Installtion from discs not working

I replaced my laptop with a desktop and I am trying to install Adobe Premiere Elements 10 from my discs,
I keep getting an Error 1303. The installer has insufficient privileges to access this directory: C:\Program Files (x86)\Adobe\Photoshop Elements 10. The installation cannot continue. Log on as an administrator...
I am the administrator and the only user of my computer! I am using Windows 7

Better check on wf forum or General EBS Discussion
--Shiv

Similar Messages

Windows 8 Recovery Disc not working

Hi everbody,
I have purchased a Lenovo Thinkpad T430.
This laptop came with pre-installed Windows 7 Pro.
However I want to use Windows 8 which I have a recovery disc for.
I built in a SSD instead of the optical drive. So I don´t have a optical drive.
On this SSD I want to run my OS.
With a software from Samsung (manufacturer of my SSD) I was able to copy the Windows7 OS on my SSD.
As I mentioned above I bought a laptop with installed windows 7 pro and a Windows 8 upgrade disc.
Therefore I got the "Operating System Recovery Dis Windows 8 Pro. (OEM Activation 3.0 Required)".
The problem now is that I have an upgrade disc but no optical drive.
So I created an image of the upgrade disc and with this image I have created a bootable USB stick with the following program:
http://www.chip.de/downloads/UNetbootin_34673960.html
When I boot my laptop using the bootable USB stick everything seems to be working until to the point where I have to accept the EULA.
So I chose a language, and clicked on "I accept the agreements".
When I want to click on "next" I got a error message "recovery failed".
Please have a look on the following picture taken with my smartphone.
The language used in this picture is german as i live in Austria.
Link to image
Do you know how I can upgrade to Windows 8?
Can you tell me why the upgrade disc is not working?
Best Regards,
Philipp Stöger
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation Rules
Solved!
Go to Solution.

Dear Phisto, from your description i cannot tell you anything more about the disk apart from the obvious, that it seems to be incomplete without the other 11 disks of the set. Did you buy this disk from Lenovo, from Microsoft, or is it something that came from unofficial channels? If it is the latter maybe you should not try to install it...
Now for cloning the SSD back to your HDD. The software that came with your Samsund should be able to do that as well. If not, then if your HDD is a Western Digital you can download and use Acronis WD edition from WD's site, it's free and will do the cloning. Otherwise you should use a free tool, Clonezilla is one of them and of course there are more.
As for the location of your various drives, I would suggest to keep things really really basic if you want to troubleshoot effectively, so the best thing would be to return the system to a "factory" condition, of course with the SSD in place of the HDD. You don't know which parameter is causing you trouble at this point. So, of course it would be easier to use an external DVD drive (and you should try it!), butif it fails as well you should try also the other approach.
I hope you solve this.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

HP Pavilion g4, reinstall Win7 64bit fm a DVD disc, not work

I try to fix a problem for my friend's laptop. It is HP Pavilion G4
running Win 7 64bit OS. The laptop can not start up the windows. I
press ESC to pause the start up, and run system recovery, it shows BIOS
setup, system recovery and others, I then press Fn + 11 key to run
system recovery, but it never runs.
I then remove the HDD, and connect to my computer to run testing. It
seems it has something inside corrupted. It takes so long to recognize
all partitions. I decide to format all partitions and then resize
them. Afterwards, I run test and chkdsk. Everything is fine with the
HDD now. I put the HDD back to Laptop, and insert a DVD disc of Win
7, the laptop does not start from DVD. The screen shows as follows:
Hard Disk Error
Please run the Hard Disk Test in System Diagnostics.
Hard Disk 1 (3F1)
F2 System Diagnostics
I visit the above link, I could not find relevant materials.
If I press ESC to exit start up. I can hear the DVD ROM is running,
but still not work. The screen shows as follows:
Startup Menu
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
Enter - Continue Start up
Only F1 would respond when I press. Other Fn does not respond at all.
Do you have clue and suggestion for me ?

You do not use Fn + the key indicated.For instance to enter BIOS you simply tap F10. Recovery would have been F11, not Fn + F11.
You can order Recovery Media from HP for a small fee>> Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

"Old" update rule from ODS not working

Hi Gurus,
I need to set up the "old" fashioned update rule to load data from an ODS1 to another ODS2.
The thing is that I need to set up an update rule because I need to implement a Return Table Routine that is not supported (as far as I know) by the new Transformation/DTP.
When I select option (through the right mouse click over ODS1) "Other Options" - "Create Update Rule" it takes me out of the RSA1 and leaves me in the main menu making it impossible to create a new update rule.
The strange thing is that I have this working from and ODS to an InfoCube.....
Suggestions, a workaround??
Andrea.

