Instance is very slow

hii everybody,
i m a newbie,my instance is slow,how can i make it fast?my db is 10.2.0.3 on linux platform redhat 5.7 . how can i check sga,memory of cpu,.....your help is higly appreciated.
thanks and regards,
xyz.

At Linux level you can use top/vmstat to check CPU usage and vmstat/free to check RAM usage.
At database level:
If you have the right license for AWR and ADDM try to get a AWR report: http://docs.oracle.com/cd/E11882_01/server.112/e16638/autostat.htm#PFGRF94203 and an ADDM report:
http://www.oracle-base.com/articles/10g/automatic-database-diagnostic-monitor-10g.php. If you don't have the right license for AWR and ADDM try to install Statspack using <ORACLE_HOME>/rdbms/admin/spdoc.txt and run a Statspack report. In AWR or Statspack report look at the top SQL statements in the different "SQL ordered by ..." sections and try to analyze these SQL statements.
If you can identify slow database sessions, you can also try to enable SQL trace and to use TKPROF for this database session: http://www.oracle-base.com/articles/10g/sql-trace-10046-trcsess-and-tkprof-10g.php. TKPROF will give run time statistics for all traced SQL statements: SQL statements that take most time should be analyzed.
Edited by: P. Forstmann on 30 déc. 2012 09:24

Similar Messages

  • Arch instance living on USB mass storage device is very slow

    I installed an instance of Arch on a USB stick.  This is a full installation, not a ramdisk-based "installer" or anything.  However, this little guy is very, very slow.  Sometimes, I have to wait for almost a minute between writes while the UI locks up (XFCE4, in case you're curious).
    I think a lot of the problem comes from iowait load and pending write requests.  I've been considering experimenting with data=writeback, but I've never used this ext option before, and thought I'd ask you guys about it first.  I hear that sudden power failure can lead to pretty severe data loss with writeback enabled.  Anyone have any experience with this?  Are there any other tweaks I can apply to increase performance that would be appropriate for a USB mass storage device?  I have noatime enabled, but that only gives it an almost unnoticeable bump.

    @hifi25nl You can link a post directly, by copying the link that is behind the date, at least with my theme, on the same height as the post number.
    https://bbs.archlinux.org/viewtopic.php … 2#p1428782

  • IPAD2 very slow after IOS 8 upgrade

    After IOS 8 upgrade many aplications ( Safari, Facebook, etc) load  very, very slow (comparing with 7 version) , with a significant delay of more than 10 seconds...
    Who can I solve this problem? Any workaround?
    PD
    Apple should better test the software before delivering.
    Thanks.

    Here's the list of the most annoying issues that affect me since updating my iPad 2 64GB w/Cellular iPad to IOS 8:
    EXTREMELY SLOW - When opening apps, or switching between them - We are talking just the built-in apps. Mail, Safari, Settings....
    Extremely slow Wi-Fi AND broadband. The Wi-Fi is the worst though. Horrible. Page load times are 2 to 4x slower than my wife's iPad.
    Battery life reduced by at least 25%. Used to make it all day long, now I am having to plug it in.
    Heat - It is working so hard that the processor is heating up. That can't be healthy for it, and surely the majority of the power issues stem from this.
    Copy/Paste not functioning correctly between browser windows. Oh this is frustrating. I just want to paste the URL of one website I am on to Facebook, for instance. Even though I COPY, it's pasting in info I clipped a earlier in the day to one browser tab, but if I open another one, it will paste the correct information. You never know what you are going to get.
    Cannot post a photo to facebook by hitting the camera icon when leaving a reply or making a post (using web browser version)... It starts the upload, then just stops. I *CAN* go to photos, then SHARE it to facebook, but that doesn't allow me to post a photo along with a reply.
    Multiple app crashes per day. This I can deal with. It's nothing new, it's just more frequent. Safari and Mail seem to be the major culprits. It wouldn't be so bad except it takes 2-4 seconds to reopen the crashed app. Sometimes as much as 10 seconds.
    And that's just the annoying ones....

  • CQ5 server performance is very slow ?

    Hello,
    I deployed my project on publish server, but both the server responding very slow, Is it the CQ5 server the very slow?
    Please let me know how to make more faster performance of CQ5 server, please let me know is there any configration we have to do?
    For showing the page around it takes 10min, how to solve such issues.
    Please let me know any perfoamance tuning guide/tricks.
    Regards,
    Satish

    For starters answers to a few questions would help:
    1. What kind of hardware config is in place? (RAM, disk-space)
    2. Which OS are you running instances? Are both author and publish on same machine?
    3. Have you checked error logs?
    From the problem description you have provided 1st seems to be the main issue.
    - Ashish

  • Overall Performance is very slow

    Hi,
    I have 4GB in PI-DEV and 4GB in BI-DEV server, BI server is running very good and fast, but PI-DEV performace is very very slow even it take 5 munites to login myself...
    There is no user login in DEV server... NW 7.0 2004s, Windows 2003 OS, Patch level 16. oracle 10g
    Is anyone tell me step by step how do i check performacne issue... i read performance book but not that help
    Thanks in Advanced...

    Sorry for late Reply
    Basically I have PI-DEV and BI-DEV system and both system has only 4GB memory and same location same network, same patch level 16, same kernal level, under windows 2003 server, and Oracle DB, but different instance... some reason in PI-DEV performance is very slow only Integration Engine...
    when I go SXMB_MONI it take more then process 20 munites one transaction, as i maintion before
    I checked both memory paramaters are same like configTools
    I checked database table space
    I checked heap memory paramaters
    I deleted AFG_XI_MSG table entries no messages are hold
    sometihng really wrong in Integration Engine

  • Crystal Report 10.5 very slow (30 minutes) to display

    crystal report 10.5 in vs 2008 display at extremely very slow speed in development server and production server. i have loaded a dataset as the datasource for the report. i also checked the code in debugging mode to know where the delay is but found out it is not from the code as the code executes to the end in less than a minute but the browser keeps loading for several minute before display.
    please kindly help to resolve this issue.

