Installing WRT54G with Mac OSX and getting a password
Ok, I just hooked up my wireless router to the internet modem (it's a motorola surfboard) and I believe my mac automatically picked it, now I'm am trying to add a password. How do I make sure my mac can pick it up and how can a program a password ? Thanks ! PS: I'm not very computer savy, so if it is at all possible to break it down into like installing a router for dummies that would be grat. Thanks !
It does not matter for the Operating System ..... you can install the wireless router ....
Open Safari browser .... type 192.168.1.1 ....leave username blank & in password use admin ...
Click on the Wireless tab on the Setup page- Here Wireless Network mode
should be mixed- Provide any non linksys network name ....
Name (SSID) box- Set wireless channel to 11- And wireless SSID
broadcast should be Enabled and then click on "Save Settings" >>Now
Click on the Sub tab under wireless > "Wireless Security" Change the
Wireless security mode to "WEP/WPA"...have a note of the key ... click save settings ...
Similar Messages
-
Installing WRT54G with both Vista and XP OS Access
First, I'm a new member of this forum.
I'm am preparing to update to a new Linksys WRT54G router. We have one computer (HP 8100N) which has Microsoft Vista Home Premium installed; but our other 3 computers all use Windows XP SP 2. The Linksys WRT54 G and Linksys Router are all plugged into the Vista machine ---with one other PC (Gateway) and 2 laptops (Toshiba and a Dell) all connecting wirelessly.
RIght now things work ok --- but it's been 5 years since I've made any major changes. However, I've experienced a rash of virus challenges lately and suspect somehow the router has been compromised; hence my desire to completely change it out. At the same time, I'm not too excited about creating problems with the Vista and XP connectivity.
Any recommendations would be appreciated. Apology to Forum if this is posted twice; it appeared not to go through the first time.
Thank you very much
Krackatoa 3Chris:
I have experience with both, Vista and XP. I use a MBP 15" 2GB RAM and I have had great success with both. I really no not overload my system. I have software to connect to the internet and full office 2007 Suite. So, mostly internet and productivity software. No major issues with either.
Axel F. -
Installing Windows 8 Along With Mac OSX and Win7
Ok I want to install winows 8 on my macbook pro alongside mac os x and windows 7 but I already have the maximum primary partitions.
Can I delete the 620MB Primary Partition?It does not matter for the Operating System ..... you can install the wireless router ....
Open Safari browser .... type 192.168.1.1 ....leave username blank & in password use admin ...
Click on the Wireless tab on the Setup page- Here Wireless Network mode
should be mixed- Provide any non linksys network name ....
Name (SSID) box- Set wireless channel to 11- And wireless SSID
broadcast should be Enabled and then click on "Save Settings" >>Now
Click on the Sub tab under wireless > "Wireless Security" Change the
Wireless security mode to "WEP/WPA"...have a note of the key ... click save settings ... -
HP 7520 "Scan to Computer" not working with mac osx and wireless
Just installed from the disc, and then upgraded with latest version from HP site. Error message on 7520 printer is "No computer found". I am definitely connected to the same wifi network. Scan works okay if started from the iMac, bit not the other way around.
Hi MsChanChan,
You can remove the printer by clicking the "-" symbol in the printer list. After removing the printer, perform a restart and reinstall the software that you originally used to install the printer.
Don't forget to mark a post as solved if it fixed your issue -
I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....
Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds. -
i just wrote over firefox 3.6 with 5.0 for my mac OSX and discovered my mac won't support it. Is there a way I can recover all my lost files and get the old version back?
You can download and install Firefox 3.6 from http://www.mozilla.com/firefox/all-older.html
-
Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1
Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
PaoloSomewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations. -
I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB. lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive? I opened the hard drive and from the column on the left of the menu I've selected "search for" and under that " all images" then "all documents" I've deleted a few files from each. Are documents and images that I have deleted from here also deleted from the folders on my desktop?
You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Delete any other mail in your Junk folders. Also, look through your Sent Mail to see if there is anything that can be deleted.
Other things you can do to gain space.
Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
This app will help you locate files that you can move/archive and/or delete from your system.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck! -
I have a Macbook with Mac OSX 10.5.8 and i have a new hp printer that recommends version 10.6 or 10.7. Do i need to upgrade, what version, and how do I get and install this upgrade? Thanks
Full instructions here:
https://discussions.apple.com/thread/4540761 -
When downloading a pdf file I get a message that I must download Adobe Reader. When I do that I am told that it is already installed. Why can't I use it if it's already installed. I-Mac OsX 9.3
g -
I was able to fix the problem with some help from Apple. Whenever I last downloaded Reader, I apparently didn’t complete the process by accepting the Reader contract. I was able to go right to that point in the process and complete the installation. The messages that I needed Reader but it was already installed were quite confusing. It would have been nice if the Adobe installation process that I was re-trying this morning had been able to detect a partial installation. The Troubleshooting page almost had me doing some ridiculous things that wouldn’t have helped.
