Installment source item is changed while doing the Return lot Posting

Hi Experts ,
We have a requirement to Change the Payment method for the Line item while doing any Return lot Posting(FP09) .So that we have enhanced the FQEVENT 292 to change the payment method in the line item and also configured the Lock(Payment/Dunning) for some of the Return Reason code . It is working perfectly for any item except installment line item.While doing the Return posting for any Installment line item(say 1st installment out of 4 installment) ,Lock is applied and payment method has been changed for that line item which is correct  but it is also changed the Source line item of that Installment Plan  which is not supposed to do this .not sure why SAP is taking the Source line item ? Could you please advice me what need to do for this ?
Thanks ,
Pankaj 

Hi Pankaj,
You can use BAPI ' BAPI_INSTMNTPLN_CHANGE '  to change the Installment Plan item.
Thanks,
Pratima.

Similar Messages

  • Error while doing the return delivery

    Hi Experts,
    I had created an PO with describe requirement for 50 quantity and did partial confirmation of 30 quantity.
    While doing the return delivery for 10 quantity system is throwing error
    Line 1: No goods receipt possible for purchase order 4200051444 00001
    When tried doing the same process in ECC, the return delivery is posted without error.
    We were able to do the return delivery earlier. Can anybody throw light on, for the possible reason for this error.
    Your early response is appreciated.
    Regards,
    ASGMDM

    HI,
    This is due to anyone of the following :
    01. No further confirmation expected button is checked while doing confirmation for quantity 30. Please check the same in PO, if it is checked please uncheck the same so that you can do further confirmations.
    02.Please check the confirmation status of 30 quanityt which you posted earlier. It should be having Posted in Backend. If it is not, then you cannot create return delivery for the same. Also please note that Back end GR document number for 30 quantity should be updated in the table BBP_PDBEH under the field BE_OBJECT_ID.
    Thanks
    Rajesh K

  • HT201263 While doing the restore the connect to Itunes image is still on my phone and has not shut off?  The Itunes "status" area now says "Processing File" and has said this for 15 mintues with no change. What do I do??? This is the second Restore I've a

    While doing the Restore the "connect to Itunes Image is still on my phone and has not shut off or changed since starting the REstore.  Now Itunes status bar says "Processing File" but has not changed or done anything for 15+ minutes.  What do I need to do?  Let it go or is it not working????  FYI, I tried to update to the 6.0.1 (I believe thats this update)

    This was the third Restore I've attempted today.... 'm not sure what all I did including unplugging and plugging it back in, and messing with tryign to select my phone vs. my husbands but it starting moving again.  It's now attempting to "back up" from ICloud... we'll see. Thanks

  • What is the source file structure while doing the BDC of mm01

    What is the source file structure while doing the BDC of mm01

    Hi,
    first u create a meterial note the data u enterd in the screens.
    if u have created the material successfully then that data structure will be the source structure of the
    file.
    regards.
    Jagadeesh.

  • Components Quantity Increased while doing the costing second run in 2011

    Hi,
    While doing the second costing run in same year (2011), we found there was a change in components quantity (increased) and this is not exaptable / wrong.
    dispite the fact that we did not make any change in the BOM of this SKU between the two calculations and there is no cost lot changes. There is no Price change also.
    Can any one explain, What are all the possibilities to increase the component quantities.
    Thanks in Advance
    Regards,
    Kumar

    Hi Kumar
    Check if there is % Consumption scrap in material master data and BOM item.
    I believe this is the only way you can increase consumption without changing the quantities in BOM.
    Regards.

  • Error While doing the Asset Credit Memo -ABGL

    HI,
    While doing the Asset Credit Memo -ABGL,i am getting the below error.Kindly help me with your inputs.
    Balance for transaction type group 10 negative for the area 01
    Message no. AA629
    Asset affected: 406000000004-0000
    Diagnosis
    With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
    System response
    The system rejects this posting.
    Procedure
    Check the transaction type, the amount and the fiscal year in your posting. If you want to post a credit memo to an acquisition from the previous year, then use a transaction type for a retirement. If necessary, you can change balance rules after talking with your SAP consultant.
    Thanks
    Supriya

    Check your config in OABN / OADB
    The depriciation area 01 can allow you post values only postive .. in OADB
    it has maintained Acquisition values Postive or zero values and net book
    values has miantained Postive or 0 values. so based on this setting u cannt
    post any negative values for this asset.

