Installing WLS on an Intel-pentium using Solaris

Has anyone installed WLS on an intel-pentium pc running Solaris ? Although
it appears that it is a supported combination, I did see a note that said
"it was in the radar". Is there an official line on this ?

It is not supported.
The platform support page for WebLogic Server is located at:
http://www.weblogic.com/platforms/index.html
This page has the latest and greatest information on the platforms that
WebLogic is certified and supported on.
Thanks,
Michael
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
Buy the only book covering J2EE & WebLogic 6:
http://www.amazon.com/exec/obidos/ASIN/0130911119/learnweblogic/102-1778325-
4765749
"Daniel Hoppe" <[email protected]> wrote in message
news:[email protected]..
Hi,
Has anyone installed WLS on an intel-pentium pc running
Solaris ? Although
it appears that it is a supported combination, I did see a
note that said
"it was in the radar". Is there an official line on this ?
Yepp, we tried that as a test setup. Works, but I think we did not have
native IO running.
Daniel

Similar Messages

I can not install Oracle 8i 1.6 Client for NT on an Intel pentium 4 Machine

Hi all,
I've heard the java virtual m installed during the installation of oracle client manager 8i 1.6 on a Intel Pentium IV is bugy till now we could n't bring it to runn. Is there anyone who has the uptodate Patch or work around for that problem?
I will be pleased to read any of the suggestions
Thanks and regards.
Gallican

I think you would need to contact Oracle support to get the CD's if they're still available. 8.1.6 is desupported.
What kind of errors do you get whne trying to use Crystal with Oracle 8.1.7.4? Perhaps this is an ODBC issue?

Solaris 10 on Intel hardware - use of containers - possibly silly question

Greetings,
We are reviewing an implementation of an application using Solaris 10 Containers. All of our reviews of the available documentation do not explicitly state that Solaris 10 (which integrates containers) on Intel includes and can use Containers.
This would not normally be an issue, with something NOT being mentioned, however, the planning resources DO specifically mention that Solaris 10 with Containers works on Sparc hardware.
Could someone please confirm for me, without having us do a trial install, that Sun Containers are available and working on the latest release of Solaris 10 for X86.
Cheers,
Paul

From what I can tell, containers (zones) are supported just fine on the x86/64 systems with the exception of Solaris 8 and Solaris 9 branded zones. Oh, and Linux-branded zones only work on x86/64 systems. Solaris 10 though as a non-global zone works on any S10 host OS.

Intel Pentium D 925+ on MSI 975X Platinum v1, won't install Vista

I have this 2 components - Intel Pentium D 925+ on MSI 975X Platinum v1 - and a licenced Vista Ultimate won't install with them. I had first an Intel Pentium 4 640 and worked great. Than I've changed the CPU to Intel Pentium D 925+. When I first boot in Vista it hanged the system during the green bar sliding. Changed to XP, worked just fine. Tried again to install Vista, after booting from DVD and loading the files needed, the green bar goes again and after 2-3 passes it hanged again. I found that there is the latest bios available 1.4 and made an bios update... Then I retried to install vista.. It worked just fine... Decompressed the files, copied them onto hard drive, and after the first restart , when the screen appears again on installing and says "Completeing installation ..." it hangs again. I just can't pass this phase no matter what I do and tried to install about... 30 times, every install being a clean install, formatting the hard drive. Every single time it hangs just there. Can anyone tell me what is wrong?

I've found the problem if anyone is interesting in knowing it and if maybe someone is having the same problem as me.... just disable EIST (Enhanced Intel SpeedStep Technology) from bios and it will work smooth. Oh PS, and if Vista isn't ment for public use then why was it released by Microsoft in so many versions even a home version? Do you even know what you're saying with that affirmation? Or you're just a end user that is just too lasy to try understanding Vista or even learning where these operating systems are going to? Saying that if it works just fine on XP why should I install Vista...???????

Flash player 10.3.181.14 requires intel pentium 4 2.33ghz,I have intel CPU T2080@1.73ghz processor

I am trying to use Adobe Flash player at home to simply surf the web. For a long time I've been getting prompts to update Flash Player and however much I updated it the prompts kept on poping up. This got so frustrating I decided i'd try to fix the problem once and for all. So I checked the system requirements Adobe recommend for the update I had been downloading and found one of the minimum requirements to be an intel pentium 4 2.33ghz processor. I checked my system and I have only an intel CPU [email protected] processor. My question is, does this explain why I am having so many problems? I've tried to download an earlier version of Flash Player but I always get redirected to the 10.3.181.14 version. How it has come to this I am not quite sure but I must admit I have removed the Flash Player from my computer at the moment and I'm worried that it was a mistake because will I ever get a working version again? I am running Windows Vista 32bit and Internet Explorer 8 32bit. I am out of my depth so please be gentle!

