Installtion of wharehouse without workflow.

Dear all,
I am new comer for oracle warehouse. I found the below location and install warehouse software and import data end extract data as it instruct. But i coudn't get an idea of oracle workflow. There were some error occur while installing oracle workflow.
http://www.oracle.com/technology/obe/10gr2_owb/admin/owb10gr2_gs.htm
Is it possible to install and do the job without oracle workflow?
where could i get the tutorials of oracle warehouse using materialize view.
Please Help
upul

Hi,
LabVIEW is officially not supported on Citrix. For the list of supported OS and system requirements see here.

Similar Messages

PO Mail trigerring without workflow

Hi ,
I have one requirement,
while creating Purchaseorder i want the following requirements
1)After creating the PO while saving the information mail should go to the folowingpersons without workflow.
      1) who created the PO
      2)who is the Purchaser based on the Purchase group.
      3)who is the approver based on the release strategy.We configure release code 4 levels
          3.1)Finance mangaer - FM, General Manager - GM, Purchasing Head - PH.
                the information mail want to go this three persons while saving the PO.
     4) after creating the PO if we do any changes in the po that information mail also want to be go on this following person
     5)after release approving also mail want to go the following persons
     6)if they cancel the release also the mail want to go the following persons.
which table i can take the particular persons mail id
how to fetch the data
I want the table name and field name for this .how to link with Ekko, ekpo
If any BADI Available for this .....
Pls let me know this ...
Regards,
K.Shanmugasundaram,

Hi,
1)After creating the PO while saving the information mail should go to the folowingpersons without workflow
Not possible and no Badi for same
Kailas

Is it possible to send email notifications in UCM without workflow/java?

Is it possible to send email notifications in UCM without workflow/java?
I need to send email notifications when an item is checked-in ,without workflow and without java code.
Thanks,
Chely

Yes. You need subscriptions - see here http://docs.oracle.com/cd/E23943_01/doc.1111/e10797/c04_working_with_files.htm#CSUSG899

Notification without workflow

Dear all,
our client is not having workflow. for incoming inspection i am proposing following solution.
two role will be there
Quality inspector
Quality manager
Process is as follows
Quality Inspector will do Result recording. and if any defects observed he will do defect recording in this case notification will get generated.
For notification Quality Manager is responsible for taking decision weather to accept it with deviation or to reject after notification is confirmed
Usage decision wil be given for lot by Quality inspector.
Wether it is possible without workflow.
thanx & regards,
Harish.

Hi Harish,
It is possible with out Workflow, we have Follow up actions feature to initiate reporting of inspection lots.
Pl go through this [link|http://help.sap.com/saphelp_47x200/helpdata/en/18/438983449011d189420000e829fbbd/frameset.htm]
Hope this helps u
Regards
Venugopal
Edited by: Venugopal Dudgundi on Feb 27, 2009 7:20 AM
Edited by: Venugopal Dudgundi on Feb 27, 2009 7:21 AM
Edited by: Venugopal Dudgundi on Feb 27, 2009 7:25 AM

Implementing Workorder without workflows in Release 12

Can the Workorder workflow in eAM be implemented without the approvals? We just want the workflow to control the statuses. We do not need any approvals in our business process.
Any suggestions?
RV

Your question is not clear RV

Execute Processflow without workflow schema

Hi all,
I am new to OWB and hence a very basic question :
Is it possible to execute a process flow without using oracle workflow?
(Using wb_rt_api_exec.run_task maybe??)
Thanks

No, it is impossible.
OWB runtime uses workflow engine (workflow API) for executing processflows.
So in this case workflow server is a required component.
Regards,
Oleg

Actived a event (Without workflow)

Hi all.
We have a problem with a event.
We had a migration and we think that in this process an event has been desactivated.
It must run when the order (VA01) has created.
In the development enviroment it run correctly, but in Test enviroment it does not run.
We review the Tx SWO1 and PRFC. This Tx are the same configuration.
It can be with Tx sSPRO? in with Tx?
Thanks for all.
Regards

Hi All!
It is solve.
We prove with the TX SWUD and activated this event.
In the migration it must be desactivated.
Thanks all.
PD: This Tx is very interesting for the Workflow events.
Regards.

