Installing ZLM-Agent 7.3 IR1 on SLED11

Hi
I just tried an install of the ZLM-Agent 7.3 IR1 on SLED11 and on executing ./zlm-install it continues with the installation and terminates with the error:
socket.error: [Errno 111] Connection refused
I tried running zlm-install again and it's hanging on:
Checking for the registered ZENworks service...
Inside /var/opt/novell/log/zenworks/zlm-install.log it is currently saying:
Jan 27 17:28:58 Executing command: /etc/init.d/novell-zmd stop
Any ideas?
Ricardo

Ricardo,
check if there is still a zmd process active:
# ps -ef | grep zmd
If there is one, kill it.
Then delete the zmd.db file from /var/lib/zmd and try the installation once again.
Rainer

Similar Messages

ZLM Agent Install Fails - NOTHING_PROVIDES_DEP:

Hi,
I am trying to install the zlm agent (ZLM 7.3 IR2) on a SLES 11 box.
I have extracted the ZLM Server ISO image files, and put it on an NFS server. The client box then mounts the NFS share and I run the command
./zlm-install -a -i
Sometimes the installation goes through fine, but lately I am getting the following errors on the agent install
Installing Component : ZENworks Agent
Installing ZENworks Agent | | 0% NOTHING_PROVIDES_DEP: /bin/sh needed by rug-7.3.2.0-0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-utilities-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-install-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-zmd-settings-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: libxml2 needed by novell-zenworks-zmd-rmagent-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policymanager-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policyenforcers-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-x11vnc-0.6.1-2.novell.0.8.i586
NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-tightvnc-1.2.9-6.novell.0.7.i586
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zislnx-7.3.2-0.0.0.i586
NOTHING_PROVIDES_DEP: libc.so.6()(64bit) needed by zmd-inventory-7.3.2.0-0.0.x86_64
NOTHING_PROVIDES_DEP: 'gconf2 >= 2.2.1' needed by novell-zenworks-zmd-gconfpolicyenforcers-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by zen-updater-7.3.2-0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zlm-release2-7.3.2-0.0.0.noarch
DEP_PROVIDERS_NOT_INSTALLABLE: 'novell-zenworks-zislnx >= 7.0.0' needed by novell-zenworks-zmd-imgagent-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
Install of ZENworks Agent failed.
Install has not completed
Here is the output from the log file
26 Mar 2010 13:08:43 INFO Daemon Received signal SIGTERM
26 Mar 2010 13:08:43 WARN ShutdownManager Preparing to shut down...
26 Mar 2010 13:08:43 INFO UnixWebServer Unix server stopped
26 Mar 2010 13:08:44 WARN ShutdownManager Shutting down daemon...
26 Mar 2010 13:08:44 INFO Daemon Final RSS size is 25708 KB
26 Mar 2010 13:08:51 INFO Daemon Starting ZMD version 7.3.2
26 Mar 2010 13:08:51 INFO Daemon Using Mono 1.2.6
26 Mar 2010 13:08:51 INFO WebCache Expiring cached files...
26 Mar 2010 13:08:51 INFO KeyManager Loading key whitelist
26 Mar 2010 13:08:51 INFO Daemon Loading trusted certificates...
26 Mar 2010 13:08:51 WARN NetworkManagerModule Failed to connect to NetworkManager
26 Mar 2010 13:08:51 INFO PackageManagementModule Using SAT backend
26 Mar 2010 13:08:51 INFO RPMBackend Loading installed packages
26 Mar 2010 13:08:51 INFO RPMBackend Finished loading installed packages
26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'NetworkManager' - 'NetworkManager support'
26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'Package Management' - 'Package Management module for Linux'
26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'ZENworks Server' - 'SOAP methods used by a ZENworks server'
26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'XML-RPC interface' - 'Export ZMD public interfaces over XML-RPC'
26 Mar 2010 13:08:51 INFO ServiceManager Not loading existing services
26 Mar 2010 13:08:51 WARN Daemon Not starting remote web server
26 Mar 2010 13:08:51 INFO UnixWebServer Unix server listening for connections.
26 Mar 2010 13:08:51 INFO DaemonHealth Current RSS size is 18740 KB
26 Mar 2010 13:09:01 INFO ServiceManager Adding service: file:///mnt/data/packages/edir/sles-11-x86_64
26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'edir'
26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/imaging/sles-11-x86_64
26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'imaging'
26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/server/sles-11-x86_64
26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'server'
26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/mono/sles-11-x86_64
26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'mono'
26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/java/sles-11-x86_64
26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'java'
26 Mar 2010 13:09:03 INFO ServiceManager Adding service: file:///mnt/data/packages/sles-11-x86_64/sles-11-x86_64
26 Mar 2010 13:09:03 INFO ServiceManager Successfully added service 'sles-11-x86_64'
26 Mar 2010 13:09:03 INFO ServiceManager Adding service: file:///mnt/data/packages/runtime-deps/sles-11-x86_64
26 Mar 2010 13:09:03 INFO ServiceManager Successfully added service 'runtime-deps'
26 Mar 2010 13:09:03 INFO ServiceManager Adding service: file:///mnt/data/packages/client/sles-11-x86_64
26 Mar 2010 13:09:03 INFO ServiceManager Successfully added service 'client'
26 Mar 2010 13:09:07 INFO Progress Progress.Stop Message: NOTHING_PROVIDES_DEP: /bin/sh needed by rug-7.3.2.0-0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-utilities-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-install-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-zmd-settings-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: libxml2 needed by novell-zenworks-zmd-rmagent-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policymanager-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policyenforcers-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-x11vnc-0.6.1-2.novell.0.8.i586
NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-tightvnc-1.2.9-6.novell.0.7.i586
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zislnx-7.3.2-0.0.0.i586
NOTHING_PROVIDES_DEP: libc.so.6()(64bit) needed by zmd-inventory-7.3.2.0-0.0.x86_64
NOTHING_PROVIDES_DEP: 'gconf2 >= 2.2.1' needed by novell-zenworks-zmd-gconfpolicyenforcers-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by zen-updater-7.3.2-0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zlm-release2-7.3.2-0.0.0.noarch
DEP_PROVIDERS_NOT_INSTALLABLE: 'novell-zenworks-zislnx >= 7.0.0' needed by novell-zenworks-zmd-imgagent-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
Those packages deps are installed and I have a SLES 11 repo setup - which works.
Thanks.

