Installtion of ARES 7.0 for weblogic 9.2 in Solaris 10

hi friends,
while trying to install ARES in weblogic with OS as Solaris,
i'm facing the error as "The installer is unable to run in graphical mode. Try running the installer with the -console or -silent flag"
help me out...........
thanks in advance..
RKanth

In short, go to [https://support.bea.com] , register yourself, and create a support case. For more detail, read James Bayer's one-page summary of how to use the BEA support site: [http://blogs.oracle.com/jamesbayer/WebLogicSupportQuickReferenceGuide.doc]

Similar Messages

  • Support for JRockit for WebLogic 10.3 in Solaris x86

    Hi All,
    I am trying to install JRockit Mission Control 3.1.2 in a Solaris 10 x86 platform.
    For Solaris Spark I know there is a special distribution.. For Solaris 10 x86 I am trying to install the generic linux version.
    When I try to install the jrmc-3.1.2-1.6.0-linux-ia32.bin I get the following error:
    jrmc-3.1.2-1.6.0: Cannot find /lib/ld-linux.so.2
    I also try with 64bit edition of the jrockit mission Control but I get a similar error but trying to find the /lib64/ld-linux.so.2.
    Is Solaris 10 x86 supported? Or at least, is there a workaround to install it?
    I find some site talking about JRockit for Solaris Spark, but seems to me that Solaris x86 is not supported...
    Thanks in advance
    Pablo

    Hi,
    The DTD used in "web.xml" should not cause any issue ...though it's the OLD "web.xml"...Please try to run the Following command to Generate the New Deployment Descriptors from the Existing Application:
    Step1). Open a Command Window and Run "setWLSEnv.sh" or "setWLSEnv.cmd".
    Step2). In the Command Prompt move to the Current Directory where you have placed your Application and then Run the Following Command
    java weblogic.DDConverter  -d NewDDs  jamagent.war
    Here Above Command Will read the "jamagent.war" War archive and then It will generate the New DDs in "NewDDs" directory...Which we need to replace with the OLD DDs present in our WebApplication..
    Thanks
    Jay SenSharma
    http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

  • Site Minder Web Agent for Weblogic 6.1

    Hello,
    I am installing Netegrity Peoplesoft connector for Weblogic 6.1 on Solaris. For this as a prequisite I need to install a Site Minder Web Agent for Weblogic 6.1. Can anyone tell me from where I can download this ? appreciate your help

    You need to contact Netegrity Sales representative and register for an evaluation.
    KBL
    Sreekumar <[email protected]> wrote:
    Hello,
    I am installing Netegrity Peoplesoft connector for Weblogic 6.1 on Solaris.
    For this as a prequisite I need to install a Site Minder Web Agent for
    Weblogic 6.1. Can anyone tell me from where I can download this ? appreciate
    your help

  • Are there different licensing schemes for WebLogic Server?

    Is there different licensing schemes for WebLogic server?
    For example,
    Is there a licensing scheme to purchase a runtime WLS license so we can run only ADF and BIP?
    Is there a licensing scheme to purchase a runtime WLS license so we can run only ADF and Oracle Reports?
    Edited by: 957072 on Jan 28, 2013 5:43 AM

    Please go through below metalink id for weblogic licensing.
    Master Note on WebLogic Server (WLS) Licensing and License Files [ID 1076283.1]
    Thanks,
    Kishore

  • BPM for Weblogic configuration is failed

    1, I install BPM for Weblogic.
    2, I create a domain for weblogic using config tool and start it.
    3, I create a new directory.
    However, the configuration is failed.
    The BPM for weblogic is installed in XP and the window of selecting JDK is not pop out.
    The log is as follows:
    For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your
    changes once you are done. creating mbean of type JMSServer ... creating mbean of type JMSSystemResource ... creating mbean of type SubDeployment ... creating mbean of type Queue ... creating mbean of type Topic ... creating mbean of type ConnectionFactory ... creating mbean of type ConnectionFactory ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... setting attributes for mbean type JMSServer setting attributes for mbean type JMSSystemResource setting attributes for mbean type SubDeployment setting attributes for mbean type Queue setting attributes for mbean type Topic setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCXAParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty Saving all your changes ... Saved all your changes successfully. Your edit session is not stopped, you can continue your edits. Activating all your changes, this may take a while ...
    The edit lock associated with this edit session is released
    once the activation is completed. Activation completed Creating a user ... Created user successfully Deploying application from E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:44 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer archive: E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear, to examplesServer .> .Completed the deployment of Application with status completed Current Status of your Deployment: Deployment command type: deploy Deployment State : completed Deployment Message : no message Deploying application from E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:54 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine3 archive: E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear, to examplesServer .> Failed to deploy the application with status failed Current Status of your Deployment: Deployment command type: deploy Deployment State : failed Deployment Message : java.lang.OutOfMemoryError: Java heap space No stack trace available. This Exception occurred at Wed Jul 15 12:12:17 CST 2009. weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed. at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48) at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185) at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536) at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160) at org.python.core.PyMethod.__call__(PyMethod.java:96) at org.python.core.PyObject.__call__(PyObject.java:248) at org.python.core.PyObject.invoke(PyObject.java:2016) at org.python.pycode._pyx17.deploy$8(<iostream>:223) at org.python.pycode._pyx17.call_function(<iostream>) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:404) at org.python.core.PyFunction.__call__(PyFunction.java:184) at org.python.pycode._pyx16.deploy_Applications$61(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:623) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:256) at org.python.core.PyFunction.__call__(PyFunction.java:169) at org.python.pycode._pyx16.f$0(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:738) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyCode.call(PyCode.java:14) at org.python.core.Py.runCode(Py.java:1135) at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167) at weblogic.management.scripting.WLST.main(WLST.java:129) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at weblogic.WLST.main(WLST.java:29)
    Exiting WebLogic Scripting Tool.
    <Jul 15, 2009 12:12:17 PM CST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.> QuestionConfirm Action
    Do you want to cancel this wizard?