Workflow issue with Bridge and everything else

Short and sweet. Well, not really.
I use windows - so as a result, for some reason unknown to man (after a decade of waiting), I still cannot see "previews" of most, if not all of any adobe software in the windows dialogue boxes.
think PDF's and the registry hacks we have to do to "enable" previews. But on a mac I can?
So I have to use bridge - a lot.
Now when I have a linked image in illustrator (or whatever) and choose "reveal in bridge" it will hunt and drill down through a multitude of folders and display the image in it's native folder - which I can then open in photoshop for instance - edit it - and Illustrator will detect the change and update. Awesome.
But aside from running a script to send a batch job to a program, it really doesn't "do" anything else that one would expect a "bridge" to do;
     I cannot create a "project" portfolio that would track a client project and all it's related documents.
     Or collaborate with a team.
     I cannot have non destructive edits of a document (such as using an instance of a file like lightroom does) - or "send copy to photoshop" and have Bridge stack the results.
     I cannot combine and tag collections of documents (make a database of stuff).
     I cannot ask Bridge to tell me which documents have placed documents, or (vice versa) which documents are placed into other documents - that would be so cool.
          imagine being able to select a jpeg or psd file and have the option to "Find documents using this file"
          or looking at a "project" and having a list of all first level documents with all their subsequent "placed content" listed all drop down expandable
So my beef today is that I finally spent an hour messing about thinking I had something "wrong" and went through Bridge CS6 with a fine tooth comb trying to find out if anything had changed.
and nope - it still doesn't behave as one would think it would.
Currently, I have some documents that require monthly changes to images, which for the most part came from one photo shoot, and all have essentially the same perspective, appearance, lighting and shading, but all different products and I have a folder of "preformatted images". So monthly I really only need to update the images, and a bit of text. Being posters, InDesign whines a bit for vector art manipulation, so I stick to Illustrator for this job.
But in Illustrator, I cannot choose another image to replace my linked image - without either;
     a: (reveal in bridge), select new replacement image - place as a new image, which then needs to be manipulated as the "old" image was, "remaking" all the adjustments, and then finally deleting the original linked image.
     b: (reveal in bridge) keep bridge open on the image I need (and it's name), go back to illustrator to open the "relink" windows dialogue and "blindly" browse till I find the image I want as shown in bridge.
     c: simply relink and browse blindly to find a file you can't see a preview of and guess, or drag and drop, or all the other non practical ways to replace the image.
Option B gives the desired end result where the image I have in a clipping mask, buried in a document in a certain way, with certain effects, is simply replaced without impacting anything else.
     But this takes quite some time when there are a lot of images.
So Bridge and its promised workflow functionality still isn't living up to it's purpose exactly.
Bridge isn't bridging.
With indesign, it's the same issue - you can't "relink" by revealing in bridge, choosing a "replacement" image and "update"
Maybe a "relink with Bridge" choice in the Links menu?
and in bridge, since Illustrator triggered the request, a button appears to "Replace" - once you finish browsing and highlighting the replacement image you need, just click it and it's done.
So two issues -
Why can't previews of adobe files be shown in windows explorer (still)?
     if they did, I'd really have no use for Bridge.
Why isn't bridge actually communicating with the apps connecting to it?
- and yes, I understand that I cannot ask bridge to go find a placed file and replace it with "this" file, but when illustrator "asks" for "this", bridge should be able to "respond" and give "that" since the app initiated the request.
Bridge should be a workflow tool as advertised - it should literally be able to be a proper workflow hub for all things adobe (and be able to catalogue and track all design file type previews - corel files, cad, 3d, etc)... but as it stands it's just a glorified windows explorer without workflow options.
Bridge hasn't been altered in years, and it's still lingering around - I think - so that we can simply see thumbnails, rather than just allowing each adobe program to make "previews" windows needs.
I can change metadata in windows, I can use freeware to change it extensively.
So aside from the "open in" options and the ability to browse all adobe file types, what's the point?

