Installing x64 and x86 drivers for a HP Laserjet p1505n printer on Windows Server 2008

How do you install both x64 and x86 drivers for a p1505n on a 2008 server? I have now managed to install 64 bit drivers but can't install x86 drivers in the normal way using Additional Drivers from the Sharing tab. I am also trying to do similar for a laserjet 1022n printer.

On the 2008 Server x64 I installed the FULL driver package 163mb.
I installed the HP P1505n on Server 2008 and made sure that was working.
Then I went back in and did the Additional Driver thing and when it asked for the driver for x86 I went to the
C:\hp_P1000_P1500_Full_Solution folder and scrolled to the bottom and there was the x86 XP driver.
I hope this helps someone.

Similar Messages

How to Stage directory for Oracle EBS R12.1.1 on Window Server 2008 ?

Hi Every Body,
1- How to Stage directory for Oracle EBS R12.1.1 downloaded from e-delivery.com on Window Server 2008.?
-- I have download all files from e-delivery and check the md5 and all files are OK.
I extracted the entire files with winrar program to the same directory and during the unzipping I was notified to replace these files (dvd.label and component.label) and I agreed each time. So >>
2- Was that a problem ?
-- I have setup vc++ from VS6 , the sp6, cygwin , ... and set up the active directory and the domain.. and all other requirements.
BUT when i started the ebs set up it raise the "*Os User and Group Check*" error.
even if I am the only user and sure I am the Administrator. and also I run this Command to be sure
C:\>net localgroup administrators and it said that the administrator is one of the administrators group.
3- Somebody said that I have to change the temp and tmp folder to be on c:\ drive >> might this solve the problem?
thanks in advance.

Hi,
Most of the instructions you have mentioned , already was configured.
except for the tmp and temp directories.
And even I changed them from System Properties >> Advanced >> Environment Variable under User variable for Administrator and System variables , the problem still exist Os User and Group Check .
I attach the conf_VIS.txt file because I thought it may help.
http://www.4shared.com/document/1bS6aio5/conf_VIS.html
Actually I am not sure about the rapid install patch version but I have download the EBS R12 from the following link and I think it contains the recent installer version
Link >> Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11250138
Note If you still can not open the link just suggest a suitable file hosting and I will upload to you. here I used 4shared and hoped it suits you.

Do I need to install x64 and x86 versions of SQL Server 2012 SP2?

Hi,
I have installed x64 version of SQL 2012 SP2. Do I need to install x86 version of SP2 as well?
(I have some x86 components installed as well that came with various things like SSDT-BI and/or Visual Studio installations.)
When I click "SQL Server Installation Center (64-bit).lnk" shortcut and run "Installed SQL Server features discovery report", it says "Microsoft SQL Server 2012 Setup Discovery Report".
When I click "SQL Server Installation Center.lnk" shortcut and run same, it says "Microsoft SQL Server 2012 Service Pack 1 Setup Discovery Report".
Both reports say the same thing: the installed version is 11.2.5058.0, which is SP2.

Hi,
I have installed x64 version of SQL 2012 SP2. Do I need to install x86 version of SP2 as well?
(I have some x86 components installed as well that came with various things like SSDT-BI and/or Visual Studio installations.)
When I click "SQL Server Installation Center (64-bit).lnk" shortcut and run "Installed SQL Server features discovery report", it says "Microsoft SQL Server 2012 Setup Discovery Report".
When I click "SQL Server Installation Center.lnk" shortcut and run same, it says "Microsoft SQL Server 2012 Service Pack 1 Setup Discovery Report".
Both reports say the same thing: the installed version is 11.2.5058.0, which is SP2.
Hello,
No you dont have to install X86 version
SQL server 2012 installable will install SQL server as per process architecture of your machine. If it is 32 bit machine it will install 32 bit version and for 64 bit it will install 64 bit version. installable has facility for both
Even on 64 bit machines some files, which always work in 32 bit compatibilyt mode, will be installed as well andand they go to SQL server (X86) folder. BIDS, SSIS always by default works in 32 bit compatibility mode.
If report says version as 11.2.5058 it means component is patched to SP2
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Snow Leo drivers for an HP LaserJet P1505n