    Hi,
    Thanks for your reply. I change the file and reconfigure the BPM for weblogic. However, it is still failed in 70-72%.
    -------------------log message-------------------------------
    TO_MSG PATH=/root/bea/wlserver_10.3/server/bin:/root/bea/modules/org.apache.ant_1.6.5/bin:/root/bea/jrockit_160_05/jre/bin:/root/bea/jrockit_160_05/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
    TO_MSG
    TO_MSG Your environment has been set.
    TO_MSG
    TO_MSG CLASSPATH=/root/bea/patch_wlw1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/jrockit_160_05/lib/tools.jar:/root/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/root/bea/wlserver_10.3/server/lib/weblogic.jar:/root/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/root/bea/wlserver_10.3/server/lib/webservices.jar:/root/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/root/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:/root/OraBPMwlHome/lib/fuego.boot.jar:/root/OraBPMwlHome/bin/./:/root/OraBPMwlHome/bin/./lax.jar::/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbembedded57.jar:/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbtools57.jar:/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar
    TO_MSG
    TO_MSG Initializing WebLogic Scripting Tool (WLST) ...
    TO_MSG
    TO_MSG Welcome to WebLogic Server Administration Scripting Shell
    TO_MSG
    TO_MSG Type help() for help on available commands
    TO_MSG
    TO_MSG Starting server BPMServer
    TO_MSG Please see the server log files for startup messages available at /root/weblogic3/bpm
    TO_MSG Starting weblogic server ...
    TO_MSG WLST-WLS-1249792014056: [WARN ] -XX:MaxPermSize=256m is not a valid VM option. Ignoring
    TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ26￥ﾈﾆ58￧ﾧﾒ CST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.0-50_o-100423-1.6.0_05-20080626-2104-linux-ia32 from BEA Systems, Inc.>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ00￧ﾧﾒ CST> <Info> <Management> <BEA-140013> </root/weblogic3/bpm/config/config.xml not found>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ00￧ﾧﾒ CST> <Info> <Management> <BEA-141254> <Generating new domain directory in /root/weblogic3/bpm>
    TO_MSG .....WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ12￧ﾧﾒ CST> <Info> <Management> <BEA-141255> <Domain generation completed in 12,326 milliseconds.>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ13￧ﾧﾒ CST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
    TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ15￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ15￧ﾧﾒ CST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ16￧ﾧﾒ CST> <Notice> <Log Management> <BEA-170019> <The server log file /root/weblogic3/bpm/servers/BPMServer/logs/BPMServer.log is opened. All server side log events will be written to this file.>
    TO_MSG ...WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ24￧ﾧﾒ CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    TO_MSG ....WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ34￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ34￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ34￧ﾧﾒ CST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ35￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ35￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ35￧ﾧﾒ CST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ35￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "BPMServer" for domain "bpm" running in Development Mode>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ36￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ36￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    TO_MSG Server started successfully.
    TO_MSG Started Server. Trying to connect to the server ...
    TO_MSG Connecting to t3://localhost.localdomain:7001 with userid weblogic ...
    TO_MSG Successfully connected to Admin Server 'BPMServer' that belongs to domain 'bpm'.
    TO_MSG
    TO_MSG Warning: An insecure protocol was used to connect to the
    TO_MSG server. To ensure on-the-wire security, the SSL port or
    TO_MSG Admin port should be used instead.
    TO_MSG
    TO_MSG Location changed to edit tree. This is a writable tree with
    TO_MSG DomainMBean as the root. To make changes you will need to start
    TO_MSG an edit session via startEdit().
    TO_MSG
    TO_MSG For more help, use help(edit)
    TO_MSG
    TO_MSG Starting an edit session ...
    TO_MSG Started edit session, please be sure to save and activate your
    TO_MSG changes once you are done.
    TO_MSG creating mbean of type JMSServer ...
    TO_MSG creating mbean of type JMSSystemResource ...
    TO_MSG creating mbean of type SubDeployment ...
    TO_MSG creating mbean of type Queue ...
    TO_MSG creating mbean of type Topic ...
    TO_MSG creating mbean of type ConnectionFactory ...
    TO_MSG creating mbean of type ConnectionFactory ...
    TO_MSG creating mbean of type Server ...
    TO_MSG creating mbean of type JDBCSystemResource ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type JDBCSystemResource ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type Property ...
    TO_MSG creating mbean of type Realm ...
    TO_MSG creating mbean of type RoleMapper ...
    TO_MSG creating mbean of type CredentialMapper ...
    TO_MSG creating mbean of type CertPathProvider ...
    TO_MSG creating mbean of type Authorizer ...
    TO_MSG creating mbean of type Adjudicator ...
    TO_MSG creating mbean of type AuthenticationProvider ...
    TO_MSG creating mbean of type AuthenticationProvider ...
    TO_MSG setting attributes for mbean type JMSServer
    TO_MSG setting attributes for mbean type JMSSystemResource
    TO_MSG setting attributes for mbean type SubDeployment
    TO_MSG setting attributes for mbean type Queue
    TO_MSG setting attributes for mbean type Topic
    TO_MSG setting attributes for mbean type JMSConnectionFactory
    TO_MSG setting attributes for mbean type JMSConnectionFactory
    TO_MSG setting attributes for mbean type Server
    TO_MSG setting attributes for mbean type JDBCSystemResource
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG setting attributes for mbean type JDBCConnectionPoolParams
    TO_MSG setting attributes for mbean type JDBCDriverParams
    TO_MSG setting attributes for mbean type JDBCDataSource
    TO_MSG setting attributes for mbean type DefaultIdentityAsserter
    TO_MSG setting attributes for mbean type SecurityConfiguration
    TO_MSG setting attributes for mbean type SecurityParams
    TO_MSG setting attributes for mbean type EmbeddedLDAP
    TO_MSG setting attributes for mbean type SecurityParams
    TO_MSG setting attributes for mbean type Domain
    TO_MSG setting attributes for mbean type JDBCDataSource
    TO_MSG setting attributes for mbean type JDBCXAParams
    TO_MSG setting attributes for mbean type JDBCDataSourceParams
    TO_MSG setting attributes for mbean type JDBCConnectionPoolParams
    TO_MSG setting attributes for mbean type JDBCDriverParams
    TO_MSG setting attributes for mbean type JDBCDataSourceParams
    TO_MSG setting attributes for mbean type JDBCSystemResource
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG setting attributes for mbean type JDBCProperty
    TO_MSG Saving all your changes ...
    TO_MSG Saved all your changes successfully.
    TO_MSG Your edit session is not stopped, you can continue your edits.