    With CR 2008:
    For OLE DB then use:
    MS SQL 2005 - OLE DB Provider
    MS SQL 2008 - SQL Native 10
    For ODBC then use:
    MS SQL 2005 - SQL Native
    MS SQL 2008 - SQL Native 10
    Once you have a report created, you can use the following code at runtime:
    Public Sub New()
            'This call is required by the Windows Form Designer.
            InitializeComponent()
            'Add any initialization after the InitializeComponent() call
            'Create an instance of the strongly-typed report object
            crReportDocument = New CrystalReport1()
            'Setup the connection information structure to be used
            'to log onto the datasource for the report.
            crConnectionInfo = New ConnectionInfo()
            With crConnectionInfo
                .ServerName = "escalade"    'physical server name
                .DatabaseName = "Pubs"
                .UserID = "sa"
                .Password = "admin"
            End With
            'Get the table information from the report
            crDatabase = crReportDocument.Database
            crTables = crDatabase.Tables
            'Loop through all tables in the report and apply the connection
            'information for each table.
            For Each crTable In crTables
                crTableLogOnInfo = crTable.LogOnInfo
                crTableLogOnInfo.ConnectionInfo = crConnectionInfo
                crTable.ApplyLogOnInfo(crTableLogOnInfo)
            Next
            'Set the viewer to the report object to be previewed.
            CrystalReportViewer1.ReportSource = crReportDocument
    End Sub
    And be careful with subreports. If you use the same connection type as for the main report the subreport should piggy back on the main connection. If you use a different connection, you'll have to use code to connect the subreports:
    //loop through all the sections to find all the report objects
    foreach (CrystalDecisions.CrystalReports.Engine.Section crSection in crSections)
        crReportObjects = crSection.ReportObjects;
        //loop through all the report objects to find all the subreports
        foreach (CrystalDecisions.CrystalReports.Engine.ReportObject crReportObject in crReportObjects)
            if (crReportObject.Kind == ReportObjectKind.SubreportObject)
                //you will need to typecast the reportobject to a subreport
                //object once you find it
                crSubreportObject = (CrystalDecisions.CrystalReports.Engine.SubreportObject)crReportObject;
                string mysubname = crSubreportObject.SubreportName.ToString();
                //open the subreport object
                crSubreportDocument = crSubreportObject.OpenSubreport(crSubreportObject.SubreportName);
                //set the database and tables objects to work with the subreport
                crDatabase = crSubreportDocument.Database;
                crTables = crDatabase.Tables;
                tableIndex = 0;
                bool SecureDB;
                //loop through all the tables in the subreport and
                //set up the connection info and apply it to the tables
                foreach (CrystalDecisions.CrystalReports.Engine.Table crTable in crTables)
                {   // check if integrated security is enabled
                    SecureDB = crSubreportDocument.Database.Tables[tableIndex].LogOnInfo.ConnectionInfo.IntegratedSecurity;
                    string TableName = crTable.Name.ToString();
                    tableIndex++;
                    crConnectioninfo.ServerName = "VMW2K8CRSE2K8";
                    //if (!SecureDB)
                        crConnectioninfo.UserID = "sa";
                        crConnectioninfo.Password = "PW";
                        crConnectioninfo.DatabaseName = "QTYLTD";
                        crTableLogOnInfo = crTable.LogOnInfo;
                        crTableLogOnInfo.ConnectionInfo = crConnectioninfo;
                        crTable.ApplyLogOnInfo(crTableLogOnInfo);
    rpt.VerifyDatabase();
    For more info:
    SAP Crystal Reports .NET SDK Developer Guide
    SAP Crystal Reports .NET API Guide
    http://scn.sap.com/docs/DOC-21967
    http://scn.sap.com/docs/DOC-21953
    (Not sure if I gave you the last two links already.
    - Ludek

  • My mac mini is running very slow all of a sudden, how can i restore it's speed?

    my mac mini is running very slow all of a sudden, how can i restore it's speed?

    This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
    If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
    Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking  anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='User %s%%\t\tSystem %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */   /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; grep -q 'No th' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=`ls /L*/L*/Dia*/*.panic | wc -l`; Ps "Panics"; o=`ls /L*/L*/Dia*/*.c* | tail`; Pm "System crash logs"; o=`ls L*/L*/Dia* | tail`; Pm "User crash logs"; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; [[ o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 90 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Pm "Total CPU usage" && s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process $s of user ${s[1]}"; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process $s of user ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=`ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'`; Pm "$d"; done; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep :`; Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(egrep -v '(local|broadcast)host' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in {0..1}; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
    If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
    The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window. If you don't see that line within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
    When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • My iMac is running very slow

    My iMac is now running very slow.  Every process/application lags, safari, iPhoto, pages, iTunes, etc.  Beach ball just spins and spins.....
    I have an early 2008 iMac with 2.66 GHz Intel Core 2 Duo processor, 2 GB 800 MHz DDR2 SDRAM memory, 320 GB SATA Disk storage with 30GB free.  I just upgraded to OS X Yosemite 10.10.1 hoping it would help solve the problem but no luck.
    I ran "syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef" in the terminal window and received the following in the text window....
    Jan 14 00:18:17 X-imac-2 kernel[0] <Notice>: Process systemmigrationd [146] disabling system-wide I/O Throttling
    --- last message repeated 5 times ---
    Any help is greatly appreciated. Thanks

