Instance Alerts Package on HANA One

Installing and configuring Instance Alerts package on HANA One.
This package allows users to set alerts on Disk, Memory , CPU and Instance Uptime for HANA One instance. If alert is generated user will get email notifications describing type of alert generated, alert level set and value at alert generation.
This package will be useful if one wants to monitor their Disk, memory, CPU level on the instance and get notified if any parameter goes beyond range level.
Here are the steps one can follow to install and configure Alert package.
1) Launch HANA One Rev 70.0 from SAP HANA One on AWS Marketplace
2) Go to Addons tab -> New section on console page.
3) On Instance Alerts package click Download & Install and click Install on pop up
4) You can see the package installed in Installed section on Addons tab. Click on "Go to App" to open the UI of Instance Alert package.
You would be able to go to UI of Alert page.
5) For creating Alerts click on "Create New Alert" button. Various alerts setting are displayed.
6) Here for example we will set alert on Disk for "/usr/sap"
     i) Select Disc in Alert type
     ii) Select /usr/sap on Disc type
     iii) Set Alert level. Warning range and Critical range. Alerts are in percentage form for Disc, CPU and Memory. While Uptime is in days.
         For setting level just move the slider and set the range.
     iv) Put the Status ON if one wants to get Email notification on Alerts.
     v) Put the email you want to receive notifications.
    vi) CC list is optional. Add additional comma separated email address one wants to receive notifications
    vii) Click on confirm to set the alert list.
Below is the screenshot of email alert set on Disc for /usr/sap.
"My Alerts" section will display the alerts created.
From the row in My Alerts section one can perform operations of OFF/ON Alerts, Delete Alerts and Edit Alerts.
"Alerts History" section displays the Alerts generated if levels specified on alert type goes beyond set level.
Besides seeing the Alert in History section, you also receive email notification on Email specified while creating Alerts.
       Below is the sample email content
Thanks,
Priyank

Hi, I have met this problem very similiar with you.
It tell me the language of package and logon are different, so I was unable to create package.
I found a workaround to slove it..
I change my package language from English to English(USA).
Just a tip.
I don't understand it.

Similar Messages

Cannot use SAP HANA Studio with SAP HANA One Instance

Hello together,
i try to make some tests in the SAP HANA environment. But i got the following error message each time:
An internal error occurred during: "Updating system 'HDB' ...".
java.lang.NullPointerException
at com.sap.ndb.studio.datamodel.manager.SAPSystemState.isThereAtLeastOneIndexserverProcessWithStateColor(SAPSystemState.java:44)
at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:76)
at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:70)
at com.sap.ndb.studio.datamodel.controler.DataModelOperationJob.run(DataModelOperationJob.java:70)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
I often read about different SAP HANA One and SAP HANA Studio versions.
Following information about the versions:
Studio: Version: 1.0.52
Hana One Instance 52.1
What could be the reason for getting this error message? I hope you can help me.
Thanks in advance.
CT

Hi Nicky,
As per my knowledge, there is no separate licensing required for HANA studio. License for HANA d/b or Enterprise HANA license is sufficient.
Installation of HANA studio will not ask for any licenses.
Regards,
Suma

Unable to connect to HANA One instance from HANA Studio

I am trying to add my HANA One instance to my HANA Studio and keep getting an error "The system is not reachable, the login data could not be considered". Any pointers on how to troubleshoot this would be much appreciated.

Hello G,
We understand you situation very well. We are expecting a follow-up on the status based on our suggestion made within less than 1 hour after posting the issue even during weekend.
As far as your SAP HANA One Developer Edition, the suggestions made here for productive uses may not be relevant. Please follow-up appropriately posting and following SCN from where you initiated HANA One Dev Edition as SCN is heavily used for Dev Edition..
In either case, you should not keep any instance running till you can use it. We strongly recommend to stop the instance while you are not using it or between troubleshooting.
@Gaurav,
We will appreciate an update here. We like to see you are start using SAP HANA One for productive uses immediately.
Thanks and regards,
Swapan

Hana One Addon installation error

I am unable to install the 69 addon to an existing Hana One instance (v 1.00.66.382664). I get the following error.
Install : The Package installation step Data_Backup Failed. Aborting operation
It looks like the logs for this instance are taking a lot of storage, but I can't confirm if that is indeed the issue, and if so, how do I configure those to not accumulate?

We were able to get the updates (69 and 70) to finally install by deleting (through the Backup Editor) all but one of the backup files. So that worked, kind of...
...now, we have the system showing the backups taking 186 GB, when there is only one backup file there and it is only 11GB. I was able to follow this Note ( Help set_retention_date() Procedure ) and set the retention date on log files to 3 days (just a dev system, so no need to really keep them any longer. Is there a way to configure something similar for the data backup files? And to force the cleanup of that diretory? (The Admin guide cautions about going into the directory at the OS level and deleting files as it may corrupt the system.)