Hey Printer forum,
I'm wondering if there are drivers in the works for HP P1505n LaserJet printers that work with Snow Leopard? I know the printer itself still functions fine, because my 10.5.x Mac mini works fine with it (also works in Windows Bootcamp), but my Snow Leopard iMac and MBP does not. I have the printer connected to an Airport Express, but the Snow Leopard Macs cannot locate a suitable driver, and the 10.5 driver does not work either.
If anyone has a working solution, that'd be great news.
Thanks!

baltwo wrote:
Search much? See http://discussions.apple.com/thread.jspa?threadID=2131363 and http://discussions.apple.com/thread.jspa?threadID=2145258 for starters.
Read much? The P1505 is not listed in either of those threads.

Error installing ECC6.0 and CRM 7.0 AS Java on windows server 2008

Hi gurus,
I have started an installation for AS java of NW 2004s on windows server 2008.
I an facing the following error
An error occurred while processing option SAP CRM 7.0 Support Release 1 > SAP Application Server Java > Oracle > Central System > Central System( Last error reported by the step :Cannot load library C:\Users\ADMINI~1\AppData\Local\Temp\5\sapinst_exe.2692.1245373317/iamodsdm.dll: Last error = 126.).
I am facing a similar issue for my AS Java installations for CRM7.0
Seems to be a windows related issue but not sure.
Can some please help me out. i'm in middle of an implementation and all stuck.
Pasted below is my sapinst.log from my ecc server.
INFO 2009-06-18 19:17:58.655
Creating file C:\Users\Administrator\AppData\Local\Temp\2\sapinst_exe.976.1245377870\dev_sap_kernel_test_18_Jun_2009_19_17_58.
INFO 2009-06-18 19:17:58.655
Removed file C:\Users\Administrator\AppData\Local\Temp\2\sapinst_exe.976.1245377870\dev_sap_kernel_test_18_Jun_2009_19_17_58.
INFO 2009-06-18 19:17:58.780
Creating file C:\Users\Administrator\AppData\Local\Temp\2\sapinst_exe.976.1245377870\dev_sap_kernel_test_18_Jun_2009_19_17_58.
INFO 2009-06-18 19:17:58.780
Removed file C:\Users\Administrator\AppData\Local\Temp\2\sapinst_exe.976.1245377870\dev_sap_kernel_test_18_Jun_2009_19_17_58.
INFO 2009-06-18 19:18:00.30
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-18 19:18:00.30
Removed file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-18 19:18:25.499
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\x.
INFO 2009-06-18 19:18:25.499
Removed file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\x.
INFO 2009-06-18 19:18:27.734
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-18 19:18:27.734
Removed file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-18 19:18:27.734
Removed file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\dev_sap_kernel.
INFO 2009-06-18 19:18:29.921
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/statistic.6.xml'.
INFO 2009-06-18 19:18:31.796
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/statistic.7.xml'.
WARNING 2009-06-18 19:18:46.171
Unable to get information about path
LABEL.ASC\ using GetVolumeInformation. Operating system error message: The specified path is invalid.
INFO 2009-06-18 19:18:48.812
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/inifile.3.xml'.
INFO 2009-06-18 19:18:49.202
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
INFO 2009-06-18 19:19:12.499
Working directory changed to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS.
INFO 2009-06-18 19:19:12.827
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/keydb.3.xml'.
INFO 2009-06-18 19:19:13.77
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/statistic.8.xml'.
INFO 2009-06-18 19:19:13.249
Execute step setSubstVars of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0
INFO 2009-06-18 19:19:13.968
