the content. But after the restart, when it for the first time should boot from the Windows HDD, it says: (translated from danish) "Windows could not start because of a problem with the configuration with the hardware of the hard drive."
Hope some one can help me..
Thanks
/ Anders Kruse (Denmark)

Hello, dtharachai. 
Thank you for the question.  Here are a couple things you could try to troubleshoot this issue.  You can try to repair the program Apple Software Update by following the first article below.  After you process these steps, attempt to uninstall this program.  If that step does not work, I have included a more in depth troubleshooting article that will help you uninstall program.  Once this is done you should be able to install Safari. 
How to repair Software Update for Windows
http://support.apple.com/kb/TA24326
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. 

Similar Messages

  • ITunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times.

    iTunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times. Please help.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

    When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Windows Blue Screen Error Message Appears As Soon As IPod Connected

    Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

    Hi Mike thank you for replying,
    I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
    I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
    If you can help me out or suggest where to search it would be much appreciated.
    Thx

  • When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later".

    When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later". I have completely uninstalled and then reinstalled iTunes. I have also completely reset my iTouch to factory defaults. I have even followed all the advice provided previously to other forum member with the same problem. Nothing seems to work. Please help me someone.

    I'm getting the same problem with both my IPad 4 and iPhone 5
    Just started a few weeks back, Since then I have had two Itunes updates.
    Is this something Apple is aware of and trying to fix?

  • I-tunes won't download onto Windows XP.  Error message 'this application package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this a a valid window Installation package'.

    How do you download i-tunes onto Windows XP when error message occurs, 'This application pack could not be opened. Verify that hte package exists and that you can access it, or contact the application vendor to verify that this is a valid window installation package'.

    I wish I knew because i'm having the same problem. As soon as I find the answer I will post.

  • Dv6 Notebook "Black Screen" following "Windows Blue Screen" error message. Caps Lock blinking!

    I have a HP DV6 notebook. I left my computer on overnight and the next morning I woke up to find a Windows Blue Screen error message. It said to restart my computer. I was in a rush so I just closed the lid. When I returned I opened the lid and the screen was black. I pressed the power button to restart it and I haven't been able to restart it since. I now have a power light, a black screen and the CAPS LOCK light is blinking twice then a pause! Please help!

    Hi btgclark,
    I understand that you are having an issue with turning on your notebook and the CAPS LOCK light blinks twice and then pauses. The following document 'Computer Does Not Start and the LEDs Blink or the Computer Beeps' will walk you through the steps that you need to follow. For your error code, it means that the BIOS has a corruption failure. This document will walk you through the necessary steps to get this resolved.
    If for some reason this document does not resolve the issue please provide me with the model number to your notebook. I have included a document 'How Do I Find My Model Number or Product Number?'
    Please let me know how this works out for you, thank you.
    I worked on behalf of HP

  • CM1312 NFP: WIndows 7: USB Error message ~"Lost Connection"

    With the 1312 connected to my Windwos 7 desktop, periodically Windows gives an error message that indicates that it has lost connection to the printer.  Unplugging and replugging the USB cable fixes the problem.  Otherwise the print & scan functions work perfectly.  Symptomatically it appears as if the printer goes to sleep and stops responding to whatever "keep alive" messages Windows might be sending.  Is there a setting in the printer, in Windows or in the printer driver software that can prevent this message?
    BTW, the other way to work around this problem is to just access the printer via the Ethernet but the scan funciton is not accessible via the network (an unfortunate limitation).

    aluniewski,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • IQ525A - Two Windows Script Host Error messages, plus folders won't close

    How do I get folders to close, when right clicking will not close them? I am running Trend Micro security and also have two Windows Script Host error messages appearing. I need to click OK to proceed each time I use IQ525A/
    assume IQ is running in safe mode, as start menu and bar is white.Any suggestions
    Thanks
    Kitcat 

    Crash report:
    https://crash-stats.mozilla.com/report/index/ab4ee242-57f1-4a84-baef-ca2202150308
    Signature shutdownhang
    Start your '''Computer''' in safe mode with networking. Then start Firefox. Try '''Safe''' web sites.
    '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''
    Wait a few minutes (don't go anywhere), then close it.
    Is the problem still there?

