Instance is IDLE , please help

Hi,
Our junior DBA execute this command “alter system set sga_max_size=2000M scope=spfile;”
Now instance is in idle state, how we can manually change this parameter in order to start our instance again .
Thanks

Faheem,
With "idle" state, do you mean by that you are getting the message, "connected to idle instance" is it? if this is the case,there may be two things. One , your database is down means that your you have your db shutdown and needs to be restarted. The other reason could be that you are setting and trying to start a wrong instance. You may need to check back that whether a corrected sid is used or not?
To change this parameter, while being on the idle state, you can create the pfile from the spfile and in that, you can edit this parameter manually.
Issue this command while being inthe idle state,
create pfile from spfile;This would create a pfile in the $OH/dbs folder(in unix) or $OH/database(in windows). Edit that file for the said parameter and restart db with this pfile.
HTH
Aman....

Similar Messages

I updated Firefox and the extensions and keep getting "restart firefox for changes to take effect." Even after restarting, none of the add-ons actually update and do not appear, for instance, noscript. Please help!

There are a bunch of add-ons that recently were updated, including noscript, adblock, etc. These add-ons were updated successfully and say in the add-on window they will be installed the next time Firefox restarts. There's also a bar that says "restart firefox now" and even when clicking restart firefox, none of the updates seem to load. I had to manually download the noscript the last time to get it to work but alas with the latest update, again, same problems. i tried disabling other plugins with no impact either. Anyone else having a similar problem and does anyone know how to get this resolved?

Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the "Find Updates" button (in Firefox 4: right-click the extension -> "Find Updates") to do a compatibility check.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3

Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton

I downloaded FF 4 and now 5 and with neither my screen looks nothing like it shows on the FF page. For instance, I do not have the orange FF tab in the upper left corner, I have no option of "pin as app" nor do I have Panorama. Can someone please help me?

I downloaded FF 4 and now 5 and with neither my screen looks nothing like it shows on the FF page. For instance, I do not have the orange FF tab in the upper left corner, I have no option of "pin as app" nor do I have Panorama. Can someone please help me?

To get the orange FF tab, go to View > Toolbars > Menu Bar. This should uncheck the menu bar and give you the orange button.
Panorama is a box made of 4 grey rectangles that should be on the far right, if it isn't after you enable the orange FF tab, right click on anywhere on a tool bar that doesn't have anything on it, and you should get a menu with a list of your tool bars that you can check and uncheck. go down to customize at the very bottom and it will open a window with all your buttons. Find the panorama/tab groups button and drag it onto the tool bar of your choice.
to pin a tab as an app, right click on it; it's an option in the right-click menu.

My iPhone 4 was stolen, how do i lock it permanently using a serial number for instance so nobody can use it or access my personal information, knowing that the thief knows my personal passcode.. Please help, Thanx

My iPhone 4 was stolen, how do i lock it permanently using a serial number for instance so nobody can use it or access my personal information, knowing that the thief knows my personal passcode.. Please help, Thanx

You cannot lock it by the serial number. Report it to your carrier and the police. You said that the thief knows your pass code. Does that mean that the thief was a personal friend who would be close enough to you to know what your code was? If that is the case, ask your friend to return your phone.

Please help with Instance Manager

Hello,
I created a button that will show/hide a subform. The issue is I need multiple buttons like this. I thought changing the name of the subform in this script would allow me to use another button for a different subform. For instance, Instead of using the word Alabama I could replace it with Alaska and it would show/hide that subform. Could having multiple pages in a subform affect its functionality? Please Help!
// Invoke the Instance Manager to add and remove the alabama subform.
if (fAlabama.value == "0") { // fAlabama is a document variable used as a flag.
// fAlabama = 1 when the alabama subform is displayed.
_alabama.setInstances(1); // Add the comments subform.
this.resolveNode("caption.value.#text").value = "Clear Alabama"; // Change the button's caption.
fAlabama.value = "1"; // Set the flag value.
else {
_alabama.setInstances(0); // Remove the alabama subform.
this.resolveNode("caption.value.#text").value = "Add Alabama"; // Change the button's caption.
fAlabama.value = "0"; // Reset the flag value.
Thanks,
Venus

When you say you are not in standalone mode, I assume you are connecting to an Oracle Management Server which is running somewhere in your network. You need to discover your node. To do this you must start the intelligent agent on the server where you have your database. Then from the OEM console select navigator from the menu bar, and then discover nodes. Next enter the name of your server. OEM will attempt to contact the intelligent agent on that server in order to get the database information.

Statspack Problem(Please Help)

Hi,
I got the below error from Statspack report run. It runs after every one hour and the database version is 9.2.0.8. Please help how to resolve it.
ERROR: Database/Instance does not exist in STATS$DATABASE_INSTANCE
ERROR: Begin Snapshot Id specified does not exist for this database/instance
ERROR: End Snapshot Id specified does not exist for this database/instance
WARNING: timed_statitics setting changed between begin/end snaps: TIMINGS ARE IN
VALID
ERROR: Snapshots chosen span an instance shutdown: RESULTS ARE INVALID
ERROR: Session statistics are for different sessions: RESULTS NOT PRINTED
begin
ERROR at line 1:
ORA-20100: Missing Init.ora parameter db_block_size
ORA-06512: at "PERFSTAT.STATSPACK", line 727
ORA-06512: at "PERFSTAT.STATSPACK", line 1126
ORA-06512: at line 2
STATSPACK report for
DB Name DB Id Instance Inst Num Release Cluster Host
:ela := ;
ERROR at line 4:
ORA-06550: line 4, column 17:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
The symbol "null" was substituted for ";" to continue.
ORA-06550: line 6, column 16:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev su
Cache Sizes (end)
~~~~~~~~~~~~~~~~
Buffer Cache: M Std Block Size: K
Shared Pool Size: M Log Buffer: K
Load Profile
~~~~~~~~~~~ Per Second Per Transaction
Redo size:
Logical reads:
Block changes:
Physical reads:
Physical writes:
User calls:
Parses:
Hard parses:
Sorts:
Logons:
Executes:
Transactions:
% Blocks changed per Read: Recursive Call %:
Rollback per transaction %: Rows per Sort:
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: Redo NoWait %:
Buffer Hit %: In-memory Sort %:
Library Hit %: Soft Parse %:
Execute to Parse %: Latch Hit %:
Parse CPU to Parse Elapsd %: % Non-Parse CPU:
SGA Memory Summary for DB: Instance: Snaps: 23410 -23412
SGA regions Size in Bytes
sum
End of Report
UNDO Usage
Free space in GB 29.52
USED space in GB 75.2
TEMP_TABLESPACE MB_TOTAL MB_USED MB_FREE
TEMP 208162 6 208156
WHS_CUBES_TEMP 33000 0 33000
WHS_VIEWER_TEMP 67688 0 67688
HP-UX eesci007 B.11.11 U 9000/800 08/18/10
04:00:44 %usr %sys %wio %idle
04:00:49 57 29 13 2
04:00:54 57 24 17 2
04:00:59 57 29 11 2
04:01:04 54 31 13 3
04:01:09 51 33 13 3
Average 55 29 14 2
procs memory page faults cpu
r b w avm free re at pi po fr de sr in sy cs us sy id
5 6

user605926 wrote:
Hi,
I got the below error from Statspack report run. It runs after every one hour and the database version is 9.2.0.8. Please help how to resolve it.
ERROR: Database/Instance does not exist in STATS$DATABASE_INSTANCE
ERROR: Begin Snapshot Id specified does not exist for this database/instance
ERROR: End Snapshot Id specified does not exist for this database/instance
WARNING: timed_statitics setting changed between begin/end snaps: TIMINGS ARE IN
VALID
ERROR: Snapshots chosen span an instance shutdown: RESULTS ARE INVALID
ERROR: Session statistics are for different sessions: RESULTS NOT PRINTED
begin
ERROR at line 1:
ORA-20100: Missing Init.ora parameter db_block_size
ORA-06512: at "PERFSTAT.STATSPACK", line 727
ORA-06512: at "PERFSTAT.STATSPACK", line 1126
ORA-06512: at line 2
You might want to take a look at the docs: http://download.oracle.com/docs/cd/B10500_01/server.920/a96533/statspac.htm#21708
Note:
It is not correct to specify begin and end snapshots where the begin snapshot and end snapshot were taken from different instance startups. In other words, the instance must not have been shutdown between the times that the begin and end snapshots were taken.
At the first part of the report the database id is given. Do a select * from STATS$DATABASE_INSTANCE and verify that the DBID present matches the database/instance you are attempting to run the reprot upon. The report should be ran from the same instance in which the snapshots were taken.

