Installing ZRS looking for zrs-resource.zip

First time installing Zenworks Reporting --
A bullet point from the Novell Zenworks 11 Documentation :https://www.novell.com/documentation...a/bb1nakx.html
"zrs-resource.zip: Download the ZENworks resource file from from Novell Web site for ZENworks Reporting 5. This contains domain and reports for ZENworks Configuration Management 11.2.4."
I haven't been able to locate this zip file. Can anyone send me down the correct path?
Thanks in advance
Scott Shumway
[email protected]

http://download.novell.com/Download?...d=BIHocOn-bgA~
Same place you download the 11SP2 ISO.
On 6/26/2014 7:16 PM, shumways wrote:
>
> First time installing Zenworks Reporting --
>
> A bullet point from the Novell Zenworks 11 Documentation
> :https://www.novell.com/documentation...a/bb1nakx.html
>
> "zrs-resource.zip: Download the ZENworks resource file from from Novell
> Web site for ZENworks Reporting 5. This contains domain and reports for
> ZENworks Configuration Management 11.2.4."
>
> I haven't been able to locate this zip file. Can anyone send me down
> the correct path?
>
> Thanks in advance
> Scott Shumway
> [email protected]
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Similar Messages

  • I cannot install or remove old itunes, install is looking for an msi

    When I try to upgrade to lates Itunes or Quicktime, I get error message saying it cannot find an msi on a network drive. Same error message if I try to uninstall the existing itunes.

    Follow these instructions to completely remove Apple software
    http://support.apple.com/kb/HT1923
    Then use free Ccleaner to repeatly repair your registry until it's fixed.
    http://www.piriform.com/ccleaner/download/standard
    download iTunes again from Apple.
    http://www.apple.com/itunes/
    If you have 64bit Vista or Windows 7, look for the seperate download of iTunes for that further down the page.
    Once installed, use the Apple Software Update under your Start Menu to fully update all Apple components.
    Your content will remain on the drive in the Music > iTunes Folder, nothing is deleted.
    You  should be making backups of your content regularly, either through  iTunes or via copying the iTunesFolder in your Music folder to a  external drive.
    Windows  is notorious for having "other" issues that make it unstable, we as  volunteers helping others can't always resolve those issues.
    After doing the steps above, stand by and others may be able to assist you.

  • Cannot access itunes. says installed by a later version,, says network installed..look for itunes.msi..??? HELP

    I cannot access itunes..errror message, library installed by a later version of itunes..network???..cannot delere or reinstall either..please help..thanks...also says look for itunes.msi??

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Looking for free resources on the web for Primaver

    I am looking for free sources on the web for Primavera. I
    want to study the program.

    Primavera Support can give you access to a free one
    day web based training class if you have a current
    license.

  • Looking for good resources/articles

    Hi All
    I know this isn't exactly the right place, however I know the collective knowledge and wisdom in this forum is great, so here goes:
    Can anyone point me to some good articles relating to digital noise when shooting HD? At the university I work I am constantly having to defend the post-production workflow because of digital noise in our productions. I put it down to lack of light when shooting but, for some reason, I have a hard time getting my message across. So, any good articles on this topic will be greatly appreciated.
    We record on P2 using the Panasonic 202/502 (think they might be called 201/501 in the states).
    Have a splendid day!
    cheers
    -j-

    Google. Look for VIDEO GAIN and SIGNAL TO NOISE RATIO
    Noise is created when gain is applied. This cannot be prevented, it is physics. A weak signal is boosted by artificially processing the pixel information. Deep black areas have noise in them—random sparkly pixels—because the sensors do that when they are not stimulated properly by having light fall on them. when the signal to noise ratio is high, the noise is hidden in the signal, suppressed. When the amplification is applied to the signal, the SNR goes way down because those random sparklies get bigger and brighter.
    I blame your professors and teachers. Your kids have failed to learn how to light because their cameras have been sold to them as either "super low-light capable" or they have a gain switch on them that might not include the option to be manually over-ridden. Simple education in proper shooting technique includes using lights and how to read a light meter. What's the world coming to?
    bogiesan

  • "Error: the xajax Javascript file could not be included. Perhaps the URL is incorrect? URL: /includes/javascript/xajax_js/xajax.js". other posters with a xajax error on this board got the response to go look for developer resources. (i'm not a developer)