HANA One on AWS default username and password for hdbsql having issues

Hello, I am going through the SAP HANA Academy online for the HANA Recommends project, and just getting my HANA instance setup and running through AWS.
In this video: http://youtu.be/P0U-XSnSd1Y
There is a point where the author is showing how to change the password for hdbsql. In order to do this, I need to log into hdbsql first using the default password, and then change it. Unfortunately, I keep getting an error saying that the username or password is incorrect (*10: invalid username or password: SQLSTATE: 28000).
Here are the commands I'm entering into PUTTY:
hdbsql => \c -i 00 -n localhost:30015 -u SYSTEM -p manager
Is the default password different?

Hi Ahmed,
I got the same problem.
To solve it, you can change the password in SAP HANA One Management Console.
Open your browser and put in the public DNS of your HANA box.
Enter your AWS Access Key Id and Secret Access Key
You should have the options to change the password.
For more information, go to
Configuring SAP HANA One | SAP HANA

SAP HANA One and Predictive Analysis Desktop - Time Series Algorithms

I have been working on a Proof-of-Concept project linking the SAP Predictive Analysis Desktop application to the SAP HANA One environment.
I have modeled that data using SAP HANA Studio -- created Analytic views, Hierarchies, etc. -- following the HANA Academy videos. This has worked very well in order to perform the historical analysis and reporting through the Desktop Application.
However, I cannot get the Predictive Analysis algorithms -- specifically the Time Series algorithms -- to work appropriately using the Desktop tool. It always errors out and points to the IndexTrace for more information, but it is difficult to pinpoint the exact cause of the issue. The HANA Academy only has videos on Time Series Algorithms using SQL statements which will not work for my user community since they will have to constantly tweak the data and algorithm configuration.
In my experience so far with Predictive Analysis desktop and the Predictive Algorithms, there is a drastic difference between working with Local .CSV / Excel files and connecting to a HANA instance. The configuration options for using the Time Series Algorithms are different depending upon the data source, which seems to be causing the issue. For instance, when working with a local file, the Triple Exponential Smoothing configuration allows for the specification of which Date field to use for the calculation. Once the data source is switched to HANA, it no longer allows for the Date field to be specified. Using the exact same data set, the Algorithm using the local file works but the HANA one fails.
From my research thus far, everyone seems to be using PA for local files or running the Predictive Algorithms directly in HANA using SQL. I can not find much of anything useful related to combing PA Desktop to HANA.
Does anyone have any experience utilizing the Time Series Algorithms in PA Desktop with a HANA instance? Is there any documentation of how to structure the data in HANA so that it can be properly utilized in PA desktop?
HANA Info:
HANA One Version: Rev 52.1
HANA Version: 1.00.66.382664
Predictive Analysis Desktop Info:
Version: 1.0.11
Build: 708
Thanks in advance --
Brian

Hi,
If you use CSV or XLS data source you will be using Native Algorithm or R
Algorithm in SAP Predictive Analysis.
When you connect HANA, SAP Predictive Analysis uses PAL Algorithm which runs
on HANA server.
Coming to your question regarding difference,
In SAP PA Native Algorithm, we could provide the Data variable, Algorithm
picks the seasonal information from the Data column. Both R and SAP HANA PAL
does not support Date Column. We need configure seasonal information in
Algorithm properties.
R Properties
1) Period : you need to mention the periodicity of the Data
Monthly : (12)
Quarter : (4)
Custom : you can use it for week or Daily or hourly.
2) Start Year: need to mention Start year.
Start year is not used by algorithm for calculating Time series, but it helps
PA to generate Visualization ( Time series chart) by simulating year and
periodicity information.
3) Starting Period:
if your data is Quarterly and you have data recordings from Q2, mention 2 in
start period.
Example.
If the data periodicity is Monthy and my data starts from Feb 1979, we need to provide following information,
Period: 12
Start year: 1979
start Period: 2
PAL Properties. : Same as properties defined in R.
Thanks
Ashok
[email protected]

AWS Hana one Volume usage - Amazon charging

Hi All,
Currently I am having a HANA One AWS instance which I have started 2 weeks back. However when I see my account activity I found amazon is asking a high amount for the storage volume usage. Obviously they allow 30GB free per month but my volume allocation is more than 560GB which is waste as almost nothing is there.
Can anyone suggest me what I should do to avoid being charged so much by amazon? Please advise ASAP.
Regards,
TD

