Installion missing components on Intel iMac

Although the Shockwave installation prompt says the "Software
successfully installed," when I access my favorite puzzle site, I
get popups saying "Missing Shockave Decompression XTRA," followed
by "Shockwave Error: Error playing Director movie."
I have a new Intel-based iMac and feel that I'm caught
between a rock and a hard place.
I am concerned that no one from Adobe seems interested in
answering the questions posted since many of them have languished
without replies. They certainlly will not answer Shockwave
quesitons over the phone. If anyone out there has suggestions, I
will appreciate receiving them.
TeddyZ

???? i'll type this again. i HAVE installed the print drivers on the LEOPARD machine . SO i have the correct printer selected in prefs and I can print BUT i have NO options for choosing printer management, paper, print options, color management etc.
there's an issue obviously because its listed on the epson support pages BUT there is no fix for me.
http://www.epson.com/cgi-bin/Store/support/supAdvice.jsp?type=highlights&noteoid =94207#options%20missing

Similar Messages

It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

My hard drive continually has the floating beach ball and will take massive time to fulfill a request. And then will not boot up...so then I have to do a restore and rebuild hard drive from a past saved time machine version. Works for a little bit...then the floating beachball comes more and more...until it will not boot up again. So then I restore from a previous time machine saved version....and again it works for a day or so ... until it happens again. Now it's happening faster and faster...so I think my hard drive is dying.

I just replaced the power supply in my Intel imac and now the screen is really really dark and I see the missing folder icon, what do I do?

The power supply in my Intel iMac went out (and smelled pretty burned) so I replced it and now when I start it up the display is so dark I can hardly see it and it shows the missing folder icon. Is it the inverter? Or if shine a flashlight on it and re-install the OS will changing the display settings maybe fix it?

Thanks for ur quick reply to my problem. I tried all of that with no results... I did notice tho that the lights next to and above my caps lock key and my num lk key are now flashing. They flash in unison three times then there is a two second pause then they flash three more times and this repeats. They may have been doing this before I tried this solution but I did not take notice until now... I was also wondering how I am supposed to know, after pressing f10 to enter bios, how I can tell if my new drive is being detected when my monitor will not function? Was pressing f10 supposed to possibly make the monitor turn on? In a last ditch effort to try and further identify the problem, I re installed my old drive. Before replacing it my computer would begin to boot then display a hard error that would not allow me to continue booting and run Windows. My display would still work but I could not run Windows. After re installing the drive the monitor will not turn on. I'm beginning to think that I have a bad monitor. Is there a way of testing this with out buying one? Where does the monitor connect to the mother board? I wonder if maybe its been jarred loose, although I highly doubt it, it may still be worth looking at. Thanks again for your advice.
Casey

Intel iMac won't play Real Audio samples from Amazon

I know this problem could reside with Amazon or Real Audio, but the Apple forum seems the place where knowledgeable and helpful folks hang out, so here goes ...
I've got a brand-new Intel iMac. Going to Amazon, I can no longer listen to sound samples, as they are all in Windows media and Real Audio. The former is not supporting new Macs. As for the latter, I installed (and reinstalled) the latest Real Audio player, but when I try playing an Amazon sound sample, the RA player says "components are missing."
I've already checked my Mac's sound utility to make sure it's at 44.1K (it is, and was), but the problem persists. Any ideas?
Thanks.
intel iMac Core 2 Mac OS X (10.4.8)

Hi. I was trying to listen to the Real Audio soundclips for this product:
http://www.amazon.com/exec/obidos/tg/detail/-/B000001HK2/ref=ordcartshr/104-0837028-4891132?%5Fencoding=UTF8&v=glance
Regarding, the VideoLan player, I was under the impression that it would not play through a browser, but required the file to be downloaded first. Is that correct? (Amazon soundclips don't download, I believe.)
Thanks.
G4 Sawtooth Mac OS X (10.3.9)
iMac Mac OS X (10.4.8)

09 "Missing Components" different question

I am merely trying to move my iMove 09 from original hard drive to another internal drive. I get the "missing components" message. I no longer have the disc for my G5, my wife has one for her Intel iMac, does me no good. What I need to know is.. What are these components, where are they located, so I can drag them to second drive.

