Installing xp mode in windows 7

Hello, I have a new Touchsmart 610 with windows 7 - 64 bit and need to install xp mode to run some older programs.
I have followed the instructions on the Microsoft site to a point and have determined that "hardware-assisted virtualization" is not enabled on my system. When following their instructions to 'turn on hardware virtualization in my PC BIOS', some of the steps do not match up with my choices. Can you point me to some specific HP instructions for this?
Many Thanks.

There are patches available from Microsoft that remove the hardware virtualization requirement, you don't need anything from HP for it. You will find them in the XP Mode sections of the MS web site.
Keep in mind that XP Mode is for Win7 Professional and Ultimate, the Home and Home Premium versions do not support it.

Similar Messages

USB help in XP Mode in Windows 7 boot camp

I have been running Windows 7 in Boot Camp for quite some time. I need to run a program in windows XP and have installed XP mode in Windows 7. The USB dongle I need to use for the program is not being recognized. From what I gather USB 3.0 is not supported by windows XP. I am wondering if there is a workaround to be able to utilize the USB dongle in XP mode on a MacBook Pro late 2013 with two USB 3.0 ports. I tried uninstalling the USB 3.0 extension hub driver from Intel and this totally negated use of the USB ports.
Any assistance would be greatly appreciated.

Hi,
From what I have known, not all USB devices will work under XP Mode hubs.
Also, Windows 7 XP Mode is not capable of detecting or recognizing USB 3.0 ports on the host system. It is only capable of detecting and recognizing USB 2.0 ports.
Does the USB device can be detected in the host machine? On the host machine, go to Device Manager, check if USB Virtualization is installed, try to uninstall and re-install it for test.
Meanwhile, please refer the following article and check the result:
Scenario 2: Use a USB device in a virtual machine
http://technet.microsoft.com/en-us/library/dd744684%28v=WS.10%29.aspx
Regards,
Kelvin_Hsu
TechNet Community Support

Start Windows XP Mode in Windows 7 Minimized

Hi,
I have installed XP mode in windows 7 and changed to run minimized on the start up but it always starts in the normal mode.
Does anyone know how to run it on the start up minimized?

Hi,
Here is another thread that talk about same question with yours, please take it as reference:
http://social.technet.microsoft.com/Forums/windows/en-US/81d3aafc-216d-4036-bc66-48b53ff1a69d/can-i-have-virtual-pc-start-when-windows-starts-in-fullsceen-mode-but-minimised?forum=w7itprovirt
Roger Lu
TechNet Community Support

Install Captivate 4 on Windows 7 64-bit machine with Windows XP mode?

Hi,
I have been searching the web to find out the best way/place in which to load Captivate 4 on my Windows 7 64-bit machine. Seems some people have issues with recording, others don't. I have Windows XP mode on my machine.
My question is... what's the best way to load Captivate 4 on Windows 7 - should I install to Windows 7 and see how it goes. Or should I install under Windows XP mode?
Thank you!
Michele

Yea it works in XP mode
Daniel Wooden
Systems
U.S. District Court Middle District of Tennessee
615-736-7485
From: RodWard <[email protected]>
To: DEW45 <[email protected]>
Date: 09/24/2011 12:01 AM
Subject: Install Captivate 4 on Windows 7 64-bit
machine with Windows XP mode?
Re: Install Captivate 4 on Windows 7 64-bit machine with Windows XP mode?
created by RodWard in Adobe Captivate - View the full discussion
Try running Cp4 in WinXp compatibility mode on Win7. Also make sure
you're set to Run as Administrator.
I run Cp4 on Win7 without issues. But other users report similar problems
to yourself. In the end, it may or may not work for you because Adobe has
never claimed Cp4 was compatible with Vista or Win7 64bit.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3935593#3935593]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3935593#3935593]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Captivate by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

In XP Mode on Windows 7, after installing application as like I would normally on an actual XP system, application will not start in windows XP mode itself.