Starting instance in idle mode (10gR2 on Windows Vista)

Hi!
I was wondering how I can initially start an Oracle instance in idle mode. Currently, I can only open the database, then connect as sys with sqlplus and shutdown the database.
Here's what I do:
1.) Start the TNS Windows service.
2.) Start the "OracleService<SID>" Windows service. Otherwise I can't even connect with sqlplus, but starting this service buts the database in open mode already.
3.) Connect with sqlplus and execute shutdown.
Is there a way to start the "OracleService<SID>" Windows service but keeping the instance in idle mode directly?
Thanks for your help,
Marcus
Edited by: MMarcus on Nov 20, 2008 10:16 AM

Hi Marcus
Please be informed of that (source is from the great Burleson site, thanks guys!)
check the Win service:
Open the registry with regedit. Always back up the registry before making changes. Navigate to the key:
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\oracle_home_name.
There will be a key called:
ORA_SID_AUTOSTART. SID is your database SID.
This key should be set to TRUE. If not the server starts but does not start the database. There is also an ORA_SID_SHUTDOWN which you want to be TRUE so that if the server is shut down the service will shutdown the database.
If you want to manually start the database set ORA_SID_AUTOSTART to FALSE. The service will start but not the database.
You can manage the windows service with oradim
Please read that for much more information :
http://download.oracle.com/docs/cd/B19306_01/win.102/b14304/create.htm#i1006533
Hope this helps you.

Please help me moving devlopment datbase to testing database

1)Createdservice jee using oradim
2) Copied all the oracle10g oradata folder from one windows server and pasted in another server in the jee folder
3)
edit the init.ora file
changed db_name and controlfile location etc..
Note: both server oracle10g database installed
C:\Documents and Settings\Rajeevan.p>set oracle_sid=jee
C:\Documents and Settings\Rajeevan.p>sqlplus /nolog
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Apr 7 16:11:11 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL> connect / as sysdba;
Connected to an idle instance.
SQL> startup nomount pfile='F:\jee\Testinit.ora'
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145750508 bytes
Database Buffers 25165824 bytes
Redo Buffers 262144 bytes
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01507: database not mounted
SQL> alter database mount;
alter database mount
ERROR at line 1:
ORA-00205: error in identifying controlfile, check alert log for more info
please help me on this

My init.ora file
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=jee
# Diagnostics and Statistics
background_dump_dest=F:\jee
core_dump_dest=F:\jee
user_dump_dest=F:\jee
# File Configuration
control_files=("F:\jee\control01.ctl", "F:\jee\control02.ctl", "F:\jee\control03.ctl")
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.0.0.0.0
# Pools
java_pool_size=50331648
large_pool_size=8388608
shared_pool_size=83886080
# Processes and Sessions
processes=150
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=testXDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
Now I am getting this error
ORACLE instance shut down.
SQL> connect / as sysdba;
Connected to an idle instance.
SQL> startup nomount pfile='F:\jee\Testinit.ora';
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145750508 bytes
Database Buffers 25165824 bytes
Redo Buffers 262144 bytes
SQL> alter database mount;
alter database mount
ERROR at line 1:
ORA-00201: controlfile version 10.1.0.2.0 incompatible with ORACLE version
10.0.0.0.0
ORA-00202: controlfile: 'F:\JEE\CONTROL01.CTL'