Hi Swapan,
Thanks a lot for responding to my queries. However being on AWS with a pre-configured instance and provision to use it even for personal training is the most useful thing that SAP gave us but this should be categorized in my opinion.
I totally understand the AWS Hana instance is meant primarily for production usage hence the cluster configuration is made like that but this is not at all useful to the guys who use it for training / personal development. The current configuration is using 520GB of storage which is good enough for production usage - or sort of but totally overkill for the training use. The extra cost of this is not mentioned anywhere in SAP(as I see, pardon if I missed anywhere) and should be clearly mentioned in the system. No SAP Video from SAPHANA Academy says the same.
Yes, I am using my Hana instance for my personal usage/training so the cost that extra storage is bothering me - moreover didn't saw this mentioned anywhere.
I would request SAP to let people know how to optimized their storage utilization and save money in instances - meant for training purposes. Further I feel if SAP should consider providing two separate class of SAP HANA One instances - PRD usage/Training Usage and both with diff utilization. (Might be asking too much but I pretty feel there are many guys out in this web forest to utilize this HANA One for personal development)That would be a most effective way and will optimize resource utilization throughout. (A guy blocking 520GB storage for his training is quite overkill and waste of AWS resources)
Please check if you can guide us with this optimization.
Regards,
TD

HANA Studio connection with HANA server in HANA One (Rev 56 and up)

Dear HANA One Customers,
You must be aware of our latest HANA One release with HANA SP6 (blog: The specified item was not found. Once you launch a new instance using HANA One Rev 52.1, you can upgrade your instance to HANA Rev 56 or HANA Rev 62. You can do it in steps (Rev 52 -> Rev 56 -> Rev 62) or do directly (Rev 52 -> Rev 62). By the way, Rev 62 is the first HANA 1.0 SP6 release in HANA One. As we recommended, if you upgrade HANA Version to 56 or 62, please upgrade your HANA Studio and HANA Client to the corresponding version.
If you upgrade to either Rev 56 or Rev 62, you don't need to add any entry to C:\Windows\System32\drivers\etc\hosts to connect HANA Studio to use all the functionality of HANA Studio with HANA in cloud. While HANA One's add-on manager, upgrades. it makes a change in one configuration file (global.ini) for public_hostname_resolution.
However, if you change IP of your HANA One instance, you need to update this parameter which is described in the Quick Start Guide. The steps are summarized as:
In the Administration editor of HANA Studio,
Choose the Configuration tab. A list of all configuration files appears.
Expand the global.ini configuration file
Select the section public_hostname_resolution
Choose Next and enter the values map_hanaserver in the Key field and your IP or public DNS in the Value field.
For example, set the values as Key: map_hanaserver, Value: xx.xx.xx.xx if you use an IP address including an Elastic IP. If you use DNS as the value it could be ec2-xx-xx-xx-xx.compute-1.amazonaws.com
With this new feature, the same HANA Studio can connect to many HANA One instances at the same time which was not possible earlier prior to Rev 56.
Thanks,
Swapan

Yes Aleksandr
I think you are right.
After doing many installation of HANA Server in differrent AWS instances it didn't work for me.
But when I installed the HANA Studio on another machine with more RAM it worked.
I think we have to install HANA Studio on another AWS instance with 16 GB RAM to make it run smoothly.
Thanks & Regards
Manu

SAP hana one on AWS

Hi Experts,
I have launched SAP Hana One on AWS with CC2.8x Large suse linux environment. And configured Hana studio with database user SYSTEM.
My question is that is SAP Hana on on AWS comes with SAP solution (like ECC EHP6 or EHP7) or do we need to install SAP solution seperately?
I can login to OS level thru putty with HDBADM user and i can see /usr/sap/HDB/instance.
Please let me know if SAP Hana one on AWS comes with sap solution then let me know how to launch it with SAP gui
If sap solution not comes with Hana one let me know how to implement sap solution on HAna one AWS.
Thanks,
Krish

Hi Krish,
I'm afraid you have posted your questions in the wrong forum. Please try http://www.saphana.com/community/implement/support-communities/sap-hana-one-support for support on SAP HANA One related questions.
Thanks and Regards,
Bernd

How to check instance alert.log in RAC 10g ASM environment?

i know to use Grid control or OEM check instance alert.log?
But since in ASM the alert.log is not recognized, how to check it in OS level just like regular non-RAC checking?
or the best way to check it ?
thanks a lot!

user620464 wrote:
i know to use Grid control or OEM check instance alert.log?
But since in ASM the alert.log is not recognized, how to check it in OS level just like regular non-RAC checking?
or the best way to check it ?
thanks a lot!Well if you mean that you have put the alert over asm storage than where did it mention to put alert file over ASM? Is not like an o/s where one can go and read the file and surely, neither we need striping or mirroring of it either. I am not sure that there is any way to do so over ASM storage.
HTH
Aman....