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/callSdmViaSapinst.log' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/callSdmViaSapinst.8.log'.
INFO 2009-06-18 19:19:13.999
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\java.exe.log.
ERROR 2009-06-18 19:19:14.31
FSL-00009 System call failed. Error 3 (The system cannot find the path specified.
) in execution of system call 'CreateProcess' with parameter (NULL, <command line for executable C:\j2sdk1.4.2_17-x64\bin\java.exe, NULL, NULL, TRUE, 0x420, NULL, C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS, &StartupInfo, &ProcessInfo), line (569) in file (synxcchapp.cpp), stack trace: iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
ERROR 2009-06-18 19:19:14.109
MUT-03025 Caught ESyException in Modulecall: At line 569 file synxcchapp.cpp
Call stack:
iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
System call failed. Error 3 (The system cannot find the path specified.
) in execution of system call 'CreateProcess' with parameter (NULL, <command line for executable C:\j2sdk1.4.2_17-x64\bin\java.exe, NULL, NULL, TRUE, 0x420, NULL, C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS, &StartupInfo, &ProcessInfo), line (569) in file (synxcchapp.cpp), stack trace: iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
ERROR 2009-06-18 19:19:14.124
FCO-00011 The step setSubstVars with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|setSubstVars was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: At line 569 file synxcchapp.cpp
Call stack:
iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
System call failed. Error 3 (The system cannot find the path specified.
) in execution of system call 'CreateProcess' with parameter (NULL, <command line for executable C:\j2sdk1.4.2_17-x64\bin\java.exe, NULL, NULL, TRUE, 0x420, NULL, C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS, &StartupInfo, &ProcessInfo), line (569) in file (synxcchapp.cpp), stack trace: iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
WARNING 2009-06-18 19:19:14.171
Could not get property IDs of the JavaScript object.
ERROR 2009-06-18 19:19:14.171
FJS-00010 Could not get value for property .
INFO 2009-06-18 19:20:21.781
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|setSubstVars".
INFO 2009-06-18 19:20:21.796
Working directory changed to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS.
INFO 2009-06-18 19:20:23.718
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/callSdmViaSapinst.log' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/callSdmViaSapinst.9.log'.
INFO 2009-06-18 19:20:23.827
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\java.exe.log.
ERROR 2009-06-18 19:20:23.827
FSL-00009 System call failed. Error 3 (The system cannot find the path specified.
) in execution of system call 'CreateProcess' with parameter (NULL, <command line for executable C:\j2sdk1.4.2_17-x64\bin\java.exe, NULL, NULL, TRUE, 0x420, NULL, C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS, &StartupInfo, &ProcessInfo), line (569) in file (synxcchapp.cpp), stack trace: iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
ERROR 2009-06-18 19:20:23.827
MUT-03025 Caught ESyException in Modulecall: At line 569 file synxcchapp.cpp
Call stack:
iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
System call failed. Error 3 (The system cannot find the path specified.
) in execution of system call 'CreateProcess' with parameter (NULL, <command line for executable C:\j2sdk1.4.2_17-x64\bin\java.exe, NULL, NULL, TRUE, 0x420, NULL, C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS, &StartupInfo, &ProcessInfo), line (569) in file (synxcchapp.cpp), stack trace: iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()