    TO_MSG Activating all your changes, this may take a while ...
    TO_MSG The edit lock associated with this edit session is released
    TO_MSG once the activation is completed.
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute InternalAppsDeployOnDemandEnabled on weblogic.management.configuration.DomainMBeanImpl@fffe8220([bpm]) has been changed. This may require redeploying or rebooting configured entities>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.LogMBeanImpl@1759a12([bpm]/Log[bpm]) has been changed. This may require redeploying or rebooting configured entities>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute ListenAddress on weblogic.management.configuration.ServerMBeanImpl@2ddd7637([bpm]/Servers[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.LogMBeanImpl@2df105fa([bpm]/Servers[BPMServer]/Log[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.WebServerLogMBeanImpl@2df106e5([bpm]/Servers[BPMServer]/WebServer[BPMServer]/WebServerLog[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
    TO_MSG
    TO_MSG The following non-dynamic attribute(s) have been changed on MBeans
    TO_MSG that require server re-start:
    TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=Log,Server=BPMServer
    TO_MSG Attributes changed : RotateLogOnStartup
    TO_MSG
    TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=Server
    TO_MSG Attributes changed : ListenAddress
    TO_MSG
    TO_MSG MBean Changed : com.bea:Name=bpm,Type=Log
    TO_MSG Attributes changed : RotateLogOnStartup
    TO_MSG
    TO_MSG MBean Changed : com.bea:Name=bpm,Type=Domain
    TO_MSG Attributes changed : InternalAppsDeployOnDemandEnabled, ProductionModeEnabled
    TO_MSG
    TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=WebServerLog,Server=BPMServer,WebServer=BPMServer
    TO_MSG Attributes changed : RotateLogOnStartup
    TO_MSG
    TO_MSG Activation completed
    TO_MSG Creating a user ...
    TO_MSG
    TO_MSG Created user successfully
    TO_MSG Deploying application from /root/OraBPMwlHome/j2ee/weblogic/deployer/wlj2eedeployer.ear to targets BPMServer (upload=true) ...
    TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ28￥ﾈﾆ01￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer [archive: /root/OraBPMwlHome/j2ee/weblogic/deployer/wlj2eedeployer.ear], to BPMServer .>
    TO_MSG .Completed the deployment of Application with status completed
    TO_MSG Current Status of your Deployment:
    TO_MSG Deployment command type: deploy
    TO_MSG Deployment State : completed
    TO_MSG Deployment Message : no message
    TO_MSG Deploying application from /root/OraBPMwlHome/ears/engine/01-eng-bpmengine.ear to targets BPMServer (upload=true) ...
    TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ28￥ﾈﾆ08￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine [archive: /root/OraBPMwlHome/ears/engine/01-eng-bpmengine.ear], to BPMServer .>
    TO_MSG .................Completed the deployment of Application with status completed
    TO_MSG Current Status of your Deployment:
    TO_MSG Deployment command type: deploy
    TO_MSG Deployment State : completed
    TO_MSG Deployment Message : no message
    TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/08-workspace-XAFDIDS.ear to targets BPMServer (upload=true) ...
    TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ29￥ﾈﾆ48￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 08-workspace-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/08-workspace-XAFDIDS.ear], to BPMServer .>
    TO_MSG .Completed the deployment of Application with status completed
    TO_MSG Current Status of your Deployment:
    TO_MSG Deployment command type: deploy
    TO_MSG Deployment State : completed
    TO_MSG Deployment Message : no message
    TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/09-feeds-XAFDIDS.ear to targets BPMServer (upload=true) ...
    TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ30￥ﾈﾆ45￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 09-feeds-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/09-feeds-XAFDIDS.ear], to BPMServer .>
    TO_MSG .Completed the deployment of Application with status completed
    TO_MSG Current Status of your Deployment:
    TO_MSG Deployment command type: deploy
    TO_MSG Deployment State : completed
    TO_MSG Deployment Message : no message
    TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/06-workspaceadmin-XAFDIDS.ear to targets BPMServer (upload=true) ...
    TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ31￥ﾈﾆ00￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 06-workspaceadmin-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/06-workspaceadmin-XAFDIDS.ear], to BPMServer .>
    TO_MSG .Completed the deployment of Application with status completed
    TO_MSG Current Status of your Deployment:
    TO_MSG Deployment command type: deploy
    TO_MSG Deployment State : completed
    TO_MSG Deployment Message : no message
    TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/07-papiws-wls103-XAFDIDS.ear to targets BPMServer (upload=true) ...
    TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ31￥ﾈﾆ31￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 07-papiws-wls103-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/07-papiws-wls103-XAFDIDS.ear], to BPMServer .>
    TO_MSG ..WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ31￥ﾈﾆ48￧ﾧﾒ CST> <Error> <HTTP> <BEA-101220> <Error occurred while setting document root for "weblogic.servlet.internal.WebAppServletContext@30302d0 - appName: '07-papiws-wls103-XAFDIDS.ear', name: 'papiws', context-path: '/papiws', spec-version: '2.5'" to "/root/weblogic3/bpm/servers/BPMServer/tmp/_WL_user/07-papiws-wls103-XAFDIDS.ear/f0r1c0/papiws.war".>
    TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ31￥ﾈﾆ48￧ﾧﾒ CST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1249792304208' for task '5'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'papiws''
    TO_MSG WLST-WLS-1249792014056: weblogic.application.ModuleException: Failed to load webapp: 'papiws'
    TO_MSG WLST-WLS-1249792014056:      at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
    TO_MSG WLST-WLS-1249792014056:      Truncated. see log file for complete stacktrace
    TO_MSG WLST-WLS-1249792014056: java.io.IOException: Error opening file
    TO_MSG WLST-WLS-1249792014056:      at java.util.zip.ZipFile.open(Native Method)
    TO_MSG WLST-WLS-1249792014056:      at java.util.zip.ZipFile.<init>(ZipFile.java:117)
    TO_MSG WLST-WLS-1249792014056:      at java.util.zip.ZipFile.<init>(ZipFile.java:133)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.utils.classloaders.ZipClassFinder.<init>(ZipClassFinder.java:23)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.application.io.ArchivedWar$WebInfClassesFinder.<init>(ArchivedWar.java:290)
    TO_MSG WLST-WLS-1249792014056:      Truncated. see log file for complete stacktrace
    TO_MSG WLST-WLS-1249792014056: >
    TO_MSG WLST-WLS-1249792014056: java.io.FileNotFoundException: /root/weblogic3/bpm/config/config.xml (Too many open files)
    TO_MSG WLST-WLS-1249792014056:      at java.io.FileOutputStream.open(Native Method)
    TO_MSG WLST-WLS-1249792014056:      at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
    TO_MSG WLST-WLS-1249792014056:      at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.utils.FileUtils.writeToFile(FileUtils.java:115)
    TO_MSG WLST-WLS-1249792014056:      at weblogic.utils.Fil

