Installing X fi Extreme Music On To Windows 7 64 Bit?

I wan't to install my old extreme music card,but now that I have windows 7 64 Bit do I start from the original disk(XP) I think or just use the updatted drivers for windows 7?I wan't most of the original software....
Thanks

Please refer to my reply on your post under Windows 7.

Similar Messages

  • I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".

    I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error   "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""

    Repair your Apple Application Support.
    Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

  • Cannot install Boot Camp 3.2 upgrade for Windows 7 64 bit

    I recently installed Windows 7 64 bit on my macbook. I also installed Boot Camp 3.0.1 after Windows 7 installation, however, WiFi did not work. Therefore, I needed to upgrade to the latest Boot Camp 3.2. However, when I tried to install Boot Camp 3.2 upgrade for Windows 7 74 bit, I got an error message saying that I needed Boot Camp 3.1 installed first. I CANNOT find Boot Camp 3.1 upgrade for Windows 7 64 bit on Apple website at all. Can someone please help me on this? Is there a way to get the complete Boot Camp 3.2 package that can simply be installed on version 3.0.1??

    here is the link to bootcamp 3.1 for windows 7 64 bit http://support.apple.com/kb/DL1336 .. and no there is no package that can be applied to the windows side to go from 3.0.1 to 3.2

  • Trying to install Acrobate 8 Standard on PC with Windows 7, 64 bit. During the installation I was asked to provide "File Adobe PDF.dll for Windows Vista. How can I obtain the required file?

    Trying to install Acrobate 8 Standard on PC with Windows 7, 64 bit. During the installation I was asked to provide "File Adobe PDF.dll for Windows Vista. How can I obtain the required file?

    Nothing in the Acrobat 8.x product family is compatible with Windows 7 (or any contemporary OS).
    The Acrobat 8.x product family passed into End of Support way back -- (November 2011).
    The current release of Acrobat (XI) is compatible in Windows 7.
    Be well...

  • Fail to install Acrobat Professional X of CS6 on windows 7 32 bits

    I  to install Acrobat Professional X of CS6 on windows 7 32 bits or Vista 32 bits, can anyone help for the error shows  below? Many Thx!
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ... WARNING: DW024 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 3 error(s), 1 warning(s)
    WARNING: DW024: The payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 requires a UI parent with following specification:
                    Family: Photoshop
                    ProductName: Adobe Photoshop CS6 Core_x64
                    This parent relationship is not satisfied, because this payload is not present in this session.
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed
    Tommy

    Please check the solution provided under the below articles and check if that helps. Few users have resolved their issues by following it.
    http://forums.adobe.com/message/4648705
    Also, try running the below Microsoft fixit and check if that works.
    http://go.microsoft.com/?linkid=9708107
    If still same issue, follow "http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-produc ts.html"
    [Moved the discussion to Acrobat Installation & Update Issues Forum]

  • Cannot Install itunes 9.1.1.12 on Windows 7 64-bit

    I keep getting the same error whenever I try to install iTunes: +This iTunes installer is intended for a 32-bit version of Windows. Please download and install the 64-bit iTunes install instead.+
    According to this link: http://support.apple.com/kb/DL1037, it is the 64-bit installation software.
    So I tried this as suggested by Microsoft: +Use the Windows Installer Cleanup Tool and see if it helps. Click here to download. Then try to install the most current version of iTunes.+
    I did that...but nothing.
    So I tried this suggestion...+Right click your mouse, next you will see a drop down menu and in the middle you will see "Install as Administrator" Left click on that option and let the install begin.+
    That didn't help either. I got the same error message of the 32-bit thing.
    Each time I try to install, I make sure all Apple sofware has been removed from my computer, even any iTunes files in my Music Folder, etc. Then I reboot. I even cleared all of my internet caches.
    I'm not sure what else to do. This is a new computer, we got it about four days ago.

    Okay, the bookkeeper's office has firefox, so husband downloaded it using his computer. But once I tried to install on my home computer, I got the same 32-bit message. Something you mentioned did catch my attention: iTunes64setup.exe
    This is what the properties read on the installer:
    File Version: 9.1.1.12
    Original File Name: iTunessetup.exe
    Is this where the problem is? Should it say iTunes64setup.exe?
    He has been clicking on 64-bit link. But it seems to not be downloading an iTunes64setup.exe file, but is instead downloading iTunessetup.exe. Does this have to do with his work computer not being 64-bit? Do you have to download from a 64-bit computer?
    Again, thanks for responding. I really appreciate it.

  • Can I install iTunes in separate user accounts on Windows Vista 64-bit?

    Hi,
    My wife and I use different user accounts on Windows Vista 64-bit. Before I go and mess things up on my computer, I wanted ask some questions:
    1) Has anyone has successfully installed iTunes to multiple user account?
    2) If so, has anyone successfully shared the same music root directory for 2 different iTune instances.
    I'm thinking with iTunes very tight integration with the music files (for indexing/searching, etc), that it would be bad to have add/change/delete on the same music root from 2 independent installations.
    Experience OR opinions welcome!