ERROR 2009-06-18 19:20:23.952
FCO-00011 The step setSubstVars with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|setSubstVars was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: At line 569 file synxcchapp.cpp
Call stack:
iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
System call failed. Error 3 (The system cannot find the path specified.
) in execution of system call 'CreateProcess' with parameter (NULL, <command line for executable C:\j2sdk1.4.2_17-x64\bin\java.exe, NULL, NULL, TRUE, 0x420, NULL, C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS, &StartupInfo, &ProcessInfo), line (569) in file (synxcchapp.cpp), stack trace: iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
WARNING 2009-06-18 19:20:24.46
Could not get property IDs of the JavaScript object.
ERROR 2009-06-18 19:20:24.46
FJS-00010 Could not get value for property .
INFO 2009-06-18 19:27:00.640
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|setSubstVars".
INFO 2009-06-18 19:27:00.656
Working directory changed to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS.
INFO 2009-06-18 19:27:02.593
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/callSdmViaSapinst.log' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/callSdmViaSapinst.10.log'.
INFO 2009-06-18 19:27:02.640
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\java.exe.log.
INFO 2009-06-18 19:27:02.640
Output of C:\j2sdk1.4.2_17-x64\bin\java.exe -Xmx256M -Djava.ext.dirs=D:\usr\sap\ED1\JC00\SDM/program/lib;C:/j2sdk1.4.2_17-x64/jre/lib/ext -jar D:\usr\sap\ED1\JC00\SDM/program/bin/SDM.jar version logtoconsole=true sdmhome=D:\usr\sap\ED1\JC00\SDM/program "logfile=C:\Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/callSdmViaSapinst.log" is written to the logfile java.exe.log.
INFO 2009-06-18 19:27:03.921
Execution of the command "C:\j2sdk1.4.2_17-x64\bin\java.exe -Xmx256M -Djava.ext.dirs=D:\usr\sap\ED1\JC00\SDM/program/lib;C:/j2sdk1.4.2_17-x64/jre/lib/ext -jar D:\usr\sap\ED1\JC00\SDM/program/bin/SDM.jar version logtoconsole=true sdmhome=D:\usr\sap\ED1\JC00\SDM/program "logfile=C:\Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/callSdmViaSapinst.log"" finished with return code 0. Output:
Info:
Info: =============================================
Info: =   Starting to execute command 'version'   =
Info: =============================================
Info: MyPath is D:\usr\sap\ED1\JC00\SDM\program\bin\SDM.jar
MyPath is D:\usr\sap\ED1\JC00\SDM\program\bin\SDM.jar
Info:                          Name: tc/SL/SDM/SDM
                         Name: tc/SL/SDM/SDM
Info:                        Vendor: sap.com
                       Vendor: sap.com
Info:                      Location: SAP AG
                     Location: SAP AG
Info:                       Counter: 7.0014.20071029094708.0000
                      Counter: 7.0014.20071029094708.0000
Info:                   API Version: 13
                  API Version: 13
Info:                   GUI Version: 1.70
                  GUI Version: 1.70
Info:            Repository Version: 34
           Repository Version: 34
Info:            Web Server Version: 1.0
           Web Server Version: 1.0
Info:           Command API Version: 1.0
          Command API Version: 1.0
Successfully executed. Return code: 0
Info: Successfully executed. Return code: 0
INFO 2009-06-18 19:27:03.984
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/callSdmViaSapinst.log' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/callSdmViaSapinst.11.log'.
INFO 2009-06-18 19:27:04.31
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\java.exe.log.
INFO 2009-06-18 19:27:04.031
Output of C:\j2sdk1.4.2_17-x64\bin\java.exe -Xmx256M -jar D:\usr\sap\ED1\JC00\SDM/program/bin/SDM.jar getsubstvars substvarfile=PARAM_CONFIG_630.XML sdmhome=D:\usr\sap\ED1\JC00\SDM/program "logfile=C:\Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/callSdmViaSapinst.log" logtoconsole=true is written to the logfile java.exe.log.
INFO 2009-06-18 19:27:06.515
Execution of the command "C:\j2sdk1.4.2_17-x64\bin\java.exe -Xmx256M -jar D:\usr\sap\ED1\JC00\SDM/program/bin/SDM.jar getsubstvars substvarfile=PARAM_CONFIG_630.XML sdmhome=D:\usr\sap\ED1\JC00\SDM/program "logfile=C:\Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/callSdmViaSapinst.log" logtoconsole=true" finished with return code 0. Output:
Info:
Info: ==================================================
Info: =   Starting to execute command 'getsubstvars'   =
Info: ==================================================
Info: Starting SDM - Software Deployment Manager...
Starting SDM - Software Deployment Manager...
Info: tc/SL/SDM/SDM/sap.com/SAP AG/7.0014.20071029094708.0000
tc/SL/SDM/SDM/sap.com/SAP AG/7.0014.20071029094708.0000
Info: SDM operation mode successfully set to: Standalone
Initializing Network Manager (50017)
Info: Initializing Network Manager (50017)
Checking if another SDM is running on port 50018
Info: Checking if another SDM is running on port 50018
Info: Start to retrieve definitions of SubstVars.
Info: Writing substvarfile "PARAM_CONFIG_630.XML".
Info: SDM Repository contains 10 definitions of SubstVars.
Info: Definitions of SubstVars could be retrieved successfully.
Successfully executed. Return code: 0
Info: Successfully executed. Return code: 0
ERROR 2009-06-18 19:27:06.515
FRY-00001 Cannot load library C:\Users\ADMINI~1\AppData\Local\Temp\2\sapinst_exe.976.1245377870/iamodsdm.dll: Last error = 126.
ERROR 2009-06-18 19:27:06.515
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-06-18 19:27:06.640
FCO-00011 The step setSubstVars with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|setSubstVars was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.).
WARNING 2009-06-18 19:27:06.687
Could not get property IDs of the JavaScript object.
ERROR 2009-06-18 19:27:06.687
FJS-00010 Could not get value for property .
INFO 2009-06-18 19:43:25.859
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|setSubstVars".
INFO 2009-06-18 19:43:29.437
Working directory changed to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS.
INFO 2009-06-18 19:43:29.468
Creating file C:\Program Files\sapinst_instdir\.lastInstallationLocation.
INFO 2009-06-18 19:43:29.937
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\__instana_tmp.xml.