  • Configuration is failed - BPM for Weblogic 10.3.1

    1, I install BPM for Weblogic.
    2, I create a domain for weblogic using config tool and start it.
    3, I create a new directory.
    However, the configuration is failed.
    The BPM for weblogic is installed in XP and the window of selecting JDK is not pop out.
    The log is as follows:
    For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your
    changes once you are done. creating mbean of type JMSServer ... creating mbean of type JMSSystemResource ... creating mbean of type SubDeployment ... creating mbean of type Queue ... creating mbean of type Topic ... creating mbean of type ConnectionFactory ... creating mbean of type ConnectionFactory ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... setting attributes for mbean type JMSServer setting attributes for mbean type JMSSystemResource setting attributes for mbean type SubDeployment setting attributes for mbean type Queue setting attributes for mbean type Topic setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCXAParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty Saving all your changes ... Saved all your changes successfully. Your edit session is not stopped, you can continue your edits. Activating all your changes, this may take a while ...
    The edit lock associated with this edit session is released
    once the activation is completed. Activation completed Creating a user ... Created user successfully Deploying application from E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:44 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer [archive: E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear], to examplesServer .> .Completed the deployment of Application with status completed Current Status of your Deployment: Deployment command type: deploy Deployment State : completed Deployment Message : no message Deploying application from E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:54 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine3 [archive: E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear], to examplesServer .> Failed to deploy the application with status failed Current Status of your Deployment: Deployment command type: deploy Deployment State : failed Deployment Message : java.lang.OutOfMemoryError: Java heap space No stack trace available. This Exception occurred at Wed Jul 15 12:12:17 CST 2009. weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed.      at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48)      at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185)      at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536)      at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429)      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)      at java.lang.reflect.Method.invoke(Method.java:597)      at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)      at org.python.core.PyMethod.__call__(PyMethod.java:96)      at org.python.core.PyObject.__call__(PyObject.java:248)      at org.python.core.PyObject.invoke(PyObject.java:2016)      at org.python.pycode._pyx17.deploy$8(<iostream>:223)      at org.python.pycode._pyx17.call_function(<iostream>)      at org.python.core.PyTableCode.call(PyTableCode.java:208)      at org.python.core.PyTableCode.call(PyTableCode.java:404)      at org.python.core.PyFunction.__call__(PyFunction.java:184)      at org.python.pycode._pyx16.deploy_Applications$61(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:623)      at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py)      at org.python.core.PyTableCode.call(PyTableCode.java:208)      at org.python.core.PyTableCode.call(PyTableCode.java:256)      at org.python.core.PyFunction.__call__(PyFunction.java:169)      at org.python.pycode._pyx16.f$0(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:738)      at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py)      at org.python.core.PyTableCode.call(PyTableCode.java:208)      at org.python.core.PyCode.call(PyCode.java:14)      at org.python.core.Py.runCode(Py.java:1135)      at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)      at weblogic.management.scripting.WLST.main(WLST.java:129)      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)      at java.lang.reflect.Method.invoke(Method.java:597)      at weblogic.WLST.main(WLST.java:29)
    Exiting WebLogic Scripting Tool.
    <Jul 15, 2009 12:12:17 PM CST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.> QuestionConfirm Action
    Do you want to cancel this wizard?

    Hi Ye,
    I noticed this afternoon that Oracle's refering to Oracle WebLogic 10.3.1 as "Oracle WebLogic 11g".
    Know this comes as no surprise to you, but when I tried to install Oracle BPM 10gR3 Enterprise on WebLogic 11g (WebLogic 10.3.1) this afternoon it failed. A friend pointed out to me that Oracle WebLogic 11g does not support the DataDirect JDBC driver. Since Oracle BPM Enterprise 10gR3 uses this driver to connect to both its Engine database and Directory Service databases, he's thinking this might be the cause of our problem.
    It would be worth verifying this with Support. Here's what I think they'll point you to. The Oracle BPM 10gR3 release notes(http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/relnotes/release_notes_OracleBPM10gR3.htm#N65589) indicate that the only WebLogic application servers supported are Oracle WebLogic 10.3 (10gR3), Oracle WebLogic 10.0 MP1.
    Again, talk to Support, but I don't think there's a workaround. The only thing I think you can do is to uninstall WebLogic 10.3.1 and then install WebLogic 10.3 if you want to install Oracle BPM 10gR3 Enterprise on it.
    Dan

  • Can I determine what clients are connected to my weblogic server?

    Hi, is there anyway of determining what clients are connected to my Weblogic 8.1 server - I want this information to be generated for me, not by maintaining a list when clients login initially to the server.
    Also is there any thing that gets fired when a client terminates prematurely - for example being killed by the task manager. I need to know this, so the server knows what users are currently logged in, to prevent a user logging in twice (via the same username login).
    Cheers,
    Ants.