Just did a clean install of windows 7. I then downloaded windows XP mode and Windows Virtual Mode. Everything ran flawlessly and everything is updated. I needed to Install a program called Dentrix 10.5 which can only be installed on Windows
XP for numerous reasons and one including it needing to use Microsoft .NET 1.0. I installed this program on Windows XP Mode as I would as if I were installing it with a computer with windows XP. The Install of the program went fine and completed.
Still being in Windows XP Mode I wanted to see how it would run. I hit Start Menu, All Programs, Startup Programs, and clicked on the Dentrix Application. Once I clicked it the time glass on the mouse was there for a few seconds and
then went away without the application starting up at all. One thing that I'm thinking is why after I clicked Start Menu, All programs, is why was Dentrix not in its own folder and instead in the Startup programs after All programs? Any Ideas how
to get the program to run? Like I said, I am trying to run the program in Windows XP Mode and not Windows 7 as I have found many Q's and A's on only how to do that. Also this is the second application which I downloaded and the first being Microsoft
Security Essentials so I know I don't have some virus from keeping from opening the Dentrix Application. Incase you are wondering the Microsoft Security Essentials opens and runs fine in Windows XP Mode. So Pretty Much My Main question is: Why
my application not starting up in Windows XP Mode? Any help is greatly appreciated!

Once I clicked it the time glass on the mouse was there for a few seconds and then went away without the application starting up at all.
A couple times a week I open Dentrix 11.0 in a virtual machine on Windows 7. I experience the same thing almost every time I open the VM. I must first get Windows to "reconnect" my network for me. Do this by opening Start | My Computer, and
double-click on the mapped network drive leading to the Dentrix data. After I can see the Dentrix data drive, Dentrix will be able to read it too and will open correctly.
In Dentrix, seeing nothing (or briefly seeing a hourglass and then seeing nothing) is a classic sign that either:
- The database files are marked as Read Only
- The program cannot access the data files (probably the folder it is pointed to does not contain any data).
- Or possibly the database path does not point to the right location where the data files are located
Open the folder where you installed the program files of Dentrix (probably c:\program files\dentrix\) and double-click to run EP.EXE. The database path will be revealed. You can "Browse" to the correct location, and "OK" through the dialog to
close them. Then try opening Dentrix again.
Should that not work, open Start | My Computer, and try to open the path (starting with the drive letter, then the folder structure you saw in EP.EXE).
By the way, if your path uses UNC (starting with two back-slashes and then the computer name of the server), you'll need to map a network drive and replace your path with a mapped drive path. (Map a drive in Start | My Computer | Tools | Map Network
Drive). Dentrix really doesn't like UNC paths.
Dentrix 10.5 can only be installed on Windows XP
Microsoft .NET 1.0
Just FYI, Microsoft .Net Framework 1.0 is required only for the "Time Clock" feature of Dentrix. Windows 7 already has .NET Framework features up to version 3.5 built in, and Time Clock (in my experience) works great under Windows 7 without installing
.NET 1.0.
Have you tried installing directly in Windows 7? I have a specific reason why I don't (I have a newer version of Dentrix installed on my Win 7 machine, and use the VM to go back to an older database occasionally - so I can't mix two different program versions
on the same machine). If you were to try installing this program under Windows 7 directly, Dentrix will launch the Microsoft .NET Framework install after the Dentrix install is completed. Just cancel out at that point (Windows will probably give you an "incompatibility"
error message anyway before allowing the install to go through) and I believe you can run it under Windows 7. That might eliminate the networking-through-the-VM issue. So, if you have no other reason not to install Dentrix on your Windows 7 machine directly,
I'd try it. You might be surprised and if it works, you'd save yourself some headache with connecting the to network through the virual machine.
Is why was Dentrix not in its own folder and instead in the Startup programs after All programs?
During the installation, on the Select Program Folder screen, you must have clicked the "Startup" option under Existing Folders. By default, "Dentrix" will be typed into the box at the top. If you simply clicked Next, it would have gone
to the correct location. The screen is a little confusing, because something in the list will be highlighted by default, but what is typed into the box at the top will actually be used.

Install Oracle8 client in silent mode under windows environment

I would like to know how can i install Oracle8 client in silent mode under windows
environment.
I would appreciate a prompt reply on this

I would like to know how can i install Oracle8 client in silent mode under windows
environment.
I would appreciate a prompt reply on this

Installing Acrobet diabled the Integration Features of the Virtual XP-Mode in Windows 7 Professional

Installing Acrobet diabled the Integration Features of the Virtual XP-Mode in Windows 7 Professional, 64 Bit. Does anyone know of a work around so the integration features can remain enabled in the Virtual XP-Mode? I now have Acrobat installed in the Virtual XP Mode and the Integration Features are enabled and working as intended. However, it is cumbersome to work in the XP Mode and then transfer the work to the reular mode.