I couldn't read all through your post as I am jetting out of here.
Buy this:
http://www.fastpictureviewer.com/codecs/
and install it. It's relatively cheap. Screen shot is from Windows Explorer.
Handles ID, PSD, etc., files as well. Though the preview uses greeked text for the most part for the ID files.
Take care, Mike

Workflow (Process Engine) is blocked with Check FM

I use BPM and it generates a Workflow with Check Function Module at the beginning. This FM is SWF_XI_CHECK_PROCESS_START and stops with exception. Then the Process Engine stop without doing anything.
Does someone know how I can solve this problem ?
What does this FM and what for ?
Message was edited by: Franck VIDIL

Hi Udo,
In the monitoring, I have lines (one for each incomming messages) but each are with PE with green flag.
I use a correlation, the value in it is correct between the messages, but the BPM flow stopped without Workflow because of this Check FM I suppose.
Do you know if this Check FM is linked with correlation ?
Regards,
Franck.

Do we need to have workflow in place to send payslip by email?

Do we need to have workflow in place to send employee monthly payslip by email?
And if we can send it without workflow, then, is there is any involvement of ABAP?
Can system use the email address maintained in the infotype for an employee?

Thanks could you please elaborate on what should be included in the Functional Specs that would be given to an ABAP Consultant.

How Reset Workflow options in ACR?

I looked up workflow, but didn't find any discussions, and I can find items online that tell me how to SET workflow, but so far, I can't find anything that tells me how to RESET workflow.......
I don't want it to do ANYTHING. I don't want it to set Adobe RGB or bit depth, or resize or ANYTHING. I want it to leave whatever I open exactly the way it came in. When I press "Open Image",
I want it to go to Photoshop exactly the way it came in to ACR... Currently, if I open a jpg that was exported in sRGB, when it gets to Photoshop, it's 16 bit and Adobe RGB because that's what the
workflow says.....
So, how do I make workflow completely go away and not screw with anything in my image?

Let me see if I can explain this better.
I don't want it to open as a jpg or anything. I JUST want to know how to RESET the workflow settings so it doesn't change ANYTHING in whatever I open......
Here's an example... At some point, for some reason, I open a raw file in ACR, and go into the workflow and set the color space to sRGB, the bit depth to 8 bits
and the resize to 200%. When I hit "Open Image", my raw file will now open in photoshop as an sRGB, 8-bit file that's been resized to 200%. Fine, since for
no good reason that's what I told ACR to do.
Close Everything........ months later, I open another RAW file in ACR and it gets stuck with THOSE SAME SETTINGS because they automatically become the
default. I don't WANT to use those settings, so HOW do I reset the workflow so it doesn't set ANYTHING?
OR, I open a raw file in ACR, and set the color space to Prophoto and the bit depth to 16 bits. Fine... But, next I need to make a MINOR modification to a jpeg I've
created from PS (or Lightroom or right from the camera). Its in Bridge so I open it. It goes into ACR. And gets set to Prophoto and 16 bits and whatever other thing
I previously set in workflow. I don't know or care what the original color space of the jpeg was, and I don't WANT to know or care. I just want to open it in PS exactly as it
is WITHOUT workflow making any changes.......
In reality, this isn't a big problem on a daily basis for me, although it is annoying. But, I got a phone call from a semi-panicked photographer who couldn't understand WHY
her 16x20 kept showing up as a 12x16 when she reopened it in PS. What was happening was that she cropped and resized in Photoshop with a resolution of 240 ppi. Then
saved the jpeg. Which came up as a 16x20. EXCEPT, when she reopened it, it opened in ACR, where she had SOMETIME set the resolution to 300 ppi. The pixel count
was exactly the same, but when she did the "open image", in Photoshop it was now 12 x 16 @ 300 ppi instead of 16x20 @240.
So, HOW do I reset the workflow so whatever settings had been put in, get cleared and it doesn't change ANYTHING?

Workflow with validation

Please help :
I've created simple workflow chain including 4 steps - start, process, validate and stop. But after launching I've got error message "Unable to launch job. Step 'Validate' has the following error: Invalid validating record id(s) in Validate field". Validation works well without workflow, so I don't know the reason of error.

