Installment cannot be calculated; error in repayment plan Infotype  0045

Hello Experts.
I am  getting error in IT0045
"Installment cannot be calculated; error in repayment plan"
Please give solution
Regards
Ramu

Hi Ramu
When you are getting this error? While processing salary.
Thanks
Yogesh

Similar Messages

  • "Value cannot be null" error when trying to edit or create Maintenance Plan in SQL Server 2008

    I have SQL Server 2008 installed on Windows Server 2008 64bit, every time I try to open or create a new Maintenance Plan I receive the error:
    Value cannot be null.
    Parameter name: component (System.Design)
    Program Location:
       at System.ComponentModel.Design.DesignerHost.System.ComponentModel.Design.IDesignerHost.GetDesigner(IComponent component)
       at Microsoft.DataTransformationServices.VsIntegration.DtsDesignerService.OpenDesigner(String connectionString, Object connection, String objectUrn)
       at Microsoft.SqlServer.Management.DatabaseMaintenance.MaintDesignerMenuHandler.Invoke()
    And in the Design view screen
    "Microsoft SQL Server Management Studio is unable to load this document: Could not load type 'Microsoft.SqlServer.Dts.runtime.Wrapper.IDTSPackageSigning100' from assembly 'Microsoft.SqlServer.DTSRunTimeWrap, Version=10.0.0.0, Culture=neutral'. 
    I have searched for a possible solution and have tried some suggestions of registering the msxml6.dll but and have installed VS2008 SP1 but I'm not in a position where I can do a full reinstall of SQL Server right now. Any help is appreciated. My SQL server
    environment information is below. 
    Microsoft SQL Server Management Studio
    10.0.1600.22 ((SQL_PreRelease).080709-1414 )
    Microsoft Analysis Services Client Tools
    2007.0100.1600.022 ((SQL_PreRelease).080709-1414 )
    Microsoft Data Access Components (MDAC)
    6.0.6002.18005 (lh_sp2rtm.090410-1830)
    Microsoft MSXML 3.0 4.0 5.0 6.0 
    Microsoft Internet Explorer 8.0.6001.18943
    Microsoft .NET Framework 2.0.50727.4206
    Operating System 6.0.6002

    I digged a little deeper and figured out it was a missing directory/file in %TEMP%. Seems some CleaningTool removes all files/directories in %Temp% and after that SSMS was not working any longer. The missing file is actually not needed, but the
    missing directory causes the "Value cannot be null" error.
    My missing file name was:
    C:\Users\<username>\AppData\Local\Temp\2\6vvdaozf.tmp
    But the file name changes on every startup.
    So my missing directory name was:
    C:\Users\<username>\AppData\Local\Temp\2
    After creating a empty directory with the name "2" in %TEMP% all went back to work fine for me.
    I'm not sure the directory name is every time the same, but you can discover your missing file with the process monitor from Sysinternal Tools and filters to "Process Name is ssms.exe" and "Path contains AppData\Local\Temp"
    Hope this helps other people to solve their issues too.
    Thank you!! When I run %temp% it takes me to "C:\Users\Admin ...~\AppData\Local\Temp\some random number". At first the random number was 3, after I logged off and back on it was 2. My temp variable in enviromental variables is correct. I looked on another machine
    running SQL2008 and temp is correct there. If I try to rename the numbered folder SSMS stops working. Any idea?