    ) Has anyone has successfully installed iTunes to multiple user account?
    You don't install the iTunes application more than once. Each user account in Windows will have its own iTunes library.
    If so, has anyone successfully shared the same music root directory for 2 different iTune instances.
    Many people have done so. This should help:
    iTunes: How to share music between different accounts on a single computer
    Note that iTunes has no folder-watching capability, so if you add a track in one user account, the other user will have to add that new item manually, either by using the Add To Library command or dragging the item into the iTunes window. There are a couple of potential solutions from other developers, though:
    http://albumbrowser.klarita.net/iTunesFolderWatch.html
    http://www.lifehacker.com/software/itunes/hack-attack-automatically-sync-itunes- to-any-folders-175161.php
    Thanks to Meg and Hudgie for the tips.

  • Installing LabView 8.2 runtime engine on Windows 7 64-bit

    We have a product built on LabView 8.2
    For a couple of years, we have been distributing this product on Windows 7 64-bit systems with no trouble at all.
    Today, we received a customer complaint indicating that the LabView 8.2 runtime engine cannot be installed on Windows 7 64-bit.
    Our verification team has confirmed this to be true.
    Interestingly, we have several Windows 7 64-bit computers with the LabView 8.2 runtime engine already installed.
    How is this possible?
    Has something changed in Windows that no longer allows the LabView 8.2 runtime engine?
    We are confused by the fact that this appears to be a new problem and the runtime engine did, at some point, install correctly on multiple Windows 7 64-bti computers.
    Any thoughts would be extremely appreciated.
    Attachments:
    lv_install_error.jpg ‏22 KB

    No, i dont think the 8.2 installer is corrupt, but it uses the Windows Installer service, which according the image has some problems. Maybe it recently updated? It's incompatible with that old installer so you need to downgrade it? It's corrupted and needs some fix?
    /Y
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

  • ITunes will not fully install, it says i need bonjour permission (windows 7 64 bit)

    I recently got my new desktop computer. It is an hp pavilion with Windows 7 64 bit operating system. I began adding on the programs i wanted on my computer after starting it up a few days ago and found that everytime i try to download iTunes (64 bit) for windows it makes it through almost the whole process before it tell sme there was an error with ProgramFIles(x86) Bonjour mDNSResponder and something about how i may require permissions, i have gone on many websites trying to find the solution to my problem. I found out how to change the permissions on programs but when i try to do that to Bonjour it tells me i dont have the proper permissions to even get into the security settings. Please Help, i have been without a computer for several months which has gotten in the way of my iPod updating and all around music/movie enjoyment

    everytime i try to download iTunes (64 bit) for windows it makes it through almost the whole process before it tell sme there was an error with ProgramFIles(x86) Bonjour mDNSResponder and something about how i may require permissions
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • How to install the HP 1010 laserjet printer in windows 7 (64 bit) os pc?

    I have windows 7 (64 bit) OS pc and i bought HP laserjet 1010 printer very early when i used to use windows XP. Now i got problem. I cannot find its driver for windows7 even you said that the is no driver for windows7. Then what should i do? My printer may be useless. I cannot change the OS of my pc as i am friendly with windows7. Please help me in this regard.

    Hi,
    just found your post...
    To install your HP1010 on Win7do the following:
    Start
    Devices & Printers
    Add a printer
    Adda local printer
    Use an existing port: DOT4_001 (Generic IEEE...)
    Next
    Pick HP from manufacturer
    Select HP LaserJet 3055 PCL5
    Next
    Name the printer something to your liking
    Finish (or so, just follow the prompts)
    Here you are!
    Works every time for me, never had a problem from any application.
    I don't know how this forum works and if i am notified if you reply or anyone else posts on this thread, so i try to check it again soon to check if you left a message.  Be with me...
    Matt