You might have better luck if you post your question in the Flash Player forum...
http://forums.adobe.com/community/webplayers/flash_player

To run OHS at port 80 using solaris role based access control

Hi.
I already know & have done setuid root to ohs/bin/.apachectl to allow ohs to listen to port 80. Now on a new OFM 11.1.1.4 install, I want to use Solaris Role Based Access Control (RBAC) instead. Is it possible? RBAC does work as I can run a home built apache2 httpd at port 80 withOUT suid root.
On Solaris 10, I enabled oracle uid to run process below port 1024 using RBAC
/etc/user_attr:
oracle::::type=normal;defaultpriv=basic,net_privaddr
Change OHS httpd.conf Listen from port 8888 to port 80.
However, opmnctl startproc process-type=OHS
failed as below with nothing showing in the diag logs:
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=truffle:6701
0 of 1 processes started.
ias-instance id=asinst_1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
ohs1/OHS/OHS/
Error
--> Process (index=1,uid=187636255,pid=25563)
failed to start a managed process after the maximum retry limit
Thx,
Ken

Just to add my two cents here.
The commando used on Solaris to assign the right privilege to bind TCP ports < 1024 is:
# usermod -K defaultpriv=basic,*net_privaddr* <your_user_name>
Restart the opmnctl daemond.
After that OHS/Apache user can bind to lower TCP ports.
Regards.
Edited by: Tuelho on Oct 9, 2012 6:05 AM

Installing oracle 10g release 2 on spark solaris!! urgent help!

hi guys!
Am installing oracle 10g r2 on spark sun solaris. I did install the software without any pb, but when installing the database using dbca, I have this errors.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 28
ORA-27301: OS failure message: No space left on device
ORA-27302: failure occurred at: sskgpcreates
Edited my kernel parameters and in the /etc/system file, ai've added
set noexec_user_stack=1
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmsl=256
set semsys:seminfo_semvmx=32767
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
Space aint an issue and dont know how to over come this error!
Should ai just install the db using scripts and run the neccessary .sql scripts instead of going through dbca?
junior DBA in distress.

This appears to be because of low semaphores setting. Did you reboot your server after making the /etc/system parameter changes ?
-Ramesh

Cannot install drivers. No Intel(R) Adapters are present in this computer

Cannot install drivers. No Intel(R) Adapters are present in this computer
Cannot install drivers. No Intel(R) Adapters are present in this computer
Reads the error message I purchased an RaLink USB Wireless adapter IEEE 802.11 b installed in an XP Pro system, an Intel D925XEBC2 MB with A P4 CPU 3.80 GHZ
I have 4 gigs of RAM installed but it reads only 2.87 RAM on system properties
I installed the RaLink Drivers and the Ralink interface. I get a strong signal and see that the wifi is there but cannot connect. The 1394 Net adaptor #2 is showing as is the USA wireless card
I was asked to install the PIN which I assumed meant the network security but my keyboard will only input numbers not the letters, otherwise the keyboard operates properly on notepad but not on the RaLink software
Under other devices it shows both the Ethernet controller and the Network controller with a question mark "?".
I have tried uninstalling and starting the computer several times but they will not install correctly.
The windows interface shows no wi fi system at all. After going back and forth now both windows and the RaLink interface shows no wifi system.
When I went to https://downloadcenter.intel.com/detail_desc.aspx?agr=Y&DwnldID=18717 and downloaded the 32 bit file and tried to install it I got the error.

Hi there,
you're in the wrong forum, but I'll try to guide you.
(a better forum for your question would likely be this:
http://social.answers.microsoft.com/en-us/windows/forum/networking?tab=Threads )
Your RALink wireless adaptor is not manufactured by Intel, that's why Intel driver download won't help you.
You need to go here (RALink is now Mediatek) to get the drivers for your adaptor
http://www.mediatek.com/en/downloads/
Good luck! :)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

I can't Install Windows 7,8,8.1 using bootCamp Please Help

I am using macbook pro intel i5 2.4 GHz cpu 13 inch late 2011 MODEL,I can't install windows 7,8,8.1 using bootcamp,because windows install disk creator option not available in my boot camp Assisstant app,so i can't install windows from USB Pendrive and Even Superdrive,My model ID MacBookPro8,1. Boot ROM: MBP81,0047.B27, SMC Version :1.68f99 OS Yosemite 10.10.2 Please any one tell the solution to solve my problem. SERIAL: C0*****13
Note:My Superdrive is damaged and not working so i using external dvd-rw,
< Personal Information Edited By Host >