Hi Rainer,
Thanks for the response.
I tried what you said:
rpm -q --whatprovides /bin/sh
bash-3.2-147.3
Including the rebuild, but it didn't work.
I doubt its an RPM problem, because I can install any other package.
host-10-121-92-73:/mnt/agent # rpm -aq | grep squid
yast2-squid-2.17.10-1.32
host-10-121-92-73:/mnt/agent # zypper in squid
Loading repository data...
Reading installed packages...
Resolving package dependencies...
The following NEW package is going to be installed:
squid
Overall download size: 1.3 M. After the operation, additional 4.4 M will be used.
Continue? [YES/no]: yes
Retrieving package squid-2.7.STABLE5-2.3.x86_64 (1/1), 1.3 M (4.4 M unpacked)
Installing: squid-2.7.STABLE5-2.3 [done]
Additional rpm output:
Updating etc/sysconfig/squid...
host-10-121-92-73:/mnt/agent # rpm -aq | grep squid
yast2-squid-2.17.10-1.32
squid-2.7.STABLE5-2.3
While I was writing this, I tried to install the agent again after that squid rpm install and it appears to be working now.
It looks like the rebuild didn't do the trick, but install any new RPM sorts it out.
Thank you very much for the help.

ZLM Agent IR2 agent installation fails

Hi all
I have installed ZLM 7.3 IR2 Server in SLES 10 SP2. The ZLM Server setup is not able to complete on sles11 server, the system hangs. Also when trying to install the ZLM 7.3 IR2 agent on SLED 11 OS, the installation starts & hangs in the middle.
Some of the error messages are
1)Error no 111 Connection Refused
2) when executed the zlm-config file it displays the "OS is not supported version"
The SuSEfirewall is set to stop & iptables rules were not set.
I have tried the ZLM 7.3 IR2 agent installation in a freshly installed SLED 10 machine, but the machine is not able to contact the server (host name not found). I have not configured DNS service in the server machine. Please provide suggestions in the ZLM 7.3 IR2 agent installation.