I just tried running Desktop as Administrator in Vista, and when I run it that way, all my data is there.

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

An Intel iMac AND a MacBook Pro for Logic Pro?

I am torturing myself over this issue lately so any input you guys could offer would be welcome!
This is the situation:
After 3 months of serious debating whether to purchase a 20" Intel iMac or a MacBook Pro for Logic Pro, I went ahead about 3 weeks ago and got the iMac. My reasoning behind this was that even though I found the portability of the MBP very desirable, the iMac simply represented a better value with the big screen and bigger hard drive. Since getting it, I must say I love this machine and I have not had one single problem with it. Logic 7.2 runs like a dream on it. By the way, aside from maintaing my iTunes Library, occasional iLife stuff and web surfing with Safari, this iMac is for music production only.
But here's the problem:
Still, I can't seem to shake the desire for OCCASSIONAL portability. Keep in mind, I am only a "serious" music hobbyist; I create instrumental hip-hop, trip-hop, electronica style of music mainly with software instruments, loops and breakbeats. So needless to say, I don't tour or do a lot of travelling. But the prospect of being able to compose tracks or make beats in Logic anywhere is DESIRABLE to say the least. I could compose while sitting on the couch watching a game or laying in bed - even though I have no idea of how often I'd actually do that, just having the ability to do it is VERY APPEALING to me. Throw in the fact that the iMac currently shares deskspace with a PC that my wife uses - meaning that I often have to stop what I'm doing to let her use the space. With a laptop, I could move and still continue my flow. Lastly, I unfortunately have bad knees and a bad back so after a couple of hours (or 3 or 4) of sitting at the desk working on Logic, I am seriously hurting. Not comfortable at all. At least owning a MacBook would give me the option to move around to some place more comfortable if I desire.
So...
Even though I recently bought a wonderful iMac that works great, I'm seriously considering getting a 1.83 MBP with at least 1GB of RAM and the 100GB/7200 RPM drive to accompany it just for the portability factor. Sure, I could get a used G4 PowerBook or iBook, but all I own is the Universal Binary of Logic Pro; I would have a hard time accepting the decrease in speed I've gotten use to on the Core Duo. Besides, I inherently have a problem buying something (even used) that I know is old and out of date when the latest and greatest is available.
So here is the $25,000 question: Am I nuts for even considering this? Am I placing too much of a premium on the portability as I would use it?
This could easily be justified if I was a working musician on the road, but that ain't me. And you can believe that I'm definately not rich and thus don't have money lying around.
But I have obsessed over this so much lately, I feel that I almost have to get it just to put my mind at ease! I even briefly considered putting the iMac on eBay and just buying a MBP to replace it, but I love the screen real estate I get with the 20" iMac and I question if I'll be truly satisfied with a 15.4" screen FULL TIME. 17" might be better, but I doubt if I can wait until June for them to arrive. In addition, everything would connected via my wireless LAN and .Mac so file sharing should not be an issue.
Help!!!
What would you do? Sell the iMac or just get a MBP as cheap as I can?
Opinions, Please!
20" iMac Core Duo, 2GHz, 2 GB RAM, 250 GB HD, 128MB VRAM Mac OS X (10.4.4)

I love the portability my powerbook gives me. You can use a PB in your setup. You can run an external monitor for either PB or MBP. You can node. Universal Binary menas it is an application which has the components written for both PPC and Intel chips-so you don't need to do conversion. Nodes won't require you buy a nother license. so the answer is down to how much the 2 upgrades and 1 crossgrades will set you back vs how much use you'll get out of them. IMO the iMac is inexpensive (I mean that in a good way-worth hooding on to). Maybe just look at a refurb PB unless you really have the extra cash.

Intel iMac randomly relaunching Finder. RAM problem?

