Installing Zenworks 7 desktop management on Windows 2008

Hello,
I tried to install Zenworks 7 sp1 Desktop Management on a Windows 2008 server running Edirectory 8.8 sp5, but I got an error message saying that the OS is not suppported.
Is there anyway to install this on a Windows 2008 server ?
I accidently posted this thread under "Imaging" as well.

Ye,
same answer as in the imaging forum - you need ZCM 10
Shaun Pond

Similar Messages

  • Zenworks 7 Desktop Management on Windows Server 2008

    Hello,
    I tried to install Zenworks 7 sp1 Desktop Management on a Windows 2008 server running Edirectory 8.8 sp5, but I got an error message saying that the OS is not suppported.
    Is there anyway to install this on a Windows 2008 server ?

    Ye,
    you need ZCM 10 for W2K8
    Shaun Pond

  • Installing CF8.0.1 64 on Windows 2008 Serv

    Does anyone have a set of instructions on installing CF8.0.1
    64bit on Windows 2008 Server. I have tried on and off for the last
    two weeks and have made no progress. The install goes great,
    however the CF administrator component of the install fails with a
    HTTP Error 500.0 - Internal Server Error. IIS7 worked fine prior to
    coldfusion installation, however once CF 8.0.1 gets installed IIS7
    appears to break. I've read the other thread in the forum and the
    suggestions made there don't help or have already been done.
    Module IsapiModule
    Notification ExecuteRequestHandler
    Handler AboMapperCustom-72626
    Error Code 0x800700c1
    Most likely causes:
    - IIS received the request; however, an internal error
    occurred during the processing of the request. The root cause of
    this error depends on which module handles the request and what was
    happening in the worker process when this error occurred.
    - IIS was not able to access the web.config file for the Web
    site or application. This can occur if the NTFS permissions are set
    incorrectly.
    -IIS was not able to process configuration for the Web site
    or application.
    -The authenticated user does not have permission to use this
    DLL.
    -The request is mapped to a managed handler but the .NET
    Extensibility Feature is not installed.
    Things to try (from the error summary page)
    - Ensure that the NTFS permissions for the web.config file
    are correct and allow access to the Web server's machine account.
    - Check the event logs to see if any additional information
    was logged.
    - Verify the permissions for the DLL.
    - Install the .NET Extensibility feature if the request is
    mapped to a managed handler.
    - Create a tracing rule to track failed requests for this
    HTTP status code.
    Adobe in going to expect a $6700 check from me in another
    week or so and the damn thing doesn't install to the point where
    the demo's will run. Windows 2008 and IIS7 isn't that new and I
    can't imagine that the number of people having done this is limited
    to the one or two in this forum and that there is no technote avail
    to us that have to depend on internet support and published
    technotes that can document the installation procedure of CF 8.0.1
    64bit on windows 2008.
    It's the fourth of July and this is a fine place to be.
    Happy 4th everyone!

    Please see this link:
    http://www.jasonholden.com/blog/index.cfm/2008/5/6/Coldfusion-8-on-Windows-Server-2008

  • I am having a problem installing the x86 drivers on a Windows 2008 server for a hp 4000n.

    I am having a problem installing the x86 drivers on a Windows 2008 server for a hp laserjet 4000n.

    Hi all,
    Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
    I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
    When I compile using "javac" I get an error saying "javac" is not recognised.
    When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
    Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
    I have removed all previous references to java in the registry editor.
    Please help !
    Regards,
    Vipul

  • How to install a plugin on 64 bits windows 2008 server?

    From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)

    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

  • Can install Oracle 10g release 2 on Windows 2008 R2 Server  64-bit machine

    Hi All,
    Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.
    Regards,
    Rizi

    Hi;
    Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.Yes you can but you must use 10.2.0.5.0 version. Pelase check below note:
    How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2 [ID 1173433.1]
    Regard
    Helios

  • Error Installing AD Password sync connector in windows 2008

    HI,
    i am trying to install AD Password sync connector in windows 2008 but i am getting following error.
    **Error occurred while uploading prepAD.ldif. , please refer to %TEMP%\oimpwdsync.log. Please upload**
    **prepAD.ldif to Active Directory Domain Controller before applying ACLs.**
    Thanks,