    I'm on a mac running 10.6.8, was using Firefox 6.02 when the problem started, i performed a clean install of 7.01, installed the latest Flashplayer, and reinstalled java (the 10.6.5 update file from apple's site).
    I seem able to load video at youtube.com, and was able to load web-based irc chatrooms at ircchat.tv. however, at jamplay.com a paid member site, all of the lessons are flash video, and there's a live video feed chat room that is also flash based, and I am not able to view this content. the video content pops up the error message "Error: the xajax Javascript file could not be included. Perhaps the URL is incorrect?
    URL: /includes/javascript/xajax_js/xajax.js" and the clicking on the "launch chatroom" button does exactly nothing.
    I have contacted the jamplay site team but their recommendations are the steps I have already taken, mentioned above, that did not resolve the issue.
    some links to content on their site visible without being a member:
    http://www.jamplay.com/
    this one has a flash interface that, if things were working, would have a video in the center and members and staff talking abouth that area of the site when you click on one of the title buttons. Now that I am having this problem, nothing is clickable and there's no indication that there should be a video in the center. The error message regarding xajax does not come up at all.
    http://www.jamplay.com/guitar-lessons/beginners/1/527-16-circle-of-fifths
    same thing. video content is missing, xajax error does not appear.
    http://www.jamplay.com/live
    when I load these all content except the video loads on the page. this page does not give me the error at all, just does not load the video
    I can't seem to recreate the actual error without being logged in as a member of the site.
    The apple support team gave me a one-time free suppport ticket to troubleshoot an ethernet issue I was having. Unfortunately, the databases I removed were not deemed either by apple or me to be noteworthy or necessary to retain (all of them were for software I not longer have or use). I don't know which plist file might have been the one I need now. I did reinstall the java and flash items. The only other item that I think it might be is a set of belkin router software that I uninstalled because i'm not using any belkin hardware anymore.
    If someone has any kind of idea I would be most appreciative.

    That's a comment in the file. It has no effect at all.

  • Unable to Install Panther:looking for a hero

    I was having major issues regarding keychain access with my G4 a while back.
    After running TECHTOOLPRO 4 on the computer and finding some bad blocks I reinstalled the OS that came with the computer. (OS 9.2 and 10.1)
    Everything was going well until I started to upgrade to Panther.
    After 60% installation, the process would stop. The disc seemed a little compromised so I borrowed Panther from someone else.
    Now, when i try and install 10.3, the computer hangs and I get-
    panic (cpu0): Unable to find driver for this platform: Power Mac 3,5"
    blah blah numbers
    and
    some kernal panic jargon.
    The OSX disc that came with the computer will not activate (the install bounces and dissapears.)
    CD's will not mount as an image but will show up in iTunes.
    Anyone ever experience and overcome such problems?
    send help.
    the ship is sinking.
    reddbeard

    The error typically occurs because you are using a machine specific disk that came with a particular Mac model (has a gray label.) They cannot be used on other models. You need a retail version of Panther.
    Frankly, I would not upgrade 10.1. You cannot repair permissions reliably, there are changes in the disk drivers, and it's a big leap from 10.1 to 10.3. If I were you I'd backup your personal files, boot from a retail Panther installer disc, erase the hard drive and install fresh.

  • Our 3rd party extension causing DW CS3 to crash ... looking for consulting resource

    We have been maintaining an extension that creates Plateau
    (LMS) compatible questions since Dreamweaver MX2004. We updated it
    to work with Dreamweaver 8, and then updated it again for
    compatibility with Dreamweaver CS3. However, the extension now
    seems to crash Dreamweaver CS3 after we create a question (i.e.
    close the extension window).
    My feeling is that there is something in Dreamweaver that has
    changed since the previous version, either in the API that is used
    by code somewhere in the extension's files or in the way the
    application interacts with the extension's HTML. Something is
    making Dreamweaver unstable, and it does not seem to be any of the
    new code that we put in during the extension updates.
    I ran the crash through Visual Studio's debugger, but all I
    got was a cryptic error message: "Unhandled exception at 0x0083a03e
    in Dreamweaver.exe: 0xC0000005: Access violation reading location
    0x00000090." Looking at the disassembly did nothing to make the
    issue any clearer.
    Is anyone else experiencing crashes with extensions in CS3?
    What would be some of our options here? Are there
    consultants/experts who we could discuss an engagement to look at
    this?
    Or if the issue is within CS3 API - is there some one from
    Adobe monitoring this forum who might be able to point us to a
    technical sales person where we could discuss fix options with
    Adobe?
    THanks,
    Stephen

    Have a look here http://foundation.zurb.com/docs/components/reveal.html

  • VZAccess Manager install hangs looking for previous versions of software

    UGH!  Trying to install the VZAccess Manager for the UM175 USB modem.  Driver installs but it gets to the point of the installation where the message box says "Checking for previous versions of VZAccess Manager..."
    It just sits there and never goes away.  FRUSTRATING!!!!  The driver actually installs but the manager software never does.  What gives?
    Oh ya...Windows 7 is the OS