Cisco SIP Phone 9971 won't register on CME 8.6 or 8.5 Please HELP

Please help me , I have problem with registering Cisco SIP phone 9971 with CME 8.6 on ISR 2901.
I configured CME for SIP clients, then I add configuration for 9971 phone and create profiles. Phone downloaded SEP...xml file from CME,after that phone look for g4-tones.xml and gd-sip.jar files, I added them to CME after that phone downloaded them and reboot. Now phone is stuck in some kind of loop and does not register on CME.
On phone log I can see repeting next few messeges.
12:01:58a No DNS Server IP
12:01:59a Updating Trust list
12:01:59a No Trust List instaled
12:01:59a SEP04C5AB03B0D.cnf.xml (TFTP) // at this time phone download SEP...xml file from CME
12:02:00a VPN Error: VPN is not Configured
on CME if issue DEBUG TFTP EVENTS i receive next few lines
*Aug 18 18:20:19.891: TFTP: Looking for CTLSEP04C5A4B03B0D.tlv
*Aug 18 18:20:19.987: TFTP: Looking for ITLSEP04C5A4B03B0D.tlv
*Aug 18 18:20:20.083: TFTP: Looking for ITLFile.tlv
*Aug 18 18:20:20.347: TFTP: Looking for SEP04C5A4B03B0D.cnf.xml
*Aug 18 18:20:20.351: TFTP: Opened flash:/SEP04C5A4B03B0D.cnf.xml, fd 14, size 4585 for process 141
*Aug 18 18:20:20.363: TFTP: Finished flash:/SEP04C5A4B03B0D.cnf.xml, time 00:00:00 for process 141
here you can see verison info of CME
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 24-Mar-11 15:31 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)
ELTOSAN_ROUTER uptime is 1 hour, 50 minutes
System returned to ROM by reload at 16:29:20 UTC Thu Aug 18 2011
System image file is "flash:/c2900-universalk9-mz.SPA.151-4.M.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
Cisco CISCO2901/K9 (revision 1.0) with 471040K/53248K bytes of memory.
Processor board ID FGL1508252Y
3 Gigabit Ethernet interfaces
2 terminal lines
1 Virtual Private Network (VPN) Module
4 Voice FXO interfaces
4 Voice FXS interfaces
1 Internal Services Module (ISM) with Services Ready Engine (SRE)
   Survivable Remote Site Voicemail (SRSV) on Cisco Unity Express (CUE) 8.5.1 in slot/sub-slot 0/0
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
254464K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device#   PID                   SN
*0        CISCO2901/K9          xxxxxxxxxxxxx
Technology Package License Information for Module:'c2900'
Technology    Technology-package          Technology-package
              Current       Type          Next reboot
ipbase        ipbasek9      Permanent     ipbasek9
security      securityk9    Permanent     securityk9
uc            uck9          Permanent     uck9
data          None          None          None
Configuration register is 0x2102
this is RUNNING CONFIGURATION
! Last configuration change at 16:10:12 UTC Thu Aug 18 2011
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname ELTOSAN_ROUTER
boot-start-marker
boot system flash:/c2900-universalk9-mz.SPA.151-4.M.bin
boot-end-marker
no aaa new-model
no ipv6 cef
ip source-route
no ip routing
no ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.5.1 192.168.5.10
ip dhcp excluded-address 192.168.5.200 192.168.5.255
ip dhcp pool phone
   network 192.168.5.0 255.255.255.0
   default-router 192.168.5.251
   option 150 ip 192.168.5.251
ip dhcp pool data
   relay source 192.168.2.0 255.255.255.0
   relay destination 192.168.2.201
multilink bundle-name authenticated
crypto pki token default removal timeout 0
voice-card 0
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
fax protocol pass-through g711alaw
sip
registrar server expires max 3600 min 120
voice register global
mode cme
source-address 192.168.5.251 port 5060
max-dn 6
max-pool 6
load 9971 sip9971.9-1-1SR1.loads
authenticate register
tftp-path flash:
create profile sync 0005135312289902
voice register dn 1
number 207
allow watch
name GossaVM
label 207
voice register dn 3
number 101
name Dejan
label 101
mwi
voice register pool 1
id mac 000C.29C5.0011
number 1 dn 1
dtmf-relay sip-notify
username testvm password testera
codec g711alaw
voice register pool 3
id mac 04C5.A4B0.3B0D
type 9971
number 3 dn 3
presence call-list
dtmf-relay rtp-nte
username dejan password 1234
codec g711alaw
no vad
license udi pid CISCO2901/K9 sn xxxxxxxxxxxx
hw-module ism 0
hw-module pvdm 0/0
redundancy
interface GigabitEthernet0/0
description INTERFACE INTERNAL
no ip address
no ip route-cache
duplex auto
speed auto
no mop enabled
interface GigabitEthernet0/0.2
description LAN DATA
encapsulation dot1Q 2
ip address 192.168.2.251 255.255.255.0
no ip route-cache
interface GigabitEthernet0/0.5
description LAN VOICE
encapsulation dot1Q 5
ip address 192.168.5.251 255.255.255.0
no ip route-cache
interface ISM0/0
no ip address
no ip route-cache
shutdown
!Application: SRSV-CUE Running on ISM
interface GigabitEthernet0/1
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
interface ISM0/1
description Internal switch interface connected to Internal Service Module
shutdown
interface Vlan1
no ip address
no ip route-cache
shutdown
ip forward-protocol nd
no ip http server
no ip http secure-server
snmp-server community public RO
tftp-server flash:dkern9971.100609R2-9-1-1SR1.sebn alias dkern9971.100609R2-9-1-1SR1.sebn
tftp-server flash:kern9971.9-1-1SR1.sebn alias kern9971.9-1-1SR1.sebn
tftp-server flash:rootfs9971.9-1-1SR1.sebn alias rootfs9971.9-1-1SR1.sebn
tftp-server flash:sboot9971.031610R1-9-1-1SR1.sebn alias sboot9971.031610R1-9-1-1SR1.sebn
tftp-server flash:skern9971.022809R2-9-1-1SR1.sebn alias skern9971.022809R2-9-1-1SR1.sebn
tftp-server flash:sip9971.9-1-1SR1.loads alias sip9971.9-1-1SR1.loads
tftp-server flash:United_States/g4-tones.xml
tftp-server flash:English_United_States/gd-sip.jar
control-plane
voice-port 0/0/0
voice-port 0/0/1
voice-port 0/0/2
voice-port 0/0/3
voice-port 0/1/0
voice-port 0/1/1
voice-port 0/1/2
voice-port 0/1/3
mgcp profile default
gatekeeper
shutdown
line con 0
line aux 0
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password jebiga
login
transport input all
end
I did not have any kind of problem with X-LITE to register to CME. also try with few SCCP phones 7940 and I did not any kind of problem .
this is content of SEP....xml file for 9971
<device>
<deviceProtocol>SIP</deviceProtocol>
<devicePool>
<dateTimeSetting>
<dateTemplate>M/D/YA</dateTemplate>
<timeZone>Pacific Standard/Daylight Time</timeZone>
<ntps>
<ntp priority="0">
<name>0.0.0.0</name>
<ntpMode>unicast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<sipPort>5060</sipPort>
</ports>
<processNodeName>192.168.5.251</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
</devicePool>
<sipProfile>
<sipProxies>
<registerWithProxy>true</registerWithProxy>
</sipProxies>
<sipCallFeatures>
<cnfJoinEnabled>true</cnfJoinEnabled>
<localCfwdEnable>true</localCfwdEnable>
<callForwardURI>service-uri-cfwdall</callForwardURI>
<callPickupURI>service-uri-pickup</callPickupURI>
<callPickupGroupURI>service-uri-gpickup</callPickupGroupURI>
<callHoldRingback>2</callHoldRingback>
<semiAttendedTransfer>true</semiAttendedTransfer>
<anonymousCallBlock>2</anonymousCallBlock>
<callerIdBlocking>2</callerIdBlocking>
<dndControl>2</dndControl>
<remoteCcEnable>true</remoteCcEnable>
</sipCallFeatures>
<sipStack>
<remotePartyID>true</remotePartyID>
</sipStack>
<sipLines>
<line button="1" lineIndex="1">
<featureID>9</featureID>
<featureLabel></featureLabel>
<proxy>USECALLMANAGER</proxy>
<port>5060</port>
<name></name>
<displayName></displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>dejan</authName>
<authPassword>1234</authPassword>
<sharedLine>false</sharedLine>
<messagesNumber></messagesNumber>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>true</callerNumber>
<redirectedNumber>true</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
<line button="2" lineIndex="2">
<featureID>9</featureID>
<featureLabel>101</featureLabel>
<proxy>USECALLMANAGER</proxy>
<port>5060</port>
<name>101</name>
<displayName>Dejan Rakic</displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>dejan</authName>
<authPassword>1234</authPassword>
<sharedLine>false</sharedLine>
<messagesNumber></messagesNumber>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>true</callerNumber>
<redirectedNumber>true</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
</sipLines>
<enableVad>true</enableVad>
<preferredCodec>g711alaw</preferredCodec>
<dialTemplate></dialTemplate>
<kpml>1</kpml>
<phoneLabel></phoneLabel>
<stutterMsgWaiting>2</stutterMsgWaiting>
<disableLocalSpeedDialConfig>true</disableLocalSpeedDialConfig>
<dscpForAudio>184</dscpForAudio>
<dscpVideo>136</dscpVideo>
</sipProfile>
<commonProfile>
<phonePassword>1234</phonePassword>
<callLogBlfEnabled>2</callLogBlfEnabled>
</commonProfile>
<featurePolicyFile>featurePolicyDefault.xml</featurePolicyFile>
<loadInformation>sip9971.9-1-1SR1.loads</loadInformation>
<vendorConfig>
</vendorConfig>
<commonConfig>
<videoCapability>0</videoCapability>
<ciscoCamera>0</ciscoCamera>
</commonConfig>
<sshUserId>dejan</sshUserId>
<sshPassword>1234</sshPassword>
<userId></userId>
<phoneServices>
<provisioning>2</provisioning>
<phoneService type="1" category="0">
<name>Missed Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/MissedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="1" category="0">
<name>Received Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/ReceivedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="1" category="0">
<name>Placed Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/PlacedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="2" category="0">
<name>Voicemail</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/Voicemail</url>
<vendor></vendor>
<version></version>
</phoneService>
</phoneServices>
<versionStamp>0131511014412102</versionStamp>
<userLocale>
<name>English_United_States</name>
<langCode>en</langCode>
</userLocale>
<networkLocale>United_States</networkLocale>
<networkLocaleInfo>
<name>United_States</name>
</networkLocaleInfo>
<authenticationURL></authenticationURL>
<directoryURL></directoryURL>
<servicesURL>http://192.168.5.251:80/CMEserverForPhone/serviceurl</servicesURL>
<dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
<dscpForCm2Dvce>96</dscpForCm2Dvce>
<transportLayerProtocol>2</transportLayerProtocol>
</device>

