Installing x64 Audigy 4 Pro Driv

Hi
Just wondering if anyones managed to install the Audigy 4 x64 drivers? I've got the beta 2 release of Vista but I just get the error that the install has timed out. Anyone got any help?

Thanks
Just got it working, for those who need help, run the installer, but dont touch it, instead, go to the temp folder and copy out the installers files to somewhere else. Then go to that folder and go to Support -> amd64 then run ctzapxx and chose "overwrite existing shared creative audio drivers" then click ok, worked for me )

Similar Messages

  • Audigy 4 Pro Driver Annoya

    Hi,
    I am currently experiencing issues with my Audigy 4 Pro drivers whilst trying to use SPDIF pass-through to my external decoder (and surround setup).
    I am running the latest beta drivers available through the website and until I installed these drivers, pass-through worked fine. Now however, my decoder is unable to recognise a digital signal from the soundcard.
    I am loathe to backpedal and install the old driver again because as well as a film enthusiast I am also a gamer and need the OpenAL support that the beta driver provides. In addition to that my PC used to suffer intolerably long shutdown periods using the original driver supplied on the CD.
    Can you tell me if this is a known issue, and if so will a stable release of the driver ever be made available? I find the issue extremely annoying as this was an expensi've bit of kit and I have previously owned both an Audigy and an Audigy 2 without having had any problems.
    Many thanks,
    Pete

    You obviously have not read my last post properly. If I go back to the old driver then I suffer horribly long Windows shut down periods again and also lose OpenAL support for games. It is definitely the Creative driver which causes this.
    Very dissapointed with creative on this one.Message Edited by pshuttle on -28-2005 05:29 PM

  • Audigy 4 Pro driver and MediaSource iss

    Just bought an Audigy 4 Pro card after getting seriously fed up with my old SBLi've 5. card, however I've got quite a few issues with it.
    I'm waiting on a response from Creative Support but figured I might check if anyone here can help.
    The bundled software with my card was the Audigy 2 ZS CD, and when I tried to install the drivers from that one it said it couldn't find an Audify 2 ZS card on my system and promptly quit.
    I tried a few ways to get around it but no luck, so eventually I downloaded the Audify 4 beta drivers (SBA4_BETADRV_US_2_05_0000.exe)from the Creative site.
    Those drivers installed and now my system show an Audigy 4 card installed with the following drivers: 5.2.3.00
    After installing the MediaSource from the Audigy 2 ZS CD I did not get any EAX control panel, Creative Mixer or Speaker setting though, so basically I'm stuck with nothing but my two front speakers making any sound at all.
    Creative MediaSource version: 2.02.06
    If anyone has a suggestion on how to solve this I'd be extremely grateful, because the current situation is quite annoying.

    The EAX Console, Speaker Settings and Mixer all came in the product CD. You must install them from the CD.

  • Wont Boot into windows XP after I install the Audigy 2 ZS driv

    I just built a new system - it is a Athlon 64 3500 on a Gigabyte Board with gig of corsair ram. The built in drivers for the on-board sound work fine but as soon as I put in my Audigy board I can only access is till I reboot - then the system hangs at the welcome screen and I lose my mouse. I tried moving it to another PCI slot and disabling the onboard sound and drivers all to no avail. I downloaded the latest driver but the problem persists. Anyone got any good Ideas? My onboard sound is less than stellar.
    PS - I am using an old ver of XP (will take a couple of days to download my service pack 2 on my snail connection.)
    Thanks in advance.

    I'm having almost the same problem except system hangs after resuming from standby (S3), however bootup and restart acts normally. Keyboard non responsi've to compter and mouse icon dissapears.
    move the card through most of my pci slots, reloaded xp, sp2, all system drivers etc.
    problem only occurs with Audigy2 ZS inserted in system.
    running following hardware:
    Asus k8v se Deluxe mobo
    GB corsair mem
    ATI X800 Pro 2m6 mb mem
    2 Seagate Sata dri'ves running in Performance mode (stripe not mirror, don't remember which is which)
    Audigy 2 ZS Platinum (Was running Gamer LE, which is same card, but decided i wanted i/o dri've)
    Logitech MX700 duo.
    I've done most of the logical things, and am really stuck. need standby and resume so that system maintenance tasks such as defrag, antivirus and so forth, can run in the wee hours of the morning w/out me being there, and puter shuts down when done to save on electric bill.
    Message Edited by seadragon009 on 0-09-2005 2:54 AM