Installing terminal server role on windows server 2012 to use for Windows server 2008 R2 machines.

Dear
Our current setup is as follows :-
Active Driectory is in Windows Server 2003.
Citrix Xenapp version 5.6 with all Xenapp servers in Windows Server 2003
Now we are upgrading our Citrix farm to 6.5 and all Xen app servers into Windows Server 2008R2.
We did the configuration and testing; everything works fine except the terminal server is not configured which gives the pop always for the expiry date.
We do have license for 2012 terminal server which is not possible to downgrade for some reason and managent need to install new Windows Server 2012 for terminal server and activte the licenses.
My question is :-
1 Whether Windows Server 2008 R2 will get RDS cal license from Windows Server 2012 terminal server (RDS CAL license is of windows server 2012).
2. What is the role and features I need to activate in Server 2012 in order to use for Citrix 6.5 (only applicable fetaure for getting the RDS cal license.)
3. Whether I can add this 2012 server into domain. Is it possible to add 2012 server into Windows Server 2003 AD.
Your early reply is highly appreciated.

Thanks Jeremy..
I got exactly the right answers I am lookoing for ..
I successfully activated the terminal service on the newly created Windows 2012 Server and installed the retail license pack we had of 50+50+25 keys . It later shows the 125 keys successfully applied.
when I tried to link the Xenapp (Windows Server2008R2) to the license server, it first gives me error that session host service role is not installed on the ternial server. So I installed that role also in the terminal server.
But now its anothee error as below.
RDS Cals are not available for this Remote Desktop Session host server, and licensing Diagnostic has identified licensing problems for the RD session host server.
1. Is it wrong I did by installing session host server role into the terminal server (but really it gave me error like 'session host server role is not running on the license server' when I tried to link the license server).
2. Is it the problem that Windows Server 2008 R2 will not get license from 2012 RDS CAL license.
3. whether Clearing house will take time to update the license.
Your reply is highly appreciated. I need to know whether any other way I can link the Windows Server 2008 R2 Servers (Xenapp) to the license server.

How Create Dos boot able USB for Create Ghost for NTFS File and windows server 2008

Hi
How Create Dos boot able USB.
Which show all Partition Drive in dos mode for NTFS file system.
I have Windows Server 2008 which have NTFS File System of Hard disk.
I have not CD / DVD Rome and I cannot attach the CD / DVD because we have no permeation by our organization.
but i wanted to create Ghost.
So i need boot pc by other media USB.
Please help me.

Hi
I just assembled a cd which boots dos and can read and write to ntfs drives.
Should you be interested in the iso image file which you can use to write to cd or usb please email me at [email protected]
Thanks
Nuno

Problem installing Windows Server 2008 R2 Service Pack 1 Multilingual User Interface Language Packs

I downloaded Windows6.1-KB2483139-x64-en-US.exe but when I ran it on my Windows Server 2008 R2 SP1 (as Administrator) it does not run properly. I noticed it created a new cabinet file named "lp" briefly, then deleted it. Nothing else
appears on the screen.
My goal is to install Chinese display fonts on my server. Please help.