    Thanks Linc for your help!  Here is the logs from Console:
    1/17/15 10:02:48.283 AM com.apple.xpc.launchd[1]: (com.apple.PhotoApps.AVCHDConverter) Unknown key for dictionary: EnvironmentVarialbles
    1/17/15 10:02:48.283 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 10:03:08.258 AM WindowServer[119]: disable_update_timeout: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
    1/17/15 10:03:14.986 AM WindowServer[119]: common_reenable_update: UI updates were finally reenabled by application "iPhoto" after 7.73 seconds (server forcibly re-enabled them after 1.00 seconds)
    1/17/15 10:03:21.834 AM WindowServer[119]: disable_update_timeout: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
    1/17/15 10:03:35.834 AM WindowServer[119]: disable_update_likely_unbalanced: UI updates still disabled by application "iPhoto" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
    1/17/15 10:03:36.125 AM WindowServer[119]: common_reenable_update: UI updates were finally reenabled by application "iPhoto" after 15.29 seconds (server forcibly re-enabled them after 1.00 seconds)
    1/17/15 10:03:37.950 AM iPhoto[733]: void CGSUpdateManager::log() const: conn 0xe2ab: spurious update.
    1/17/15 10:03:38.799 AM com.apple.SecurityServer[54]: Session 100029 created
    1/17/15 10:03:39.179 AM com.apple.SecurityServer[54]: Killing auth hosts
    1/17/15 10:03:39.179 AM com.apple.SecurityServer[54]: Session 100028 destroyed
    1/17/15 10:03:46.317 AM iPhoto[733]: The function ‘CGContextClear’ is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance.
    1/17/15 10:04:42.124 AM sandboxd[606]: ([626]) com.apple.metada(626) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    1/17/15 10:04:51.507 AM sandboxd[606]: ([626]) com.apple.metada(626) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    1/17/15 10:04:54.150 AM sandboxd[606]: ([626]) com.apple.metada(626) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    1/17/15 10:04:56.942 AM com.apple.xpc.launchd[1]: (com.apple.quicklook[746]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
    1/17/15 10:05:10.094 AM Console[749]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
    1/17/15 10:05:19.067 AM WindowServer[119]: disable_update_timeout: UI updates were forcibly disabled by application "Console" for over 1.00 seconds. Server has re-enabled them.
    Here are a few other lines from earlier that my also be helpful.  Most of these are repeated over and over.
    1/16/15 4:43:20.000 PM kernel[0]: BUG in process suhelperd[452]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
    1/16/15 5:31:07.775 PM Safari[6461]: Communications error: <OS_xpc_error: <error: 0x7fff745dab60> { count = 1, contents =
      "XPCErrorDescription" => <string: 0x7fff745dafa8> { length = 22, contents = "Connection interrupted" }
    }>
    1/16/15 5:57:11.000 PM kernel[0]: memorystatus_thread: idle exiting pid 5527 [CoreServicesUIAg]
    1/16/15 6:11:37.704 PM nsurlstoraged[6907]: ERROR: shrinkDB - unable to start a DB transaction.  Error-code=5
    1/16/15 6:13:49.644 PM com.apple.xpc.launchd[1]: (com.apple.auditd[6976]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.auditd
    1/16/15 6:13:50.077 PM kellerct[6980]: audit warning: soft /var/audit
    1/16/15 6:13:50.077 PM kellerct[6979]: audit warning: allsoft
    1/16/15 6:13:50.587 PM kellerct[6982]: audit warning: closefile /var/audit/20150117001305.20150117001349
    1/16/15 6:16:26.093 PM nsurlstoraged[6907]: Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
    1/17/15 7:18:17.197 AM BezelServices 245.23[67]: ASSERTION FAILED: dvcAddrRef != ((void *)0) -[DriverServices getDeviceAddress:] line: 2602
    This is from this morning when it took almost 15 mins to fully wake up:
    1/17/15 7:53:08.866 AM WindowServer[119]: CGXDisplayDidWakeNotification [30972791675783]: posting kCGSDisplayDidWake
    1/17/15 7:53:08.866 AM WindowServer[119]: handle_will_sleep_auth_and_shield_windows: Deferring.
    1/17/15 7:54:42.460 AM com.apple.backupd[223]: Copied 51.64 GB of 118.69 GB, 161123 of 201178 items
    1/17/15 7:55:57.306 AM SecurityAgent[174]: User info context values set for kellerct
    1/17/15 7:55:58.186 AM com.apple.xpc.launchd[1]: (com.apple.auditd[354]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.auditd
    1/17/15 7:55:59.176 AM kellerct[359]: audit warning: soft /var/audit
    1/17/15 7:55:59.176 AM kellerct[360]: audit warning: closefile /var/audit/20150117051759.20150117135558
    1/17/15 7:55:59.178 AM kellerct[358]: audit warning: allsoft
    1/17/15 7:55:59.852 AM com.apple.xpc.launchd[1]: (com.apple.FileSyncAgent.PHD.isRunning) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:00.003 AM com.apple.xpc.launchd[1]: (com.apple.mbloginhelper.user) This key does not do anything: OnDemand
    1/17/15 7:56:00.003 AM com.apple.xpc.launchd[1]: (com.apple.mbpluginhost.user) This key does not do anything: OnDemand
    1/17/15 7:56:00.196 AM com.apple.xpc.launchd[1]: (com.apple.secd) This key does not do anything: OnDemand
    1/17/15 7:56:00.196 AM com.apple.xpc.launchd[1]: (com.apple.secd) The ServiceIPC key is no longer respected. Please remove it.
    1/17/15 7:56:00.289 AM com.apple.xpc.launchd[1]: (com.apple.speech.speechsynthesisd) This key does not do anything: OnDemand
    1/17/15 7:56:00.314 AM com.apple.xpc.launchd[1]: (com.apple.TrustEvaluationAgent) This key does not do anything: OnDemand
    1/17/15 7:56:03.337 AM SecurityAgent[174]: Login Window login proceeding
    1/17/15 7:56:04.965 AM loginwindow[67]: Login Window - Returned from Security Agent
    1/17/15 7:56:05.200 AM loginwindow[67]: USER_PROCESS: 67 console
    1/17/15 7:56:06.000 AM kernel[0]: AppleKeyStore:Sending lock change 0 for handle -501
    1/17/15 7:56:06.381 AM com.apple.xpc.launchd[1]: (com.apple.AssistiveControl.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.381 AM com.apple.xpc.launchd[1]: (com.apple.btsa) This key does not do anything: OnDemand
    1/17/15 7:56:06.382 AM com.apple.xpc.launchd[1]: (com.apple.coreservices.lsactivity) Unknown key for Boolean: DrainMessagesAfterFailedInit
    1/17/15 7:56:06.383 AM com.apple.xpc.launchd[1]: (com.apple.coreservices.uiagent) This key does not do anything: OnDemand
    1/17/15 7:56:06.383 AM com.apple.xpc.launchd[1]: (com.apple.diagnostics_agent) This service is defined to be constantly running and is inherently inefficient.
    1/17/15 7:56:06.384 AM com.apple.xpc.launchd[1]: (com.apple.dock.fullscreen) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.384 AM com.apple.xpc.launchd[1]: (com.apple.dock.server) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.384 AM com.apple.xpc.launchd[1]: (com.apple.dock.notificationcenter) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.384 AM com.apple.xpc.launchd[1]: (com.apple.dock.appstore) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.384 AM com.apple.xpc.launchd[1]: (com.apple.dock.remotedesktoppicture) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.384 AM com.apple.xpc.launchd[1]: (com.apple.dock.launchpad) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.384 AM com.apple.xpc.launchd[1]: (com.apple.dock.downloads) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.384 AM com.apple.xpc.launchd[1]: (com.apple.EscrowSecurityAlert) Unknown key for string: seatbelt-profiles