Hi Jerry,
Just to confirm that this is not working. The tys_TG_1 structure only shows me the target infoprovider structure. Check that in the how to, to be able to derive employee first you need to assign eache source_filed to the result_field leaving employee blank.
I need to have in the same place, the source_field structure (source infoprovider field structure) and the result_field structure (target infoprovider structure). That is what the "old" return table gives me as in the same place I can have the communication_structure (source infoprovider field structure) with the return_table structure (target infoprovider structure).
Just to understand, in the source infoprovider I have 12 Key Figures (1 for each period) and I have to split each incoming record to 12 records. If I work only with the result_field structure tys_TG_1 and the result_package tyt_TG_1 I'm not able the see those 12 KF.
So... return table functionality is not fully supported by BW 7 as far as I know.
Any other ideas why I'm not able to create the old Update Rules from an ODS?
Regards,
Andrea.

Can only add music with Autofill from Library (not working with playlists)

I can only add music using the Autofill feature and it will only work when the main music library is selected. Autofill does not work when a playlist is selected and I can not add music directly by dragging songs from a library or playlist as described in the owner's manual.
Is there something wrong with iTunes, the iPod or is this user error?

Hi Steve,
You're right it's the same for me.
I don't know as you mentionned whether it is an user error or not but I've got 2 iPods now, one is 60 Go color display (60Go) and the other received yesterday is 2G iPod Shuffle (Clipod). I can't drag songs from 60Go nor to iTunes Library neither to Clipod Music. The autofill function works only from iTunes Library where I've got 5 songs only (new MacPro), somebody knows how to export 60Go music to iTunes Library ?
Thanks,
Peloche
MacPro 2.66, 6GB, 1.7TB; Mini G4, 1.45, 1GB;iPod 60 GB; 30" & 20" ACD; Apple IIC Mac OS X (10.4.8) X1900XT

Boot disc not working on new hard drive

I have a Macbook Pro 5,5. My harddrive went bad and I replaced it with a new 500 HDD harddrive. When I put in my Mac OS X Install Disc 1 (Mac OS Version 10.4.10) and hold down the "C" key after the chime, all I get is the same white screen that initially starts up when I turn it on. The folder with a question mark doesnt show up (if I restart computer without install disc I will get the folder with question mark flashing however), and the disc drive will allow me to eject it fine if I restart and hold down the mouse, so I dont think it is the optical drive. Thoughts on whats going on?

Solution:
1. System Preferences > Spotlight > Privacy
2. Drag and drop or add your external hard drive in the Privacy window. This will reset the old preference.
3. Then remove the external hard and close the System Preferences.
4. Wait for 30 seconds. Spotlight will start indexing of your external hard drive.
Update: It's supposed to scan for 8 hours but it took only 15 minutes and stopped. I tested the search and it's still not working. It's strange that it works on my other two external hard drives (USB and Firewire) but not this particular one (USB). I have three external hard drives.

Why is my symbol loaded dynamically from library not working?

Hope someone could help,
The code in "Example1" work fine if the video symbol is located on the stage. But what I'm trying to do is load the video symbol from the library dynamically and that doesn't work as illustrated in "Example2".
My question is why does Example1 work and Example2 not work?
Example1:
var youtube = $("<iframe/>");
sym.$("video").append(youtube);
youtube.attr('type', 'text/html');
youtube.attr('width', '560');
youtube.attr('height', '315');
youtube.attr('src', 'https://www.youtube.com/embed/A3PDXmYoF5U');
youtube.attr('frameborder','0');
youtube.attr('allowfullscreen', '0');
Example2:
sym.myVideo;
sym.myVideo = sym.createChildSymbol("video", "Stage");
var youtube = $("<iframe/>");
sym.$("myVideo").append(youtube);
youtube.attr('type', 'text/html');
youtube.attr('width', '560');
youtube.attr('height', '315');
youtube.attr('src', 'https://www.youtube.com/embed/A3PDXmYoF5U');
youtube.attr('frameborder','0');
youtube.attr('allowfullscreen', '0');
Thanks in advanced,
-Angel