Hi,
First of all, if you want Chinese display language, you need to choose chinese in the drop down list on the download page. Here's a direct link in case you need it.
http://www.microsoft.com/en-us/download/details.aspx?id=2634(chinese simplified...)
Windows6.1-KB2483139-x64-zh-CN.exe is the file name for the Chinese simplified language pack.
1. The exefile extracts the file cabinet lp.cab which is the file you need to import the language pack.
2. Start lpksetup.exe and Point out the cab-file you just extracted.
If you want to do it with cmdline, you can do it with dism in an elevated command prompt as well:
Dism /online /Add-Package /PackagePath:C:\test\lp.cab
Note that you still need to create a policy or change default language in some way for your users.
Read more on the topic on:
http://technet.microsoft.com/en-us/library/dd744278(v=ws.10).aspx (adding)
http://social.technet.microsoft.com/Forums/windowsserver/en-US/7f019a90-8e48-4bc3-a9d2-e3c531354d04/how-to-use-group-policy-to-define-terminal-users-display-language-in-2008r2-terminal-servers (creating
gpo)
Microsoft Certified Trainer
MCSE: Desktop, Server, Private Cloud, Messaging
Blog: http://365lab.net

IE 9 downgrade to IE 8 Windows Server 2008 R2 x64

Hello.
I try to downgrade IE on my windows server 2008 machine. I start with this: http://support.microsoft.com/kb/957700#stepsforwin2008r2 , there is howto for IE 8,
but I using it for IE 9, propably there was my mistake...
After that command (dism /online /Disable-Feature /FeatureName:Internet-Explorer-Optional-amd64) I don't have IE 9 and try to install IE 8, but i got error:
After this step i realize, that somewhere must be some IE 9 components still be, i start search and find that on Control Panel\Programs\Programs and Features\Installed Updates
was IE 9 and I uninstall it. (After all operations I restarted machine)
Now I can't install IE 8 (it have same error what before), and don't get/can't install IE 9.
In folder C:\Program Files\Internet Explorer and C:\Program Files (x86)\Internet Explorer
I got files:
Is some way to get IE 8 or at least IE 9?
Thanks!
On this thread is some discusion about this: http://social.technet.microsoft.com/Forums/en/winserversetup/thread/68e0da1e-75b9-42e6-a832-d7bb6dc580c7

Enable IE 8 on Win2k8 R2:
Open the Command Prompt as administrator and run the following commands.
To Enable IE on Windows Server 2008 R2 version -- run the following command
dism /online /Enable-Feature /FeatureName:Internet-Explorer-Optional-amd64
To Disable IE on Windows Server 2008 R2 version -- run the following command
dism /online /Disable-Feature /FeatureName:Internet-Explorer-Optional-amd64
You need to restart the server after executing these commands.
To uninstall/disable IE check the following KB
This is what I ran at system32 prompt after uninstalling IE9 from programs\features
dism /online /Enable-Feature /FeatureName:Internet-Explorer-Optional-amd64
This does not work on my server, says Error:0x800f080c
Feature name Internet-Explorer-Optional-amd64 is unknown.
A Windows feature name was not recognized.

CF10 on Windows server 2008 (64bit): 32-bit CF cannot be installed, but 64-bit can.

Hi, I have exhaused my research and ways of fixing this issue.
I have a Windows Server 2008 (64-bit).
I am able to install 64-bit CF10 on it and CF websites run just fine.
On the same machine, I have a ASP website that must be in run in 32-bit and within this website there are some ColdFusion pages. So I have to install CF10 32 bit. So I uninstalled CF10 64bit.
When installing CF10 32 bit, I always got error message:
Cannot configure IIS connector. Enable the required option ASP.NET, ISAPI Extensions and ISAPI Filter in IIS under Windows Features and try again.
I did lot of online research and found RELATED posts, but none of them worked for me. Basically, in my case I have the IIS following installed
ISAPI Extensions
ISAPI Filter
ASP.NET
CGI
but I alway got the above error message. Cannot think of other reasons.
Any help is really appreciated!!! I have been working on this thing for the past three working days.
Regards.