    1/17/15 7:56:06.384 AM com.apple.xpc.launchd[1]: (com.apple.Finder) ThrottleInterval set to zero. You're not that important. Ignoring.
    1/17/15 7:56:06.385 AM com.apple.xpc.launchd[1]: (com.apple.FontRegistryUIAgent) This key does not do anything: OnDemand
    1/17/15 7:56:06.385 AM com.apple.xpc.launchd[1]: (com.apple.ATS.FontValidator) This key does not do anything: OnDemand
    1/17/15 7:56:06.385 AM com.apple.xpc.launchd[1]: (com.apple.ATS.FontValidatorConduit) This key does not do anything: OnDemand
    1/17/15 7:56:06.385 AM com.apple.xpc.launchd[1]: (com.apple.gamed) The JetsamProperties key is not available on this platform.
    1/17/15 7:56:06.385 AM com.apple.xpc.launchd[1]: (com.apple.gamed) This key does not do anything: OnDemand
    1/17/15 7:56:06.385 AM com.apple.xpc.launchd[1]: (com.apple.gamed) The ServiceIPC key is no longer respected. Please remove it.
    1/17/15 7:56:06.385 AM com.apple.xpc.launchd[1]: (com.apple.helpd) This key does not do anything: OnDemand
    1/17/15 7:56:06.386 AM com.apple.xpc.launchd[1]: (com.apple.installd.user) This key does not do anything: OnDemand
    1/17/15 7:56:06.387 AM com.apple.xpc.launchd[1]: (com.apple.Maps.mapspushd) Unknown key for double: StartInterval
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.user.501.100006.Aqua) Caller tried to hijack service: path = /System/Library/LaunchAgents/com.apple.mbpluginhost.user.plist, caller = loginwindow.67
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.midiserver.io) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.noticeboard.agent) This key does not do anything: OnDemand
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.notificationcenterui.alerts) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.notificationcenterui.tcc) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.notificationcenterui.agent) This service is defined to be constantly running and is inherently inefficient.
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.user.501.100006.Aqua) Caller tried to hijack service: path = /System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, caller = loginwindow.67
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.PubSub.Agent) The ServiceIPC key is no longer respected. Please remove it.
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.quicklook.ui.helper.active) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.ReportCrash) The DrainMessagesOnCrash key is not yet implemented. If you rely on this key, please file a bug.
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.ReportCrash.Self) The DrainMessagesOnCrash key is not yet implemented. If you rely on this key, please file a bug.
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.rtcreportingd) The UserName key is not supported for non-System services.
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.sharingd) This service is defined to be constantly running and is inherently inefficient.
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.soagent) Invalid type for event (event/type): events/array
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.soagent) Invalid type for event (event/type): bundleid/string
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.speech.speechdatainstallerd) This key does not do anything: OnDemand
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.ssinvitationagent) This key does not do anything: OnDemand
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.systemuiserver.ServiceProvider) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.395 AM com.apple.xpc.launchd[1]: (com.apple.dockextra.server) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.396 AM com.apple.xpc.launchd[1]: (com.apple.SUISMessaging) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.396 AM com.apple.xpc.launchd[1]: (com.apple.ipodserver) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.396 AM com.apple.xpc.launchd[1]: (com.apple.systemuiserver.screencapture) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.396 AM com.apple.xpc.launchd[1]: (com.apple.tsm.uiserver) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.396 AM com.apple.xpc.launchd[1]: (com.apple.dockling.server) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.396 AM com.apple.xpc.launchd[1]: (com.apple.window_proxies.startup) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.396 AM com.apple.xpc.launchd[1]: (com.apple.window_proxies) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.396 AM com.apple.xpc.launchd[1]: (com.apple.inputswitcher.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.396 AM com.apple.xpc.launchd[1]: (com.apple.universalaccesscontrol.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.396 AM com.apple.xpc.launchd[1]: (com.apple.universalaccessd.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.396 AM com.apple.xpc.launchd[1]: (com.apple.UserEventAgent-Aqua) This service is defined to be constantly running and is inherently inefficient.
    1/17/15 7:56:06.487 AM com.apple.xpc.launchd[1]: (com.apple.usernoted) This service is defined to be constantly running and is inherently inefficient.
    1/17/15 7:56:06.487 AM com.apple.xpc.launchd[1]: (com.apple.VoiceOver.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.488 AM com.apple.xpc.launchd[1]: (com.apple.ZoomWindow.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:56:06.488 AM com.apple.xpc.launchd[1]: (org.openbsd.ssh-agent) The ServiceIPC key is no longer respected. Please remove it.
    1/17/15 7:56:06.488 AM com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.user.501.100006.Aqua) Failed to bootstrap path: path = /System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, error = 17: File exists
    1/17/15 7:56:06.488 AM com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.user.501.100006.Aqua) Failed to bootstrap path: path = /System/Library/LaunchAgents/com.apple.mbpluginhost.user.plist, error = 17: File exists
    1/17/15 7:56:09.953 AM lsregister[369]: LaunchServices: Begin database seeding
    1/17/15 7:56:09.954 AM lsregister[369]: LaunchServices: Completed database seeding
    1/17/15 7:56:11.822 AM UserEventAgent[366]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    1/17/15 7:56:12.064 AM com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.user.501.100006.Aqua) Could not import service from caller: caller = otherbsd.367, service = com.apple.photostream-agent, error = 119: Service is disabled