  • How do I complete uninstalling itunes? when I try installing i get an error message saying it can't find the path ,itunes64.msi missing.

    How do I complete uninstalling itunes? when I try installing i get an error message saying it can't find the path ,itunes64.msi missing

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
    tt2

  • Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding",

    Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you

    If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier.  You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

  • When connecting my iPhone or iPod touch to my laptop to update software, the software downloads to my laptop but when it goes to install I get an error message that says network timed out.  Any advice here please?

    For the past 2-3 months everytime I connect my iPhone or iPod touch to my laptop to update the software through itunes I have issues.  I have tried download and install option and the download only option.  When the progress bar gets to 100 % downloading and switches to start to install I get an error message that says something like connection issue/timed out/network something.  My internet is working so what am I doing wrong when I didn't used to have this problem?

    I've been getting timed out for 2 days now, what finally worked for me was not plugging the phone into the computer and just doing the update through my wifi, worked perfectly, took less than 15 minutes

  • Every time I try to install iTunes i get error message 2329.

    Every time I try to install iTunes i get error message 2329. This is really ticking me off and I would appreciate any help.

    Here is an article from the apple support website that might help out.
    http://support.apple.com/kb/HT1926?viewlocale=en_US

  • When installing Adobe Presenter, get error message plattform not compatible.

    When installing Adobe Presenter, get error message plattform not compatible.

    Check the tech specs to see if your system meets the minimum requirements for the software.

  • After trying to install Mavericks, got an error message my hard drive was bad.

    After trying to install Mavericks, got an error message my hard drive was bad.  Took it in to the Apple Store and the 'Genius' bar guy couldn't see it as an external drive when he connected another Macbook. If I get another hard drive what's involved in getting my system operational again?

    Hi there
    Looks like I may be experiencing a similar issue to yours as having issues installing Maverick on snow leopard?
    https://discussions.apple.com/thread/6286238
    Did you manage to get your problems resolved?

  • Had to wipe and reload my computer, am trying to download web premium 5.5 but when i try to open and install gives me an error message of trouble extracting file try downloading again. How can i download?

    Had to wipe and reload my computer, am trying to download web premium 5.5 but when i try to open and install gives me an error message of trouble extracting file try downloading again. How can i download?

    You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    CS5.5: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html

Maybe you are looking for

  • Event times adding a date

    I have a G5, a laptop and an iPhone being sync'd with MobileMe. The iPhone is new last week. I have been sync'ing the two computers via MobileMe for a few months. Yesterday I noticed on the MacBook in iCal that all the event start and stop times had

  • How do I reinstall GarageBand 6.0.5 on my MacBook Pro Retina running OS X Mavericks?

    I have recently installed the latest version of GarageBand on my recently purchased MacBook Pro 13" Retina. After discovering two GarageBand icons in the Launchpad, I removed the older version, only to discover that the app was also automatically era

  • Can't see pages in Iweb when no monitor connected to mac

    ...Sounds obvious I guess, but basicaly this is my problem. I have a mac mini and I connect to it using logmein via my laptop. It works a treat. However when I open I web i can see all my websites but the pages just display as blank. If i connect a m

  • LC process in MM Retail

    Dear All if there is some workaround to configure the procedure of LC (external vendor PO) in Retail, as its sap standard doesn't allow the procedure of LC in Retail system Thanks in advance,

  • Ldap.ora

    Hello, I need to setup an ldap with Oracle v.10g. I read that sqlnet.ora and ldap.ora files are used. Where theses files must be located, on the client or on the server? Has somebody examples of theses two files? Thanks in advance for your help Fabri