Several months ago I bought a new 3.06 GHz Intel iMac with 2GB of RAM. I also bought CS4 so I maxed out my RAM at 4GB with a 2x2GB RAM kit from Other World Computing.
I've noticed in the lately that everything will suddenly hang, the Dock won't appear when I cursor to the bottom, and then my desktop pic will change. I have my prefs set to choose a random one each day but this isn't happening at the right time, it's random. Not only that but if I open Dashboard after that it has to reload all of my widgets again. Plus any docked Finder or app windows pop back out to the desktop. It's like the Finder is being relaunched or something.
I'm wondering if this could be an issue with bad RAM or not having enough. With email, browser, FTP, time logger, and a few smaller apps going I can never really have more than a couple of the CS4 apps open without things getting sluggish. I try to avoid having more than 2 open at any one time. I've even dropped Photoshop's RAM usage settings from 70% to 60% to see if it makes any difference.
The problem is still happening and it seems to be happening more frequently. Things just relaunched and I went into Mail to minimize an email window. As soon as I clicked the yellow button things hanged again but not in the same way. No windows would minimize, the Dock wouldn't appear and I couldn't switch Spaces. When I went to restart, as soon as my cursor rolled over the Dock item in the Apple menu it stalled there for a short time before I was able to go down to restart. Then the restart sequence stalled and I had to force a shut down.
This is really frustrating as I was expecting a great new machine and software to replace my aging PowerMac G4 and older apps. Is there a way to test for bad RAM or does this sound like a known issue with CS4 or iMacs in general? I don't have the original 2x1GB RAM sticks any more, I sold them after installing my new RAM.
Any help would be greatly appreciated.

I've been trying a few things here and there when I've had time, giving time in between to see if the problem reoccurs. So far I've done the following:
1. Repaired Permissions. No effect.
2. Used Onyx to clean the System, User and Font cache options listed by default. It also told me that S.M.A.R.T., startup volume, Permissions and Prefs are all ok. No effect.
3. I removed the RAM, inspected the boards and the slots. Can't see any sort of damage to either. I replaced the boards but swapped slots. Both boards are firmly seated. Also no effect.
I'm going to try running 1 board at a time, swapping slots if the problem continues. If it does I'll try creating a 2nd admin account and go from there.
I've also noticed at times when the hang happens it seems to be when I click on an item in my Dock (usually a folder of items). There have also been times that after it happens I'll switch to another space and the windows for different apps will have disappeared. The apps are still open but if I try choosing the missing window under View or Window they still won't appear. Same goes with trying to use Show All under the Finder menu.

Intel iMac 20' users - any problems with noise on your firewire interfaces?

Someone please tell me that they have a quiet intel iMac 20'/Firewire interface set up, I'm having problems with a lot of digital noise from my Saffire LE & badly am hoping it's 'fixable' or just a faulty unit but more so, praying it's not noise from the iMacs Power supply that will interfere with any firewire interface I get???
I've read many posts about G5's suffering from noisy psu's which was one factor in my choosing an intel iMac & I chose the Saffire on it's great reviews for sound quality, there's no way I can work with the noise I'm getting & I'm pretty much panicking that if it IS the iMac & firewire thats the problem I'll be screwed as i only have 6 pin firewire as a useable option (really don't want to use usb2)
Incidentally, the 'budget' set up I had previously (PC & soundblaster audigy) didnt suffer from any noise like this (at least not that was even audible with the mixer levels at conversational level!) which i guess rules out any blame of this on 'mains hum/interference'?
The noise is there with the saffire's monitor output knob at any setting & with no inputs connected, it;s even worse if i power the saffire with it's external psu instead of off buss power. I'm not using a firewire hub & I've tried switching firewire leads & removing the firewire hard drive i have in the other port in case this was affecting it.
Would really appreciate hearing from anyone with similar troubles or even better anyone thats NOT having this problem with a 20' intel iMac & firewire interface so at least i know there's light (& quiet!) at the end of the tunnel
Adam
Intel iMac 20' Mac OS X (10.4.7)

funnily enough I'm going the other way, I have a rack of external modules/>sampler/fx etc & a crate of looms I've just unplugged as they've not been >turned on in so long!!!
I hear you there!
The noise is there without any inputs at all to the interface, its defiantely >digital though, its like a toned version of the sound of an old telephone >modem.
What I mean, is try disconnecting everything, drives and all. You might even disconnect the interface and crank up the iMacs volume to see if it is there. If it is, you can try the UPS and see if that takes care of it. Then add them in one at a time. All it takes is one cheap power brick in the mix to cause all kinds of trouble (if your using powered monitors, that brick too). Noisy components can actually send noise back into the source power.
I know it can be really frustrating, especially if you have noise coming from more that one source. The key is to strip everything until it is quiet and then add them back in to see where the worst is. Then come up with a plan to try to get rid of the noise.