Hello,
I'm facing exactly the same problem, that is:
a Cisco SIP Phone 9971 won't register on CME 8.6 running on a 2811
I have read all the postings to this Forum, but I have not been able to solve it.
In my case the commands voice register dn and voice register pool are OK.
So frankly, I have no idea what I could be missing.
I'm pasting the Router's config.
I hope somebody is able to point me in the right direction.
Here is the config. Thank you!
C2811#sh run
Building configuration...
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname C2811
no aaa new-model
dot11 syslog
ip source-route
ip cef
ip dhcp excluded-address 172.25.140.1 172.25.140.10
ip dhcp excluded-address 172.35.140.1 172.35.140.10
ip dhcp pool Data
network 172.25.140.0 255.255.255.0
default-router 172.25.140.1
option 150 ip 172.25.140.1
dns-server 172.25.140.1
ip dhcp pool Voice
network 172.35.140.0 255.255.255.0
default-router 172.35.140.1
option 150 ip 172.35.140.1
dns-server 172.35.140.1
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
voice service voip
allow-connections sip to sip
sip
registrar server expires max 3600 min 120
voice register global
mode cme
source-address 172.25.140.1 port 5060
max-dn 40
max-pool 42
load 9971 sip9971.9-4-1-9.loads
authenticate register
authenticate realm cisco
tftp-path flash:
create profile sync 0004820400584603
voice register dn 1
number 1010
allow watch
name Phone10
label Phone10
mwi
voice register pool 1
id mac 189C.5DB6.BD09
type 9971
number 1 dn 1
presence call-list
dtmf-relay rtp-nte
username adm password adm
call-forward b2bua busy 68600
codec g711ulaw
no vad
camera
video
voice-card 0
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1879153754
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1879153754
revocation-check none
rsakeypair TP-self-signed-1879153754
crypto pki certificate chain TP-self-signed-1879153754
certificate self-signed 01
(details ommited)
license udi pid CISCO2811 sn FTX1146A44H
username admin privilege 15 password 0 admin
redundancy
interface FastEthernet0/0
no ip address
duplex auto
speed auto
interface FastEthernet0/0.25
description Data VLAN
encapsulation dot1Q 25
ip address 172.25.140.1 255.255.255.0
interface FastEthernet0/0.35
description Voice VLAN
encapsulation dot1Q 35
ip address 172.35.140.1 255.255.255.0
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
tftp-server flash:P00308010200.bin
tftp-server flash:P00308010200.sbn
tftp-server flash:P00308010200.sb2
tftp-server flash:P00308010200.loads
tftp-server flash:SCCP42.9-3-1SR3-1S.loads
tftp-server flash:apps42.9-3-1ES19.sbn
tftp-server flash:cnu42.9-3-1ES19.sbn
tftp-server flash:cvm42sccp.9-3-1ES19.sbn
tftp-server flash:dsp42.9-3-1ES19.sbn
tftp-server flash:jar42sccp.9-3-1ES19.sbn
tftp-server flash:term42.default.loads
tftp-server flash:term62.default.loads
tftp-server flash:SCCP45.9-3-1SR3-1S.loads
tftp-server flash:apps45.9-3-1ES19.sbn
tftp-server flash:cnu45.9-3-1ES19.sbn
tftp-server flash:cvm45sccp.9-3-1ES19.sbn
tftp-server flash:dsp45.9-3-1ES19.sbn
tftp-server flash:jar45sccp.9-3-1ES19.sbn
tftp-server flash:term45.default.loads
tftp-server flash:term65.default.loads
tftp-server flash:/Ringtones/Ringlist.xml alias Ringlist.xml
tftp-server flash:/Ringtones/DistinctiveRingList.xml alias DistinctiveRingList.x
ml
tftp-server flash:sip9971.9-4-1-9.loads
tftp-server flash:kern9971.9-4-1-9.sebn
tftp-server flash:rootfs9971.9-4-1-9.sebn
tftp-server flash:dkern9971.100609R2-9-4-1-9.sebn
tftp-server flash:sboot9971.031610R1-9-4-1-9.sebn
tftp-server flash:skern9971.022809R2-9-4-1-9.sebn
tftp-server flash:/g4-tones.xml alias United_States/g4-tones.xml
tftp-server flash:/gd-sip.jar alias English_United_States/gd-sip.jar
control-plane
mgcp profile default
telephony-service
max-ephones 24
max-dn 48
ip source-address 172.25.140.1 port 2000
cnf-file location flash:
load 7960-7940 P00308010200
load 7942 SCCP42.9-3-1SR3-1S.loads
load 7945 SCCP45.9-3-1SR3-1S.loads
load 7962 SCCP42.9-3-1SR3-1S.loads
load 7965 SCCP45.9-3-1SR3-1S.loads
max-conferences 8 gain -6
dn-webedit
transfer-system full-consult
create cnf-files version-stamp 7960 Feb 11 2014 07:18:32
ephone-dn 1
number 1001
description Phone 1
name Phone 1
hold-alert 30 originator
ephone-dn 2
number 1002
description Phone 2
name Phone 2
hold-alert 30 originator
ephone-dn 3
number 1003
description Phone 3
name Phone 3
hold-alert 30 originator
ephone 1
device-security-mode none
mac-address 001C.58FB.6E0F
button 1:1
ephone 2
device-security-mode none
mac-address 0014.A981.7F8A
button 1:2
ephone 3
device-security-mode none
mac-address 0006.5356.A4B8
button 1:3
alias exec con conf t
alias exec sib show ip int brief
alias exec srb show run | b
alias exec sri show run int
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
line vty 5 15
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
scheduler allocate 20000 1000
ntp master 1
end
C2811#

Cannot install windows, starting to get really pissed off with this PLEASE HELP

ok, i'm starting to get agitated with this.
i cannot install windows XP, 2003, OR Longhorn on my machine.
right now, i have the following setup:
msi 865pe neo2 motherboard
intel p4 3.2ghz w/HT (factory HS/Fan currently)
1 dimm of PC3200 crucial DDR400
30GB maxtor HD plugged into primary IDE
pioneer dvd/cd drive as sencondary IDE
alps 3.5" floppy drive
antec true blue 480wt PSU
i do the following:
format with maxtor cd
boot from OS cd
start setup, reboot, continue
the farthest i can get is 'registering components/completing installation' i either get a blue screen stop error which isnt the same everytime, or it just locks up and doesnt do anything.
ran the memtest checker and get errors on test #4
i had a DIMM of kingston that gave the same errors, so i RMA'd it and got another. same errors, so i RMA'd again and got a Crucial stick. same errors.
so i RMA'd the motherboard since i figured it had to be that. and it improved from the problems i had earlier. (the problems i had before were worse before.)
below are my BIOS settings. SOMEONE WHO KNOWS PLEASE HELP ME!
advanced bios features:
quick boot - enabled
boot order - floppy, cd, HDD
full logo - disabled
s.m.a.r.t - enabled
num-lock on boot - enabled
floppy swap - disabled
floppy seek - enabled
save rom to HD - no
boot to os/2 - no
hyper threading - disabled
mps revision - 1.4
apic acpi sci irq - disabled
cpu l1 & l2 cache - enabled
bios cacheable - disabled
c000, 32k shadow - disabled
advanced chipset:
dram timing...
configure by spd - enabled
(i dont know what to set timing to, nothing anyone has since said helps)
integrated perfs:
usb controller - enabled (same errors if its disabled too so its not USB)
usb device legacy support - disabled
on chip IDE:
operate mode - legacy mode
ata config - pata only
sata keep enabled - yes (for sata drive i have, error either way)
pata channel selection - both
onboard ethernet, 1394, prmoise ide and audio all DISABLED
pc healt status:
cpu - 49°C/120°F (idle sitting in bios)
system temp - 28°C/82ºF
cpu fan - 2678rpm
nb fan speed - 6490rpm
vcore - 1.456 up to 1.502
3.3v - 3.232v
+5.0v - 5.003v
+12v - 11.680v
-12v - -11.743v
-5.0v - -4.826v
battery - 2.896v
+5V SB - 4.945
freq/voltage control
Dynamic OC - disabled
cpu ratio locked
dram freq - auto
spread spectrum - enabled
cpu bus clock - 200
ddr clock (grayed out) - 400
adjust agp/pci - 66.66/33.33
cpu vcore adjust - no
cpu vcore (grayed out) - 1.5500v
ddr power voltage - 2.65v
agp power voltage - 1.50v
SOMEONE PLEASE HELP ME!!!!!
i'm running out of time, money, patience.
if it cant be solved i'm going to set myself on fire!