It shows only two options and it recognise my ext dvd-rw then i partition for boot camp partition but after the partition that restarts automatically then blank screen displayed infinitely give me solution

How to install WLS 10.3.3 and OPFRD 11.1.1.2 + patch 11.1.1.3

I have Windows 2003 SP2 server which meets Oracle requirements. Can anybody explain me step by step how do to that? I have tried, but failed. I couldn't configure domain. On clean OS i have installed WLS withotu configure. Than I installed OPFRD 11.1.1.2. After that I installed patch 11.1.1.3. Everything passed OK w/o problems. Than I strated config.bat. I fill in the details and configuration begins. But stops on first step, when domain should be configured. How to solve the problem?
Thx in advance.

Thanks Rene, but as I said we are not using the same version of WLS and OSB so in that case is there any option that which version of OEPE i should download which support these two versions of WLS 10.3.5 and OSB 11.1.1.4.0.

How to install owb server-side software on UNIX Solaris (SPACR-64)?

Hi there,
How to install owb server-side software on UNIX Solaris (SPACR-64)?
I've read the install guide
and it mentions
3. Start the installer by entering the following at the prompt:
cd mount_point
./runInstaller
I don't have access to any graphical interface on the UNIX box e.g. x-windows nor any cd with the software, just the solaris software downloaded from web - does this include the runinstaller
and is the runisnatller just a command line interface?
I hoped I would be able to download the software from oracle website and then simply run the a setup scrip?
Is it possible to do this? Would I simply substitute cd mount_point to cd <directory I put software)
I've never ran oracle universall installer on UNIX before.
Many Thanks
Edited by: user575470 on Feb 15, 2009 7:54 AM
Edited by: user575470 on Feb 15, 2009 8:06 AM

Hi,
You can install the server-side software from the downloaded software.
You don't need the CD
You do need an X-windows client on your computer to connect to the server OR work directly on the server.
Without X-windows you cannot start the Oracle Universal Installer.
Maybe there is a command line installation, I have never used this.
I hope this helps.
Regards,
Emile

I downloaded Firefox 5.0. Firefox will not open. States running offline. I have a Intel Pentium/Windows XP system.

I downloaded Firefox 5.0. Firefox will not open. States running offline. I have a Intel Pentium/Windows XP system.
This also happened when I tried to download Firefox 4.
Firefox 3.6.18 works fine

You may need to delete the Firefox program folder before (re)installing the latest Firefox.<br />
In case you still have problems after installing then check your security software.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*http://kb.mozillazine.org/Browser_will_not_start_up

After installing WLS, oracle cannot access directory

We have installed WLS many times on RHEL 5.6 and cannot determine why, but on occasionthe oracle user loses the ability to access /opt directory. The directory structure is listed as only question marks.
[oracle@racparticipant opt]$ ll
total 36
?--------- ? ? ? ? ? IrsamInstall
drwxr-xr-x 12 root root 4096 Jan 5 13:14 likewise
drwx------ 2 root root 16384 Jan 5 12:46 lost+found
?--------- ? ? ? ? ? oracle
?--------- ? ? ? ? ? oraInventory
?--------- ? ? ? ? ? sun
drwxr-xr-x 7 root root 4096 Jan 5 13:12 Symantec
Once this occurs, the oracle user cannot access this directory or its subdirectories. If I login as root, everything is fine.
We have not found anything online regarding this or anything useful...
Ideas?

Form the "id" output showing "context=user_u:system_r:unconfined_t:SystemHigh" I can see you have SELinux enabled.
Unfortunately I'm not very familiar with SELinux. The Oracle recommendation is usually to have it disabled, not supported, at least prior to 11gR2. You may have to modify the security context of the /opt directory using the chcon command to allow access (http://wiki.centos.org/HowTos/SELinux). Firewall and SELinux are enabled by default and more changes are most likely required for Weblogic to work.
What happens if you disable SELinux or set it to permissive and try again? You can disable SELinux by editing /etc/selinux/config and change the SELINUX line to SELINUX=disabled. Then reboot the system and try again. Alternatively you can also use the kernel "enforcing=0" parameter or use "echo 0 >/selinux/enforce" to temporarily disable enforcement, but I guess disabling it in /etc/selinux/config is easier.
Edited by: Dude on Jan 8, 2012 1:46 AM

Any one used /Using Solaris on HP Pavilion 6545C Computer?