    1/17/15 7:56:12.064 AM otherbsd[367]: Could not submit LoginItem job com.apple.photostream-agent: 119: Service is disabled
    1/17/15 7:56:12.797 AM UserEventAgent[366]: user agent networkd: built Sep  9 2014 16:11:57
    1/17/15 7:56:13.843 AM UserEventAgent[366]: received an unknown event from daemon
    1/17/15 7:56:14.492 AM nsurlsessiond[373]: No directory for bundleID: com.apple.cloudd
    1/17/15 7:56:15.361 AM apsd[51]: Peer [pid=372] requested push wake but lacks APSPushWakeEntitlement
    1/17/15 7:56:17.800 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:56:17.833 AM secinitd[375]: UID[501]: cache loaded: /System/Library/Caches/com.apple.app-sandbox-cache.plist
    1/17/15 7:56:20.808 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:56:23.953 AM CalendarAgent[374]: Exception fetching ABCDContact in context <ABManagedObjectContext: 0x7fa46a629e50>: keypath birthdayComponents not found in entity <NSSQLEntity ABCDContact id=21>
    1/17/15 7:56:23.954 AM CalendarAgent[374]: Error fetching ABCDContact in context <ABManagedObjectContext: 0x7fa46a629e50>: (null) (null)
    1/17/15 7:57:44.128 AM apsd[51]: Attempt to set push wake topics without dark wake enabled: ()
    1/17/15 7:57:44.130 AM apsd[51]: Attempt to set push wake topics without dark wake enabled: ()
    1/17/15 7:57:44.132 AM apsd[51]: Attempt to set push wake topics without dark wake enabled: ()
    1/17/15 7:57:44.903 AM askpermissiond[382]: objc[382]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
    1/17/15 7:57:44.921 AM askpermissiond[382]: StoreTransport: Resetting APS Connection using environment name production
    1/17/15 7:57:45.283 AM fmfd[383]: Initialized sandbox
    1/17/15 7:57:45.555 AM com.apple.xpc.launchd[1]: (com.apple.lakitu) The JoinExistingSession key is only available to Application services.
    1/17/15 7:57:45.555 AM com.apple.xpc.launchd[1]: (com.apple.accounts.dom) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:57:45.633 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:57:46.198 AM com.apple.iCloudHelper[384]: objc[384]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
    1/17/15 7:57:46.252 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:57:46.532 AM apsd[51]: Peer [pid=383] requested push wake but lacks APSPushWakeEntitlement
    1/17/15 7:57:47.247 AM cloudd[385]: Could not create primary backing account
    1/17/15 7:57:56.509 AM identityservicesd[387]: [Warning] DeviceHeartbeat - Failed loading device heartbeat data from keychain -25300
    1/17/15 7:57:57.405 AM com.apple.xpc.launchd[1]: (com.apple.DataDetectorsDynamicData) The JoinExistingSession key is only available to Application services.
    1/17/15 7:57:57.411 AM com.apple.xpc.launchd[1]: (com.apple.FileSyncAgent.PHD.isRunning) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    1/17/15 7:57:57.413 AM com.apple.xpc.launchd[1]: (com.apple.mbloginhelper.user) This key does not do anything: OnDemand
    1/17/15 7:57:57.413 AM com.apple.xpc.launchd[1]: (com.apple.mbpluginhost.user) This key does not do anything: OnDemand
    1/17/15 7:57:57.419 AM com.apple.xpc.launchd[1]: (com.apple.secd) This key does not do anything: OnDemand
    1/17/15 7:57:57.419 AM com.apple.xpc.launchd[1]: (com.apple.secd) The ServiceIPC key is no longer respected. Please remove it.
    1/17/15 7:57:57.420 AM com.apple.xpc.launchd[1]: (com.apple.speech.speechsynthesisd) This key does not do anything: OnDemand
    1/17/15 7:57:57.422 AM com.apple.xpc.launchd[1]: (com.apple.TrustEvaluationAgent) This key does not do anything: OnDemand
    1/17/15 7:57:58.448 AM com.apple.audio.DriverHelper[391]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
    1/17/15 7:57:58.448 AM com.apple.audio.DriverHelper[391]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
    1/17/15 7:57:58.449 AM com.apple.audio.DriverHelper[391]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
    1/17/15 7:57:58.449 AM com.apple.audio.DriverHelper[391]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
    1/17/15 7:57:58.449 AM com.apple.audio.DriverHelper[391]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
    1/17/15 7:57:58.449 AM com.apple.audio.DriverHelper[391]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
    1/17/15 7:57:58.449 AM com.apple.audio.DriverHelper[391]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
    1/17/15 7:57:58.449 AM com.apple.audio.DriverHelper[391]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
    1/17/15 7:57:58.449 AM com.apple.audio.DriverHelper[391]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
    1/17/15 7:57:58.449 AM com.apple.audio.DriverHelper[391]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
    1/17/15 7:57:58.449 AM com.apple.audio.DriverHelper[391]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
    1/17/15 7:57:58.449 AM com.apple.audio.DriverHelper[391]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
    1/17/15 7:57:58.450 AM com.apple.audio.DriverHelper[391]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
    1/17/15 7:57:58.450 AM com.apple.audio.DriverHelper[391]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.wirelessproxd.
    1/17/15 7:57:58.695 AM com.apple.xpc.launchd[1]: (com.apple.appkit.xpc.sandboxedServiceRunner) The JoinExistingSession key is only available to Application services.
    1/17/15 7:57:59.801 AM coreaudiod[390]: 2015-01-17 07:57:59.801136 AM [AirPlay] BTLE discovery removing all devices
    1/17/15 7:57:59.803 AM coreaudiod[390]: 2015-01-17 07:57:59.802622 AM [AirPlay] Resetting AWDL traffic registration.
    1/17/15 7:57:59.803 AM coreaudiod[390]: 2015-01-17 07:57:59.802933 AM [AirPlay] Deregister AirPlay traffic for AWDL at MAC 00:00:00:00:00:00 with target infra non critical PeerIndication=0 err=-3900
    1/17/15 7:57:59.981 AM com.apple.xpc.launchd[1]: (com.apple.imdmessageservices.IMDMessageServicesAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:57:59.984 AM com.apple.audio.DriverHelper[391]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
    1/17/15 7:57:59.984 AM com.apple.audio.DriverHelper[391]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
    1/17/15 7:57:59.984 AM com.apple.audio.DriverHelper[391]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
    1/17/15 7:58:00.144 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:58:00.336 AM discoveryd[50]: AwdlD2d AwdlD2dStartBrowsingForKey: '_airplay' Browsing service started
    1/17/15 7:58:00.336 AM discoveryd[50]: AwdlD2d AwdlD2dStartBrowsingForKey: '_raop' Browsing service started
    1/17/15 7:58:00.390 AM coreaudiod[390]: Logging disabled
    1/17/15 7:58:00.425 AM coreaudiod[390]: 2015-01-17 07:58:00.425163 AM [AirPlay] AirPlay: Performing audio format change for 4 (AP Out) to PCM/44100/16/2 for output and  for input