SAP HANA One SQL syntax

Hello,
I am using SAP Hana One version 1.00.68.384084 with Spatial capabilities
I have some questions about the SQL syntax to be used for:
     1. Is there a query I could use to check if a table was modified?
     2. What is the syntax to insert spatial data into a table (insert points for instance) and specify the points SRID? By default SRID=0.
     3. How to I alter SRID of a geometry
     4. Which SRID's are supported by Hana?
     5. What UOM(units of measure) are supported by Hana. For instance if I use ST_DISTANCE, what UOM is returned? Could I specify another UOM?
Thank you,
Ovidiu

Ovidiu,
HANA One does not provide any forward looking statement. However, it supported SPS4, SPS5 and SPS6. So, SPS7 will be available in HANA One. When SPS6 was available, a notification went out to all HANA One customers from AWS Marketplace. HANA One team will publicize in this forum and all SPS7 messages including this particular thread so that all interested in SPS7 will receive notifications automatically posting questions here about SPS7.
Thanks,
Swapan

Hello..i use firefox 4 beta 05..my question is..why when i open let's say 6 tabs..my windows show that i have 6 instancies of firefox instead of one like it does with firefox 3.6? thanks

hello..i use firefox 4 beta 05..my question is..why when i open let's say 6 tabs..my windows show that i have 6 instancies of firefox instead of one like it does with firefox 3.6? thanks
maybe i am saying it wrong..when i press alt+tab there is only one firefox open..but in windows 7 in the taskbar..every tab open..appears as another window open

If you are referring to taskbar previews, you can turn them off by modifying a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# In the filter box type '''previews'''
# Double-click on the preference browser.taskbar.previews.enable to change its value to '''false'''

Multiple instances of ECM 11g on one server

I've read a few posts about installing multiple instances of ECM 11g on one server, but I have a few questions. My current set up is
A single Windows 2008 Server R2 server
8 gb RAM
Weblogic 10.3.5
1 install of ECM 11g in the base_domain
Database is Oracle 11.2
I want to add another instance of ECM to this server, but when I went to run the RCU, I was not allowed to use the same prefix for my tablespaces. Is this expected? I'm fine with using a different prefix, I just was surprised to see that I couldn't use the same prefix on this install since I was using a completely different database.
Assuming I use a different prefix... do I just add a new domain for this additional ECM instance? Is there anything else I need to know?
Thank you

I went to run the RCU, I was not allowed to use the same prefix for my tablespaces. Is this expected?Yes. It will create tables with the same name visible for a different database user (thus, the prefix).
do I just add a new domain for this additional ECM instance? Is there anything else I need to know?Actually, I think you can even install more instances to the same domain (this is more a question to Weblogic Server admins - I think there's been some posts recently on this topic). What definitely must be unique, is the port number. If you are OK with using different port numbers for your instances, it should be relatively easy. If you need the same port (e.g. 80 because of proxy limits), there are some ways how to redirect - it that case, two domains might be required.

I cannot install latest itunes to my Sony notebook which is running on traditional chinese windows 7 64-bit, the error message is something like unrecognized windows package, can any one help me or has similar experience? Thanks.

I cannot install latest itunes to my Sony notebook which is running on traditional chinese windows 7 64-bit, the error message is something like unrecognized windows package, can any one help me or has similar experience? Thanks.

iTunes 9.0.x is certainly compatible with Win7 64 bit since I use that exact setup on 3 different PCs. Two suggestions for your installation problems:
1)Download a new copy of the 64 bit installer from Apple then, instead of just running the itunes installer right click on it and try 'run as adminstrator'. In my experience that clears up a world of problems with program installation in Win7 and Vista. This is necessary even if you're already logged in as an administrator.
2) Try the previous version of iTunes (9.0.3). You can get a copy at http://www.oldapps.com/itunes.php?old_itunes=54 again right click on the file and "run as administrator"
Good luck, hope this helps.
Lil

New Feature called "Business Packages" in HANA

Hi Guys,
We just upgraded HANA from version 13 to version 16 now according to what i heard SAP was introducing a new feature "Business Packages" in HANA version 16 but i am unable to find any documentation or information on it.
If anyone has any idea about "Business Packages" ,how do we use them, then please let me know.
Regards,
Sheikh Hassan Ayub

Hi Sheikh,
The Business Packages for HANA are the RDS(Rapid deployment solutions) readily available for quick implementation.
http://service.sap.com/solutionpackages -->In-Memory Computing
RDS is currently available for CRM, ERP and CO-PA scenarios and expected implementation time is 6-8 weeks.
Are you looking for any other thing?
Regards, Rahul

Instance Alerts Package on HANA One

Similar Messages

Maybe you are looking for