Hi,
If Any one has tested or used or using Solaris on HP Pavilion 6545C computer, Please let me know. I am planning to Install Solaris on my machine.
Thanks in advance,
Raj

Hi Pansarah1:
Thank you for your inquiry.
I am sending you a document on "Computer Starts but Monitor Remains Blank (Windows 8)" click here.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

PIA install fails in PTools 849,WL92MP3 on solaris 10

Hi All.
cant install PIA, and the error states:
elect 1 to install, select 2 to change your values or select 3 to exit.
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1]
JAR LOCCC----->/opt/psoft/fin88dmo/setup/PsMpPIAInstall
JAR LOCCC----->/opt/psoft/fin88dmo/setup/PsMpPIAInstall
Creating domain...
0 % complete
20 % complete
JAR LOCCC----->/opt/psoft/fin88dmo/setup/PsMpPIAInstall
JAR LOCCC----->/opt/psoft/fin88dmo/setup/PsMpPIAInstall
Warning: /opt/psoft/fin88dmo/webserv/fin88dmo/applications/peoplesoft/PSOL.war/WEB-INF/lib does not exist. (PSChangeSharedLibPermission)
INSTALL FAILED!!!
The InstallShield Wizard has failed to install PeopleSoft Internet
Architecture. Please see the following log files for the error messages:
/opt/psoft/fin88dmo/webserv/silent_install.log
Choose Finish to exit the wizard.
Press 3 to Finish or 5 to Redisplay [3] 3
could not utilize start class: com.installshield.wizard.Wizard
Exception in thread "main" PSInstallPanel$PsftAntExit
tried:
-This is a standalone web server installation. It is missing files which are only installed when app server is also selected at
the initial installation. Install the app server and Tuxedo (required by the app server) and the PIA installation will succeed.
-Same PSOFT userid is used to install WLS and PIA.
still PIA install fails, any thoughts...
Thanks

Try this one too if it applies to your installation requirements: Doc ID 658475.1
ISSUE:
PIA deployment fails with the following error:
Warning: /apps/psoft/s891t849/webserv/s891t849/applications/peoplesoft/PSOL.war/WEB-INF/lib does not exist. (PSChangeSharedLibPermission)
SOLUTION:
The error message, unfortunately, happens to be a generic error message. It could be due to several configuration environments:
(1) The issue could be caused by trying to install PT8.49 as a Peoplesoft user and the web server is another user on a Unix machine. The solution is to try to use the same user to deploy PIA as the one who installed the web server. Deploying PIA with another user other than the one who installed the web server will have file permission problems on the web server directory.
There are some file permission issues when trying to use a user other than the one who installed the web server. During installation, the installer writes script files to a tmp directory.
a- You can try and create a tmp subdirectory that is writable by the user ID you are logged on when installing PIA in there,
b- and then at the same time invoke the following command to force using the tmp directory:
./setup.<platform> -is:javaconsole -is:tempdir /...../tmp -console
c- One CT of mine added the Peoplesoft user to the web server group and that helped him solve the issue.
(2) It could be due to using an old version of PT8.49.xx. Always install the latest patch, available from CC.
(3) It could be due to not setting DISPLAY=0.0 before the you begin the installation.
It has been stated in page 84 of the (Enterprise PeopleTools 8.49 Installation) manual the following:
Note. ** SET THE DISPLAY- for the UNIX box $> export DISPLAY=0.0. Set this env variable every time you use the InstallShield Wizard.
(4) It could be that the installer is seeing an incorrect version of Java on the environment. Correct the path to the Java home before deploying PIA on the web server.
Change the directory to <PS_HOME>/setup/PsMpPIAInstall and run one of these commands:
setup.<platform> -console -is:javaconsole
or
<JAVA_HOME>/bin/java -cp setup.jar run -console
where <JAVA_HOME> is the directory where the JRE software is installed.
The default is <PS_HOME>/jre.
(5) It could happen when you try to install PIA remotely. Please perform the installation locally on the box.
(6) It could happen when you try to use GUI mode for the installation. Use console mode only.
(7) For Websphere 6.1.0.19 on AIX5.3, if you get the following error when trying to install PIA Single Server for websphere from i/setup/PsMpPIAInstal,
"/prod/psft/pt849/setup/PSMpPIAInstall/scripts/waspiainstall.sh[12]: ant: not found. ....... ........ Warning: /prod/psft/pt849/webserv/peoplesoft2/installedApps/peoplesoft2NodeCell/peoplesoft2.ear/PSOL.war/WEB-INF/lib does not exists. (PSChangeSharedLibPermission)
The issue could be solved after adding WAS_Home to path in psconfig.sh file and removing ctrl+M in ant file in WebSphere directory.

Installing WLS on an Intel-pentium using Solaris

Similar Messages

Maybe you are looking for