    Hi,
    Cousld u send me a simple example to check my Weblogic server for EJB with client.
    Iam struggling from last todays.
    and also tell what software i should use for deployment of EJB of weblogic 8.1.
    ur help highly appriciate by me
    My mail ID: [email protected]
    thanks,
    AHOY

  • How to configure a error queue for weblogic jms topic

    Hi guys.
    I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
    1. using jms transport configure proxy service:
    Retry Count :3
    Retry Interval:10
    Error Destination: ErrorTopic
    Expiration Policy: Redirect
    I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.
    Any suggestions for this topic? Can anyone provide some helps or any useful links.
    Thanks in advance.
    Mingzhuang

    Mingzhuang
    I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
    1. using jms transport configure proxy service:
    Retry Count :3
    Retry Interval:10
    Error Destination: ErrorTopic
    Expiration olicy: RedirectUnlike File/SFTP, JMS proxy service definition does not have the concept of Error Destination. To accomplish similar functionality go to JMSQ on (for which proxy is configured) server console (http://localhost:7001/console) and configure the Error Destination. Following URL will help in how to configure JMS Q.
    http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueues.html
    http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueueDeliveryFailure.html
    I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.If every thing is configured as per above step, then the after retries, the weblogic server will put the message into JMS topic configured. Your proxy will receive from this topic.
    Let me know if we are not on same page.
    Cheers
    Manoj

  • Workspace of BPM Enterprise 10.3.1 for Weblogic

    I just install BPM Enterprise 10.3.1 for weblogic. I configure it using default setting.
    In the BPM admin center, it has 5 options:
    Start
    Stop
    Start process administrator
    configuration
    exit
    Where is the workspace?

    Hi YE,
    If you are deploying BPM on a Weblogic Server you'll find your workspace on the following url
    http://localhost:7001/workspace
    This is because the all the jar services are deployed to the WLS. You can monitor if it is installed by going into the Process administrator -> Engines -> J2EE jar deployment (or something)
    There you'll find all the jars that are/can be deployed. If you make any changes using the BPM admin center configuration don't forget to recreate and redeploy the jar file.
    Hope this helps.
    Kind regards
    Nils

  • Setup issues: Apache plugin for Weblogic

    Hi,
    I've spent couple of days without success trying to configure apache plugin for weblogic. I've configured in accordance with bea documentation and it works fine in windows environment but fails in Solaris 9.
    Plugin log file says it's processed the request successfully but I see error message in browser saying it can't find the jsp file. It works fine if I access the weblogic box directly without going through apache.
    I'm using Weblogic 8.1 SP2, single server.
    Please find below the messages appear in browser, plugin logs, and apache version.
    Thanks in advance for your help.
    ======================Browser Error Message================
    JSP Processing Error
    HTTP Error Code: 404
    Error Message:JSPG0036E: Failed to find resource /AppConsole/common/login.jsp
    Root Cause:java.io.FileNotFoundException: JSPG0036E: Failed to find resource /AppConsole/common/login.jsp     at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.findWrapper(JSPExtensionProcessor.java:246)     at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:228)     at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2841)     at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220)     at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204)     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681)     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77)     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421)     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367)     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276)     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201)     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934)     at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021)     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1332)
    ======================Browser Error Message End================
    ==========Apache version============
    Please find apache version and plugin logs below:
    # ./apachectl -v
    Server version: IBM_HTTP_Server/6.0 Apache/2.0.47
    Server built: Nov 4 2004 09:58:18
    ==========Apache version End============
    =================Plugin Logs================
    ================New Request: [GET /AppConsole/ HTTP/1.1] =================
    Mon Jun 12 08:20:14 2006 INFO: SSL is not configured
    Mon Jun 12 08:20:14 2006 After trimming path: '/AppConsole/'
    Mon Jun 12 08:20:14 2006 The final request string is '/AppConsole/'
    Mon Jun 12 08:20:14 2006 SEARCHING id=[83.231.147.129:27110] from current ID=[83.231.147.129:27110]
    Mon Jun 12 08:20:14 2006 @@@FOUND...id=[83.231.147.129:27110], server_name=[83.231.147.65], server_port=[80]
    Mon Jun 12 08:20:14 2006 attempt #0 out of a max of 5
    Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110/27110 at line 1981 for '/AppConsole/'
    Mon Jun 12 08:20:14 2006 INFO: New NON-SSL URL
    Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110
    Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Via]=[1.0 NMUKPER]
    Mon Jun 12 08:20:14 2006 Hdrs from clnt:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
    Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
    Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
    Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Host]=[83.231.147.65]
    Mon Jun 12 08:20:14 2006 URL::sendHeaders(): meth='GET' file='/AppConsole/' protocol='HTTP/1.1'
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Via]=[1.0 NMUKPER]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Host]=[83.231.147.65]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Connection]=[Keep-Alive]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-SSL]=[false]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-Client-IP]=[62.172.128.4]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Proxy-Client-IP]=[62.172.128.4]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-Forwarded-For]=[62.172.128.4]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Request-ClusterInfo]=[true]
    Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[30]
    Mon Jun 12 08:20:14 2006 INFO: sysSend 639
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Content-Type]=[text/html]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-Hash]=[mx4NFnJY0ypWiiF1G2lM080SToc]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
    Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Transfer-Encoding]=[chunked]
    Mon Jun 12 08:20:14 2006 parsed all headers OK
    Mon Jun 12 08:20:14 2006 Hdrs to client:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
    Mon Jun 12 08:20:14 2006 Hdrs to client:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
    Mon Jun 12 08:20:14 2006 Hdrs to client:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
    Mon Jun 12 08:20:14 2006 Hdrs to client:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
    Mon Jun 12 08:20:14 2006 Hdrs to client:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
    Mon Jun 12 08:20:14 2006 canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
    Mon Jun 12 08:20:14 2006 closeConnection in load_utils: deleting URL*
    Mon Jun 12 08:20:14 2006 request [AppConsole/] processed sucessfully..................
    =================Plugin Logs End================