Old ibook connected to Airport extreme on Intel iMac looses internet.

For the third time in a year since I got my new iMac Intel Core Duo machine the wireless connection between it and my old 2001 ibook (with and external USB --afterthemac.com) wireless device has lost the internet connection for the ibook. I am using the iMac as a airport base station with my iBook and it has worked flawlessly for most of the time since Feb when I got my new iBook but this is now the third time (for no apparent obvious reason to me) that while the System Preferences for the USB wireless device show a 70-75 strength connection via airport my internet (entourage email, safari browser) and wireless printing are all dead.
The last two times it happened I did a permissions fix on the iBook (nothing happened) and then reinstalled the driver for the USB wireless dongle. And I got the internet and printing through the printer on my iMac back. This did not work this time. I am set to Automatic in my Network preferences and am using use DCHP and have an ip address and such that are dynamically assigned. -- that still shows.
I have also rebooted my iMac, stopped and restarted airport on my iMac "base station" (afer a minute) and still no internet but the system preferences still show a wireless connection. I have run out of ideas to connect and wonder what else I a missing but some sites I have looked talk about the mysterious loss of inernet (while wireless appears to be working fine).
What is really weird is I also tested a Zen-Cart-MySQL server running on my localnet of my iMac and I actually got a connection of sorts by my ibook (once) today. It displayed the text portion of my Zen-Cart test screen but no graphics -- did not work next time. So it appears I almost have a connection of sorts with my iMac from my iBook but definately not an internet connection.
One final note, my new Intel iMac is connected to my cable modem via an old Netgear router (which is working fine for the iMac). I do not suspect there is any reason for this to be the problem since the ibook is using the shared connection of the iMac. But thought I would mention.
The ibook as I mentioned is the old 2001 dual USB model (white) it has only about 400 MB ram, a 10GB HD (but works great for email and web browsing for my wife). It has OS X 10.4.4, I have not bothered upgrading it any further because the HD has only about 2 GB of space free and other than this now third time of losing the internet connection it has worked fine and I hate to mess up this email/web machine my wife uses.
So if anyone has ideas of where I can go next to troubleshoot I would appreciate it.
Thanks
Russ Jacobson
[email protected]

Ok appears I solved my problem but not sure why.
While I was posting this around I stumbled on a solution so my question is why. I read somehwere about rebooting the router even thoug it is connected to the iMac and my internet works fine there. Well I rebooted that and the internet for my ibook came back instantly. So since the ibook is sharing the imac connection to my cable modem via rouer using the airport on the iMac why would the router block my iBook and not iMac that is directly wired to the old router (it is not a wireless router)
I want to learn why this now works so I can deal with it more effectively in future.
Thanks,
Russ Jacobson

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

Hold down the option key and select
 ▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

Why can't I boot from the OS X DVD on my Intel iMac?

I'm trying to boot from the Mac OS X Tiger CPU Drop in DVD that came from the Apple Refurb Store with my Intel iMac.
I have tried holding down the C key on start up and it doesn't work. It boots like normal to the hard drive
I have tried using the Start up Manager, but all it can see to boot from is my installed OS X system on the hard drive and my Windows Boot Camp partition.
The CPU Drop in DVD is all that shipped with my machine. Can one even boot with it?
My problem is Photoshop Elements refuses to start up, giving me EXCBADACCESS and KERNINVALIDADDRESS alerts. It crashes every time about half way through starting up. Trashing it's preference folder doesn't fix the problem. In fact, my Preference folder keeps filling up with folders labeled with jibberish names.
I found a discussion thread that I should boot from the original disk that came with the machine and use Disk Utilities, but I can't even boot from the DVD drive.
What step am I missing?
TIA
Kathryn