    Dont do any thing. just restart your machine,a dn re-configure, because first time passwordsync10.dll has not initialized on AD machine. after that just put same parameter value what you have given previously. it will work
    same time verify if AD Authentication or xelsysadm Authentication is wrong

  • How to install Oracle imaging & process management in windows xp prof

    Hi All
    I am trying to install oracle Imaging & Process management in windows XP. Please let me know whether it is possible in windows XP or not... which I couldn't able to install in XP. when I saw the Install doc, it mentioned it is possible in windows server 2003. Installation guide mentioned that we have to setup 6 or 7 different server setups.
    or
    If any one have I/PM installation steps for windows server 2003 Please provide the steps.
    Any input would be greatly appreciable.
    regards
    Vijay

    Vijay,
    IPM is not certified to be installed on Windows XP (as for IPM services).
    It is possible to install IPM on one server machine (or two, if you need Web). First, you have to decide, which services you have to install.
    regards
    Jakub

  • Install ODI 10g on  64 bit Windows 2008 server

    Can we install ODI 10g on 64 bit Windows 2008 server ? if so Please provide the me the link for download
    Edited by: user1137989 on Oct 27, 2010 10:51 PM

    If you are looking for 10g then scroll down in the link (http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html) Oracle Data Integrator 10g (10.1.3.5.0) and select for Microsoft Windows (x86) and extract and install .
    11g comes in 32 and 64 bit version .
    32 bit version is
    Oracle Data Integrator 11g (11.1.1.3.0)
    for Microsoft Windows (x86)
    64 bit version is .
    Oracle Data Integrator Companion 11g (11.1.1.3.0)
    for All Platforms
    Hope this helps .

  • Install ID CS4 Desktop version in Windows Server 2003

    Is it possible to install Indesign CS4 Desktop Version on Windows Server 2003.
    When i tried to install it was showing Warning with the message
         System requirements not met.
    Regards,
    Suresh

    It can be installed.

  • Zenworks Desktop Management for Windows 7

    Hello,
    We are trying to figure out what is the solution for Windows 7. We are currently in a Novell environment (I believe Zenworks 7). Being unfamiliar with the Zenworks Desktop Management - can someone please explain the following to me:
    We are trying to find the application launcher answer to deploying on Windows 7. Whenever I run the ZfDAgent.msi (7 agent/Zenworks Desktop Management) on a Windows 7 (Enterprise) machine, it says the following:
    "The Remote Management Mirror Driver can only be installed on Windows 2000and Windows XP machines". Is there a new version of the Zenworks Desktop management software available/coming out for Windows 7?
    Any help is greatly appreciated!

    Originally Posted by ketter
    On Mon, 17 May 2010 20:36:02 GMT, Yappy70
    <[email protected]> wrote:
    >
    >Hello,
    >
    >We are trying to figure out what is the solution for Windows 7. We are
    >currently in a Novell environment (I believe Zenworks 7). Being
    >unfamiliar with the Zenworks Desktop Management - can someone please
    >explain the following to me:
    >
    >We are trying to find the application launcher answer to deploying on
    >Windows 7. Whenever I run the ZfDAgent.msi (7 agent/Zenworks Desktop
    >Management) on a Windows 7 (Enterprise) machine, it says the following:
    >
    >"The Remote Management Mirror Driver can only be installed on Windows
    >2000and Windows XP machines". Is there a new version of the Zenworks
    >Desktop management software available/coming out for Windows 7?
    >
    >Any help is greatly appreciated!
    Windows 7 is not supported on Zenworks for Desktops 7. You will need
    to upgrade to Zeworks Configuration Management 10. I'm in the middle
    of doing this myself right now.
    Regards,
    Ken
    Thanks for the quick reply -- by chance have you ran across any white papers, webcasts, or documentation as to the desktop application features included with Zenworks Configuration Management 10? Such as how the application explorer/window are handled with this new version? I tried doing a search to no avail.
    Thanks for any suggestions!