    Yes it is IBM Http Server, but it works fine from Windows accessing the same weblogic server I'm trying to connect from Solaris.
    I see 500 error in the apache access log file.
    I've also tried with by setting "MaxRequestsPerChild" to 0 in the apache config file but no good.
    Please find below httpd.conf file content.
    ==============httpd.conf===============
    ServerName eus0000168.eu.verio.net
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "/opt/IBMIHS" will be interpreted by the
    # server as "/opt/IBMIHS/logs/foo.log".
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # NOTE! If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation (available
    # at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
    # you will save yourself a lot of trouble.
    # Do NOT add a slash at the end of the directory path.
    ServerRoot "/opt/IBMIHS"
    # The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
    #LockFile logs/accept.lock
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile logs/httpd.pid
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 10
    ## Server-Pool Size Regulation (MPM specific)
    # worker MPM
    # ThreadLimit: maximum setting of ThreadsPerChild
    # ServerLimit: maximum setting of StartServers
    # StartServers: initial number of server processes to start
    # MaxClients: maximum number of simultaneous client connections
    # MinSpareThreads: minimum number of worker threads which are kept spare
    # MaxSpareThreads: maximum number of worker threads which are kept spare
    # ThreadsPerChild: constant number of worker threads in each server process
    # MaxRequestsPerChild: maximum number of requests a server process serves
    <IfModule worker.c>
    #StartServers 5
    StartServers 1
    MaxClients 150
    MinSpareThreads 25
    MaxSpareThreads 75
    ThreadsPerChild 25
    MaxRequestsPerChild 1000
    </IfModule>
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, in addition to the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
    # Change this to "Listen 0.0.0.0:port" to restrict the server to
    # IPv4.
    #Listen 12.34.56.78:80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule access_module modules/mod_access.so
    LoadModule auth_module modules/mod_auth.so
    #LoadModule auth_anon_module modules/mod_auth_anon.so
    LoadModule auth_dbm_module modules/mod_auth_dbm.so
    LoadModule include_module modules/mod_include.so
    LoadModule log_config_module modules/mod_log_config.so
    LoadModule env_module modules/mod_env.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    LoadModule usertrack_module modules/mod_usertrack.so
    LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    #LoadModule proxy_module modules/mod_proxy.so
    #LoadModule proxy_connect_module modules/mod_proxy_connect.so
    #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    #LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule dav_module modules/mod_dav.so
    LoadModule autoindex_module modules/mod_autoindex.so
    LoadModule asis_module modules/mod_asis.so
    #LoadModule info_module modules/mod_info.so
    LoadModule cgid_module modules/mod_cgid.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule dir_module modules/mod_dir.so
    LoadModule imap_module modules/mod_imap.so
    LoadModule actions_module modules/mod_actions.so
    #LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule rewrite_module modules/mod_rewrite.so
    #LoadModule deflate_module modules/mod_deflate.so
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    #LoadModule status_module modules/mod_status.so
    <IfModule mod_status.c>
    ExtendedStatus On
    </IfModule>
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
    # . On HPUX you may not be able to use shared memory as nobody, and the
    # suggested workaround is to create a user www and use that user.
    # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
    # when the value of (unsigned)Group is above 60000;
    # don't use Group #-1 on these systems!
    User nobody
    Group nobody
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If this is not set to valid DNS name for your host, server-generated
    # redirections will not work. See also the UseCanonicalName directive.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address anyway, and this will make
    # redirections work in a sensible way.
    #ServerName new.host.name:80
    # UseCanonicalName: Determines how Apache constructs self-referencing
    # URLs and the SERVER_NAME and SERVER_PORT variables.
    # When set "Off", Apache will use the Hostname and Port supplied
    # by the client. When set "On", Apache will use the value of the
    # ServerName directive.
    UseCanonicalName Off
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    #DocumentRoot "/opt/IBMIHS/htdocs/en_US"
    #DocumentRoot "/www/a"
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/opt/IBMIHS/htdocs/en_US">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs-2.0/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # Options FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # UserDir: The name of the directory that is appended onto a user's home
    # directory if a ~user request is received.
    UserDir public_html
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit Indexes
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    # The index.html.var file (a type-map) is used to deliver content-
    # negotiated documents. The MultiViews Option can be used for the
    # same purpose, but it is much slower.
    DirectoryIndex index.html index.html.var
    # AccessFileName: The name of the file to look for in each directory
    # for additional configuration directives. See also the AllowOverride
    # directive.
    AccessFileName .htaccess
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    </Files>
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    TypesConfig conf/mime.types
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    <IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # EnableMMAP: Control whether memory-mapping is used to deliver
    # files (assuming that the underlying OS supports it).
    # The default is on; turn this off if you serve from NFS-mounted
    # filesystems. On some systems, turning it off (regardless of
    # filesystem) can improve performance; for details, please see
    # http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
    # EnableMMAP off
    # EnableSendfile: Control whether the sendfile kernel support is
    # used to deliver files (assuming that the OS supports it).
    # The default is on; turn this off if you serve from NFS-mounted
    # filesystems. Please see
    # http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
    EnableSendfile off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog logs/error_log
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel debug
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog logs/access_log common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog logs/referer_log referer
    #CustomLog logs/agent_log agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog logs/access_log combined
    # ServerTokens
    # This directive configures what you return as the Server HTTP response
    # Header. The default is 'Full' which sends information about the OS-Type
    # and compiled in modules.
    # Set to one of: Full | OS | Minor | Minimal | Major | Prod
    # where Full conveys the most information, and Prod the least.
    ServerTokens Prod
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (internal error documents, FTP directory
    # listings, mod_status and mod_info output etc., but not CGI generated
    # documents or custom error documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature Off
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/". If the fakename is slash-terminated, then the
