Installing Windows XP with Bootcamp .....Problem,Please help

I have a Macbook Pro running Leopard 10.5.6 and have tried to install Windows XP Professional Service Pack 2. I downloaded the Boot Camp Installation & Setup Guide and have followed the instructions to the letter.
My problem is that when the install is completed and the computer reboots I get a black screen with the following,"Unable to boot from drive, Disk error, press any key to restart".
When I press "any key" nothing happens and the only way to reboot is to turn off the computer and turn it back on holding down the option key.
It then presents the Mac and Windows HD. If I choose the Windows HD the same as above happens again. If I choose the Mac HD the computer operates as normal.
Thanks in advance for any suggestions Cheers

Thanks for you reply.
I have done everything as per the printed instructions.
It does not halt when I select the target partition.
Yes the Bootcamp volume is on the desktop
I am making it the suggested 32 GB.
I never get to the option to choose NTFS.
I get the black screen and message after Windows install is "completed" and the computer tries to reboot to Windows.
If I try to rebot and choose the Windows partition (After closing down and holding down the "option" key) I keep getting the black screen and message) and can go no further.

Similar Messages

Installing Windows 10 with Bootcamp problem?

I've been trying to install Windows 10 Technical Preview for a while now jumping through loads of hoops with no luck. Keep in mind that I've had various versions of windows and ubuntu on both of my SSDs in the past.
Here's a look at my set up:
Macbook Pro mid 2012
Two 256GB SSD's
32GB Flash drive
Windows 10 iso from microsoft
I have tried to make the USB from Bootcamp, then install through bootcamp. It formats the SSD, then restarts the computer. Although, the computer boots up into a black screen with a blinking underscore. If I hold option, I see two options from the USB. "Windows" and "EFI Boot" If I press the Windows partition on the USB from the boot selection, I get back to the black screen with a blinking underscore. If I press the "EFI Boot" option, it brings me to the normal set up screen. After I click advanced setup, and click my drive to install, I can't click the next button. Of course I format the drive, but still no luck. It comes up with an error saying that the drive is an MBR format and needs to be in GPT. ("The selected disk has an MBR partition table. On EFI systems, Windows can only installed on GPT disks.") I tried going through the repair option and going into the command prompt while typing the "Bootrec.exe /Fixboot" without any luck of it fixing the issue. I also tried making the USB drive through windows and back onto my Mac, no luck either. Currently I'm downloading a Windows 8.1 iso to see if I can install this, then upgrade through bootcamp. Only problem is that this will take a while. Do any of you guys have any suggestions I might have missed? I'll update this constantly with how the windows 8 install then upgrade goes, but until then, what do you guys think?

I solved my issue. The method I used was a combination of other methods I found on the internet.
1.) Went back into Mac os X and opened Disk Utility
2.) Clicked on my SSD I was going to install windows onto
3.) Went to the partition tab and selected one partition, then changed the format to free space and hit apply
4.) I booted back into the windows installation EFI
5.) Got back to the part where you choose your drive still getting an error
6.) I then hit "Shift + F10" to open command prompt, and typed this in:
"diskpart"
Found my drive by typing "list disk" (In my case, it was Disk 0)
"Select disk 0" (Or what ever your drive is, probably 0)
"clean all" Let it sit and do it's job for about 15 minutes
Closed command prompt, still might give an error
7.) Restarted computer and went back into the EFI installation
8.) Allowed me to format, then hit next like normal!
Everything is working fine for me after installing the Bootcamp drivers except for audio. I've tried installing it through the compatibility options, still nothing. Do any of you guys know any way to fix the audio issue with Windows 10?

Hi, can I install windows XP with bootcamp on my iMac which is now on Maverick? Please help.

Hello all, can I install windows XP with bootcamp on my iMac which is now on Maverick? Please advise. Thank you.

Install 7. Don't bother with applying drivers and such, just reboot again from DVD and install again, it will see the existing system and this time activation will be possible.
Vista is mess, takes longer etc. Hope you have SP1 version of 7. And for Vista, only SP2+ are even supported now, by MS.