baranii,
a few questions for my understanding:
I have installed ZLM 7.3 IR2 Server in SLES 10 SP2.
This is a running ZLM server and you try to register the other devices to this server. Correct ?
The ZLM Server setup is not able to complete on sles11 server, the system hangs.
SLES 11 or SLES 11 SP1 ? For SLES 11 SP1 you would need to use ZLM 7.3 IR3.
Do you want to install another ZLM server on this SLES 11 server or just the agent ?
I have tried the ZLM 7.3 IR2 agent installation in a freshly installed SLED 10 machine, but the machine is not able to contact the server (host name not found). I have not configured DNS service in the server machine.
The agent must be able to resolve the dns name of the zlm server.
You can either configure DNS or you can add an entry to the /etc/hosts file of the managed device. But you must make sure the device can afterwards ping the ZLM server by its name. (ping <ZLM Server Name>).
It is possible to register the zlm server by its ip address and not by it's name, but5 I would recommend to use the dns name.
So if you have fixed the name resolution and retry the agent installation, verify the zlm-install.log file if a installation fails. That log file is available in /var/opt/novell/logs/zenworks. Go from the end back and look for errors or warnings.
Rainer

ZLM Agent IR3 Registration During Installation Fails

Greetings,
We've recently started to look into using Novell's ZENworks Linux
Management product, but have run into a slight snag that has prevented
us from being able to continue evaluating the product. We had no issues
with the ZLM install, but have been unable to get past the initial
installation of the ZLM Agent on the servers we want to manage. We are
using the latest Interim Release 3 version in both cases.
Servers involved:
* ZLM installed via ZLM73_Server_with_IR3.iso on a Red Hat Enterprise
Linux 5.5 64bit server.
* ZLM Agent install attempt via ZLM73_Agent_with_IR3.iso on a SUSE Linux
Enterprise Server 10 SP3 64bit server.
* ZLM Agent install attempt via ZLM73_Agent_with_IR3.iso on a Red Hat
Enterprise Linux 5.5 64bit server.
In either of the two ZLM Agent installation situations, we receive the
same errors during the installation, though we also tried to use a
registration key on the second attempt with the RHEL server.
Additionally, we are currently using the 90-day evaluation license with
the ZLM server, and it has not expired yet. The errors produced during
the install of the agent, as seen in the /var/log/zmd-messages.log, have
been attached to this reply. The most obvious issue, unless we're
mistaken, seems to be the following:
11 Aug 2010 00:07:53 INFO ZenService Registration failed:
System.InvalidOperationException: Not supported Content-Type in the
response: 'text/html;charset=utf-8' Response error message:
Any assistance with this would be greatly appreciated.
QC

Thank you for the speedy response. We actually managed to correct this
with a re-install of zlm using the standard ports, as we suspected the
setup of zlm to run on an alternate port, 8443, may have had something
to do with our issue (when registering the zlm agent, we were able to
successfully use $host:8443, with the exception of xml content-type error
during the registration portion of the zlm agent install of course).
Sorry, some of this information was left out of our previous reply, as
the attachment that was mentioned has this information but was left out,
and we had issues replying to our original post, due to post filter
errors from the nntp server, when trying to include it.
To address some of your recommendations, for the benefit of others
running into a similar situation:
On Wed, 18 Aug 2010, brunold wrote:
>
> QC,
>
> that sounds all good except the registration problem.
>
> Okay first a note on how you can check the registration of the systems.
> Run "rug sl" and if there is a registration, it shows you the ZLM server
> as active, pending or something. If there is not registration you can
> add it via "rug sa -t zenworks https://<DNS or IP address> -k
> <registration key>".
* This would not show our system as being "registered".
> So now to your problems:
>
> Depending if you try to register the ZLM server via a DNS name or the
> IP address I would try to ping it from the client to see if the
> communication / name resolution works.
>
> I assume you use a DNS name. Correct ?
* Well, there didn't seem to be any connectivity issues going over the
zlm agent log, and we could connect to the zlm server just fine whether
via fully qualified domain name or IP. Our initial attempts, which
didn't account for the alternate 8443 port the zlm server was setup up
on would log obvious connections errors which disappeared when we
specified the port.
> The next question would be if you have configured a proxy on those
> systems you use for internet access that needs a proxy login. In case
> the system has one configured, the zlm client would use it as well. You
> could check that by running "rug get" and check the proxy url. If there
> is one set, you can remove it from rug by using "rug set proxy-url ''".
> Then try registering again.
* We weren't using a proxy, it was a direct connection from the zlm
agent to the zlm server.
> If that is not the case next you can open a browser on such a server
> and enter the DNS name or IP you use for the registration in and see
> what you get. If you have no graphical environment you can use wget for
> that as well:
>
> wget --no-check-certificate https://<DNS anme or IP address of the ZLM
> server>
>
> When the client registers, it also simply uses the https protocol to
> communicate to the ZLM server. Therefor a biowser or wget can test the
> general access very well.
>
> So see what you get with this test.
* We were able to access the zlm server just fine, the (web)
administration interface as well. The "registration" issues we were
having seemed to be the registration done in the course of the zlm agent
install, after mounting the zlm agent iso, cd'ing to the mounted
directory, and running: ./zlm-install -a
>
> Ahhh, not sure if that could make problems, but time is synchronized
> within your server environment ?
* Well, time is off by no more than a few minutes between the servers
currently, and will be corrected via ntpd, but in this case, we did
manage to get this working despite this.
>
> Rainer
>
>
> --
> brunold
> ------------------------------------------------------------------------
> brunold's Profile: http://forums.novell.com/member.php?userid=562
> View this thread: http://forums.novell.com/showthread.php?t=418630
>
>
QC