  • Error While creating loan repayment plan

    Hi
    While I am reating loan repayment plan after making the necessary inputs in the loan(0045) IT it is showing the following errror. We are having only the interest free loans.
    <b>Effect.int.rate cannot be calculated because no flow records exist</b>
    because of this I can not put the loan end date for the loan type.
    Pls give solution
    Regards
    Mathews

    Hi,
    I think you need to check these two points.
    1. Are you giving the End date as 31.12.9999 or the date on which the loan will have been reapid completely. You need to give the end date as the one on which the loan gets repaid.
    2. Otherwise please go to spro-payroll-your country payroll-loans-Calculation-Adjust Value Date (here give end date as 31.12.9999.
    Please try the above two points and see if it works.
    Regards,
    Imran

  • I am facing a problem while working in Muse... The issue is I cannot delete a page from my plan, when I am trying to delete it showing an error and the application shuts down. I am working on an emergency project which I got to submit it tomorrow I hope y

    I am facing a problem while working in Muse... The issue is I cannot delete a page from my plan, when I am trying to delete it showing an error and the application shuts down. I am working on an emergency project which I got to submit it tomorrow I hope you will find a solution for the same.Help with using Adobe Muse CC

    Thanks,
    I have tried with a new site it's working perfectly.
    See the screenshot of the error.
    Thanks for your support Rohit

  • Cannot install ITunes--Mesage is "Apple Application Support was not found.  Apple application Support is required to run ITunes Helper.  Please uninstall ITunes, then install ITunes again.  Error 2 (Windows Error 2)

    Cannot install ITunes--Mesage is "Apple Application Support was not found.  Apple application Support is required to run ITunes Helper.  Please uninstall ITunes, then install ITunes again.  Error 2 (Windows Error 2)

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Cannot open key error while installing itunes on windows vista 64bit

    I have downloaded iTunes to my desktop, disconnected from net, disabled firewall, and ran as administrator. Now I get an error saying: Could not open Key: UNKNOWN\Components\DA42BC89BF25F5BDOAF18C3B9B1AEE8\FD563AF386D2DE54F8388C8A8336 E1534 verify that you have sufficient access to that key or contact you support personnel. Any suggestions??? Have tried for several weeks, to get iTunes 9.0 to install & run, am very frustrated, please help!!!

    This is caused by a permissions issue with some of the apple registry keys. You need to uninstall every apple application and fix the registry permissions. I have written up the details of this below which I am sending to Apple support:
    Issues with Iphone Sync on Windows 7 64x after migration
    1) Uninstall all Apple Software components in the order recommended
    a. Itunes
    b. Quicktime
    c. Apple Software update
    d. Apple mobile device Support (Note: If this does not uninstall – It could be related to Registry permissions. Make sure to do Step 4)
    e. BonJour
    f. Apple Application Support
    2) Verify all Itunes Related components are completely uninstalled (Refer to http://support.apple.com/kb/HT1923)
    3) Try to Reinstall Itunes
    4) If you receive Error during install : Cannot Open Key: UNKNOWN Components/
    a. Get into the registry Start >> Search Programs and Files >> Regedit
    b. Access the following Location: HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Co mponents
    c. Perform the following actions
    i. Right Click on Components Folder
    ii. Select Permissions
    iii. Select Full Control and Read Permissions options
    iv. Select Advanced Button
    v. Select Owner Tab
    vi. Select to Change Owner to the Administrators
    vii. Check the option “Replace owner on subcontainers and objects”
    viii. Select OK when prompted that it may not change all.
    ix. Select Apply
    x. Select Apply again
    xi. Exit the Registry Editor
    5) Reinstall Itunes
    Good Luck
    cyn

  • Cannot install iTunes, Windows 7; error 7

    I downloaded the last iTunes update and since then, have not been able to open iTunes.  I have followed the instructions from the community posts about uninstalling iTunes and all the ancillary programs several times and still cannot open iTunes.  Each time I reinstall, I get an error message about the Apple Mobile Device Support and the install stalls.  I cannot get past it.  If I hit ignore and let the install finish, I end up with error message iTunes not installed correctly, please reinstall Error 7.
    I run Windows 7 on a Toshiba Satellite laptop.  All of my Windows updates are current.
    Please help.  I can't back up my iPhone b/c my settings are for backup on computer.  I cannot backup on cloud b/c of this.  Because I cannot backup, I have updated my software on the phone yet.
    In backup/upgrade limbo.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Error after upgrade: cannot calculate calculated key figure