MP -
I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
Lost ical and the ical 1.5.5 is not working with mac osx 10.5 ?
lost ical, would like to download it, as in the installation disk, I'vent the possibility to do it . The problem is that the ical 1.5.5 is not working with mac osx 10.5 ?
biomecasport,
Welcome to Apple Discussions.
1. Insert the Leopard Installation disk into the computer.
2. The disk will appear on the desktop.
3. Double click on the "Optional Installs" folder.
4. Double click on the "Optional Installs.mpkg."
5. Click on (Continue) in Introduction.
6. Click on (Continue) in Software License Agreement.
7. Click on (Agree) to agree to the terms of the software license agreement.
8. Click on the disclosure arrow ▶ next to Applications.
9. Select (✓) iCal.
10. Click (Continue).
11. After iCal has been reinstalled, download and install the Mac OS X 10.5.8 Combo Update to bring iCal up to the most recent version. -
Compatibility issues with Mac OSX Leopard 10.5 and Word 2004 11.6.3 on G5 PowerMac?
Are there compatibility issues with Mac OSX Leopard V. 10.5 and Word 2004 11.6.3 when installed on a PowerMac G5? I understand the Leopard upgrade is okay on the later Intel Mac, but what about my G5 PowerPC Mac?
I do not use Microsoft Excel much but when i do use it it works fine on my G5. my powerbook has excel to but sometimes freezes on the powerbook. but not the G5 so give it a try you can always uninstall it if it does not work good
anitabean wrote:
Thanks so much for your positive reply! Are you a big user of Excel? That's where I've heard people have had trouble, with cells locking up and so on.
Crossing my fingers and loading Leopard....
Cheers. -
Have a 27 imac desktop with mac osx 10.5.8, finally got out of grey and black screens etc. is there anything I can do to prevent all this from happening again when I shut down? Or before I shutdown? TIA.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
used to manage backups and to restore backups. Time Machine
requires a backup drive that is at least twice the capacity of the
drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
1. Cool Drives
2. OWC
3. WiebeTech
4. Firewire Direct
5. California Drives
6. NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver. -
Since the upgrade to 4.0.1, both of my mac osx computers get multiple popups and popunders, despite the block popups being enabled, as well as slow tracking(at regular card game sites, and frequent freezing of open windows.
Honestly I would never run both Win 7 & XP at the same time in a VM. 7 needs at least 4GB to run properly and uses more resources then XP.
I personally use VMware Fusion and XP. At this time there is no software, that I'm aware of or use, that does not run on XP. So for my Mac Win VM purpose I only run XP with the software in need to use in Windows. This work very well for me. I have 2 CPUs and 3GBs of RAM assigned to XP. Leaving the other 2 CPU cores, 4 HT cores, and 5GBs of RAM for OS X.
Not sure why you need, or want, to run both versions of Windows at the same time. I don't see the need as stated above.
Maybe you are looking for
-
Solaris 9/Installation in UltraSparc
Hi, Im trying to install a Solaris 9 OS in a Sun Fire v240 machine. First I introduced a clear SCSI HDD and the Installation DVD in the DVD PCI device. Whe I did 'boot' in the OPROM prompt it seemed 'Bad magic nuber in disk label. Cant open disk labe
-
HT1451 My playlists are gone on my PC (Windows). No iTunes Library.xml file,
My playlists, and song history are gone. I do not have a Library.xml file. My playlist is still on nother PC via the cloud. How can i recover my playlists and song history; I have "ranked" over 7,000 songs!
-
As noted in question, sites I have bookmarked recently will not be listed in my bookmarks after a couple of days although sites I bookmarked a few months ago remain stable and visible. The total quantity of bookmarks seems to remain about the same ca
-
Modelled Deadline Monitoring - Solution for the same
Hi All, I have a requirement where i need to use modelled deadline monitoring. My requirement is that when a work item is sent to a specific group. If that group does not respond to the work item in 3 days i need to send an escalation mail to th
-
Dear all. I have a Table with 4 million reocords, Is there any way to view only the last 400 commands. Is there a command in oracle that gets the first 400 or last 400 records Kindly Suggest