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

Identify where to install SCOM Agent on SCCM Site hierarchy.

Hello..
We have a SCCM Site environment where there is one CAS site, other 5 Primary site servers and one DB server .All are in different machines (7 VMs).i need to monitor complete SCCM site hierarchy.Next on which machines i need to install SCOM Agent on both CAS
and all Primary Site Server.
Thanks
RICHA KM

Hi RICHA,
Hope it helps:
http://blogs.technet.com/b/kevinholman/archive/2012/12/11/monitoring-configmgr-2012-with-opsmgr.aspx
http://blogs.catapultsystems.com/cfuller/archive/2012/01/26/opsmgr-2012-scom-and-configmgr-2012-sccm-q-a.aspx
http://msandbu.wordpress.com/2012/04/23/monitoring-sccm-2012-via-scom-2012/
Natalya

Error while installing OEM agent

Hi All
Below is my environment details.
Oracle - 10.2.0.4.0
Linux - RHEL5 - 2.6.18-128.1.6.el5
Two node RAC environment
I am following my company documents for installing OEM agent.
I executed the below command
agendDownload.linux_x64 -n <cluster_name> -c nodename1-vip,nodename2-vip
I got below error
Performing tests to see whether nodes nodename1-vip,nodename2-vip are available
SEVERE:OUI-25023:The local node is not selected for installing this product. Include the local node in the cluster list or perform the installation on the nodes on which the install is to be performed.
Can somebody help me why I got error. i pinged both the vips and am able to ping.
i have another doubt. Do i need to mention vip name or just host name?
Edited by: user1368801 on Aug 12, 2009 9:56 PM

Thanks Surachart
I checked the inventory.xml file
Only hostnames (not VIP) are mentioned in the inventory.xml file. That means, do i need to mention only host names?
Since I am following the company standard document, I need to be 100% sure before deviating from the document or else taking this vip issue to the document authors.

Install SMD agent on EP6 fails

Hi,
I get an error when installing SDM agent on EP6 (HP-UX):
STEP 7: checking P4 Connection and SMD Agent Registration
External Command Executed:
/opt/java1.4/bin/java -DP4ClassLoad=P4Connection -Dsap.p4.remote_classloading=false -cp ":/usr/sap/SMD/J97/SMDAgent/lib/sapxmltoolkit.jar:/usr/sap/SMD/J97/SMDAgent/lib/smdagent.jar:/usr/sap/SMD/J97/SMDAgent/lib/tc_sec_secstorefs.jar:/usr/sap/SMD/J97/SMDAgent/lib/iaik_jce_export.jar:/usr/sap/SMD/J97/SMDAgent/lib/launcher/logging.jar:/usr/sap/SMD/J97/SMDAgent/lib/smdserver.jar:/usr/sap/SMD/J97/SMDAgent/lib/exception.jar:/usr/sap/SMD/J97/SMDAgent/lib/sapj2eeclient.jar:/usr/sap/SMD/J97/SMDAgent/lib/launcher/smdagentlauncher.jar:" com.sap.smd.setup.Setup /p4connection
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
P4 Connection succeeded but SMD Agent Registration failed
Root exception is: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of smdserver.
I couldn't find anything on SAP Market Place but a similar thread here advised to check if SDM servers is not in maintenance mode.
Well, it's not.
Can someone please help?
Thx
Bert