    Hello Experts,
    We've recently upgraded from 3.5 to 7.0. We have still a problem we don't know how to solve regarding some queries containing some CKF with "before aggregation".
    When trying to open these queries in the new BEx 7.0 we get one warning and two errors:
    Warning:
    Time of calculation "Before Calculation" is obsolete
    Errors:
    1. Cannot calculate calculated key figure "XXXX"
    2. Query "XXXX" could not be opened.
    Searching the similar posts in this forum I've seen I could edit the queries and change before aggregation to exception aggregation and it should work in this way, but the problem is I cannot open the queries anymore.
    Have you faced a similar problem?
    Any help would be much appreciated.
    Thanks in advance.
    Inma

    Check the following notes:
    Note 1464974 - Property 'Calculation Before Aggregation'
    Note 935903 - Time of Calculation "Before Aggregation" obsolete in NW2004S
    Also refer to the same discussion here:
    Warning before aggregation is osbsolete
    Hope this helps..

  • ERROR: Install cannot verify the oracle 10g Database

    I just completed installation of the SES 10.1.8.2 version and am now trying to apply the 10.1.8.4 Service Pack. After the OUI screen asks for my sys password, I click on Next and receive a popup error message that reads,
    Install cannot verify the oracle 10g Database. Please ensure that the database and its listener are running and please verify that the information you entered is correct.
    The installer log file (installActions2010-04-15_08-56-19PM.log) shows this:
    *** Specify the SYS Password Page***
    Calling Query EmQueries4.2.2 checkUserExists
    schemaName = SYS
    schemaPassword = Protected value, not to be logged
    connectString = (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=HostNodeName_1)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=Ses01.HostNodeName_1)))
    userName = EQSYS
    Query Returned: ERROR:Exception occured while connecting to database. Please check the connection details of the database you specified and retry.
    Io exception: Got minus one from a read call
    Error:*** Alert: Install cannot verify the Oracle10g Database. Please ensure that the database and its listener are running and please verify that the information you entered is correct. ***
    User Selected: Yes/OK
    ===
    I've verified that I can login as EQSYS using sqlplus. Also tested that I can login as sys, too. I've also tested the login using the Admin console and that is fine, too.
    Any ideas on what is causing this or how to fix it is most welcome as I've not encountered this error before when installing SES or a service pack. I've even tried the OUI for Service pack 10.1.8.3 but also get the same error.
    I've checked the listener.ora and tnsnames and they are OK. I've checked and the listener is running and so is the DB.
    Right now, I have the Oracle SES instance up and running at 10.1.8.2 but need to upgrade this to the same level as the other SES search nodes.
    Edited by: user8655787 on Apr 15, 2010 2:18 PM
    My listener.log file is showing this message each time, I run the OUI and enter the sys password and click "Next"
    15-APR-2010 23:17:05 * 12502
    TNS-12502: TNS:listener received no CONNECT_DATA from client

    A couple of other things that I have tried but have had no affect. I'm still getting the same error:
    1. Tried recreating the orapwd file
    orapwd file=orapwprdses01 password=prdses01
    And make sure that the pfile or spfile has:
    remote_login_passwordfile='EXCLUSIVE'
    another OTN posting said to try this:
    1. Go to directory $ORACLE_HOME/network/admin
    2. Modify sqlnet.ora file with following parameter:
    tcp.validnode_checking = no
    3. If you don't want to disable this, you can put the machine names as follows:
    tcp.invited_nodes=(machine1, machine2)
    3. Bounce the listener.
    .... but, I'm still getting the same error when trying to run the .runInstaller OUI for the service pack for 10.1.8.4.

  • I just downloaded the newest update for mountain lion. After downloading and restarting for installation, I got a message stating that  the update cannot be installed due to an error. Yet when I check I have version 10..8.3 and safari version

    I just downloaded the newest update for mountain lion. After downloading any restarting for installation, I got a message stating that the update cannot be installed due to an error. Yet when I check I have version 10..8.3 and safari version 6.0.3, which the update was for.  Does this mean that the update is iinstalled and the message was incorrect?