Quote
Originally posted by REILLY875
Do NOT try the 250 Watt PSU!!, As "Wonk" said if you happen to Blow it, the PSU will most likely Take out the Mo-Bo with it! And maybe the CPU to, due to the Voltage Spike you would get ...I would not put to much Credence into the fact that as of now the +12V and the +3.3V Rails are reading a little low,(I say this because it is indeed a ANTEC), as this could be the Monitoring Hardware, or the Software that might be reading wrong....If I where you I would First set the Memory Timings Manually to 3-4-4-7-8, And up the DRAM (VDIMM) Voltage to 2.7 Volts, and if it still wont Load, I would Definitly try a different DIMM Slot, and Rince and Repeat .....If you dont mind me asking , Why are you running with just 1 Module?....Is it on purpose or are you saving up for More?................Sean REILLY875
yea, i dont plan to run the 250. im gonna wait for the new 480.
thanks for the info about ram timings as well. i havnt gotten any solid answers about what to set it to.
even with new mobo and ram, i'm getting errors in memtest86 #4 test as i always have. i've tried different slots with same problems.
i only have one module because i dont want to waste anymore money on a non-working system. once i get it up and running i'll add another 512.

ICloud connection error, iTunes Store not loading, update server not responding. Please Help.

Please Help! I am in desperate need to access my email. Thank you.
whenever I sign in iCloud, this happens:
APPLICATION NAME
cloudos
ERROR
authDidNotConnect
TYPE
server
APP STATECHART
SC.Statechart:sc915
initialized: true
name: cloudos-statechart
current-states: [
    active.authUI.fieldsEditable
state-transition:
    active: false
    suspended: false
handling-event: false
BUILD NUMBER
14C.131409
TIME
Fri May 02 2014 21:03:39 GMT+1000 (EST)        (1399028619503)
HOST
www.icloud.com
USER AGENT
Mozilla/5.0 (Macintosh; Intel Mac OS X 10.9; rv:28.0) Gecko/20100101 Firefox/28.0
ENVIRONMENT
PROD
RECENT LOG MESSAGES
Fri, 02 May 2014 10:22:58 GMT: DEBUG: SC.Module: Attempting to load 'cloudos_foundation/springboard'
Fri, 02 May 2014 10:22:58 GMT: DEBUG: SC.Module: Module 'cloudos_foundation/springboard' already loaded.
Fri, 02 May 2014 10:22:58 GMT: DEBUG: SC.Module: Evaluating JavaScript for module 'cloudos_foundation/springboard'.
Fri, 02 May 2014 10:22:58 GMT: DEBUG: CloudOS.main() already has localized strings, proceeding to run CloudOS.run() now.
Fri, 02 May 2014 10:22:58 GMT: DEBUG: Loading localized strings and metrics
Fri, 02 May 2014 10:22:58 GMT: DEBUG: --> Request 1:   GET to /applications/pages/current/info.json, headers: Content-Type=text/plain, body: (omitted)
Fri, 02 May 2014 10:22:58 GMT: DEBUG: --> Request 2:   GET to /applications/numbers/current/info.json, headers: Content-Type=text/plain, body: (omitted)
Fri, 02 May 2014 10:22:58 GMT: DEBUG: --> Request 3:   GET to /applications/keynote/current/info.json, headers: Content-Type=text/plain, body: (omitted)
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: BEGIN initialize statechart
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: BEGIN gotoState: __ROOT_STATE__
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: starting from current state: ---
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states before: ---
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: --> entering state: __ROOT_STATE__
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: --> entering state: loading
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states after: loading
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: END gotoState: __ROOT_STATE__
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: BEGIN gotoState: validatingAuth
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: starting from current state: loading
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states before: loading
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: pivot state = __ROOT_STATE__
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: <-- exiting state: loading
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: --> entering state: validatingAuth
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: --> entering state: validatingAuth.gettingReply
Fri, 02 May 2014 10:22:58 GMT: DEBUG: COS: Sending validate POST request to https://setup.icloud.com/setup/ws/1/validate
Fri, 02 May 2014 10:22:58 GMT: DEBUG: --> Request 4:   POST to https://setup.icloud.com/setup/ws/1/validate?clientBuildNumber=14C.131409&client Id=CA53A6CC-FA79-4150-AF39-248318487608, headers: Content-Type=text/plain, body: (omitted)
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states after: validatingAuth.gettingReply
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: END gotoState: validatingAuth
Fri, 02 May 2014 10:22:58 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: END initialize statechart
Fri, 02 May 2014 10:22:58 GMT: DEBUG: Language check: null -> en-us. We WILL relocalize.
Fri, 02 May 2014 10:22:58 GMT: DEBUG: SC.Module: Module 'cloudos_foundation/springboard' has completed loading, invoking callbacks.
Fri, 02 May 2014 10:22:58 GMT: DEBUG: <-- Response 1: 200 (417ms), headers: Accept-Ranges=bytes, Cache-Control=no-cache, no-store, private, Connection=keep-alive, Content-Encoding=gzip, Content-Language=en-us, Content-Length=162, Content-Type=application/json, Date=Fri, 02 May 2014 10:22:58 GMT, Etag="b8-4f7da4953c300", Expires=Sat, 02 May 2015 10:22:58 GMT, Last-Modified=Fri, 25 Apr 2014 09:06:52 GMT, Server=Apache, Strict-Transport-Security=max-age=31536000; includeSubDomains, Vary=Accept-Encoding body: (omitted)
Fri, 02 May 2014 10:22:58 GMT: DEBUG: Setting up appInfo for pages
Fri, 02 May 2014 10:22:58 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 1 conditions. Requirement was: dynamic app pages
Fri, 02 May 2014 10:22:58 GMT: DEBUG: <-- Response 2: 200 (432ms), headers: Accept-Ranges=bytes, Cache-Control=no-cache, no-store, private, Connection=keep-alive, Content-Encoding=gzip, Content-Language=en-us, Content-Length=164, Content-Type=application/json, Date=Fri, 02 May 2014 10:22:58 GMT, Etag="bc-4f7da4953c300", Expires=Sat, 02 May 2015 10:22:58 GMT, Last-Modified=Fri, 25 Apr 2014 09:06:52 GMT, Server=Apache, Strict-Transport-Security=max-age=31536000; includeSubDomains, Vary=Accept-Encoding body: (omitted)
Fri, 02 May 2014 10:22:58 GMT: DEBUG: Setting up appInfo for numbers
Fri, 02 May 2014 10:22:58 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 1 conditions. Requirement was: dynamic app numbers
Fri, 02 May 2014 10:22:58 GMT: DEBUG: <-- Response 3: 200 (451ms), headers: Accept-Ranges=bytes, Cache-Control=no-cache, no-store, private, Connection=keep-alive, Content-Encoding=gzip, Content-Language=en-us, Content-Length=165, Content-Type=application/json, Date=Fri, 02 May 2014 10:22:58 GMT, Etag="bc-4f7da4953c300", Expires=Sat, 02 May 2015 10:22:58 GMT, Last-Modified=Fri, 25 Apr 2014 09:06:52 GMT, Server=Apache, Strict-Transport-Security=max-age=31536000; includeSubDomains, Vary=Accept-Encoding body: (omitted)
Fri, 02 May 2014 10:22:58 GMT: DEBUG: Setting up appInfo for keynote
Fri, 02 May 2014 10:22:58 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 1 conditions. Requirement was: dynamic app keynote
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Prefetching module 'cloudkit/error_catcher'.
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Loading CSS file in 'cloudkit/error_catcher' -> '/system/cloudos/14C.131409/cloudkit/error_catcher/14C.131409/en-us/stylesheet. css'
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Loading JavaScript file in 'cloudkit/error_catcher' -> '/system/cloudos/14C.131409/cloudkit/error_catcher/14C.131409/en-us/javascript- strings.js'
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Prefetching module 'cloudos_foundation/language'.
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Loading JavaScript file in 'cloudos_foundation/language' -> '/system/cloudos/14C.131409/cloudos_foundation/language/14C.131409/en-us/javasc ript-strings.js'
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Prefetching module 'coreweb/date_formatter'.
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Loading JavaScript file in 'coreweb/date_formatter' -> '/system/cloudos/14C.131409/coreweb/date_formatter/14C.131409/en-us/javascript- strings.js'
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Prefetching module 'cloudos_foundation/alarms'.
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Loading CSS file in 'cloudos_foundation/alarms' -> '/system/cloudos/14C.131409/cloudos_foundation/alarms/14C.131409/en-us/styleshe et.css'
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Loading JavaScript file in 'cloudos_foundation/alarms' -> '/system/cloudos/14C.131409/cloudos_foundation/alarms/14C.131409/en-us/javascri pt-strings.js'