Hi,
I saw your post which is similar to the problem I'm trying to solve. I'm not sure if I need to post a new topic, but I thought just add it to your post.
I installed CF10-64bit on Windows 2008 server (64 bit). When I opened the CF admin, it gave me an error - HTTP Error 500.0 - Internal Server Error. The page cannot be displayed because an internal server error has occurred. Module: IsapiModule, Handler: cfmHandler, Error Code: 0x800700c1. After searching for solution in the internet, I finally made it work after changing the DefaultAppPool which is used by the CFIDE in the advance settings, the "Enable 32-bit Applications" to False.
Now, my problem is I have an ASP application which requires that the application pool advance settings must be set to True for "Enable 32-bit Applications". I created another application pool for this application. It woks fine. However, this ASP application calls some CF pages and I'm having a problem because the CF10 is set to use a different application pool with diferent setting for "Enable 32-bit Applications".
In order for my application to work, it seems that I need to install the CF10 32 bit version. Am I right? Or is there a work around for my issue?
Thanks in advance for any help.
I'm going to create a new post for this.
Message was edited by: tibay

Unable to Install Windows Server 2012 on Windows Server 2008 R2 SP1 Hyper-V

My attempts to install are failing with a message "Windows cannot install required files. The file may be corrupt or missing....Error code: 0x800705070".
I am posting this on the Wondows 2012 Server forum but I have had exactly the same problem as described below with Windows 2008 R2 SP1.
As the title says this is on a Windows Server 2008 R2 SP1 host with all current updates. I have downloaded the ISO file from a Technet subscription file twice, once by direct download and once by the Akamai downloader. The virtual disk is connected with
the default IDE driver. I mounted both installation images as ISOs, located on a file system on the host server. I have tried installs by deleting the VM and recreating both the VM and a new virtual disk, re-using a previously created virtual disk, and
deleting the partitions in a previously created virtual disk, and executing the format command, and then attempting the install.
I have exactly the same problem trying to create a Windows Server 2008 R2 SP1 VM on the same host OS. With those attempts, I downloaded the Technet subscription iso 4 or 5 times, and burned one to a DVD which I attached to the created VM. Same
error message.
The virtual machines and virtual disks I created and used were all located on an RAID5 array, on a builtin Intel RAID controller using Intel Rapid Storage Technology software version 11.2.0.1066. The host Windows Server 2008 R2 SP1 uses this file system
but the OS is installed on a dedicated drive (C).
I had previously created a guest VM with Windows Server 2008 R2 (several months worth of updates ago) without drama.
I have spent hours reading forums and blog articles on this. A common response is to download the iso another time, and/or burn it to a DVD instead of mounting an iso image. Although I didn't do the later yet with 2012 Server, but I have done these
other steps attempting to install Windows 2008 Server SP1. The install process takes a while (not to mention doing multiple downloads). Given this seems to be a common recommended remedy, and indeed based on posts does seem to eliminate the problem is some
cases, why doesn't somebody change the Microsoft installer program so it does a thorough integrity check at the beginning of the install process?

Jeff,
After the exercise of Windows 2012 Server successfully installing (as I described above) I also successfully installed Windows 2008 R2 on Hyper-V. From my standpoint, I have eliminated the problem (which isn't the same as correcting the problem).
The answer to your specific question regarding Hyper-V support is that the motherboard I am using, an Asus P5Q, is not supported by Windows 2008 R2 because it doesn't use ECC memory, and the vendor doesn't say it supports Windows 2008. But I am sure you
know the motherboard vendors often don't test older motherboards with newer software versions. It appears that in specifying ECC memory Microsoft is trying to protect users of Windows Server from hurting themselves, not saying the software won't run.
Having said that, my suspicion in the beginning was, and still is, that it was some variable(s) left in an unknown state in the Hyper-V environment, which was why after trying to install Windows 2008 R2 several times I tried Windows 2012 which resulted in
the same error, and then encountered the same error trying to install Windows 7 on the same Hyper-V installation. The specific Hyper-V Windows 2008 R2 server had run without any operating problems for months before I started having trouble, and although it
had been quite a while since I had created VMs, that process used to work. The hardware didn't change. What changed was applying updates through Microsoft Update, and a few access control rights I changed, and at least I think, I set back to their original
value.
So in short, no, my hardware isn't supported by Windows 2008 Server. Two, your assertion that you are running the same software configuration that I am is very unlikely to be true. There are an extremely large number of things which are different between
your test system and mine, such as which Windows 2008 components are installed, what updates were installed and in what order they were installed, and what other third party software each of us is running, and between AD, and all the features, a large number
of potential differences in ACLs, options, etc. and I don't for a minute think this particular problem was caused by the underlying hardware.
I do appreciate your taking the time to try to help me, and I hope there is one thing you and I could agree on. Microsoft could pretty easily make it much easier to isolate problems. In this day and age reporting hex error codes (as opposed to doing the
table lookup in the error handling proc), and not providing more diagnostic information seems to me to be almost quaint. And in this case Microsoft can dismiss my problems on the grounds it was all on unsupported hardware. Unfortunately, I think they
are missing an opportunity to make their software better, because in my opinion what I encountered there are a set of conditions which will cause installations to fail that aren't going to get corrected.