Have you tried a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

"Automatically retrieve CD track names from internet" not working

I'm about to begin re-ripping all my CDs (400+) which I haven't done since at least 14yrs ago in order to take advantage on newer/better formats. I was excited to see that iTunes can automate a lot of this process with the following two options:
- When you insert a CD: (Import CD and Eject)
- [ ] Automatically retrieve CD track names from internet
Found in the "Playback" settings of iTunes 10.1.1
However after inserting my first CD, I noticed it started to import without downloading the track names first. Obtaining track names manually is working for me because if I choose "Advanced -> Get track names" it accesses Gracenote DB and works fine.
It's just the automatic operation after inserting a CD that is not working. This causes me to have to:
1) Insert CD
2) Choose "Advanced -> Get track names"
3) Click "Import CD"
4) Eject
as opposed to the one supposedly promised step of "Insert CD" and have the other 3 things happen automatically.
I've tried deleting my iTunes plists in my ~/Library/Preferences/ folder but it still works the same.
Any suggestions?

You can seach the Gracenote site directly. I don't know if that would help you decide which option you needed to use.
http://www.gracenote.com/music/index_old.html

RDP from internet not working in Hyper-v VMs

Hello .
Sorry for my english .I hope to explain clearly my problem .
I 've Hyper-v on Windows 2008 server r2 . I've 3 Virtual networks ( External , Private and internal ) .
In my VMs there are two domains . The first one is bound with internal Vn and the second is bound with private Vn. My Host RRAS is configured to switch inbound connection RDP (3389) to a second RRAS (Virtual machine bound with private network) . Last
RRAS does port forwarding correctly to the machine for RDP connection ( port 3389) request .
RDP works only from host and VMs but not from internet in private vn.
RDP from internet connects but when try to configure session disconnects . Any ideas ?
Netstat says "SYN-RECEIVED" then disconnects .
All other services work fine (http mapped between RRAS host and RRAS vm i) and RDP works in private virtual network from internet . I think the problem is nat over nat for port 3389 in internet connection . I've tried to disable firewall but
not works .
Thanks

Also add firewall exception "from" any or specific ip "inbound" "to" whichever destination.
To truly test, you ca disable firewall, if it allows rdp session, then you know it is something with firewall.
Remember sometimes antivirus software includes firewall., and in the case of home routers, they have built-in firewall, and Windows also has firewall, so you must be sure to check ALL possible locations of firewall blocking and dropping (even server-to-server).
Basically you would be allowing inbound from your router, NATted through (or routed through) your network, to the destination or allowing inbound from server to server. Also
double check that your server NICs are not having any additional 2nd DHCP interfaces, if so, disable the secondary DHCP NIC and test again. And do:
traceroute
From Internet to the server having the issue and from server to server and it may uncover more details of where things are getting dropped.
I have heard also some ISPs may also try to block inbound RDP or 3389, so be sure and verify that as well.
Please mark as answer if I helped solve your issue. Thank you.
tnjman

Notifications from Mail not working in iCal

Notifications from Mail are not working. I have set the proper setting in both iCal and Mail with no luck. .ICS files show up in Mail when I search but they don't populate of show in the Notifications window in iCal.

The same problem here. It used to work for a while. But after the last update it stopped working.
if I get an e-mail reply to an event, it does not update the attendee list.
i figured out though, that if you drag the .ics file onto iCal window (events part), the attendee status is updated and event is marked as done, but there is still a question mark in the upper part of the event.
obviously a bug.

Drag and drop from Aperture not working?

This sounds like a pretty stupid issue but... when I attempt to drag & drop an image from Aperture (to anywhere, e.g. desktop, iweb, mail) it usually doesn't let me. Some photos will drag out but most won't (Two pictures of the identical format and size - one will let me drag&drop it and the other won't), and the export feature takes forever. I tried making sure that aperture is maintaining the previews and that the file to export is half size but still not working... any ideas?

Not stupid at all. That's a feature I use all the time and I'd be pretty PO'd if it wasn't working.
Your profile doesn't indicate whether you're running Aperture 3.x or not. Did the problem appear after an update or has it always been that way on your installation?
-Steve

Iphoto remove photos from iphone not working

For the past couple months iphoto will not delete the photos from my iphone. It successfully imports them, prompts to delete, appears to delete but doesn't actually remove them. They are still on my iphone. iphoto recognizes that they have already been imported and asks to delete them again the next time I plug in my phone, I accept, looks like something is happening but they are still there. I've tried image capture as well and there is no way to delete off the phone in image capture. Help!?