Hi Artur,
Kindly verify you followed the steps given below for Validation workflow:
1. In the Workflow design stencil validation property should carry the following attribute values
Validation : Should carry the validation name rather than the rule.
2. try to SAVE the same with other steps too.
IF issue still exist kindly revert to me.
thanks
Alexander

Workflow and autonomous transactions

I am trying to implement Workflow to execute PL/SQL procedures that are currently executed manually on my project. Most of the procedures issue commits or rollbacks and per Oracle support I needed to use PRAGMA AUTONOMOUS_TRANSACTION in the Workflow "wrapper" procedures to prevent errors with workflow. This has been successful with the vast majority of our procedures, however, in at least one case, a procedure that we execute (inserting millions of rows, Gbs of data) never finishes.
At first I thought that workflow might be the problem, but I have tested the procedure outside of Workflow in SQLPLus with the PRAGMA declared with the same result.
If I execute the procedure without the PRAGMA from SQL Plus without workflow it finishes in just under 4 hours (the expected time frame). Any ideas about what might be the cause of this strange behavior?
The problem seems to be caused by the PRAGMA which I need to implement Workflow. Any help would be much appreciated.

This sounds like a database issue rather than a workflow issue. If it does not work from PL/SQL outside of workflow, then I would suggest logging a TAR with Oracle Support. Sounds like you have narrowed it down to an autonomous transaction that runs for > 4hours.
You might want to include a simple reproducible test case as well in the TAR. In the mean time, you could try and break down the amount of work being done into a number of PL/SQL calls instead of one. For example 4 * 1hour PL/SQL calls instead of 1 that lasts 4 hours and doesnt work.
HTH
Mark

SRM Workflow (Business Rule Framework)

Hello!
I hope I will find valuable tips and information.
I was researching at the moment about the SAP SRM BRF workflow. In our company, SRM is 5.0. With version 7.0 (or 7.0.1), the existing workflow concept has been revised to be strong. Now I try to work out differences. (Pro / Cons, functions, etc.)
Does anyone here have more information, or any sources?
Thank you in advance!

Hi,
It is called "Process-Controlled Workflow". SRM 7.0 support 2 workflow frameworks.
Application-Controlled Workflow: like SRM 5.0. Development in Workflow Graphical Editor or N-Step BADI development.
Process-Controlled Workflow: Process Level definition in customize table and Agent BADI.
Main business value is TCO. Application consultant or ABAP consultant can manage Process-Controlled Workflow implementation without workflow consultant.
If SRM 5.0 functionality is fine and no often approval step change, upgrade customers can use Application-Controlled Workflow without new implementation.
New functionality will be delivered in Process-Controlled Workflow only.
Regards,
Masa

Workflow Configuration for Release Strategy

Hi All,
At present we are using Release Strategy without workflow. Now we wants to use workflow.
Request you all to guide what configuration i have to do for workflow.
I appreciate your help
Regards
Anbalagan

Hi,
     In the case of a release procedure linked to workflow, you must have previously created the user names, positions, jobs, etc. that you here assign to the release code in the organizational plan and must have linked them to the relevant standard tasks in task-specific Customizing (Basis -> Business Management -> Business Workflow -> Perform Task-Specific Customizing).
     You must assign the authorization M_EINK_FRG to the persons who are to be involved in the release procedure ( Authorization Management -> Create Authorization Profiles and Assign to Users).
If a release code is to be used in workflow, indicate this accordingly in the Workflow field
The Workflow indicator is also used to control role resolution:
·     "1 - Role Resolution with Group, Code and Plant (T16FW)"
Here you use a role resolution that is supplied in the standard system. To do so, you must assign the release point in the section Workflow
Assign a processor ID to your workflow-relevant release codes. The processor (member of staff responsible for processing the document) will then receive a work item when he or she is required to effect release.
You can assign a processor ID either directly or indirectly:
o     Direct processor assignment:
Enter a user name.
o     Indirect processor assignment:
Enter a job, for example, or a position. At runtime, the system will then determine the member(s) of staff responsible for processing the document.
Regards
Sanjay L

Installtion of wharehouse without workflow.

Similar Messages

Maybe you are looking for