    # realname must also be slash terminated, and if the fakename omits the
    # trailing slash, the realname must also omit it.
    # We include the /icons/ alias for FancyIndexed directory listings. If you
    # do not use FancyIndexing, you may comment this out.
    Alias /icons/ "/opt/IBMIHS/icons/"
    <Directory "/opt/IBMIHS/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "/opt/IBMIHS/cgi-bin/"
    <IfModule mod_cgid.c>
    # Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
    # for setting UNIX socket for communicating with cgid.
    #Scriptsock logs/cgisock
    </IfModule>
    # "/opt/IBMIHS/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/opt/IBMIHS/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Directives controlling the display of server-generated directory listings.
    # IndexOptions: Controls the appearance of server-generated directory
    # listings.
    IndexOptions FancyIndexing VersionSort
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    ReadmeName README.html
    HeaderName HEADER.html
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz
    # AddType allows you to add to or override the MIME configuration
    # file mime.types for specific file types.
    AddType application/x-tar .tgz
    AddType image/x-icon .ico
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For files that include their own HTTP headers:
    #AddHandler send-as-is asis
    # For server-parsed imagemap files:
    #AddHandler imap-file map
    # For type maps (negotiated resources):
    # (This is enabled by default to allow the Apache "It Worked" page
    # to be distributed in multiple languages.)
    AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    # Putting this all together, we can internationalize error responses.
    # We use Alias to redirect any /error/HTTP_<error>.html.var response to
    # our collection of by-error message multi-language collections. We use
    # includes to substitute the appropriate text.
    # You can modify the messages' appearance without changing any of the
    # default HTTP_<error>.html.var files by adding the line:
    # Alias /error/include/ "/your/include/path/"
    # which allows you to create your own set of files by starting with the
    # /opt/IBMIHS/error/include/ files and copying them to /your/include/path/,
    # even on a per-VirtualHost basis. The default include files will display
    # your Apache version number and your ServerAdmin email address regardless
    # of the setting of ServerSignature.
    # The internationalized error documents require mod_alias, mod_include
    # and mod_negotiation. To activate them, uncomment the following 30 lines.
    # Alias /error/ "/opt/IBMIHS/error/"
    # <Directory "/opt/IBMIHS/error">
    # AllowOverride None
    # Options IncludesNoExec
    # AddOutputFilter Includes html
    # AddHandler type-map var
    # Order allow,deny
    # Allow from all
    # LanguagePriority en de es fr it nl sv
    # ForceLanguagePriority Prefer Fallback
    # </Directory>
    # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
    # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
    # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
    # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
    # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
    # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
    # ErrorDocument 410 /error/HTTP_GONE.html.var
    # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
    # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
    # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
    # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
    # ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
    # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
    # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
    # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
    # The following directives modify normal HTTP response behavior to
    # handle known problems with browser implementations.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
    # The following directive disables redirects on non-GET requests for
    # a directory that does not include the trailing slash. This fixes a
    # problem with Microsoft WebFolders which does not appropriately handle
    # redirects for folders with DAV methods.
    # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
    BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
    BrowserMatch "^WebDrive" redirect-carefully
    BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
    BrowserMatch "^gnome-vfs" redirect-carefully
    # Allow server status reports generated by mod_status,
    # with the URL of http://servername/server-status
    # Change the ".example.com" to match your domain to enable.
    #<Location /server-status>
    # SetHandler server-status
    # Order deny,allow
    # Deny from all
    # Allow from .example.com
    #</Location>
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".example.com" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from .example.com
    #</Location>
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    #Enable the forward proxy server. Note: Do not use the ProxyRequests directive if
    #all you require is reverse proxy.
    #ProxyRequests On
    #<Proxy *>
    # Order deny,allow
    # Deny from all
    # Allow from .example.com
    #</Proxy>
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    #ProxyVia On
    #</IfModule>
    # End of proxy directives.
    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at
    # <URL:http://httpd.apache.org/docs-2.0/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # Use name-based virtual hosting.
    #NameVirtualHost *
    NameVirtualHost 83.231.147.65:80
    <VirtualHost 83.231.147.65:80>
    ServerName eus0000168
    DocumentRoot "/www/a/global/nissan-europe"
    RewriteEngine on
    RewriteLogLevel 0
    RewriteOptions inherit
    #--RAM----
    LoadModule weblogic_module modules/mod_wl_20.so
    Debug ALL
    WLLogFile "/logs/apache2/wllog.log"
    StatPath true
    DebugConfigInfo On
    KeepAliveEnabled ON
    <IfModule mod_weblogic.c>
    WebLogicHost 83.231.147.129
    #WebLogicHost eus0000160
    #WebLogicCluster eus0000160.eu.verio.net:27110,eus0000160.eu.verio.net:27001
    WebLogicPort 27110
    </IfModule>
    DynamicServerList OFF
         <Location /AppConsole>
         SetHandler weblogic-handler
         </Location>
    <Location /console>
    SetHandler weblogic-handler
    </Location>
    <Location /HTTPClnt>
    SetHandler weblogic-handler
    </Location>
    <Location /iiop>
    SetHandler weblogic-handler
    </Location>
    #------RAM------
    Alias /data "/www/a/data"
    Alias /at "/www/a/at"
    Alias /ch "/www/a/ch"
    Alias /ch_fr "/www/a/ch/ch_FR"
    Alias /ch_de "/www/a/ch/ch_DE"
    Alias /de "/www/a/de"
    Alias /es "/www/a/es"
    Alias /fr "/www/a/fr"
    Alias /it "/www/a/it"
    Alias /nl "/www/a/nl"
    Alias /se "/www/a/se"
    Alias /tr "/www/a/tr"
    Alias /uk "/www/a/uk"
    Alias /cz "/www/a/cz"
    Alias /hu "/www/a/hu"
    Alias /sk "/www/a/sk"
    Alias /global "/www/a/global"
    Alias /dk "/www/a/dk"
    Alias /fi "/www/a/fi"
    Alias /no "/www/a/no"
    Alias /pl "/www/a/pl"
    Alias /pt "/www/a/pt"
    ErrorDocument 404 /error404.html
    ErrorDocument 500 /error.html
    </VirtualHost>
    Include conf/virtual-hosts/
    CoreDumpDirectory /logs/apache2
    LoadModule was_ap20_module /opt/IBM/WebSphere/Plugins/bin/mod_was_ap20_http.so
    WebSpherePluginConfig /opt/IBM/WebSphere/Plugins/config/webserver1/plugin-cfg.xml
    LoadModule weblogic_module modules/mod_wl_20.so
    Debug ALL
    WLLogFile "/logs/apache2/wllog.log"
    StatPath true
    DebugConfigInfo ON
    KeepAliveEnabled ON
    <IfModule mod_weblogic.c>
    WebLogicHost 83.231.147.129
    WebLogicPort 27110
    </IfModule>
    CoreDumpDirectory /logs/apache2
    D