Can it be, that you have enabled iCloud Photo Library (Beta) on your iPhone with iOS 8.1.3? Then you can import photos from the phone, but deleting from Image Capture or iPhoto will not work, if the photos are in iCloud Photo Library.
iCloud Photo Library beta FAQ
Delete the photos directly on the iPhone or using the icloud webpage -
Use the "Photos Beta" app on your iCloud page:
https://www.icloud.com

Brbackup from DB13 not working

Dear experts,
For the past one week suddenly my Offline backup from DB13 has stopped working. I havent change anything on my SAP server or Oracle but its not working.
First I checked DB13 logs. Last messages it is giving me is like as follows
=====================================================
BR148I DBVERIFY will be used for verification
BR134I Unattended mode with 'force' active - no operator confirmation allowed
BR370I Directory /oracle/CYP/sapbackup/bdvklqkj created
BR202I Saving init_ora
BR203I to /oracle/CYP/sapbackup/CYP ...
BR202I Saving /oracle/CYP/920_64/dbs/initCYP.sap
BR203I to /oracle/CYP/sapbackup/CYP ...
BR280I Time stamp 2007-06-05 03.00.07
BR198I Profiles saved successfully
BR280I Time stamp 2007-06-05 03.00.07
BR307I Shutting down database instance CYP ...
=============================================
when I checked my previous DB13 successful logs I saw that next message is
Shutdown of database instance CYP successful
Obviously it gave me idea that might be database was not closing out successfully. then I checked and compared my oracle alert logs but havent found very obvious changes their. Please check below messages of alert log. First set of messages are of successful backup and next set is of my recently failed backup
===================================================
ALTER DATABASE CLOSE NORMAL
Wed May 9 01:00:59 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Wed May 9 01:00:59 2007
Shutting down archive processes
Archiving is disabled
Wed May 9 01:00:59 2007
ARCH shutting down
Wed May 9 01:00:59 2007
ARCH shutting down
Wed May 9 01:00:59 2007
ARC0: Archival stopped
Wed May 9 01:00:59 2007
ARC1: Archival stopped
Wed May 9 01:01:00 2007
Thread 1 closed at log sequence 2209
Successful close of redo thread 1
Wed May 9 01:01:00 2007
Completed: ALTER DATABASE CLOSE NORMAL
Wed May 9 01:01:00 2007
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archiving is disabled
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archiving is disabled
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ALTER DATABASE CLOSE NORMAL
Tue Jun 5 03:00:42 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Tue Jun 5 03:00:43 2007
Shutting down archive processes
Archiving is disabled
Tue Jun 5 03:00:43 2007
ARCH shutting down
Tue Jun 5 03:00:43 2007
ARCH shutting down
ARC1: Archival stopped
Tue Jun 5 03:00:43 2007
ARC0: Archival stopped
Tue Jun 5 03:00:43 2007
Thread 1 closed at log sequence 2254
Successful close of redo thread 1
Tue Jun 5 03:00:43 2007
Completed: ALTER DATABASE CLOSE NORMAL
Tue Jun 5 03:00:43 2007
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archiving is disabled
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
======================================================
I used to schedule backup at 3 AM but when I came to office next morning my oracle instacne was in idle mode. I checked ps -ef OS command and saw process of brbackup was still there and not a single byte had been taken as backup.
Please help me if you have any clue.
Best Regards
Waqas

which log do you want
backCYP.log
or
bdvklqkj.afd log ( this is same is db13 logs)
backCYP.log is showing following
=======================================
bdvfimya afd 2007-05-09 01.00.48 2007-05-09 01.57.18 1 ...............     2
5    25     0      2209       2028063485     2209       2028063485 ALL
offline_force   disk             -
c 6.20 (113)
bdvjrtwh afd 2007-06-01 02.00.23 0000-00-00 00.00.00 6 ...............     2
5     0     0      2248       2104067221        0                0 ALL
offline_force   disk             -
c 6.20 (113)
bdvklqkj afd 2007-06-05 03.00.05 0000-00-00 00.00.00 6 ...............     2
5     0     0      2254       2114123006        0                0 ALL
offline_force   disk             -
dc 6.20 (113)
===================================
Regards

