Instance color in yellow even after hours

hi
in a common discussion with my friend i was asked a question. that is his systems instance is in yellow colour. even after the system is running since so much time.?
but the instance is in yellow colour
thanks.

Hello,
This could be problem with your kernel, is it possible to upgrade to latest the kernel.
Cheers,
-Sunil

Similar Messages

  • Why is my iphone 4 not turning on, even after hours of charge?

    Why is my iphone 4 not turning on even after hours of charge?

    Try holding both the home and power buttons at the same time until the Apple boot logo appears. If it doesn't appear after 15 seconds, this probably won't work.

  • Hp photosmart 3210 all-in-one - some colors not printing even after changing cartridges.

     I recently had an issue while printing a document. the content was off colored and the error message said black was low. Changed the black cartridge and things just got worse from there. Still no black, cleaned the printheads, printed another test page and no longer had magenta or lt magenta. Replaced those as well. the only had yellow, magenta and lt. magenta.  yellow was low as well, so now every cartridge has been changes.Tried to print document again and it printed in magenta and lt magenta. never have seen black again and the self test diagnostic page is printing in purple. What should be black showed up as purple with lines and yellow is a rainbow of mustard, magentas and purples. no other colors show up. WHAT IS GOING ON? have tried several times to align the printer but it always fails. Have cleaned the printheads several time and just get a mish-mash of colors  (no black) and most of the time no writing. When I try to print in black only, I get nothing.
    What can I do? It worked just fine prior to ink going out.

    Did you get a resolution to your problem?  The same has occured for me - only printing blues/yellows and greens.  Was working fine until I replace the yellow cartridge and then it stopped printing reds.

  • Why did mine stop working a few months ago? The Sys Light flashes red constantly - even after hours of being powered up.

    I bought this last year - early summer. It worked great at first.
    Sometime during the winter it stopped working with a constantly flashing red Sys light. I have tried many times to start it up, same issue even when leaving it powered up for hours. What is my next step in trouble shooting this issue?

    Call Verizon Wireless Customer Service at (800) 922-0204 and verify the device is registered and working properly from there end. Good luck!

  • HT201263 My ipod keeps getting stuck while restoring. There has been no progress on the progress bar even after hours of waiting. Help!

    My ipod touch is having trouble restoring. Ive followed all the steps that have been suggested for restoring trouble shooting.
    I have the latest itunes, tried restoring it on different computers, but it always seems to get stuck when itunes is restoring the ipod.
    The apple icon shows up with the progress bar, but hours later there is still no progress and change in the status. Itunes says waiting for ipod and nothing changes. Im frustrated that nothing seems to help. I really just want to restore it to factory settings so it can work again, I dont even care anymore whether i get any of my old music or photos back. Does anyone have any helpful suggestions? Or know how long it should take to restore?

    Try placing the iPod in recovery mode and then restoreing.
    Next try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • When syncing after recent update, sync is stuck at "Step 4 of 4" "Waiting for changes to be applied" and will not complete, even after hours.  How can this be fixed?

    I completed the most recent software update for both iTunes and iPhone recently.  I am now trying to sync my iPhone to add newly purchased audiobooks and the sync remains stuck at "Step 4 of 4" with the message "Waiting for changes to be applied"  I have tried everything to correct this.  When sync is cancelled a failure to sync message is generated.  Any ideas????

    Alright, so I reset my computer and suddenly it then recovered. Other times it wouldn't recover after resetting the computer, so I have no idea how it happened. I just restarted the computer lots of time and finally it worked.
    Okay, back to square one. Now to transfer music, I tried my previous acknowledgable solutions but they didn't work. The iPod touch does not feature a hard-disk mode, and windows media player doesn't support iPods.
    I've tried multiple programs to transfer music but none of them work properly and keep giving me error codes. So my iPod still gets stuck at Step 4: Waiting for changes to be applied or whatever it said.
    Thanks in advance ._. (Please help)
    p.s - Apple is useless. If I don't get steady answers tomorrow I'm going to end up calling them and get this problem fixed first hand. Second hand? I don't know, over the **** phone.
    juiceb0xk signing out for the night. Bye. >:(

  • Load step in Yellow state even after completion

    Hi people:
    I have a situation here with aprocess chain.
    When the process chain is triggered,there is a load step which stays
    in yellow even after the load completes. We tried to push the step
    forward,but the chain wont progress. So,we had to do the rest of the
    steps in the process chain manually.
    Why does this hangover step happens in the process chains?
    Can some one give a solution to this situation, so that we don't have
    to do the steps manually everytime the chain is struck at the step?
    Any inputs are appreciated.
    Thank you.

    Hi,
    Check the status of the Process Variant in RSPCPROCESSLOG table. If the status of the variant is not 'G' then the process will not move to the next step though the loads complete succesfully.
    In this case you have to change the status to 'Completed' (G)manually.
    This could be done using the Function Module  'RSPC_PROCESS_FINISH'.
    Provide the below details in the FM
    1) I_LOGIN - Login ID of your process variant (you can find this in RSPCPROCESSLOG table)
    2) I_TYPE = CHAIN
    3) I_VARIANT = Your Proces Chain variant (Optional)
    4) I_INSTANCE = Double click on the object which was struck and click on Backg tab. Copy paste the instance.
    4) I_STATE = G.
    Hope this would resolve your issue.
    Regards,
    Anil Pragada

  • Changed (renamed) device name in Intune app on iOS device. This change is not showing up in the admin portal, even after 24 hours

    Hi,
    I am trying to update a mobile devices names.  Initially, I changed the iOS device name (Settings->General->About->Name) and then I also renamed the device in the Intune app on the device.  Neither of these changes are propagating through
    to the admin portal, even after 24 hours.  Is there anything else I should be doing for this to work?
    Thanks in advance for your help.
    Simon.