  • Unable to install iTunes 10.5.0.142 on Windows 7 64 bits system

    I am not able to install the latest version of itunes, version 10.5.0.142, released by Apple last week.
    I think it is important to note that there are three pending updates on my system (Windows 7, 64 bit), which keep on failing again and again no matter what the mode of update (manual via microsoft website or automatic via the program provided by microsoft). These are:
    1. Security Update for Windows 7 for x64-based Systems (KB2556532)
    2. Security Update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)
    3. Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243)
    The methods that I have tried to install the latest version of itunes (all have failed as of now):
    a. Automatic via the previous version of itunes. This tries to download and install itunes in parts, but ultimately leads to the error originally pointed in this thread. Failed.
    b. Uninstalling the previous version of itunes completely as mentioned here: http://support.apple.com/kb/HT1923 and also using Microsoft Fixit and then trying to install the new version. Failed.
    c. Uninstalling all but apple software update, and then trying to update manually from the software update file available in c:\Program Files (x86)\Apple Software Update folder. Failed.
    d. Uninstalling all the versions of visual c++ (2005 and 2008), and then trying to install the latest version of itunes. Then re-installing the latest versions of c++ (2005, 2008 and 2010) along with updates but three as pointed above, and then trying to install the latest version of itunes. Failed.
    e. I have tried various permutations and combinations of keeping the firewall, antivirus and even the internet off and on. Failed.
    The combination of errors that I have received:
    - An error occurred during the installation of assembly ‘Microsoft.VC80.CRT,version=“8.0.50727.6195″,type=“win32,publicKeyToken=“1fc8b3 b9a1e18e3b”,processorArchitecture=“x86”. Please refer to Help and Support for more information. HRESULT: 0x80073712
    - Error 7 indicating installation of microsoft .net framework 4.0 for me (http://support.apple.com/kb/TS3074) and
    - Error 2 - "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2)
    However, I have seen on some websites that people have been able to install the latest version of itunes on their windows 7 64 bits system (surprising, but yeah).
    I would appreciate any pointers as to:
    ?1 How do I install the latest version of itunes on my system.
    ?2 If the steps are not included in the solution to ?1, how do I update 1., 2., and 3. mentioned above.
    ?3 If I am able to install itunes 10.5.0.142 on my windows 7 64 bit, would I be able to successfully my iPad2 to iOS5?
    Many thanks.

    I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
    Apple helps you find Original Sin with the Windows.

  • Why can't i install iTunes 11.0.1.12 on windows 7 64 bit ?

    how can i install itunes on windows 7 64 bit ?

    Download the 64bit version from here.
    http://support.apple.com/kb/DL1615

  • Install oracle 10.2.0.5 on windows 7 32 bits

    Hi all ,
    I want to install oracle 10.2.0.5 on windows 7 (32bits) but in the websit I found <B>"Oracle Database 10g Release 2 (10.2.0.5) Enterprise/Standard Edition for Microsoft Windows (64-bit Itanium)" [http://www.oracle.com/technetwork/database/10201winsoft64-090455.html] </B>, and in the documentation I found : <B>"Oracle Database and Oracle Database Client 10g Release 2 (10.2.0.5 or later) are supported on Windows 7 (32-bit and x64)."</B>.
    Could you please tell me whether this oracle client for win 7 32bits or give me the link wher I can download oracle for win 7 32bits.
    Many thanks,

    10.2.0.5 is a patchset that you will need to download from My Oracle Support. You will need a valid CSI with Oracle for you to download the patch. I suggest you to install the 11gR2 Client on Windows 7.
    Can you please tell me which version of Oracle Server will you be interacting with using the 10.2.0.5 Client.

  • How to install HP Color LaserJet 4600 Networked to Windows 7 (64 bits) ?

    I am running windows 7 64 bit trying to connect to a HP color laser jet 4600. We have tried multiple times to get a Notebook to load the driver. Everything works and asks to print a test page. When you press print test page nothing happens and nothing will print. 
      This is a working printer. It is presently hooked to a network and it works from it. I am trying to make it work from my notebook. I am using a ethernet cable wired directly to the Jetdirict card. 
      Do I need to set up a network. I know the IP of the printer and can not access it from the Notebook.

    dan4757 wrote:
    I am running windows 7 64 bit trying to connect to a HP color laser jet 4600. We have tried multiple times to get a Notebook to load the driver. Everything works and asks to print a test page. When you press print test page nothing happens and nothing will print. 
      This is a working printer. It is presently hooked to a network and it works from it. I am trying to make it work from my notebook. I am using a ethernet cable wired directly to the Jetdirict card. 
      Do I need to set up a network. I know the IP of the printer and can not access it from the Notebook.
    This should work for you.  I've installed several printers using a Jet Direct this way:
    Install the printer manually.  Go into Devices and Printers -> Click "Add a printer" then select "add a local printer" and select the option for "Create a new port - Standard TCP/IP Port" and click next.  Type the IP address of the printer into the Hostname/IP Address field then click "next" -  Choose Hewlett Packard Jet Direct from the Standard drop down menu then click next.  You will need to select your printer model/driver from the list and then click next.  

  • Installing HP Laser Jet 5 driver for Windows 7 64-bit or 32-bit

    I had an issue with installing an HP LaserJet 5 printer to a WIndows 7 64-bit box.  I thought I would post my experience and solution to this problem so that others can quickly resolve similar issues.
    If you connect as I did with a Parallel Printer-to-USB cable, then Win-7 searches for drivers automatically. But none werre found. However, using "Add Printer" via Control Panel/View Devices and Printers/Printers and Faxes, then left click starts the process for finding and installing the HP driver needed.
    No need as others have suggested to go to HP Support Center to install their Universal Printing PCL 5 driver found here:
    www1.hp.com/...Universal Print Driver for Windows PCL5/
    Hope this helps speed you on your way!

    Thanks for sharing your tip RatioCynic!  That's what this forum is all about!
    Happy printing!
    Thanks!
    Tara
    **Although I am an HP employee, I am speaking for myself and not for HP.

Maybe you are looking for