There are patches available from Microsoft that remove the hardware virtualization requirement, you don't need anything from HP for it. You will find them in the XP Mode sections of the MS web site.
Keep in mind that XP Mode is for Win7 Professional and Ultimate, the Home and Home Premium versions do not support it.

NO Lenovo Windows 8.1 Recovery DVD for CLEAN INSTALL! + unable to Install UEFI MODE

Hi,
I Just bought 25 Thinkpad T431s Laptops for my company (@ISRAEL)
All of them came with windows 7SP1 Installed And Recovery is Windows 8 (not 8.1 even though 8.1 is out for a yr!)
The Install process takes 3 Hours!!! Just for upgrading to windows 8.
Then I need to upgrade to 8.1 - the process is about 3 hours more! Because I need to Register And create Microsoft account for each user then to verify the account.
After that I need to Log with the account to the PC And then Download the update (3.5GB) And Install it.
IS ANYONE AT LENOVO THINKS THAT ITS ACCEPTABLE?
DO I WORK FOR LENOVO? DO I NEED TO SPEND 6 HOURS FOR UPGRADING EACH LAPTOP?
Don't forget that after that I need to uninstall all the bloater from the PC. Like Symantec AV (Because Enterprise company's uses Enterprise Class AV, FW And other software. We uses Kaspersky Enterprise, ESET, And others...)
AND ABOVE ALL.
If I want to Install Original Windows 8.1 I can't!
Because the OS Recovery DVD is not bootable And contain special recovery files with special extensions. Also, there is no PRODUCT CODE! Just "WINDOWS 8" sticker logo on the back of the notebook.
SO I WANT TO KNOW WHERE AND HOW(!)
I CAN GET A WINDOWS 8.1 ORIGINAL ISO IN ORDER TO INSTALL IT ON ALL MY PC's.
I want to know why I can't Install Just the "OPERATING SYSTEM RECOVERY DISK" (A standard clean Install)
== When I tried with my own Windows 8.1 Pro VL \ RETAIL ISO to Install it didn't pass activation==
==================== not even with the extracted key from the bios=====================
FYI - WHEN I BUY DELL OR HP LAPTOPS I'M GETTING A WINDOWS 8.1 PRO X64 BOOTABLE DVD DISK in addition to the 2 DVD RECOVERY DISKS. (So I am able to Install windows Without all the that you And them put into the recovery disk set).
Customer service in ISRAEL said that this is not possible! And that the only way is:
1. Use the 3 DVD recovery disks to format And Install windows 8.0
2. Register the user with a Microsoft account
3. Log in to each PC with his own Microsoft account
4. Download 8.1 update from Microsoft store
3. Install the 3.5GB update.
4. uninstall all the bloater.
So can I please ask you to confirm the answer I got from LENOVO ISRAEL. If So, ill return the laptops And that will the last time ANY OF MY COMPANY'S WILL EVER BUY ANY NOTEBOOKS OR TABLETS FROM LENOVO!
In addition, im trying to figure out how can I contact Lenovo main office to file a complaint against Lenovo Israel.
CEO Ms. Sigal didn't do anything to try And solve the issue, the product manager Mr. Many talk with me on the phone And was very rood. At the end he hang up the phone in my face! After I proved him wrong in another issue (T440s T431s cannot be installed with UEFI Because External DVD drive does not support UEFI Install only Legacy. And there is a big different between Legacy And UEFI)
Thank you.
Moderator note; profanity / implied profanity edited. Forum Rules

Hi ohad, welcome to the forums,
I'm sorry to read about your experience.
I don't work for Lenovo but it would appear to me that something may have gone wrong at the sales / purchasing stage; to my knowledge the T431s is only available with Windows 7 preload, (with Win 8 recovery discs in some cases as you have), or with Windows 8 preload. A Win 8.1 preload doesn't appear to be available for the system, but I stand to be corrected on this. If you required Windows 8.1, in my opinion the better option of the two, would have been a system with the Win 8 preinstall as this would only require updating to Win 8.1
Unfortunately I also can't envisage Lenovo creating a factory image for the T431s because it must be pretty near end of life.
You might find the following to be of interest;
http://forums.lenovo.com/t5/Windows-8-and-8-1-Knowledge-Base/Why-can-t-I-boot-from-a-USB-key-on-UEFI...
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Installing Photoshop Elements in Windows 8

I am tring to install Photoshop Elements in windows 8 & I get the message I need
Internet Explorer 7 when I have Internet 10. How can I install my element program?

use compatibility mode to install problematic older versions of software (adobe and non-adobe): http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/installing-older-photos hop-elements/fd297cf9-f1c6-48d2-aa81-c339dc798e47?msgId=29934f75-800f-4344-8852-c87af58293 56

Forms 10g installed and running on Windows Vista

Update 12-Dec-2008: Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
Update 07-July-2008: Added text at the bottom showing how to find patchsets for Forms 10g.
Update 29-May-2008: This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted as blue text.