  • Error message while doing the Vendor Clearing

    Dear Team,
    I am encountering an issue while doing the Vendor clearing.I am nullifying the Vendor down payment against to RE document through residual posting system is showing the message like the below.
    No additional posting to asset
    Message no. AA 444
    Diagnosis
    A downpayment was already posted to the asset 80567 0 in the currently displayed document. Additional posting to the same asset in this document is not possible for technical reasons.
    Procedure
    Combine the two downpayments into one.
    Please kindly advice.The concern Down payment is showing under open item in FBL1N.Kindly advice how to proceed further.
    Thanks for the consideration.
    Regards,
    Suma.

    Hi Suma,
    First clear Down payment with using of F-54 & next you can clear normal OI.
    Rgds
    SumaMani

  • Error while doing the repository export

    hi,
    I am getting error while doing the export repository,Message: GEN-13, Additional Message: Dictionary is not available on this database, can anyone help me how to resolve this issue.
    thanks,
    Sundar M

    Hi Sundar,
    Please provide the export repository command, what you used and the log file to review.
    The error "Dictionary is not available on this database" will pop up when Siebel Repository is not present in DB.
    For export process you have to give repository name as "Siebel Repository" and it will export schema in to *.dat file.
    NOTE: Do not change Siebel Repository name for export process.
    Thanks,
    Shilpi

  • While doing the goods issue system is thruoghing an erro message no VL621

    hi ,
    actually while doing the goods issue we had put a validation if that filed(serial number) is not valid.like AVAILABLE then the system has through to an error message.but after that error message system is throughing an nother error.
    Risk of posting several mat.documents for one delivery->long text
        Message no. VL621
    Diagnosis
        Processing has been terminated because there is the risk that the system
        creates several material documents for this delivery.
    Procedure
        If this message occurs frequently, please note the exact situation and
        procedure as well as error messages and inform the system administrator.
    and we changed that error to warning also still we are getting that error message.
    how to stopthis error message.

    hi actually not for serial number check.
    there is a Z field in serial number master which is used for SIM number.
    that SIM number will be validated with available SIM number from another Z table.
    after this SIM error system is throughing this VL621 error after transaction terminated message.

  • Error in WBS element while doing the purchase requisition

    Dear All,
    While doing the purchase requisition in ps
    the error is : Item 010 WBS element IN05-PR09-16 . 04 budget exceeded.
    Kindly parovide any solution.
    Best Regards,
    Venkat.

    Hi Venkar,
    Check the available budget against WBSE - IN05-PR09-16 . 04 (S_ALR_87013558 - Budget/Actual/Commitment/Rem Plan/Assigned ), and the PR amount. Available Budget should be more than PR amount. Based on the tolerance limits set for the  budget profile, maintain the Current Budget with budget updates and try to create a PR accordingly.
    Hope this solves your problem !!
    Br
    Hari.
    Edited by: Hari Krishna Kudaravalli on Aug 20, 2009 3:25 PM

  • While doing the backup via iTune, my contacts in iPhone AND iPad have been completely wiped out. They are still all available on my Address Book on my Mac. Any idea what happened and how to resolve this ?

    While doing the backup via iTune, my contacts in iPhone AND iPad have been completely wiped out. They are still all available on my Address Book on my Mac. Any idea what happened and how to resolve this ?

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Can the case be changed while uploading the data or after uploading ????

    hi all ,
    can u pls help me ???  can the case of the data in a itab be changed while running the program? the data is uploaded to an internal table and then based on loop at that itab the conditions will evaluate to give the result.... but the problem is like wen the data is given in small letters the worste(last)  condition is executing even the data satisfies the condtion which is not supposed to happen. this is due to case sensitive problem ...can u pls help me ....can the case be changed while uploading the data r after uploading ????

    this is the itab declaration ..
    data: begin of it_input occurs 0 ,
           tra          like tstc-tcode,
         end of it_input.
    and then from the uploaded data the prog should check wheather it is having any userexits or not ...
    here comes the code...
    sort it_input by tra.
    delete adjacent duplicates from it_input  .
    loop at it_input.
               it_itab-sno = sy-tabix.
      select single * from tstc where tcode eq it_input-tra.
    if sy-subrc eq 0.
        select single devclass from tadir into v_devclass
                 where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
             if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
             move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
           if sy-subrc = 0.
            select single * from tstct where sprsl eq sy-langu and
                                            tcode eq it_input-tra.
                      if not jtab[] is initial.
               loop at jtab.
                    select single modtext from modsapt  into str
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                    it_itab-tra        = it_input-tra.
                    it_itab-i_obj_name = jtab-obj_name.
                    it_itab-i_modtext = str.
                    append it_itab.
                    str = ''.
               endloop.
              endif.
            else.
                    it_itab-tra        = it_input-tra .
                    it_itab-i_obj_name = ' '.
                    it_itab-i_modtext = 'No user Exit exists'.
                     append it_itab.
            endif.
          else.
                    it_itab-tra        = it_input-tra .
                    it_itab-i_obj_name = ' '.
                    it_itab-i_modtext = 'Transaction Code Does Not Exist'.
                     append it_itab.
          endif.
    endloop.