  • Audigy 4 Pro ERROR pls h

    hi, i just got my audigy 4 pro today, from newegg.com and unintalled my audigy 2 completely... im a tech... well.. after that powered down, and installed the audigy 4 pro completely by the instructions, when i turned it on, i installed it just like the instructions, and software,., booommmm !!! sound... awesome, ok restart... restart.. sound boommm works.. ok now i wanted to adjust my audio... beep error... something about the software could not support the current card... ok so i moved my mouse to the top of the screen with that hotbar.. and clicked everything.. beep same message.. so the software that came with the soundblaster is not even working for my card... hmm im using winxp pro on an amd 64 3000+ with 2 g's ddr400mhz , with .2 terrabytes of hdd space, with a nvidia geforce 6800gt.. and a k8n-e deluxe asus motherboard... pls help.. im reinstalling my entire OS to get this thing to work...

    u know what.. i think that is what happened... but i redid the pc again, and very slowly reinstalled everything... grr but the sound blaster audigy 4 pro does work now... i did notice something very small that was annoying... sometimes when i empty the recycling ben.. it makes a static noise, midway thru the sound file... but other than that.. the card is awesome, and i don't have any feedback (high pitched noise, like noise) on my speakers.. but now i need new speakers.. so im going to best buy tomarrow to buy those THX speakers for like 200.00 are those better than the ones recommended on the back of the box..
    on box is
    Creative Inspire T7900
    Creative Inspire P5800
    best buy thx speakers
    THX certified speakers 5. 650 watts i think
    http://hardware.gamespot.com/Klipsch-ProMedia-5.-5025-O-6-26
    looked like these...
    please help.. and dont point me to creatives just for a purchase, pls point me to an honest opinion.. Point me to sound.. cuz im a sound freak thankz for helping again

  • Audigy 4 pro in Vi

    My client has an Audiyg 4 pro that they wish to install in their system using Vista Home premium. The audigy 4 pro was isntalled in a windows XP. . can anyone tell me if their is an isntallation CD for Audigy 4 pro ?available for Vista and how I may be able to get it's?2. will all the supporting software that is available for the Audigy 4 pro function?I would deeply appreciate from anyone for help so that I am able to install the Audigy 4 pro. This client of mine is a VIP. Thanks in advance for you help. VSAT

    I have not had that issue with an Audigy 4 with 32bit Vista. Don't expect to get many answers from Creative here though. I would use your onboard sound untill they get decent drivers out for Vista 64. Are u from Ohio Good luck, Diseaseboy

  • Audigy 4 pro/"non pro" driver confus

    do audigy 4 and audigy 4 pro drivers differ? the newest pro is only beta and a few months older than the "non pro". also, despite having bought a 4 pro, it never says so, neither in the system or when using autoupdate (installed products: Sound Blaster Audigy 4, DR release 2.5.0), auto update does not tell me to download the non pro driver though. I'd be glad if someone could tell me which driver to use

    white_rider wrote:
    do audigy 4 and audigy 4 pro drivers differ? the newest pro is only beta and a few months older than the "non pro". also, despite having bought a 4 pro, it never says so, neither in the system or when using autoupdate (installed products: Sound Blaster Audigy 4, DR release 2.5.0), auto update does not tell me to download the non pro driver though. I'd be glad if someone could tell me which driver to use
    You find the latest drivers (fits for X-FI & Audigy 2 & 4 serie) from station-drivers.
    These drivers are even WHQL (eg. passed MS quality test).
    .jtp

  • Audigy 4 Pro + new driv

    I just recently reinstalled Windows, and updated to the latest drivers after a week or so. during that week (and before the reinstall) the card worked flawlessly. Now, after a few minutes from boot, it begins to squeal. Where normal sounds would play, (clicks in my browser, games, movies) different pitch squeals play on top of the constant squealing. Music and Wav files, however, play fine--with the squealing still behind it.
    Creative Diagnostics comes up clean.
    Ive tried any solution Ive seen online here, reinstalling, etc.
    Oddities Ive noticed:
    The CTHELPER.exe and DLLML.exe processes seem to have crashed and resist being killed.
    CTHELPER was disabled from starting with Windows.
    System:
    Dual Opteron 240 workstation
    2 GB RAM
    Tyan K8WE motherboard
    Windows Server 2003 SP - Windows XP drivers should be fully compatible
    Audigy 4 PRO - only drivers installed/drivers & basic Creative utilities
    Any help would be appreciated.