Original message begins here:
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. (Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista) So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
Update 29-Jan-2008: Unfortunately, it turns out that the Forms 10g Builder running on Vista had a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
Update 12-Mar-2008: Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
Update 25-July-2008: Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. [ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
 attempting to verify your virtual memory settings.
 Please verify that the sum of the initial sizes of
 the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
 they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
 #: --Alt+Home works, but leaves the Action (first
 #: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"Finding Forms 10g Patchsets
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

Lightroom6 instalation rejects installation on Windows 7 with remark that windows vista is not supported

I tried to install Lightroom 6 on my Windows 7 System
The installer jejects the Installation with the remark that Windows Vista is not supported by this product
Is that Problem known? Is any solution available?

Hi Michael,
You can follow the article: How to troubleshoot issues that may prevent a program from being installed correctly on a Windows Vista-based computer and check whether the installer is running in Compatible Mode or not.
If the check box for Compatibility Mode is checked and simply UnCheck it and click Apply.
Run the installer and again and check if it still gives you any error message.
Let us know if it works or not.
Thanks,
Ratandeep Arora

Unable to Install Photoshop CS5 on Windows 8

I'm unable to install Photoshop CS5 on Windows 8. A copy of the installation log is listed below. The first time I tried installing, I had Norton 360 enabled, right-clicked the DVD-ROM drive and selected to execute the installer. It failed at about 5%. Then, I uninstalled Photoshop CS5 and uninstalled Adobe AIR, disabled Norton 360, ran the Creative Suite Cleanup Tool, and then rebooted back into Safe Mode. This time, I browsed the DVD-ROM drive, right-clicked on the set-up.exe file and selected Run As Administrator. Same thing as before. It failed at 5%. Does anyone have any suggestions? Thanks.
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 60 error(s), 56 warning(s)
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: The following payload errors were found during install:
ERROR: - Adobe CSXS Infrastructure CS5: Install failed
ERROR: - Microsoft_VC90_ATL_x86: Install failed
ERROR: - Adobe Media Player: Install failed
ERROR: - Adobe Linguistics CS5 x64: Install failed
ERROR: - Microsoft_VC90_CRT_x86: Install failed
ERROR: - Adobe Photoshop CS5 Support: Install failed
ERROR: - Adobe Bridge CS5: Install failed
ERROR: - Microsoft_VC80_ATL_x86: Install failed
ERROR: - Recommended Common Fonts Installation x64: Install failed
ERROR: - AdobePDFL x64 CS5: Install failed
ERROR: - DeviceCentral_DeviceCentral3LP-en_US: Install failed
ERROR: - Microsoft_VC80_MFCLOC_x86_x64: Install failed
ERROR: - Adobe XMP Panels CS5: Install failed
ERROR: - Photoshop Camera Raw: Install failed
ERROR: - AdobeColorCommonSetCMYK: Install failed
ERROR: - Adobe Mini Bridge CS5: Install failed
ERROR: - Microsoft_VC80_CRT_x86_x64: Install failed
ERROR: - Adobe Photoshop CS5 English Language Pack_x64_AdobePhotoshop12-en_US_x64: Install failed
ERROR: - AdobeColorJA CS5: Install failed
ERROR: - Adobe ReviewPanel CS5: Install failed
ERROR: - Photoshop Camera Raw (64 bit): Install failed
ERROR: - Microsoft_VC90_MFC_x86: Install failed
ERROR: - Adobe Photoshop CS5 Core_x64: Failed due to Language Pack installation failure
ERROR: - Adobe Photoshop CS5 English Language Pack_AdobePhotoshop12-en_US: Install failed
ERROR: - Suite Shared Configuration CS5: Install failed
ERROR: - Adobe Linguistics CS5: Install failed
ERROR: - PDF Settings CS5: Install failed
ERROR: - DeviceCentral: Failed due to Language Pack installation failure
ERROR: - AdobeColorEU CS5: Install failed
ERROR: - AdobeTypeSupport CS5: Install failed
ERROR: - AdobeColorVideoProfilesCS CS5: Install failed
ERROR: - AdobeColorCommonSetRGB: Install failed
ERROR: - Adobe Player for Embedding x64: Install failed
ERROR: - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
ERROR: - Required Common Fonts Installation x64: Install failed
ERROR: - Microsoft_VC90_ATL_x86_x64: Install failed
ERROR: - Adobe CSXS Extensions CS5: Install failed
ERROR: - Microsoft_VC80_ATL_x86_x64: Install failed
ERROR: - AdobeOutputModule: Install failed
ERROR: - Microsoft_VC90_CRT_x86_x64: Install failed
ERROR: - Microsoft_VC80_CRT_x86: Install failed
ERROR: - AdobeCMaps x64 CS5: Install failed
ERROR: - AdobeTypeSupport x64 CS5: Install failed
ERROR: - Microsoft_VC90_MFC_x86_x64: Install failed
ERROR: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: - Adobe WinSoft Linguistics Plugin CS5 x64: Install failed
ERROR: - AdobePDFL CS5: Install failed
ERROR: - AdobeCMaps CS5: Install failed
ERROR: - Microsoft_VC80_MFC_x86_x64: Install failed
ERROR: - Required Common Fonts Installation: Install failed
ERROR: - Adobe SwitchBoard 2.0: Install failed
ERROR: - Microsoft_VC80_MFC_x86: Install failed
ERROR: - AdobeColorNA CS5: Install failed
ERROR: - AdobeColorPhotoshop CS5: Install failed
ERROR: - Microsoft_VC80_MFCLOC_x86: Install failed
ERROR: - Recommended Common Fonts Installation: Install failed
ERROR: - Adobe Extension Manager CS5: Install failed
ERROR: - Adobe ExtendScript Toolkit CS5: Install failed
ERROR: - Adobe AIR: Install failed