Hi knittsings!
It's only possible to boot an Intel-based iMac from a grey-labeled DVD, so if you received a black-labeled DVD, someone made a mistake packaging your refurb. The correct DVDs should have been in the smaller box with the User Guide and other small, square documents, along with the mouse and remote. If you find the grey-labeled DVDs in there, just keep the drop-in DVD, they won't need it back since they make them:)
If you don't find them in there, call Apple, or log into your account on the Store page and find your order's link for customer follow-up/issues.
Message was edited by: myhighway

Intel iMac Core Duo: iSight/iChatAV 3 Focus Problems

My dad and I have matching Intel iMac's with same RAM etc. What I am finding with iChatAV in a 1-on-1 video chat is that in the little window that shows me what I look like, my video looks awesome, yet my dad's video looks quite out of focus. He experiences the same thing on his end. He looks fine, and I am out of focus. We are both trying iGlasses as well because the iSight is just too dang dark on its own.
Now when I had my PowerBook G4, Panther, and an external iSight whenever I chatted with buddies both my video and theirs looked AWESOME. Almost like watching HDTV.
This is very strange. I am wondering if anyone else is experiencing this in iChat under the new Intel iMac's, as this is VERY unacceptable quality. I'm sure it cannot be a bandwidth issue as we both have 7Mbps downstream and 1Mbps upstream. And the quality I saw on the Keynote was much better than this.
Anyone else used both cameras and is finding this with the new Intel's?

Thank you, I had looked there and musta missed the 480Mb/s rating. So yes that is USB 2.0.
There is a article at CNet comparing the two cameras:
"In summary:
1) The external isight camera is very good (Firewire, F2.8 glass lens, auto-focus, CCD, 30 fps).
2) The internal isight is quite poor in comparison (USB, plastic lens, fixed-focus, CMOS sensor)."
I tried a few chats with other people using new iMac's today, with the same poor results. It is an inferior camera, hands down.

Apple Pro speakers with mini jack connect to new Intel iMac ?

I would like to be able to connect the pair of perspex globe Apple Pro Speakers with mini-jack that came with my PowerPC G4 Mac to my new Lion desktop Intel iMac.
However, the mini-jack is too small for either the ' audio in / optical digital audio in port ' or the ' headphone out / optical digital audio out port ' (I'm not sure which is the correct one to use !)
Is it possible with an adaptor, or by some other means, to connect them ?
If it is unfortunately not possible, any cheap alternative speakers recommended would be appreciated.

There are no adapters that are readily available to use the old Apple Pro speakers with other computers or newer Macs.
The only adapter that worked but has long been discontinued in the Griffin Technologies iFire.
These are even harder to find now and if you do, indeed find one, you're going to pay an outrageous amount of money just for an adapter that used to sell for $40!!
For the cost of this adapter, you could just buy new speakers.
The big problem with the old Apple Pro speakers is that Apple went out of its way to make sure you couldn't use these speakers with anything else but certain G4 Mac models. The connector and subsequent wiring make these speakers very proprietary and limited use without spending gobs of time altering some of the components and purchasing external computer audio amps and connectors.
Apple simply made these unusable on anything but their own hardware at that time.
It's simply not worth the effort.
Look in the Apple Store online. There are a lot of decent priced, good-looking speakers to use with your iMac.
Good hunting!