    1/17/15 7:58:00.425 AM coreaudiod[390]: 2015-01-17 07:58:00.425361 AM [AirPlay] AirPlay: Performing audio format change for 4 (AP Out) to PCM/44100/16/2 for output and  for input
    1/17/15 7:58:00.457 AM logind[66]: -[SessionManager getClient:withRole:inAuditSession:]:241: ERROR: No session dictionary for audit session 100010
    1/17/15 7:58:00.457 AM logind[66]: _SMGetSessionAgent:73: ERROR: __SMGetClientForAuditSessionAgent failed 2
    1/17/15 7:58:00.457 AM IMDPersistenceAgent[394]: SACShieldWindowShowing:925: ERROR: NULL response
    1/17/15 7:58:00.854 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:58:01.140 AM bluetoothaudiod[395]: Logging disabled
    1/17/15 7:58:01.344 AM identityservicesd[387]: <IMMacNotificationCenterManager: 0x7f802358b260>: Configuring notification center for identifier: com.apple.iChat   topics: (
    1/17/15 7:58:01.447 AM identityservicesd[387]: <IMMacNotificationCenterManager: 0x7f802358b260>:    NC Disabled: NO
    1/17/15 7:58:01.453 AM identityservicesd[387]: <IMMacNotificationCenterManager: 0x7f802358b260>:   DND Enabled: NO
    1/17/15 7:58:01.453 AM identityservicesd[387]: <IMMacNotificationCenterManager: 0x7f802358b260>: Updating enabled: YES   (Topics: (
    1/17/15 7:58:01.473 AM com.apple.xpc.launchd[1]: (com.apple.imtransferservices.IMTransferAgent) The _DirtyJetsamPriority key is not available on this platform.
    1/17/15 7:58:01.473 AM com.apple.xpc.launchd[1]: (com.apple.imtransferservices.IMTransferAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:58:01.474 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:58:01.509 AM CallHistorySyncHelper[381]: [Warning] Services all disappeared, removing all dependent devices
    1/17/15 7:58:01.509 AM callservicesd[389]: [Warning] Services all disappeared, removing all dependent devices
    1/17/15 7:58:01.534 AM com.apple.xpc.launchd[1]: (com.apple.auditd[398]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.auditd
    1/17/15 7:58:01.537 AM pboard[396]: Attempt to unlink previous shared memory during startup returned an error.  Continuing...
    1/17/15 7:58:01.541 AM imagent[392]: [Warning] Services all disappeared, removing all dependent devices
    1/17/15 7:58:01.662 AM kellerct[401]: audit warning: allsoft
    1/17/15 7:58:01.663 AM kellerct[402]: audit warning: soft /var/audit
    1/17/15 7:58:01.731 AM kellerct[404]: audit warning: closefile /var/audit/20150117135558.20150117135801
    1/17/15 7:58:01.752 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:58:03.110 AM logind[66]: -[SessionManager getClient:withRole:inAuditSession:]:241: ERROR: No session dictionary for audit session 100017
    1/17/15 7:58:03.110 AM logind[66]: _SMGetSessionAgent:73: ERROR: __SMGetClientForAuditSessionAgent failed 2
    1/17/15 7:58:03.111 AM IMRemoteURLConnectionAgent[397]: SACShieldWindowShowing:925: ERROR: NULL response
    1/17/15 7:58:03.346 AM com.apple.xpc.launchd[1]: (com.apple.imtransferservices.IMTransferAgent) The _DirtyJetsamPriority key is not available on this platform.
    1/17/15 7:58:03.346 AM com.apple.xpc.launchd[1]: (com.apple.imtransferservices.IMTransferAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:58:03.347 AM com.apple.xpc.launchd[1]: (com.apple.imtranscoding.IMTranscoderAgent) The _DirtyJetsamPriority key is not available on this platform.
    1/17/15 7:58:03.347 AM com.apple.xpc.launchd[1]: (com.apple.imtranscoding.IMTranscoderAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:58:03.475 AM imagent[392]: [Warning] IMDAccount: incoming 'defaults' is not a dictionary, (null), (null)
    1/17/15 7:58:03.475 AM imagent[392]: [Warning] IMDAccount: incoming 'defaults' is not a dictionary, (null), (null)
    1/17/15 7:58:03.924 AM callservicesd[389]: Failed to get the bundle id
    1/17/15 7:58:33.479 AM com.apple.xpc.launchd[1]: (com.apple.auditd[408]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.auditd
    1/17/15 7:58:33.493 AM kellerct[412]: audit warning: soft /var/audit
    1/17/15 7:58:33.493 AM kellerct[413]: audit warning: allsoft
    1/17/15 7:58:33.494 AM kellerct[414]: audit warning: closefile /var/audit/20150117135801.20150117135833
    1/17/15 7:59:03.103 AM kellerct[419]: audit warning: soft /var/audit
    1/17/15 7:59:03.103 AM kellerct[420]: audit warning: closefile /var/audit/20150117135833.20150117135903
    1/17/15 7:59:03.105 AM kellerct[421]: audit warning: allsoft
    1/17/15 7:59:03.177 AM com.apple.xpc.launchd[1]: (com.apple.imdmessageservices.IMDMessageServicesAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:59:03.177 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:59:36.026 AM com.apple.xpc.launchd[1]: (com.apple.auditd[430]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.auditd
    1/17/15 7:59:36.036 AM kellerct[434]: audit warning: allsoft
    1/17/15 7:59:36.036 AM kellerct[433]: audit warning: soft /var/audit
    1/17/15 7:59:36.056 AM kellerct[436]: audit warning: closefile /var/audit/20150117135903.20150117135936
    1/17/15 7:59:36.657 AM WindowServer[119]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -login
    1/17/15 7:59:39.235 AM WindowServer[119]: CGXSetDisplayColorProfileAndTransfer: Display 0x04271ac0: Unit 0; ColorProfile { 532686347 }; TransferTable (256, 3)
    1/17/15 7:59:40.686 AM com.apple.AmbientDisplayAgent[162]: AmbientDisplayAgent started
    1/17/15 7:59:52.327 AM WindowServer[119]: disable_update_timeout: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
    1/17/15 7:59:52.763 AM WindowServer[119]: common_reenable_update: UI updates were finally reenabled by application "SystemUIServer" after 1.75 seconds (server forcibly re-enabled them after 1.32 seconds)
    1/17/15 7:59:54.344 AM sharingd[449]: 07:59:54.277 : Starting Up...
    1/17/15 7:59:54.350 AM sharingd[449]: 07:59:54.349 : Device Capabilities (Handoff:NO, Instant Hotspot:NO, AirDrop:NO, Legacy AirDrop:NO, Remote Disc:NO)
    1/17/15 7:59:58.399 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 7:59:58.799 AM sharingd[449]: [Warning] Services all disappeared, removing all dependent devices
    1/17/15 7:59:59.943 AM iconservicesagent[452]: iconservicesagent launched.
    1/17/15 8:00:00.665 AM Spotlight[442]: spot: agent checkin
    1/17/15 8:00:00.971 AM Spotlight[442]: connectionToService 0x6080001185d0
    1/17/15 8:00:01.215 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 8:00:01.754 AM iconservicesagent[452]: Starting service with cache path: /var/folders/kp/bghl35295gq0lksv9z_tj65w0000gn/C/com.apple.iconservices
    1/17/15 8:00:01.927 AM Finder[437]: assertion failed: 14B25: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
    1/17/15 8:00:02.172 AM SystemUIServer[429]: Cannot find executable for CFBundle 0x7f8e21515e20 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
    1/17/15 8:00:02.490 AM sharingd[449]: 08:00:02.489 : No delegate parameters from account, account exists = NO