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Module 'cloudkit/error_catcher' finished loading.
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Module 'cloudkit/error_catcher' was prefetched, not evaluating until needed.
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Module 'cloudos_foundation/language' finished loading.
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Module 'cloudos_foundation/language' was prefetched, not evaluating until needed.
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Module 'coreweb/date_formatter' finished loading.
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Module 'coreweb/date_formatter' was prefetched, not evaluating until needed.
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Module 'cloudos_foundation/alarms' finished loading.
Fri, 02 May 2014 10:22:59 GMT: DEBUG: SC.Module: Module 'cloudos_foundation/alarms' was prefetched, not evaluating until needed.
Fri, 02 May 2014 10:23:28 GMT: DEBUG: <-- Response 4: 0 (timed out), headers:   body: (empty)
Fri, 02 May 2014 10:23:28 GMT: DEBUG: COS: invoking validateDidFail
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: BEGIN sendEvent: 'authDidNotConnect'
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: validatingAuth.gettingReply: will handle event 'authDidNotConnect'
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: BEGIN gotoState: active.authUI
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: starting from current state: validatingAuth.gettingReply
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states before: validatingAuth.gettingReply
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: pivot state = __ROOT_STATE__
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: <-- exiting state: validatingAuth.gettingReply
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: <-- exiting state: validatingAuth
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: --> entering state: active
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: --> entering state: active.authUI
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: --> entering state: active.authUI.downloadingAuthModule
Fri, 02 May 2014 10:23:28 GMT: DEBUG: SC.Module: Attempting to load 'cloudkit/auth_ui'
Fri, 02 May 2014 10:23:28 GMT: DEBUG: SC.Module: Module 'cloudkit/auth_ui' is not loaded, loading now.
Fri, 02 May 2014 10:23:28 GMT: DEBUG: SC.Module: 'cloudkit/auth_ui' depends on 'cloudkit/photo', loading dependency…
Fri, 02 May 2014 10:23:28 GMT: DEBUG: SC.Module: Attempting to load 'cloudkit/photo'
Fri, 02 May 2014 10:23:28 GMT: DEBUG: SC.Module: Module 'cloudkit/photo' is not loaded, loading now.
Fri, 02 May 2014 10:23:28 GMT: DEBUG: SC.Module: Loading JavaScript file in 'cloudkit/photo' -> '/system/cloudos/14C.131409/cloudkit/photo/14C.131409/en-us/javascript.js'
Fri, 02 May 2014 10:23:28 GMT: DEBUG: SC.Module: Loading CSS file in 'cloudkit/auth_ui' -> '/system/cloudos/14C.131409/cloudkit/auth_ui/14C.131409/en-us/[email protected] '
Fri, 02 May 2014 10:23:28 GMT: DEBUG: SC.Module: Loading JavaScript file in 'cloudkit/auth_ui' -> '/system/cloudos/14C.131409/cloudkit/auth_ui/14C.131409/en-us/javascript-string s.js'
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states after: active.authUI.downloadingAuthModule
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: END gotoState: active.authUI
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: END sendEvent: 'authDidNotConnect'
Fri, 02 May 2014 10:23:28 GMT: DEBUG: SC.Module: Module 'cloudkit/photo' finished loading.
Fri, 02 May 2014 10:23:28 GMT: DEBUG: SC.Module: Evaluating and invoking callbacks for 'cloudkit/photo'.
Fri, 02 May 2014 10:23:28 GMT: DEBUG: SC.Module: Module 'cloudkit/photo' has completed loading, invoking callbacks.
Fri, 02 May 2014 10:23:28 GMT: DEBUG: SC.Module: Module 'cloudkit/auth_ui' finished loading.
Fri, 02 May 2014 10:23:28 GMT: DEBUG: SC.Module: Evaluating and invoking callbacks for 'cloudkit/auth_ui'.
Fri, 02 May 2014 10:23:28 GMT: DEBUG: SC.Module: Module 'cloudkit/auth_ui' has completed loading, invoking callbacks.
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: BEGIN gotoState: active.authUI.fieldsEditable
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: starting from current state: active.authUI.downloadingAuthModule
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states before: active.authUI.downloadingAuthModule
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: pivot state = active.authUI
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: <-- exiting state: active.authUI.downloadingAuthModule
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: --> entering state: active.authUI.fieldsEditable
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states after: active.authUI.fieldsEditable
Fri, 02 May 2014 10:23:28 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: END gotoState: active.authUI.fieldsEditable
Fri, 02 May 2014 10:23:28 GMT: DEBUG: Preloading background images, but every image was already loaded. Running callback immediately.
Fri, 02 May 2014 10:23:28 GMT: DEBUG: At long last, SpringboardView is now allowed to generate button instances!
Fri, 02 May 2014 10:23:28 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 9 conditions. Requirement was: initial set of buttons
Fri, 02 May 2014 10:23:28 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 8 conditions. Requirement was: Button for mail
Fri, 02 May 2014 10:23:28 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 7 conditions. Requirement was: Button for contacts
Fri, 02 May 2014 10:23:28 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 6 conditions. Requirement was: Button for notes
Fri, 02 May 2014 10:23:28 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 5 conditions. Requirement was: Button for reminders
Fri, 02 May 2014 10:23:28 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 4 conditions. Requirement was: Button for find
Fri, 02 May 2014 10:23:28 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 3 conditions. Requirement was: Button for pages
Fri, 02 May 2014 10:23:28 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 2 conditions. Requirement was: Button for numbers
Fri, 02 May 2014 10:23:28 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 1 conditions. Requirement was: Button for keynote
Fri, 02 May 2014 10:23:28 GMT: DEBUG: Springboard: Springboard View has become ready to show! All of its wait conditions have been satisfied.
Fri, 02 May 2014 10:23:36 GMT: DEBUG: Sending stats to feedbackws
Fri, 02 May 2014 10:23:36 GMT: DEBUG: --> Request 5:   POST to https://feedbackws.icloud.com/reportStats, headers: Content-Type=text/plain, body: (omitted)
Fri, 02 May 2014 10:23:51 GMT: DEBUG: Sending stats to feedbackws
Fri, 02 May 2014 10:23:51 GMT: DEBUG: --> Request 6:   POST to https://feedbackws.icloud.com/reportStats, headers: Content-Type=text/plain, body: (omitted)
Fri, 02 May 2014 10:24:54 GMT: DEBUG: <-- Response 5: 200 (78147ms), headers: Cache-Control=no-cache, no-store, private, Content-Type=application/json; charset=UTF-8 body: (omitted)
Fri, 02 May 2014 10:24:54 GMT: INFO: Successfully sent stats to feedbackws
Fri, 02 May 2014 10:24:58 GMT: DEBUG: <-- Response 6: 200 (66699ms), headers: Cache-Control=no-cache, no-store, private, Content-Type=application/json; charset=UTF-8 body: (omitted)
Fri, 02 May 2014 10:24:58 GMT: INFO: Successfully sent stats to feedbackws
Fri, 02 May 2014 10:29:18 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 10:29:40 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 10:30:34 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 10:30:41 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: BEGIN sendEvent: 'userDidSubmit'
Fri, 02 May 2014 10:30:41 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: active.authUI.fieldsEditable: will handle event 'userDidSubmit'
Fri, 02 May 2014 10:30:41 GMT: DEBUG: CloudKit: Sending login POST request to https://setup.icloud.com/setup/ws/1/login
Fri, 02 May 2014 10:30:41 GMT: DEBUG: --> Request 7:   POST to https://setup.icloud.com/setup/ws/1/login?clientBuildNumber=14C.131409&clientId= CA53A6CC-FA79-4150-AF39-248318487608, headers: Content-Type=text/plain, body: (omitted)
Fri, 02 May 2014 10:30:41 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: BEGIN gotoState: active.authUI.attemptIsSubmitted
Fri, 02 May 2014 10:30:41 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: starting from current state: active.authUI.fieldsEditable
Fri, 02 May 2014 10:30:41 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states before: active.authUI.fieldsEditable
Fri, 02 May 2014 10:30:41 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: pivot state = active.authUI