Macromedia Flash MX Professional 2004 not running on Intel iMac

SIGH. This is added to the enormous list of problems I've had with my new Intel iMac.
I'm a pro user and am confused as to why Dreamweaver MX will run but I can't get Flash MX 2004 Professional to run. It starts up, loads fonts and what not, shows a blank timeline for the new document as it should and as soon as the GUI for Flash comes up ka-boom it crashes.
Then I get the general "unexpectedly quit" notification.
Anyone else having this problem? Is Rosetta a synonym for Lucifer?
This is what the error says if it's of any use to anyone:
Date/Time: 2006-03-11 16:21:34.878 -0600
OS Version: 10.4.5 (Build 8G1454)
Report Version: 4
Command: Flash
Path: /Applications/Macromedia Flash MX 2004/Flash MX 2004/Contents/MacOS/Flash
Parent: WindowServer [58]
Rosetta: Yes
Version: 2004 (7.0)
PID: 14038
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000028
Thread 0 Crashed:
0 LaunchCFMApp 0xb808087b 0xb8000000 + 526459
1 LaunchCFMApp 0xb807b09e 0xb8000000 + 503966
2 LaunchCFMApp 0xb808f402 0xb8000000 + 586754
3 LaunchCFMApp 0xb80e46ca spinlockwrapper + 5140
Thread 1:
0 LaunchCFMApp 0xb81f2a9b strchr + 72
1 LaunchCFMApp 0xb818e1da pthreadcondwait + 3114
2 LaunchCFMApp 0xb812a660 catchexception_raise_stateidentity + 320
3 LaunchCFMApp 0xb8129b8a CallPPCFunctionAtAddressInt + 174048
4 LaunchCFMApp 0xb8129a81 CallPPCFunctionAtAddressInt + 173783
5 LaunchCFMApp 0xb812a75e catchexception_raise_stateidentity + 574
6 LaunchCFMApp 0xb81c3bbc pthread_create + 1124
Thread 2:
0 LaunchCFMApp 0xb80f7eeb spinlockwrapper + 85045
1 LaunchCFMApp 0xb8122a64 CallPPCFunctionAtAddressInt + 145082
2 LaunchCFMApp 0xb8125515 CallPPCFunctionAtAddressInt + 156011
3 LaunchCFMApp 0xb809a2e6 0xb8000000 + 631526
Thread 3:
0 LaunchCFMApp 0xb80f7eeb spinlockwrapper + 85045
1 LaunchCFMApp 0xb8122a64 CallPPCFunctionAtAddressInt + 145082
2 LaunchCFMApp 0xb8125515 CallPPCFunctionAtAddressInt + 156011
3 LaunchCFMApp 0xb809a2e6 0xb8000000 + 631526
Thread 4:
0 LaunchCFMApp 0xb80f8030 spinlockwrapper + 85370
1 LaunchCFMApp 0xb810bc0d CallPPCFunctionAtAddressInt + 51299
2 LaunchCFMApp 0xb80818b6 0xb8000000 + 530614
3 LaunchCFMApp 0xb807b09e 0xb8000000 + 503966
4 LaunchCFMApp 0xb808f402 0xb8000000 + 586754
5 LaunchCFMApp 0xb80e46ca spinlockwrapper + 5140
Thread 5:
0 LaunchCFMApp 0xb80f7d28 spinlockwrapper + 84594
1 LaunchCFMApp 0xb8110e54 CallPPCFunctionAtAddressInt + 72362
2 LaunchCFMApp 0xb80818b6 0xb8000000 + 530614
3 LaunchCFMApp 0xb807b09e 0xb8000000 + 503966
4 LaunchCFMApp 0xb808f402 0xb8000000 + 586754
5 LaunchCFMApp 0xb80e46ca spinlockwrapper + 5140
Thread 0 crashed with i386 Thread State:
eax: 0x00000003 ebx: 0xb807ae10 ecx:0x00000028 edx: 0x00000000
edi: 0x82010f80 esi: 0x00000028 ebp:0xb7fffa08 esp: 0xb7fffa00
ss: 0x0000002f efl: 0x00010246 eip:0xb808087b cs: 0x00000027
ds: 0x0000002f es: 0x0000002f fs:0x00000000 gs: 0x00000037
Binary Images Description:
0x1000 - 0x2fff LaunchCFMApp /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp

I'm on a Mac and don't had this problem. But I do watch for
video issues on this site and haven't seen this – I might
have missed a few, but most Flash users are on Windows so I think
it would be common if it were something wrong with Flash in
general.
Then again, what do I know? Because the more I'm thinking
about it the more I think I might have had this problem. But I
really can't remember. And sorry to say the solution was to not use
the import function to edit my videos.
You also might want to just see if it is the format of the
file you are importing. Perhaps a different source will work
better? I'm just grasping at straws here.
If you have many of these to do and a budget I suggest
getting a third party tool like Squeeze. Otherwise if you have some
third party editor you might want to use that.
Good luck!

Installion missing components on Intel iMac

Similar Messages

Maybe you are looking for