Windows Server 2008 and Crystal Reports 8.5 printing issue

I am having a problem when using the crystal reports 8.5 report viewer ocx (ActiveX) under Windows Server 2008.
When logging onto the server through remote desktop, a report can be shown on screen in preview. When this report is printed, and the user requests more than one copy, the printer only ever prints one copy. Is this a configuration of the terminal server, or simply that the ocx control doesn't cater for it?
I am using the Windows Server 2008 "Terminal services Easy Print" drivers on the terminal server.
Any suggestions would be welcome.

Hi Sastry
I can print multiple pages from notepad without any issues. It is only the print from the crystal OCX control that has the issue. It has it's own print dialog box.
Thanks
Peter

Windows Server 2008 R2 evaluation for learning purposes.

Hi to all,
what is the less expensive (and fully legal) way to build a private lab with Windows Server 2008 R2 virtual machines to practicing me to take exams for MCSA certification ? I have already terminated the 180-days evaluation period for Windows Server 2008
R2.
Many thanks

I've downloaded and installed several different versions of Windows Server many times using the same account and information, if there were a problem with it, I'm sure Microsoft would have raised a concern with me. You can't really run a business by
tearing down and rebuilding your infrastructure every 6 months, and by installing, using, and learning from evaluation installations, I am just one more able-bodied individual with Windows skills to improve the supportability of their current and future install
base. My use of those eval products has no real commercial value to Microsoft because I wouldn't pay for it if I had to and I am not using them within a business infrastructure.
Nothing in the evaluation terms of use that I have seen says you can only install it one time, ever, in any environment, and nothing in the delivery and use of the evaluation versions has prevented me from reinstalling.
The bottom line I guess is you have to use your best judgement. I wouldn't recommend continuously reinstalling to support a real business infrastructure as a way to bypass licensing. I can't tell you 100% beyond a shadow of a doubt that Microsoft
fully approves of reinstalling an eval for your own personal development needs. I seriously doubt that Microsoft would spend the time and resources to chase you down for it, though.
And I agree with Milos - you would be better off pursuing a server 2012 certification, for which there are also evaluation versions available.
I hope this post has helped!

I have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

i have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

There is no need for anyone to use 32-bit version anymore.
Retail comes with both. Or you can save on just buying 64-bit System Builder disc.
Better support for today's hardware with larger video graphic memory and systems.
Better memory management.

After I installed 10.6.8, my HP Officejet lost the ability to print 2-sided. I installed the latest HP drivers for Snow Leopard, but the 2-sided option is turned off and greyed out.

After I installed 10.6.8, my HP Officejet 7310 lost the ability to print 2-sided. I installed the latest HP drivers for Snow Leopard, the 2-sided option shows up in the print window but is turned off and greyed out. Also the scan function won't let me scan at any density greater than 150 dpi. I have talked to Applecare and to HP tech support and been told "too bad." Any help would be appreciated.

THANK YOU! And who are you? I spent a couple of hours on the phone with Applecare and with HP Tech Support and they couldn't fix what you did in a few words. Many thanks! John

Installing x64 and x86 drivers for a HP Laserjet p1505n printer on Windows Server 2008

Similar Messages

Maybe you are looking for