  • Unable to install Blackberry Desktop Manager on Windows 8

    Hi Team,
    Please help as I am trying to install Blackberry Desktop Software for my Blackberry Bold 4 (9900) phone,
    I did not get any software CD with the phone hence downloaded the software from 
    http://us.blackberry.com/software/desktop.html
    and when I try to install I get the following error,
    I do not understand this issue can any one help me on this.
    Windows ® Installer. V 5.0.9200.16384
    msiexec /Option <Required Parameter> [Optional Parameter]
    Install Options
    </package | /i> <Product.msi>
    Installs or configures a product
    /a <Product.msi>
    Administrative install - Installs a product on the network
    /j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
    Advertises a product - m to all users, u to current user
    </uninstall | /x> <Product.msi | ProductCode>
    Uninstalls the product
    Display Options
    /quiet
    Quiet mode, no user interaction
    /passive
    Unattended mode - progress bar only
    /q[n|b|r|f]
    Sets user interface level
    n - No UI
    b - Basic UI
    r - Reduced UI
    f - Full UI (default)
    /help
    Help information
    Restart Options
    /norestart
    Do not restart after the installation is complete
    /promptrestart
    Prompts the user for restart if necessary
    /forcerestart
    Always restart the computer after installation
    Logging Options
    /l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
    i - Status messages
    w - Nonfatal warnings
    e - All error messages
    a - Start up of actions
    r - Action-specific records
    u - User requests
    c - Initial UI parameters
    m - Out-of-memory or fatal exit information
    o - Out-of-disk-space messages
    p - Terminal properties
    v - Verbose output
    x - Extra debugging information
    + - Append to existing log file
    ! - Flush each line to the log
    * - Log all information, except for v and x options
    /log <LogFile>
    Equivalent of /l* <LogFile>
    Update Options
    /update <Update1.msp>[;Update2.msp]
    Applies update(s)
    /uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
    Remove update(s) for a product
    Repair Options
    /f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
    Repairs a product
    p - only if file is missing
    o - if file is missing or an older version is installed (default)
    e - if file is missing or an equal or older version is installed
    d - if file is missing or a different version is installed
    c - if file is missing or checksum does not match the calculated value
    a - forces all files to be reinstalled
    u - all required user-specific registry entries (default)
    m - all required computer-specific registry entries (default)
    s - all existing shortcuts (default)
    v - runs from source and recaches local package
    Setting Public Properties
    [PROPERTY=PropertyValue]
    Consult the Windows ® Installer SDK for additional documentation on the
    command line syntax.
    Copyright © Microsoft Corporation. All rights reserved.
    Portions of this software are based in part on the work of the Independent JPEG Group.

    Hi and Welcome to the Community!
    Here is a KB that discusses that error:
    KB19300 Windows Installer command line parameters information box appears when attempting to install BlackBerry Desktop Manager
    Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Cannot install desktop manager on windows 7 64bit

    hi,
    unfortunately i am not able to installa the Desktop Manager 6.1.0 B38 Multilanguage on a pc having windows 7 - 64 bits, i already installed it on another pc with windows 7 - 32 bit and it worked.
    please tell me how to solve this problem.
    regards
    Salvatore

    complete uninstall first, restrat your PC/LAPTOP, run setup again with "Run As Administrator"
    if not work download this JAVA "jre-6u31-windows-i586-s" u Can Download From HERE, hope this help

  • How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

    Hi Everyone,
    I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
    "Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
    http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
    Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
    Awaiting your response.
    Farid

    Hi ,
    LMS 3.2 is not supported on Windows 2008 Server Standard R2.
    here is the supported platoform for LMS 3.2
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
    Thanks,
    Gaganjeet

  • Desktop manager and windows 8

    I have attempted to get desktop manager to work with windows 8 for months.  I have ensured that I have followed various instructions including enabling .net 3.5 without success.  I install the desktop manager and my computer recognises the playbook when I plug it into a usb, however, the blackberry software does not  connect to the playbook.  Have tried turning off avast antivirus without success.
    Can anyone helpl with an alternative, please?
    It works with my MAC computer but not with my windows laptop!
    alun.
    Thanks

    I have the exact same situation, and to make it worse I can't even get the desktop manager installed, let alone work.  I keep getting error message #1723.  It's hard to know whether it's a Windows problem or a Blackberry problem, although if it works on your Mac I guess it's a Windows problem.  I bought a new laptop and am having trouble with a lot of incompatibility problems with Windows 8.1.  I'll have to revert to my old Windows 7 laptop unless someone comes up with an answer.  Hopefully someone in the Community has one [fingers crossed]. 

Maybe you are looking for