Trying to install Windows 7 with Bootcamp on my Macbook with a faulty CD drive

I am trying to install Windows 7 with Bootcamp on my Macbook A1278 (OS 10.6.8) with a faulty CD drive (CDs and DVDs get stuck in it and I had to get it removed in an Apple store, so I don't want to use it anymore). I have got a licence for the product but I am only in possession of the ISO, is there any way to install it using a USB stick?
I don't have many options while launching Bootcamp, only
"Download the Windows support software for this Mac" but when I try I get a message explaining me that the download could not continue as the software is not available,
or
"I have the Mac OS X installation disc [...]" but obviously I can't use my CD drive so this is not an option. I tried it anyway and I created a Windows partition but when asked to "start the Windows installer", I can only continue by insering a CD.
I tried to use a USB stick and added the ISO on it but nothing has changed.
How can I install my copy on Windows?...

BobTheFisherman > Hem, yeah, that is stating the problem and not working toward resolving it.
Turbostar > I checked the link and it seems to be relating to the first video I have seen on the subject. I tried to install Tuxera then to work with rEFIt, but I did not get any result yet (I don't know if I am doing something wrong during the USB writing process as many different ways are explained on different websites).
So far my last try was to launch Windows 7 USB DVD Download Tool on VMware Fusion but it the only disk shown is A:\ Removable disk (not the name of my USB) and it is stated that the disk is being used by another program, even though it's not open on the Mac side.
Some websites are advising to write the copy of windows on a USB via a PC and then launch it on the Macbook, so I might try that in the next few days. I will keep you updated.
If anyone has another option I might not have think about, or an advice on how to efficiently create a bootable Windows setup USB with my Mac, please let me know!

Installing Window 7 with bootcamp

Hi
I installed windows 7 with bootcamp and it worked.
Later I removed windows 7 with bootcamp and it also worked.
Now I'm reinstalling windows with bootcamp and I'm not able to create a partition that I can use for Windows. Bootcamp creates a partition I formatted it to NTFS.
But when I am installing windows it prompts: can't create partition.
Please help

Be aware that EFI boot has issues with Graphics and Audio on Windows 7, but not on Windows 8+.
If you are using EFI boot, create a Free Space partition and let it be split by the Installer, into MSR and MSD. On Mac models which are considered preUEFI models, it may not work properly. Check your Model Identifier (System Report -> Hardware) against this list. preUEFI models do not understand the MSR data partition and will return Boot Device not found.

Installing windows 8 with bootcamp 5. Have to make a choice at personalize but mouse is not working. What can I do?

installing windows 8 with bootcamp 5. Have to make a choice at personalize but mouse is not working. What can I do?

I solved my problem by using a USB mouse and a USB keyboard instead of bluetooth

When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

if your computer does not support the operating system you wish to install in bootcamp then you have to use a virtual machine like virtual box to install the operating system you wish to install

HT201456 After installing windows 7 with bootcamp, am I able to remove the flash drive?

After installing windows 7 with bootcamp, am I able to remove the flash drive?

Yes, if you have installed the driver package.

Installing Windows 7 with Bootcamp question

Hey guys, I recently switched over from a PC to a Mac this year and wanted to install Windows 7 with Bootcamp so I could do some gaming every once and a while. I've read that I can't use the restore discs that I got with my ASUS to install Vista, so that's out of the question. I also have a Windows 7 upgrade disc that I used a while back to install Windows 7 on the ASUS. Will that upgrade disc work if the ASUS is restored? If not, will an OEM copy of Windows 7 be all I need? A retail copy of Windows 7 Home Edition is kind of steep to only be used part of the time.
Thanks in advance!

Well, "WHICH" Mac do you have?
Go to the Apple menu (upper left corner)/About This Mac/More Info and at the top (under Hardware content) it should say "Model name" and "Identifier". Then put it in your profile so you don't have to keep remembering to do it.:)
You might call/e-mail ASUS and ask if it can be used on another computer. Don't tell them it will be used on a Mac. Just tell them your thinking on building one from scratch.
If you have a "desktop" ASUS then you MIGHT be able to just switch over the HD after Upgrading it to 7, but I believe the ASUS, Dell, etc, setups are "matched" to the COMPUTER so it might not work. A retail full version of Window 7 will work. You might also try Microsoft and tell them the same thing, might be able to get another "Upgrade"?
I'm in the same boat, just play a few games on XP but want to get Windows 7, you have to spend $100 dollars more for "Pro" to get the "Windows XP Mode"! E-Bay does have it quite a bit cheaper then Microsoft sells it for.