    You meant ASIO, didn't you.
    ASIO driver becomes installed automatically when you install drivers for your card. You select the driver mode in Audition Audio preferences from a droplist. You should see least three Creative/SB ASIO drivers listed there ... one for 24/96 and two for 6/48 "resolutions". If you can't see these drivers listed there then just reinstall (the latest) drivers from Creative Support/Downloads.
    NOTE: Adobe added ASIO support in Audition from v. 2.0 so, if you have the v. .5 there ...
    jutapaMessage Edited by jutapa on 06-26-200709:9 AM

  • How to install win 8.1 pro x64 on MBA mid 2013 (core i7)

    Please help me how to install win 8.1 pro x64 on MBA mid 2013 (core i7).
    Thank you very much for your help.
    Best regards.

    Everything you need to help you is located here: http://www.apple.com/support/bootcamp/

  • Can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or other than purchasing an external drive??

    can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or any method other than purchasing an external drive??

    Note: These types of discs or activities are not supported by DVD or CD sharing:
    DVD movies.
    Audio CDs.
    Copy protected discs such as game discs.
    Install discs for an operating system such as Microsoft Windows (for use with Boot Camp), or Mac OS X.
    Burn a CD or DVD

  • My USB hub driver is not installing on my macbook pro windows 7 partition ?

    hey there, my USB hub driver is not installing on my macbook pro windows 7 partition .. any clue?

    yes am talking about windows 7 on my mac pro ... i did the following troubleshooting steps but no use and still the device is not recognized.
           - i changed the usb port .
           - i changed the hub it self .
         - i seaarched online for the driver automatically
            - i searched online for the driver manually ie. hardware id ..
             - i checked the connections,,
    anything else should i do ??

  • After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

    After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

    And me -- My Mac at work running Snow Leopard reads the drive normally. My home Mac (on Lion) can't even find it....
    Yet another Leo let-down.....

  • Fresh Install of Win XP Pro SATA Driver's don't work

    Hello
    I apologise first of all if this is posted in the wrong forum but as this is the motherboard I am using here goes: ( System configuration is in signature)
    I recently purchased a Seagate SATA HDD 160gb and fitted to the VIA 8237 chipset Sata_1 connection. Then the problems begin...
    SATA is enabled in the BIOS onchip (not the Promise controller)
    Press F6 during installation of Win XP Pro and install VIA 8237 SATA RAID driver - from USB external floppy drive - for Win XP and continue installation. After Formatting the hard drive the installation now asks for me to insert the diskette again and press enter 'Please insert the VIA Combo RAID Driver Diskette', and I do so and press enter...nothing happens!!! I have tried using the disk provided with the board and have also made a disk from the drives at the MSI website, both to no avail.
    I have also tried this process with the Promise controller i.e. attaching the drive to the Ser_3 connection and installing the drivers from the floppy during XP install and yet again I am requested to insert the floppy labelled Promise 579/518 Controller, and again when I do nothing happens.
    I would appreciate any help you could give as I now have no PC to use and want to get this sorted asap.
    Thanks

    I have always left the floppy in the drive from boot, only trying otherwise when it kept failing. However could it be to do with the fact this is an external Floppy drive connected by USB that it wont take it? I notice there is not any activity from the floppy drive, no matter whether I take the disk out and re-insert or just leave it there.

  • I have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

    i have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

    There is no need for anyone to use 32-bit version anymore.
    Retail comes with both. Or you can save on just buying 64-bit System Builder disc.
    Better support for today's hardware with larger video graphic memory and systems.
    Better memory management.

  • Can i install windows 7 via bootcamp (MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air. In bootcamp i allocate the partition then i click install and bootcamp will not see the disk.

    Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?

    I don't know first hand if you can use the Remote Disk option with Windows but as of 10.7.2 you can now use BCAssistant to make a bootable USB (thumb drive or external disk) W7 installer with the Boot Camp drivers installed also. Have you tried that yet?

Maybe you are looking for