  • Examples.cluster.rmi for WebLogic Server 11g

    How can I get package examples.cluster.rmi for WebLogic Server 11g?
    I would like to perform a similiar test like the following:
    https://freepaper.taichung.gov.tw/examplesWebApp/examples/src/examples/cluster/rmi/package-summary.html
    Thanks a lot

    Hi,
    I have just now installed WLS via the net installer, and the default examples server password of welcome1 does indeed work for me.
    However, I note from your post that you are using port 7101, not 7001. Could that be the issue?
    http://localhost:7101/console/login/LoginForm.jspKevin

  • What happened to Oracle Workshop for Weblogic?

    I just installed a more recent version the Oracle OSB (wls1033_oepe111150_win32.exe) but i can't seem to find the Oracle Workshop for Weblogic anymore in this install. I do find the Oracle Enteprise Pack for Eclipe but when i open it there is no Oracle Service Bus perspective nor can i create a new Oracle Service Bus project. Do i have to install something more?

    Here are the installation instructions for Oracle Service Bus 11.1.1.3.
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15017/before.htm#CHDHCJEC
    Check section 3.4 for prerequisites on WebLogic Server and OEPE versions.
    thanks,
    greg

  • Single Client Access Name for Weblogic Forms and Reports.

    I have a 2 node clustered system:
    Windows 2008 R2 64-bit
    Weblogic 10.3.3 (on each node)
    Weblogic Forms and Reports 11.1.1.3 (on each node)
    Database 11gR2 RAC 11.2.0.1 (on each node)
    The forms and reports are clustered and I can connect to each from each of the two servers and the cluster is working well.
    The database uses Single Client Access Name (SCAN) to present the database as if it were one server called dbserver1.
    I was wondering if there was a similar thing for Weblogic and what everyone else uses to present their application as a single name to the user.
    I tried using Windows Network Load Balancing, but this stops the database scan listeners from working.
    Thanks.

    Dear,
    Did you find an answer to your question back in 2009?
    We are facing the same installation architecture, but we do not find any concrete information regarding SCAN with Oracle Forms 11g
    Geert

  • Workshop for weblogic and spring 2.0.6 not working on weblogic 92

    Hi,
    I try to use workshop for weblogic 10.1 to create a web project using spring mvc framework and deploy it to a weblogic 9.2 server, and it gives me the error.
    Here's what I have done:
    Create a 9.2 server.
    Create a web project with spring facet, I downloaded spring 2.0.6.
    I created a test jsp page along with applicationContext.xml and springServlet.xml spring support.
    When I start the server and publish the ear to the server,
    I got the following error:
    Aug 28, 2007 9:18:03 AM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    <Aug 28, 2007 9:18:27 AM EDT> <Error> <HTTP> <BEA-101216> <Servlet: "SpringContextServlet" failed to preload on startup in Web application: "springmvcWar".
    java.lang.NoClassDefFoundError: weblogic/i18n/logging/MessageLoggerRegistryListener
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
         at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
         at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:338)
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:291)
         Truncated. see log file for complete stacktrace
    I couldn't find the class weblogic/i18n/logging/MessageLoggerRegistryListener anywhere.
    Does anybody have seen this error before.
    Thanks
    maildt

    Hi,
    I tried the scenario against 9.2mp1 server and 9.2mp2 server and the publish worked fine.
    The only difference is the jsp file you created
    Can you remove your jsp file and see if the publish still fails?
    Which version of 9.2 server are you using? Also, what all facets are you using other than spring?
    Can you also try something and see if it helps?
    1. Open a new workspace
    2. In Window -> Preferences -> WebLogic -> J2EE Libraries, removed the logging bridge libraries (the 10.0 version) and re-added these libraries from a 9.2 installation.
    Basically they are
    wls-commonslogging-bridge 1.0/1.0
    wls-commonslogging-bridge-war 1.0/1.0
    wls-commonslogging-bridge 1.0/1.1
    wls-commonslogging-bridge-war 1.0/1.1
    and add 2 jars from 9.2_BEA_HOME/weblogic92\common\deployable-libraries
    3. Create web project and follow the other steps
    Thanks
    Vimala

  • Weblogic.appc compiler for Weblogic 9 and higher version

    We had problem precompiling the jsp's using weblogic.jspc compiler after migrating the project from 8.1 to 9.2. From the edocs weblogic documentation we see that jspc compiler is deprecated from weblogic 9 onwards and they recommend using weblogic.appc for precompiling the jsp's.
    Please note if you are passing runtime expression values in the name attribute of the jsp param tag, you will have to explicitly enabke "<rtexprvalue-jsp-param-name>" to true in weblogic.xml deployment descriptor (format shown below).
    <weblogic-web-app>
    <jsp-descriptor>
    <rtexprvalue-jsp-param-name>true</rtexprvalue-jsp-param-name>
    </jsp-descriptor>
    </weblogic-web-app>
    Below is the edocs link which has JSP descriptors information for Weblogic 9,2
    http://e-docs.bea.com/wls/docs92/webapp/weblogic_xml.html#wp1038491
    - - Tarun

    The solution given in the below link worked for me .
    http://a-developer-life.blogspot.com/2010/11/injecting-into-ejb3-with-google-guice.html?showComment=1328674836129#c7251888680841418914

Maybe you are looking for