Fri, 02 May 2014 10:30:41 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: <-- exiting state: active.authUI.fieldsEditable
Fri, 02 May 2014 10:30:41 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: --> entering state: active.authUI.attemptIsSubmitted
Fri, 02 May 2014 10:30:41 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states after: active.authUI.attemptIsSubmitted
Fri, 02 May 2014 10:30:41 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: END gotoState: active.authUI.attemptIsSubmitted
Fri, 02 May 2014 10:30:41 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: END sendEvent: 'userDidSubmit'
Fri, 02 May 2014 10:31:00 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 10:31:11 GMT: DEBUG: <-- Response 7: 0 (timed out), headers:   body: (empty)
Fri, 02 May 2014 10:31:11 GMT: DEBUG: COS: invoking loginDidFail
Fri, 02 May 2014 10:31:11 GMT: WARN: Auth: No auth bag or recognized status code
Fri, 02 May 2014 10:31:11 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: BEGIN sendEvent: 'authDidNotConnect'
Fri, 02 May 2014 10:31:11 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: active.authUI.attemptIsSubmitted: will handle event 'authDidNotConnect'
Fri, 02 May 2014 10:31:11 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: END sendEvent: 'authDidNotConnect'
Fri, 02 May 2014 10:31:19 GMT: DEBUG: Sending stats to feedbackws
Fri, 02 May 2014 10:31:19 GMT: DEBUG: --> Request 8:   POST to https://feedbackws.icloud.com/reportStats, headers: Content-Type=text/plain, body: (omitted)
Fri, 02 May 2014 10:31:24 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 10:32:05 GMT: DEBUG: <-- Response 8: 200 (46127ms), headers: Cache-Control=no-cache, no-store, private, Content-Type=application/json; charset=UTF-8 body: (omitted)
Fri, 02 May 2014 10:32:05 GMT: INFO: Successfully sent stats to feedbackws
Fri, 02 May 2014 10:34:54 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 10:37:33 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 10:37:35 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: BEGIN gotoState: active.authUI.fieldsEditable
Fri, 02 May 2014 10:37:35 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: starting from current state: active.authUI.attemptIsSubmitted
Fri, 02 May 2014 10:37:35 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states before: active.authUI.attemptIsSubmitted
Fri, 02 May 2014 10:37:35 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: pivot state = active.authUI
Fri, 02 May 2014 10:37:35 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: <-- exiting state: active.authUI.attemptIsSubmitted
Fri, 02 May 2014 10:37:35 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: --> entering state: active.authUI.fieldsEditable
Fri, 02 May 2014 10:37:35 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states after: active.authUI.fieldsEditable
Fri, 02 May 2014 10:37:35 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: END gotoState: active.authUI.fieldsEditable
Fri, 02 May 2014 10:37:35 GMT: DEBUG: CloudKit: ErrorCatcher dialog invoked.
Fri, 02 May 2014 10:37:36 GMT: DEBUG: SC.Module: Attempting to load 'cloudkit/error_catcher'
Fri, 02 May 2014 10:37:36 GMT: DEBUG: SC.Module: Module 'cloudkit/error_catcher' already loaded.
Fri, 02 May 2014 10:37:36 GMT: DEBUG: SC.Module: Evaluating JavaScript for module 'cloudkit/error_catcher'.
Fri, 02 May 2014 10:37:36 GMT: DEBUG: SC.Module: Module 'cloudkit/error_catcher' has completed loading, invoking callbacks.
Fri, 02 May 2014 10:37:43 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: BEGIN sendEvent: 'userDidSubmit'
Fri, 02 May 2014 10:37:43 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: active.authUI.fieldsEditable: will handle event 'userDidSubmit'
Fri, 02 May 2014 10:37:43 GMT: DEBUG: CloudKit: Sending login POST request to https://setup.icloud.com/setup/ws/1/login
Fri, 02 May 2014 10:37:43 GMT: DEBUG: --> Request 9:   POST to https://setup.icloud.com/setup/ws/1/login?clientBuildNumber=14C.131409&clientId= CA53A6CC-FA79-4150-AF39-248318487608, headers: Content-Type=text/plain, body: (omitted)
Fri, 02 May 2014 10:37:43 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: BEGIN gotoState: active.authUI.attemptIsSubmitted
Fri, 02 May 2014 10:37:43 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: starting from current state: active.authUI.fieldsEditable
Fri, 02 May 2014 10:37:43 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states before: active.authUI.fieldsEditable
Fri, 02 May 2014 10:37:43 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: pivot state = active.authUI
Fri, 02 May 2014 10:37:43 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: <-- exiting state: active.authUI.fieldsEditable
Fri, 02 May 2014 10:37:43 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: --> entering state: active.authUI.attemptIsSubmitted
Fri, 02 May 2014 10:37:43 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states after: active.authUI.attemptIsSubmitted
Fri, 02 May 2014 10:37:43 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: END gotoState: active.authUI.attemptIsSubmitted
Fri, 02 May 2014 10:37:43 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: END sendEvent: 'userDidSubmit'
Fri, 02 May 2014 10:37:43 GMT: DEBUG: Sending stats to feedbackws
Fri, 02 May 2014 10:37:43 GMT: DEBUG: --> Request 10:   POST to https://feedbackws.icloud.com/reportStats, headers: Content-Type=text/plain, body: (omitted)
Fri, 02 May 2014 10:37:55 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 10:37:59 GMT: DEBUG: autoUpdate: Running latest build, 14C.131409
Fri, 02 May 2014 10:38:03 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 10:38:14 GMT: DEBUG: <-- Response 9: 0 (timed out), headers:   body: (empty)
Fri, 02 May 2014 10:38:14 GMT: DEBUG: COS: invoking loginDidFail
Fri, 02 May 2014 10:38:14 GMT: WARN: Auth: No auth bag or recognized status code
Fri, 02 May 2014 10:38:14 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: BEGIN sendEvent: 'authDidNotConnect'
Fri, 02 May 2014 10:38:14 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: active.authUI.attemptIsSubmitted: will handle event 'authDidNotConnect'
Fri, 02 May 2014 10:38:14 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: END sendEvent: 'authDidNotConnect'
Fri, 02 May 2014 10:38:18 GMT: DEBUG: <-- Response 10: 200 (34469ms), headers: Cache-Control=no-cache, no-store, private, Content-Type=application/json; charset=UTF-8 body: (omitted)
Fri, 02 May 2014 10:38:18 GMT: INFO: Successfully sent stats to feedbackws
Fri, 02 May 2014 10:38:22 GMT: DEBUG: Sending stats to feedbackws
Fri, 02 May 2014 10:38:22 GMT: DEBUG: --> Request 11:   POST to https://feedbackws.icloud.com/reportStats, headers: Content-Type=text/plain, body: (omitted)
Fri, 02 May 2014 10:38:25 GMT: DEBUG: <-- Response 11: 200 (3398ms), headers: Cache-Control=no-cache, no-store, private, Content-Type=application/json; charset=UTF-8 body: (omitted)
Fri, 02 May 2014 10:38:25 GMT: INFO: Successfully sent stats to feedbackws
Fri, 02 May 2014 10:38:37 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 10:39:47 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 10:42:58 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 10:43:45 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 10:44:12 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 10:52:58 GMT: DEBUG: autoUpdate: Running latest build, 14C.131409
Fri, 02 May 2014 10:59:09 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 11:03:38 GMT: DEBUG: CloudOS window received focus event
Fri, 02 May 2014 11:03:39 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: BEGIN gotoState: active.authUI.fieldsEditable
Fri, 02 May 2014 11:03:39 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: starting from current state: active.authUI.attemptIsSubmitted
Fri, 02 May 2014 11:03:39 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states before: active.authUI.attemptIsSubmitted
Fri, 02 May 2014 11:03:39 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: pivot state = active.authUI
Fri, 02 May 2014 11:03:39 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: <-- exiting state: active.authUI.attemptIsSubmitted
Fri, 02 May 2014 11:03:39 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: --> entering state: active.authUI.fieldsEditable
Fri, 02 May 2014 11:03:39 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: current states after: active.authUI.fieldsEditable
Fri, 02 May 2014 11:03:39 GMT: INFO: SC.Statechart<cloudos-statechart, sc915>: END gotoState: active.authUI.fieldsEditable
Fri, 02 May 2014 11:03:39 GMT: DEBUG: CloudKit: ErrorCatcher dialog invoked.
Fri, 02 May 2014 11:03:39 GMT: DEBUG: SC.Module: Attempting to load 'cloudkit/error_catcher'
Fri, 02 May 2014 11:03:39 GMT: DEBUG: SC.Module: Module 'cloudkit/error_catcher' already loaded.