  • Reg: while doing the MIGO

    Hi All,
    while doing the migowith plant 2311 in the po but  i am getting the following error.
    change the plant to 2322 but my plant is 2311.
    Thanks
    siva

    hi
    check PO for which plant it was raised it may be for 2322
    While doing just enter PO number..also check whethere UR po contains single or multiple plants
    Vishal..

  • Re: While doing the MIGO

    Hi All,
    i have arise the purchase order for 20 qty and also done GR for 10 dated on 10.04.2010.
    right now i am doing the GR for remaining qty while doing the GR system taking the full value fot the qty instead of taking the partioal qty.
    The Base value also taking full value.
    For the above requirement need any customizing change or give me the valid input on this.
    Please give me the valid input on this very very urget.
    Thanks & Regards
    Siva

    Hi Siva,
    I am not sure if [note 105169 |https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=105169]and [note 45510|https://websmp203.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=45510] provide some hints regarding your issue, but can you please read them?
    Thanks and regards,
    Polly

  • OM vision India Hyderabad---exception while doing the ship confirm

    order management vision India Hyderabad ----we are getting the exception while doing the ship confirm the exceptions are shown below:
    Order: 20041 customer: C2il_customer Item: XXBikeEngine Error: NO DATA FOUND
    Order: 20041 customer: C2il_customer Item: XXBikeEngine Error: NO DATA FOUND Transactions window: Pick and ship
    Errors
    Warning: Item on delivery detail 3962489 does not have pre-specified weight and volume.
    Warning: Delivery 3773383 has null Weight
    Error: Bill of Lading Number could not be generated because the ship method code was not selected for the trip 3129358.
    Warning: Bill of Lading information could not be automatically created for delivery 3773383.
    Submitted 4 out of 4 documents for this document set. (REQ_IDS=5807692, 5807693, 5807694, 5807695)
    Warning: Failed to submit document set for delivery 3773383
    Warning: 1 deliveries will be marked as Confirmed.
    Warning: Some deliveries selected for Ship Confirm have errors or warnings.
    i am grateful if any one can provide suggestion on the issue.....

    Can you please share the documents and suggestions for R12Have you reviewed all the docs referenced above?
    actually all are working fine in normal vision operations,and we are facing the exceptions while we are doing in OM vision India Hyderabad.
    is there any setups do we configured for the OM vision India Hyderabad.if you can share any information on that it will be helpful...If the docs referenced above and Oracle Documentation http://download.oracle.com/docs/cd/B53825_08/current/html/docset.html do not help, then I would suggest you log a SR.
    Thanks,
    Hussein

Maybe you are looking for

  • Can't release layer in PS CS5

    I found a bug where every now and then when I'm dragging a layer around where it won't drop back into the layers menu, it's stuck on the cursor and won't realse, I end up having to quit photoshop. I've tried hitting the escape key but it won't diseng

  • Communication set up between two clients

    All, I am trying to set up distributed WM using SAP R/3 systems. For this i have choosen client 805 (Central ERP R/3) and client 800 as decentralized WM system which is also R/3. i have completed the configuration for decetral-WM both in Central and

  • Dvacore.dll error between CP5.5 and PS5.1 using colour picker

    Hi all. If I have CP 5.5 (or 5) open at the same time as PS5.1 (not sure about other versions) and I use the colour picker (eye dropper) in CP, all is fine until I move the mouse icon onto the live PS window when I get the following error. Has anyone

  • Recurring Appointments in Outlook

    Hi There, iPhone 3G connected to UK 02 Network - v2.02 Firmware I have recurring appointments in Outlook which occur 3rd Tuesday in each month. Occasionally, these conflict with other meetings so we move them to later in the day. When I do this, it m

  • Pass Select-option as FunctioModule parameter ?

    Hi experts, I need to pass the Select-option parameter as import of a function module. How can i do that? Regards Dhanya