    VZAccess Manager software must be installed before inserting the PC Card / USB Modem into the computer for the first time. Only after the software has been installed can Windows successfully install and configure the PC Card / USB Modem.
    Start Device Manager.
    Windows 7 Click Start > Control Panel > System and Security > Device Manager.
    Click on the link below on using device manager.
    http://support.vzw.com/clc/devices/knowledge_base.html?id=20416

  • Looking for Music Resources

    Hello. I'm trying to create a presentation that is somewhat similar in style to the old public service films they used to show in schools. To achieve this effect, I need to find some cheesy "elevator" music to use for a soundtrack. Anyone know of possible resources I can try for such music?

    Try Freeplaymusic.com
    If you're not selling your video, it's usually free to use their stuff (the Lounge collections are a gold mine). You could also check out some of the stuff DigitalJuice.com has, but my guess is you won't find much there that works for what you want style wise.

  • SD General: Looking for Good resource

    Hi all,
    Is there any other good resources to refer to in customizing, trouble shooting SD issues, understanding operational processes.
    I only know SAP library, this forum as my main resource.
    If you know good resources to refer to, please advise me.
    I usually have to go to my customer's site by myself, and I have no resorces to ask around me.
    Thank you!

    Hello,
    like sdn you have couple of other forums too...
    it-toolbox.com
    yahoogroups (sales and distribution forum).
    Prase

  • Looking for SampleProject-1013x.zip

    Hi everyone,
    This file is referenced in the WCI ui customization guide, but I can't find it. Does anyone have it or know where it is?
    Thank you!
    Pattie

    Hi user7608416,
    Not absolutely sure.. but, You might want to start here:
    https://codesamples.samplecode.oracle.com/
    Cheers!!

  • Looking for aspxmps115 . zip  file

    Hi.  I'm looking for the aspxmps115 . zip file that contains samples for version 11.5
    I found two documents that mention aspxmps115 . zip file but none of them have a link to the file that works.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30bedd67-5f1e-2b10-1bb8-c710ec9ca50a
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313339333433373330%7D.do
    Does anyone know where I can download .zip file?
    Thanks

    Hello Yurii,
    These samples are located on the Business Objects Download page.  Start from the Business Objects link above in horizontal menu bar, then click the Business Objects Download link on the left after that page loads.
    Once you get to the Business Objects Download page set the search criteria to these values:
    Software Product - Crystal Reports
    Product Version - XI Release 2
    Software Type - Sample
    After searching look for the "[RDC ASP Samples for CR XI R2 (Developer Edition only)|https://smpdl.sap-ag.de/~sapidp/012002523100005919782008E/aspxmps115.zip]" - probably at the bottom of the list.  This is the link for the aspxmps115.zip file.
    Sincerely,
    Dan Kelleher

  • Agent 10.2.0.3 install on OEL5 looking for OEL4 packages?

    We are trying to install Oracle grid control management agent 10.2.0.3 on OEL5 x86_64. The install is looking for packages which are not contained in OEL5. It is looking for pdksh, openmotif21, xscreensaver. These packages are available for OEL4. How do I install the agent?

    Please check the metalink certification.10203 agent is not supported against 64 bit OEL, it certfied only on 32 bit OEL.

  • I blog on TypePad using Word 2007 and documents freeze when I'm looking at them in Windows explorer; why do I get the error message that Mozilla is looking for a script?

    I have now had two error messages - the first one looked for this script: Script: resource://gre/modules/XPCOMUtils.jsm:258. The second one (today) looked for Script: resource://gre/components/nsPrompter.js:68.
    I have reset my word template, also reset word registry for data and options (as per Microsoft's help pages) for both those 'fixes' there was an initial improvement, but the problem happened again after I reposted on my blog today and then went to Windows explorer to view my files. It seems to 'seize' as I select a file, so that the preview does not appear (for up to 15-20mins).
    I see on the internet using the second script as a search just now that one other has had a similar problem and one also since Mozilla 4 upgrade. My problems have also been pretty much since I upgraded.
    It happens (apart from my fixes) every time I go to look at a word document via Windows explorer. Excel files are less affected.
    One web suggestion is to clear the cache, but I am hesitant to lose all my passwords unless I have to.

    I still have the problem although I uninstalled Mozilla (clearing the cache didn't work and neither did Word diagnostics), so have ended up thinking it could be Norton (the manual update worked x1) or Windows. Today I found an answer: disable the preview pane in Windows Explorer - there's a history of problems with this view.

Maybe you are looking for