Hi,
Did you connect to smd server http://host:port/smd and desactivate maintenance mode in Agent Administration page?
This should solve your issue.
Regards,
Frederic

Installing EM agents with multiple oracle owners

Hi
I am planning to install and configure EM Grid Control in my environment. How many agents do I need to configure if I have several oracle software owners on a server e.g.
server1:
- oracle9 for Oracle 9i database
- oracle10 for Oracle 10gR1 database
- oracle102 for Oracle 10gR2 database
server2:
- ora1 for Oracle 9i DB
- ora2 for Oracle 9i DB
- ora3 for Oracle 10gR2 DB
Do I have to install 3 agents on each server (agent per Oracle software owner) or do I have to install only 1 agent per server?
Regards,
Jarek

Hi
there is no central inventory. We are modifying it for every Oracle installation. Therefore we have several /var/opt/oracle/oraInst.loc* files. There is one file per Oracle OS user. So it is as I wrote - each installation has its own inventory in:
/oracle/app/<ORACLE_SID>/oraInventory location
BTW. It's HP-UX and oraInst.loc is in /var/opt/oracle/ directory.
Regards,
Jarek

Install Nagios agents on Solaris 10 to monitor from RHEL 5

Hi,
Could anyone let me know the steps to be followed to install Nagios agents on Solaris 10 for monitoring from RHEL5. It is very urgent please help me.
Thanks
Rao

Hi Sugunakar,
There are a few small things I can think of checking:
I am trying to install SMC on solaris 10What version of Solaris 10 are you using? You need 11/06 (aka "Update 3") or later. Also, it looks like this is on a V210: how much memory and swap do you have ([requirements here|http://docs.sun.com/app/docs/doc/820-2215/deployment-72?l=en&a=view])? And have you [edited your /etc/project file|http://docs.sun.com/app/docs/doc/820-2216/chapter2-1000?l=en&a=view] to adjust the shared memory settings?
Have you applied any of the [patch sets|http://forums.halcyoninc.com/showthread.php?t=104]?
smcdatabase service is always in maintenance mode.It would be interesting to see what that service log says. Look in /var/svc/log/application-management-sunmcdatabase:default.log for clues.
/var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh: /var/opt/SUNWsymon/db/data/SunMC/pg_hba.conf: cannot createIs there any reason why SunMC may not be able to write to /var (or /var/opt/SUNWsymon)? Maybe portions of /var are read-only (shared from a global zone, or over NFS)?
I've done a lot of SunMC pilot projects over the years: if you could use some help speeding up your eval just send me an email.
Regards,
[email protected]

Error installing Policy Agent

When installing policy agent I get an error: "No X11 DISPLAY variable was set".
I've tried running it with the -nodisplay option and have tried setting -Djava.awt.headless=true in the setup script to no avail.
Any help would be greatly appreciated.

If you have display environment(X server), you can set DISPLAY to local host and try tthe -nodisplay option.
If you don't have the X environment, you need to follow a different method. I don't know which agent you are installing. For example, for Sun web server 6.1 agent, you could do this:
1. pkgadd -d . SUNWames6
2. cd /opt/SUNWam/agents/es6/bin/
3. invoke config script there: ./config . This configures you web server instance, setup AMAgent.properties and debug directories etc.
4. Restart web server instance.
thanks,
shivaram

After install NAC agent I must remove cable before open windows session normaly

Hi
I use ISE 1.1 and NAC agent 4.9
I have configure my catalyst 2960 port with dot1x and install NAC agent on many computer
But I observed that I am unable to open windows session on some computer (windows 7)
When I enter login and password, then I got black screen and nothing else, then if I remove the network cable on my computer, the black screen change and move to the windows desktop normaly
Why do I need to remove network cable before get to my desktop normaly ?
Please How can I fixed this issue ?
Thanks in advance for your help

Hi
The given link might be helpful regarding your issue:
http://www.cisco.com/en/US/netsol/ns466/index.html
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5707/ps8418/ps6128/product_data_sheet0900aecd802da1b5.html