    1/17/15 8:00:02.490 AM sharingd[449]: 08:00:02.490 : Tethering: Identifier needs fixing
    1/17/15 8:00:02.493 AM sharingd[449]: 08:00:02.492 : No delegate parameters from account, account exists = NO
    1/17/15 8:00:02.497 AM sharingd[449]: 08:00:02.496 : No delegate parameters from account, account exists = NO
    1/17/15 8:00:02.802 AM SystemUIServer[429]: Cannot find executable for CFBundle 0x7f8e215168c0 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
    1/17/15 8:00:04.460 AM com.apple.metadata.SpotlightNetHelper[453]: CGSConnectionByID: 0 is not a valid connection ID.
    1/17/15 8:00:04.460 AM com.apple.metadata.SpotlightNetHelper[453]: Invalid Connection ID 0
    1/17/15 8:00:07.583 AM WindowServer[119]: disable_update_timeout: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
    1/17/15 8:00:07.000 AM kernel[0]: Sandbox: Finder(437) System Policy: deny file-write-unlink /Users/kellerct/Library/Saved Application State/com.apple.finder.savedState/restorecount.plist
    1/17/15 8:00:11.064 AM WindowServer[119]: common_reenable_update: UI updates were finally reenabled by application "SystemUIServer" after 4.48 seconds (server forcibly re-enabled them after 1.00 seconds)
    1/17/15 8:00:12.019 AM Spotlight[442]: applications query - started
    1/17/15 8:00:13.397 AM WindowServer[119]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    1/17/15 8:00:13.408 AM WindowServer[119]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 2.09 seconds (server forcibly re-enabled them after 2.07 seconds)
    1/17/15 8:00:13.434 AM com.apple.SecurityServer[54]: Session 100022 created
    1/17/15 8:00:15.198 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 8:00:17.444 AM com.apple.xpc.launchd[1]: (com.apple.quicklook[460]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
    1/17/15 8:00:18.400 AM storeaccountd[458]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff821d2d7e0> connection from pid 453 with interface <AccountServiceInterface: 0x7ff821d2f000> (PID 453)
    1/17/15 8:00:19.767 AM Finder[437]: CoreDockSetTrashFull returned error -4956
    1/17/15 8:00:33.161 AM com.apple.xpc.launchd[1]: (com.apple.PhotoApps.AVCHDConverter) Unknown key for dictionary: EnvironmentVarialbles
    1/17/15 8:00:33.162 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 8:00:33.511 AM WindowServer[119]: CGXGetConnectionProperty: Invalid connection 38503
    1/17/15 8:00:36.958 AM Spotlight[442]: applications query - finished in 25 seconds
    1/17/15 8:00:45.091 AM iconservicesd[37]: Failed to move temp file /Library/Caches/com.apple.iconservices.store/56B5168D-6EE1-1078-094C-DF302C9E25 2E.isdata.tmp to /Library/Caches/com.apple.iconservices.store/56B5168D-6EE1-1078-094C-DF302C9E25 2E.isdata with error: Error Domain=NSCocoaErrorDomain Code=516 "“56B5168D-6EE1-1078-094C-DF302C9E252E.isdata.tmp” couldn’t be moved to “com.apple.iconservices.store” because an item with the same name already exists." UserInfo=0x7faec0c1ce50 {NSSourceFilePathErrorKey=/Library/Caches/com.apple.iconservices.store/56B5168D -6EE1-1078-094C-DF302C9E252E.isdata.tmp, NSUserStringVariant=(
        Move
    ), NSDestinationFilePath=/Library/Caches/com.apple.iconservices.store/56B5168D-6EE 1-1078-094C-DF302C9E252E.isdata, NSFilePath=/Library/Caches/com.apple.iconservices.store/56B5168D-6EE1-1078-094C -DF302C9E252E.isdata.tmp, NSUnderlyingError=0x7faec0c20620 "The operation couldn’t be completed. File exists"}
    1/17/15 8:00:45.202 AM com.apple.xpc.launchd[1]: (com.apple.ReportCrash[489]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash
    1/17/15 8:00:46.662 AM ReportCrash[489]: Attempt to read info_array in pid 486 failed, address was 8fea0edc
    1/17/15 8:00:47.005 AM ReportCrash[489]: Attempt to read info_array in pid 486 failed, address was 8fea0edc
    1/17/15 8:00:47.203 AM ReportCrash[489]: Attempt to read info_array in pid 486 failed, address was 8fea0edc
    1/17/15 8:00:47.303 AM ReportCrash[489]: Attempt to read info_array in pid 486 failed, address was 8fea0edc
    1/17/15 8:00:47.418 AM ReportCrash[489]: Attempt to read info_array in pid 486 failed, address was 8fea0edc
    1/17/15 8:00:47.420 AM ReportCrash[489]: Attempt to read info_array in pid 486 failed, address was 8fea0edc
    1/17/15 8:00:48.868 AM com.apple.xpc.launchd[1]: (com.ibm.Notes.helper.57684[484]) Service exited with abnormal code: 133
    1/17/15 8:00:48.870 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 8:00:50.893 AM WiFiAgent[478]: [NO client logger] <Sep  9 2014 16:12:26> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
    1/17/15 8:00:50.894 AM WiFiAgent[478]: [NO client logger] <Sep  9 2014 16:12:26> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiAgent
    1/17/15 8:00:52.993 AM storeaccountd[458]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff821d1b380> connection from pid 425 with interface <AccountServiceInterface: 0x7ff821d21870> (PID 425)
    1/17/15 8:00:56.590 AM Keychain Circle Notification[468]: Posted at launch: (
    1/17/15 8:00:59.357 AM ReportCrash[489]: Saved crash report for mpreload[486] version ??? to /Users/kellerct/Library/Logs/DiagnosticReports/mpreload_2015-01-17-080057_chris -kellers-imac-2.crash
    1/17/15 8:01:00.381 AM storeaccountd[458]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff821d26660> connection from pid 471 with interface <AccountServiceInterface: 0x7ff821d26a90> (PID 471)
    1/17/15 8:01:02.464 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 8:01:08.936 AM CloudKeychainProxy[493]:  __45-[UbiqitousKVSProxy doEnsurePeerRegistration]_block_invoke <UB---e-C---> ensurePeerRegistration called, success ((null))
    1/17/15 8:01:09.116 AM Keychain Circle Notification[468]: rawStatus -1, #applicants 0, #peers 0, err=Error Domain=com.apple.security.sos.error Code=2 "The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Remote error : The operation couldn‚Äôt be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call))" UserInfo=0x7fe810c50330 {NSDescription=Remote error : The operation couldn‚Äôt be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)}
    1/17/15 8:01:09.457 AM Keychain Circle Notification[468]: Checking validity of 0 notes
    1/17/15 8:01:09.459 AM Keychain Circle Notification[468]: writeToStorage plist={
        applcationDate = "0000-12-30 00:00:00 +0000";
        lastCircleStatus = "-1";
        lastWritten = "2015-01-17 14:01:09 +0000";
        pendingApplicationReminder = "4001-01-01 00:00:00 +0000";
        pendingApplicationReminderInterval = 172800;
    1/17/15 8:01:11.225 AM NotificationCenter[471]: Layout still needs update after calling -[NSView layout].  NSView or one of its superclasses may have overridden -layout without calling super. Or, something may have dirtied layout in the middle of updating it.  Both are programming errors in Cocoa Autolayout.  The former is pretty likely to arise if some pre-Cocoa Autolayout class had a method called layout, but it should be fixed.