Select in FROM clause not working

Hello,
I have three tables with one table containing the name of the other two tables and i want to select dynamically the two selects based on their ID that matches in the first table.
CREATE TABLE_NAMES (ID NUMBER, TableName VARCHAR(2) )
CREATE TRADE (activites VARCHAR(2), TRADE_ID )
CREATE CONTRACT(activites VARCHAR(2), TRADE_ID )
INSERT INTO TABLE_NAMES ( 101, 'TRADE' );
INSERT INTO TABLE_NAMES ( 202, 'CONTRACT' );
INSERT INTO TRADE ('TRADE 1' , 101 )
INSERT INTO CONTRACT ('CONTRACT 1' , 202 )
What I wanted to do is select the table name dynamically based up on the id in TABLE_NAMES
and I failed when doing this
SELECT SELECTED_TABLE.activites FROM ( SELECT TABLE_NAME FROM TABLE_NAMES WHERE ID = 101 ) SELECTED_TABLE
OR a more generic form with JOIN statement also did not work
SELECT SELECTED_TABLE.activities FROM TABLE_NAMES SELECTION JOIN ( SELECT TABLE_NAME FROM TABLE_NAMES) SELECTED_TABLE
ON SELECTION.ID = SELECTED_TABLE.TRADE_ID
Thanks in advance

What you are trying to do will not work. To accomplish your requirement you would have to use dynamic SQL.
However, I want to stress that this is probably not a good design decision because:
1. Maintainability of the code may be jeopardized
2. Dynamic SQL could be laden with SQL injection vulnerabilities
3. Dynamic SQL generally does not perform as well as static SQL.
HTH!

Frame access from servlet not working

Dear all,
I am running my servlets on Tomcat 5.5 and using JDK 1.6. I have a small program that uses codecs to access frames from a video file. PreAccessCodec implements Codec interface and PostAccessCodec extends PreAccessCodec. I set the two codecs into the processor's codec chain. The program is implemented as a thread and once started grabs frames and stores the images in a certain interval. The problem is this: whenever I start the thread from a main program, everything runs without a glitch. However, when I put the code in init() method of the servlet, I get the following error message:
The input format is not compatible with the given codec plugin: com.mapper.utils.PostAccessCodec@69d02b
Failed to realize: com.sun.media.ProcessEngine@1478a43
Cannot build a flow graph with the customized options:
    Unable to add customed codecs:
      com.mapper.utils.PreAccessCodec@15356d5
      com.mapper.utils.PostAccessCodec@69d02b
Error: Unable to realize com.sun.media.ProcessEngine@1478a43 I am using netbeans 5.5.1 to deploy my servlets. I doubt that the problem is with classpaths because the servlet doesn't complain when I am using JMF's classes like Processor.
I would really appreciate any help.
Thank you.
Message was edited by:
calculemus

The GE.iH() method should return false for
a ..head-full ..en-headed, not headless
environment, and I expect (from what you
reported above) that will return false for both
your servlet and application, and is apparently
not the problem.It returned false when I tried GE, and it was not the problem as you suggested. However, I now noticed in the logs:
java.awt.HeadlessException
I use Netbeans for the development, and I tried using -Dheadless=true and -Dheadless=false, it did not change anything...
I think it is time to check that assumption
more carefully.
My impression is that PreAccessCodec and
it's 'Post' equivalent are mentioned a lot in JMF
example code, but are custom classes,
built to suit the use at the time. Did you write the
Pre/PostAccessCodecs for this app.?Yes I customized them from the JMF sample codes. They are in the classpaths and are correctly read by the servlet. I did some logging and I actually saw that the code inside Pre/PostAccess was logging when my servlet was run.
>
So, what I am thinking, is that while the JMF
based Processor class may well be on the
server's
classpath, perhaps Pre/PostAccessCodec classes
are not.
oes a jar appear in the WEB-INF/lib directory,
that contains the Pre/PostAccessCodec.class?
Failing that, are the classes themselves in
WEB-INF/classes/(sub-dir according to package name)/ ?Nevertheless, just to double check I checked WEB-INF directory and the classes appear correctly in their appropriate 'package-folders'.
I figured out where exactly the thread was not running. In my PostAccessCodec class, I had overloaded getSupportedInputFormats() function to return RGB format.
public Format [] getSupportedInputFormats() {
Format [] fomats = {new RGBFormat()};
return fomrats;
When I changed it to return {VideoFormat()}, the codec initializes, but I get nothing when I want to access the frame.
I guess I will have to start another thread.
@moderators, please move the post if it is inappropriate to put it in this thread, my apologies.
The problem is still there and I am not able to get the frame access not working from the servlet. :(
Message was edited by:
calculemus
Message was edited by:
calculemus

Installtion from discs not working

Similar Messages

Maybe you are looking for