Can i install windows 7 with bootcamp on imac with flash storage

can i install windows 7 with bootcamp on imac with flash storage

Yes, you can. The type of storage on which you install is not relevant, as long as it is connected to an 'internal' storage control. Windows licensing restricts its installation on external/portable disks. Windows-to-go is the only legal means to do that.

HT5639 can i install windows xp with bootcamp

can i install windows xp with bootcamp? Which version bootcamp should I go for?

Depending on which Mac mini you have and your OS X version, you can install Windows XP or not in Boot Camp.
First, open  > About this Mac, and tell me what OS X version you have. If it's 10.7 or 10.8, you can't install Windows XP. Also, if you have a Mid 2011 or newer Mac mini, you can't install it too. In this case, you have to use Parallels, VMware Fusion or VirtualBox, and install Windows XP on a virtual machine.
If you have 10.5 or 10.6, you can install Windows XP in Boot Camp. Have a look at this website to see which Boot Camp version you need > http://support.apple.com/kb/HT5634

Parallels + Bootcamp = Problem/ Please Help me

Hey,
I am using an external Firewire drive, because my internal is damaged. So I was not able to install windows xp through bootcamp (Bootable device Error).
So what I did is, I made a Bootcamp Partition and I set up Parallels to install Windows on the Bootcamp Partition.
Everything works fine. Installer shows up, I reformat using NTFS Quick Format, and then it copies the install files, and then The Virtual Computer Reboots. But after Rebooting, not the normal installer shows up, but the installation screen from the beginning where I can format my partitions and hard drives -- again.
What is the problem here? Can Anybody help me on that?
I am using Parallels 3.0.
Thanks in advice.

Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es

HT3986 installing windows 7 with bootcamp It doesn't install, telling me that the partition made by bootcamp is not formatted in NSFT. What to do now?

after having made a partition for windows 7 with bootcamp, it couldn't be installed with the message that the partition needs to be formatted in NSFT.
What to do now?

Start again and follow the Bootcamp installation instructions http://www.apple.com/support/bootcamp/. You can print he instructions from within Bootcamp Assistant.

I can no longer boot up in osx after installing windows 7 with bootcamp

After installing windows 7 with boot camp I am no longer able to access my osx side, I do not receive an option when holding alt when turning on my MacBook

What options do you get? If you don't get any options then you may not be pressing and holding the option key long enough or you are pressing it too early or too late.

In 1 applications, e.g. Norton Virus Scan, and Macware DiskToolsPro, the status bar shows 100% but task is still running. Where it says x of y items complete, x is y. This also happens in Windows 7 with Bootcamp. Please explain.

In >1 applications, e.g. Norton Virus Scan, and Macware DiskToolsPro, the status bar sometimes shows 100% complete but task is still running. Under the status bar, where it says something like "x of y items complete," x is greater than y. This also happens in Windows 7 with Bootcamp. Why does this happen?

In >1 applications, e.g. Norton Virus Scan, and Macware DiskToolsPro, the status bar sometimes shows 100% complete but task is still running. Under the status bar, where it says something like "x of y items complete," x is greater than y. This also happens in Windows 7 with Bootcamp. Why does this happen?

After instaling windows 7 with bootcamp windows fails to connect to internet

after installing windows 7 using bootcamp on mac osx lion windows wont connect to internet it appears to have no drivers installed for ethernet device

create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Advanced Network: Proxy Settings, I uncheck "Auto Proxy detection" and make sure you have the interface you use selected and none others.
"Go into System Preferences - Network - Advanced - Proxies Uncheck "Auto Proxy Discovery", click OK, Apply"
After Unchecking "Auto Proxy Discovery" I also had to Uncheck "Use Passive FTP Mode (PASV)" and then Restart Boot Camp Assistant.
odiggy's comment and tried restarting Boot Camp Assistant. That did the trick, even though the Auto Proxy Discovery checkbox ended up the same as it started. Windows support software is now downloading... if you're downloading to an external drive make sure there's a least 1 GB of free space because the WindowsSupport folder is around 700 MB (format as FAT and MBR).
https://discussions.apple.com/thread/3223773?start=15
Also, Change Domain Name Servers to OpenDNS IP address servers - that should be at the router firewall rather than the OS but may be in both for some people. You may be using the defaults your ISP uses, save those if you want, and try these:
208.67.222.222
208.67.220.220
Make sure you are not using LittleSnitch or Symantec (probably other 3rd party firewall)

Installing Windows XP with Bootcamp .....Problem,Please help

Similar Messages

Maybe you are looking for