    Brian Gallagher wrote:
    I just bought the Imac on Monday, which was placed on the shelf on Saturday. Its now Thursday and I have to update the machine. Heck I haven't even bought the printer or the new desk for all this stuff....ha ha.
    Good timing! Oh well, at least you shouldn't have to update again for a while. It will be nice kickstarting your Mac with the very latest System Update knowing any hiccups from 10.8.2 would have been ironed out if they were going to affect your workflow at all.
    Cheers and Happy Computing
    Pete

  • Tried to install Firefox but an error message "Extraction failed - cannot open output file" always pops up, without a reason. Why's this happening?

    Tried to install Firefox but an error message "Extraction failed - cannot open output file" always pops up, without a reason. Why's this happening?

    Try to disable your anti-virus software temporarily to see if that makes it work.
    You may need to delete the temp folder (%TEMP%) to remove the old files.

  • AHHHHHHH! Install cannot connect to database error!

    I am so frustrated with application server install...
    I'm trying to install SOA 10.1.3, advanced option, 1st option
    When it asks me for database account, host name, service name I enter all this info in then i click next...
    This is when I get the Install cannot connect to database error even though db i'm trying to connect to is on same machine!
    Anyone have any ideas other than laying off medication as to what the problem is?

    Check the requirement chapter in the Installation Guide, but it should be similar to:
    127.0.0.1               localhost.localdomain localhost
    192.168.1.88            yourserver.domain.com yourserverHowever, I don't think you should change any of this after a installation...

  • Error in BOBJ PLANNING 10.83

    Hi All,
    I am getting an error in BOBJ PLANNING 10.83
    I get the error while saving a dimensions via selecting Save from the Plan menu.
    The error states:
    Other users are calculating reports or verifying the database, please try again later.
    We confirmed that there are no other users in the system by bouncing the database server and the client machine.
    Anyone have any ideas as to why we are getting this error?
    We installed a new client and still have the old client available.
    When we perform the change on the old system the save completes without error.
    Purpose of our change is to move users to the new client but before we can we need to resolve this error.
    This is the only error holding back the change all other areas of the application are working fine.
    Is there a file that maintains state on the client that would cause this issue or a permissions issue?
    Thanks

    Please post this query to the Other Business Objects Products forum:
    SAP BusinessObjects BI Legacy Products
    That forum is monitored by qualified technicians and you will get a faster response there. Also, all the queries regarding the product remain in one place and thus can be easily searched in one place.
    Thank you for your understanding,
    Ludek

  • Flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

    flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

    I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser?  It is already installed, I just don't use it.  I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it?  If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
    Stephanie HC

  • After trying to install update on MacAir error message and then message saying panic (cpu caller 0xffffff800a859241): "Unable to find driver for this platform: \"ACPI\".... I'm worried as all of my work is on my computer and I'm afraid I will lose it all.

    I am totally worried I am going ot lose all my data after trying to install update on MacAir.  Cannot do anything error message saying panic ....."Unablet o find driver for this platform."

    Hi Guys
    No good news I'm afraid. I have been through ALL the system caches and files that were updated at the time of said issue. Reset - rebuild and even gone back to my TimeMachine copy from earlier this AM. Nothing! Can only assume it is something deeper in the /usr or var or private folders.....
    I have cloned the system and core files (/usr, /private) etc etc to an external HD and it still recreates the fault. I am afraid to say I have no more time at the minute to look at so have put my machine back to 2 hours prior via my TimeCapsule.
    I the absense of anyone else or, indeed, Apple fixing in the next 12 hours, will get back onto it from the cloned copy I have kept and see if I can find the offending file/files...
    Sorry I don't have an immedaite solution.

Maybe you are looking for