    I'm seeing the same thing as Simon, I changed the iOS device name in both places on an iOS device and the name in the Intune console is still "iPhone" which is really unhelpful as I'm sure you can imagine.  Is there some other place
    that we should be going to rename devices so they are more easily identifiable in the Intune console?
    Thanks!

  • Lightroom is still not working even after spending several hours on the phone w/ adobe. Suggestions?

    At first, the issue was that we had to type the serial number in every time we used Lightroom. Now, we cannot even get Lightroom to turn on even after typing in our serial number. All we want to do is edit our pictures. How do we get Lightroom to work. I've called adobe a few times and literally spent hours on the phone with them trying different things to get it to work. Still no Lightroom. Any suggestions?

    Which version of Lightroom? Which operating system?

  • I recently connected my iPhone 3GS to my computer, for the new update 3.4.5, but it didn't load at all, not even after 3 hours.. so i tried to disconnect to phone, but the loading meter is still there, like it has frozen, what should I do ?

    I recently connected my iPhone 3GS to my computer, for the new update 3.4.5, but i didn't load at all. Not even after 3 hours..
    so i tried to disconnect the phone, but the loading meter is still there like it's frozen can't push any button or anything at all.. what should i do?

    Restart your iPhone by holding down the on/off and home buttons until your see the Apple logo.

  • Once I push Back up now button I can see the content is backing up on iCloud but even after 10 hours of exercise the content on iPad are not backed up

    To back up my content on iPad, I go to cloud notification and then backup & storage> backup now.
    After connected to Wi-Fi network and power plugged I give backup now command and iPad content seems to me getting backed up but even after 10 hours of exercise I fail to get content backed up on iCloud
    Why so? Am I missing some step to initiate backup now process?
    Please educate me or inform me how to fix this problem

    I found the answer in another discussion group, so I have just erased everything through settings on my new iphone and in Backups on itunes, I have clicked on restore back up. So it appears to be working.

  • HT3964 My computer freezes after running for about 15 min even after setting the energy saving to 3 hours

    My Mac computer freezes after running for 15 min even after seeting the energy saving to 3 hours. Any ideas how to stop the freezing/

    Hi Teodorafrombc,
    Thanks for visiting Apple Support Communities.
    If your computer is becoming unresponsive, you may want to see if specific applications are causing this behavior. Try using the Force Quit menu to check for unresponsive applications:
    Using the Force Quit feature of OS X makes an application close, even when it is not responsive.
    Important: Normally you should not need to force quit an app to close it. When an app is forced to quit, any unsaved changes to open documents are not saved, so try these methods to normally close the app first:
    Choose Quit from the app menu. For example, in Safari, choose Safari > Quit Safari.
    Choose Quit by right-clicking or control-clicking on an app's icon in the Dock
    You can find the article with these steps here:
    OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    If your display is going blank or seems to be going to sleep unexpectedly, try these steps first:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    You can find the article with these steps and more information here:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    If these steps don't resolve the issue, feel free to reply with more information about the symptoms you are experiencing.
    Best,
    Jeremy

  • My macbook wont except my administrator name even after i reset my admin pasword and keychain login password so I am unable to install or make any account changes. Suggestions anyone? I've been at this for hours now....

    My macbook wont except my administrator name even after I reset my admin pasword and keychain login password so I am unable to install or make any account changes. I can't even install any software. Suggestions anyone? I've been at this for hours now....

    Try Resetting the PRAM

  • Only half of the body just below the camera and steel side of camera side is getting heated up just after 10 , 15 mins of usage i my iphone  4 is it normal...as earlier the body was not heating up even after 2 hours....the problem started after updating t

    only half of the body just below the camera and steel side of camera side is getting heated up just after 10 , 15 mins of usage i my iphone  4 is it normal...as earlier the body was not heating up even after 2 hours....the problem started after updating to 6.1.2
    iPhone 4, iOS 6.1.2

    Hi, did you ever solve this problem?
    My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
    It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
    It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
    Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
    Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
    Any help would be much appreciated!!

  • TS1398 Can I still switch the color of my phone even after I bought it?

    Can I still switch the color of my phone even after I bought it?

    How long have you had the phone... Where did you buy it...
    Apples No questions asked return policy is 14 days.

Maybe you are looking for

  • Can I have two separate iTunes accounts on the same computer?

    Can I have two separate iTunes accounts on the same computer?  My wife's music is much different than mine.  Can we have different iTunes libraries to work with on the same computer?

  • SWF not working

    Hi Guys I am working on the project in which I made video gallery using AS 3.0 So far what I have implemented is I have 16 thumbnails containing FLVs. 1 The user can double click on any thumbnails, any number of times. to open as many video panes as

  • Using WHEN-LIST-CHANGED on T-list to navigate block records

    I have a form on which I use a T-List to list all of the child records in a block based on the selected parent record of the form. I am using the T-List almost strictly for navigational purposes (and eventually later for delete purposes as well). Abo

  • Help with partitions and file systems [SOLVED]

    Hi, i have been using Ubuntu for a while, and now i want to move to Arch. I've probed it in a PC and i like so i want to make que change. But, before installing Arch, I have 2 doubts. I red the beginners guide and also the instalation guide. There it

  • Missing feature in FF4

    There is a missing feature in FF4... the nifty little search icon which usually appears after highlighting text is missing, this feature is very useful which I can do copy or search the dictionary for the highlighted text and so on. If this feature d