Install protection agent failed. Error 324

Hi
So this is my problem.
I have 2 Windows 2012R2 servers, where DPM2012R2 are installed on server2.
They are both on the same domain and network. I have talked to the network team and there should not be anything that stops the DPMserver from talking to the agent on server 1.
The errors i get are:
Install protection agent on BRG-WI-HV01C01.felles.firma.no failed:
Error 324: The agent operation failed because the DPM Agent Coordinator service on BRG-WI-HV01C01.felles.firma.no did not respond.
Error details: Internal error code: 0x8099090E
Recommended action: Do the following to troubleshoot this issue:
1) Verify that BRG-WI-HV01C01.felles.firma.no is remotely accessible from the DPM server.
2) If a firewall is enabled on BRG-WI-HV01C01.felles.firma.no, make sure that it is not blocking requests from the DPM server and has an exception for Windows Management Instrumentation(WMI).
3) Try installing the agent manually by selecting "Attach Agents" in the agent installation wizard
AND
Agent operation failed. (ID: 370)
The agent operation failed because the DPM Agent Coordinator service on BRG-WI-HV01C01.felles.firma.no did not respond. (ID: 324)
I have done every test, firewall is of, the server is accessible, i have tried installing the agent manually and attaching it. Same errors.
I have even tried removeing SCDPM and installing it again.
Anyone have any idea what this could be?
I tried installing the dpm agent from another server I have, and that worked fine. This DPM server is not on the same location or network, but they are in the same domain.

Hi,
<snip>
I also tried to start the DPMRA service on the protected server and I get this error:
Windows could not start the DPMRA on local computer.
>snip<
This problem needs to be fixed - the dpmra needs to be able to run either by manually starting it or by normal "on demand" request when a DPM job is initiated.
If you look in the C:\Program Files\Microsoft Data Protection Manager\DPM\Temp\dpmracurr.errlog and see if there are any clues why it cannot start.
Manually delete any files or folders under the MTATempStore$ share on the DPM server. This is typically the c:\Program Files\Microsoft DPM\DPM\temp\MTA folder.
DO NOTE DELETE the MTA folder itself.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Can MOPZ be used without installing Diagnostic Agent.

Hi,
I need a clarification.
In Solution Manger 7.1 Version, can I use Maintenace Optimizer (MOPZ) to download SP's for a Managed System without prior installing Diagnostic Agent on the Managed System? If Yes, please write a brief procedure as below. (because my colleague was telling that one must install DA before using MOPZ).
In older Versions, to use MOPZ:
Send Managed System data with tcode RZ70 -------> The data will arrive in SLD of Solman -------> Assigning a Product and creating a Logical Component in SMSY -----> Assigning the Logical Component to a solution in DSWP --------> Now MOPZ can be used.
Thank you,
Mohan.

Hi Mohan,
Not required any agent for MOPZ setup.
Prerequisite:
*Initial, Basis and Managed system configuration setup( RFC creation, AISUSER assignment)
Open the MOPZ using 2 ways,
option 1. Using LMDB system landscape
option 2. In solman_workcenter -> Change Management -> New Maintenance Transcation ( for new MOPZ)
Prerequisite:
User ID is maintained in AISUSER
Configured Technical System in SMSY.
Follow the below documnet for MOPZ step.
http://scn.sap.com/docs/DOC-26893
Not required to create the solution as show in documnet , directly select the production version and start the MOPZ as show the document, remaining step are same.
Step by step how to Configure System for using MOPZ
Rg,
Karthik

Not able to install sccm agent in sccm 2012 servers after cu3 update

not able to install sccm agent in sccm 2012 servers after cu3 update
MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002 ,below URl specify fix to uninstall Management point ,but in sccm 2012 secondary site canot unintall management point ,please help to install agent in config manager servers
https://blogs.technet.com/b/configurationmgr/archive/2013/11/25/hotfix-quot-error-25150-setup-was-unable-to-register-the-ccm-service-hostingconfiguration-endpoint-quot-when-you-try-to-install-the-client-agent-in-configuration-manager.aspx
ankith

Excellent Article!!!!!! Pls check here, Follow the same steps
http://eskonr.com/2013/09/sccm-configmgr-2012-sp1-cu3-installationcollections-upgrade-clients/
This too
http://it.peikkoluola.net/2013/11/18/update-sccm-2012-to-sp1-cu3/
Thanks, Prabha G

Installing ZLM-Agent 7.3 IR1 on SLED11

Similar Messages

Maybe you are looking for