Try http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

How to install developer suite on windows vista

trying to install the dveloper suite on windows vista, keep gettting error that the pagefile(swap file) size is 0 and need to fix this problem.
did any one have this problem
using developer suite x86-101202 (compatibility mode xp sp2)

Have you followed the steps under "III. After the install completed" in this thread?
Forms 10g installed and running on Windows Vista
And note the fourth paragraph from the top. There is a BIG bug in Forms Builder 10g running on Vista. When you try to compile a program unit (procedure) that calls another one that has compiler errors, the Forms Builder crashes. So it can be pretty frustrating if you actually try do any forms development work.

Problem Installing Developer Suite on WIndows Vista

Hi! i'm a student of computer science, and i need to install developer suite for a proyect i need to do for one of my classes.
I have a problem installing developer suit on Windows Vista. After i download and unzip both disk, i run the setup from the installer folder and i get an alert that says: "abnormal termination. There's been an internal error. Send the following files to the Oracle Suport Services: Unknown, Unknow, Unknow". I've also tryed with the setup from the main folder and i get the same alert. I don't know what to do, i've tryed setting the compatibility mode to windows XP, runnig as administrator, changing the performance configuration of my computer and nothing. Please help me to install the program!

Which developer suite are you using???

Audigy 4 gives blue screen during install of drivers on Windows XP SP3

FAudigy 4 gives blue screen during install of drivers on Windows XP SP3! Specs
Asus a8n-sli
GB RAM
6600 GT
Audigy 4
LC Power 550 W PSU
I put in the installation CD that comes with the card. I want to install everything (full install), and mid-install I get a blue screen.
I then uninstalled everything and tried only to install the updated drivers from the website in safe-mode and still a blue screen. Should I get the dump file and send it to Creative?
How do get this card to work like it should? I also have a remote control that came together with the card.
Im currently using the onboard AC97 Realtek ALC850 soundcard.
Whats the whole procedure to make this work? Detailed please. How do I eliminate all traces of the audigy on my PC?

Re: Audigy 4 gives blue screen during install of drivers on Windows XP SP38 Perhaps you'd want to read this old thread of mine about my misadventures with the same exact card you are trying to use. IMHO that card was not worth the time and money I spent on it (even even less the time and money it caused me to spend afterwards to repair the damage it caused.
Message Edited by CreativeSkeptic on 2-23-2008 0:4 PMMessage Edited by CreativeSkeptic on 2-23-2008 0:4 PM

Installing xp mode in windows 7

Similar Messages

Maybe you are looking for