I click on the iTunes store button and it comes up with the loading bar at the top of the screen where the song time marker would be, but nothing ever happens. It just loads and loads and loads, I don't even get an error message...
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

5 days old iPhone 5 iOS 6.1.4 battery life please help

My phone is 5 days old and i am so fed up with battery life. I disabled all data settings and location services and i have nothing in notification center for any push notification. But still i lost 40% of the battery in half a day with just 5 mins of voice call and 15 mins of texting. Phone was idle the rest of the time and when i used i had brightness at around just 10-15% this is my first iPhone and totally disappointed as i saw battery to last a full day of normal usage in the internet. I am totally fed up with apple. What should i do now ? I am a student and invested an year's savings of mine to get this phone. I am totally fed up. Someone please help me.

You have to tell us what your usage pattern is like, what your reception/signal strength is, and what network type you are using (E/3G/4G/LTE)
To note, the more the screen is on (in long intervals 2+ minutes) the shorter the battery life is.
Streaming music over 3G will last 6 hours if the screen stays off for most of that time.
Email, messages, web browsing will last most of the day.
Since you have GSM, your phone should last 10 hours with light usage.

Help! bootcamped window pro 7 ok BUT driver / setup flash drive seemed to correctly install drivers, nvidia etc etc BUT on windows login screen i have no mouse or keyboard , have plugged in logitech usb mouse and keyboard still no good please help

Please can somebody help me with this.
i cannot get any mouse or keyboard input on my login screen after bootcamping windows 7 pro.
i used a correctly formatted drive for the driver downloads, they seemed to install but now i have no input method to login to wondows7.
all is fine in osx apple wireless mouse keyboard magicpad ok
windows cant login due to no input devices.
have connected logitech mouse keyboard still nothing.
please help!
thanks in advance

1. I have tried copying the Keyboard/Trackpad/Mouse drivers to the $WinPEDriver$ directory with mixed success on a 2012 MBP.
2. My experience is based on a 2013 rMBP. You may be able to use an Apple USB Keypad/Mouse to better success.
3. See http://www.macworld.com/article/2460820/macbook-pro-mid-2014-review-minor-update -offers-slightly-better-cpu-performance.html for HW differences between the two machines.
4. If you have access to a 2013 rMBP, I can suggest trying to build the USB on that and working with the USB to see if you can make it install Windows. the rMBP 2014 and rMBP 2013 have the same HW, except some CPU changes. You can also try building the USB at the nearest Apple store, if possible.
5. There is a section in AutoUnattend.xml, which is supposed to install all drivers in $WinPEDriver$ (see this http://support.microsoft.com/kb/2686316 )
<component name="Microsoft-Windows-PnpCustomizationsWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DriverPaths>
                <PathAndCredentials wcm:keyValue="1" wcm:action="add">
                    <Path>$WinPEDriver$</Path>
                </PathAndCredentials>
            </DriverPaths>
        </component>

Jdev version problems .. please help!

Hi ,
I had devleoped a project using jdev 10g .. now need to open that project in Jdev 9i .. cant use jdev 10g anymore due to some issues..
But when i try to open the project in JDev 9i , it gives a warning .. that the projects will be migrated and cant be opened with a lower version of JDEV ..
Can anyone please help on this ! Its very urgent ..
Regards,
Preeti

Preeti,
As sumit suggested you try to fix the R12 error, else raise a SR with support and get fixed.
Btw, Re: Regd JDEV set up .. error running default toolbox.jsp page
is the thread you discussed about the R12 issue?
Check the following, it may add some value for fixing your issue.
1) Can you run the following URL in your R12 instance,
http://<hostname>:<port>/OA_HTML/jsp/fnd/aoljtest.jsp
and do the testings and see any error you are getting related to Guest user.
2) Check the password for the Guest user,
and use the same in the following query
select fnd_web_sec.validate_login('GUEST','<PASSWORD FROM DBC FILE>') from dual;
This should return "Y', If it returns "N', you need to change the password for GUESTin the database
(More details check the metalink note - 458064.1)
3) Are you able to login in your instance and access the pages without any error?
Thanks.
With Regards,
Kali.
OSSI.

Instance is IDLE , please help

Similar Messages

Maybe you are looking for