    1/17/15 8:01:13.128 AM Fitbit Connect Menubar Helper[490]: <FBMessenger: 0x6080000a4440>: Another data is still sending. Placing send request into queue.
    1/17/15 8:01:22.339 AM Pages[485]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.1 instead of 10.10.1. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
    Call location:
    1/17/15 8:01:22.707 AM Pages[485]: 0   CarbonCore                          0x906087e7 ___Gestalt_SystemVersion_block_invoke + 135
    1/17/15 8:01:22.707 AM Pages[485]: 1   libdispatch.dylib                   0x9ac890b5 dispatch_once_f + 251
    1/17/15 8:01:22.707 AM Pages[485]: 2   libdispatch.dylib                   0x9ac8a0d8 dispatch_once + 31
    1/17/15 8:01:22.707 AM Pages[485]: 3   CarbonCore                          0x9059afb8 _Gestalt_SystemVersion + 1050
    1/17/15 8:01:22.707 AM Pages[485]: 4   CarbonCore                          0x9059ab69 Gestalt + 150
    1/17/15 8:01:22.707 AM Pages[485]: 5   SFUtility                           0x00c7af7d GetSystemVersion + 29
    1/17/15 8:01:22.707 AM Pages[485]: 6   Pages                               0x00002ede main + 62
    1/17/15 8:01:35.736 AM AppleIDAuthAgent[473]: AppleIdAuth URL: https://identity.apple.com/dsservices/dsxmlrpc
    1/17/15 8:01:37.085 AM storeassetd[501]: AssetServiceDelegate: Accepting new connection <NSXPCConnection: 0x7fb75141bd40> connection from pid 498 with interface <AssetServiceInterface: 0x7fb751410710> (PID 498)
    1/17/15 8:01:39.000 AM kernel[0]: BUG in process suhelperd[176]: over-released legacy external boost assertions (0 total, 0 external, 0 legacy-external)
    1/17/15 8:01:44.660 AM storeassetd[501]: addOperation <UpdateOperation: 0x7fb751521c00>{name = '(null)'}
    1/17/15 8:01:52.676 AM locationd[177]: Couldn't find a requirement string for masquerading client /System/Library/PrivateFrameworks/Parsec.framework
    1/17/15 8:01:53.484 AM pkd[450]: FCIsAppAllowedToLaunchExt [343] -- *** _FCMIGAppCanLaunch timed out. Returning false.
    1/17/15 8:01:54.977 AM locationd[177]: could not get apple languages array, assuming english
    1/17/15 8:01:58.753 AM storeaccountd[458]: ADI: {
        "Cache-Control" = "no-transform, max-age=5783";
        Connection = "keep-alive";
        "Content-Encoding" = gzip;
        "Content-Length" = 21198;
        "Content-Type" = "text/xml; charset=UTF-8";
        Date = "Sat, 17 Jan 2015 14:01:58 GMT";
        "Last-Modified" = "Sat, 17 Jan 2015 09:59:41 GMT";
        Server = "ATS/4.1.0";
        "Strict-Transport-Security" = "max-age=31536000";
        Vary = "Accept-Encoding, X-Apple-Store-Front, Cookie, User-Agent";
        "X-Apple-ATS-Cache-Key" = "/init.itunes.apple.com/80/WebObjects/MZInit.woa/wa/initiateSession/MacAppStore /2.0%20/143441-1/13/https/itspod=71?ix=5";
        "X-Apple-Partner" = "origin.0";
        "apple-timing-app" = "52 ms";
        "x-apple-aka-ttl" = "Generated Sat Jan 17 01:59:41 PST 2015, Expires Sat Jan 17 07:39:41 PST 2015, TTL 20400s";
        "x-apple-application-instance" = 36907;
        "x-apple-application-site" = ST11;
        "x-apple-jingle-correlation-key" = 7NX7P35WOS6TXF5G23YINVLGHI;
        "x-apple-max-age" = 14400;
        "x-apple-orig-url" = "https://init.itunes.apple.com/WebObjects/MZInit.woa/wa/initiateSession?ix=5&user AgentCacheKey=MacAppStore%2f2.0%20";
        "x-apple-request-store-front" = "143441-1,13";
        "x-apple-translated-wo-url" = "/WebObjects/MZInit.woa/wa/initiateSession?ix=5&userAgentCacheKey=MacAppStore%2 f2.0%20";
        "x-webobjects-loadaverage" = 0;
    1/17/15 8:02:08.230 AM locationd[177]: could not get apple languages array, assuming english
    1/17/15 8:02:20.274 AM storeaccountd[458]: ADI: {
        "Access-Control-Allow-Origin" = "*";
        "Cache-Control" = "private, max-age=60";
        Connection = "keep-alive";
        "Content-Length" = 2;
        "Content-Type" = "application/json; charset=UTF-8";
        Date = "Sat, 17 Jan 2015 14:02:20 GMT";
        Expires = "Sat, 17 Jan 2015 14:03:20 GMT";
        "Strict-Transport-Security" = "max-age=31536000";
        Vary = "X-Apple-Store-Front,X-Dsid,Cookie";
        "access-control-allow-credentials" = true;
        "apple-timing-app" = "0 ms";
        "x-apple-application-instance" = 10558;
        "x-apple-application-site" = NWK;
        "x-apple-jingle-correlation-key" = 3JUEEVPJFUPYEO3XLZVQSHT6KU;
        "x-webobjects-loadaverage" = 2;
    1/17/15 8:02:22.337 AM com.apple.backupd[223]: Network destination already mounted at: /Volumes/TimeMachine
    1/17/15 8:02:33.697 AM storeaccountd[458]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ff821c5e730> connection from pid 501 with interface <AccountServiceInterface: 0x7ff821c4c530> (PID 501)
    1/17/15 8:02:38.681 AM WindowServer[119]: disable_update_timeout: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
    1/17/15 8:02:40.187 AM com.apple.xpc.launchd[1]: (com.apple.StreamingUnzipService) The _DirtyJetsamPriority key is not available on this platform.
    1/17/15 8:02:40.187 AM com.apple.xpc.launchd[1]: (com.apple.StreamingUnzipService) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 8:02:41.433 AM storedownloadd[508]: DownloadServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ffe40d080e0> connection from pid 501 with interface <DownloadServiceInterface: 0x7ffe40d09c10> (PID 501)
    1/17/15 8:02:42.951 AM WindowServer[119]: common_reenable_update: UI updates were finally reenabled by application "Mail" after 5.27 seconds (server forcibly re-enabled them after 1.00 seconds)
    1/17/15 8:02:44.324 AM WindowServer[119]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    1/17/15 8:02:47.184 AM WindowServer[119]: disable_update_timeout: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
    1/17/15 8:02:49.649 AM com.apple.xpc.launchd[1]: (com.apple.quicklook[515]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
    1/17/15 8:02:49.896 AM WindowServer[119]: common_reenable_update: UI updates were finally reenabled by application "iPhoto" after 3.71 seconds (server forcibly re-enabled them after 1.00 seconds)
    1/17/15 8:02:50.915 AM com.apple.backupd[223]: Disk image already attached: /Volumes/TimeMachine/Chris Keller’s iMac.sparsebundle, DIHLDiskImageAttach returned: 35
    1/17/15 8:02:52.477 AM WindowServer[119]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 9.15 seconds (server forcibly re-enabled them after 1.00 seconds)
    1/17/15 8:02:55.119 AM WindowServer[119]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    1/17/15 8:02:55.626 AM WindowServer[119]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.51 seconds (server forcibly re-enabled them after 1.00 seconds)
    1/17/15 8:02:56.051 AM WindowServer[119]: Display 0x4271ac0 captured by conn 0x830f
    1/17/15 8:02:57.685 AM com.apple.backupd[223]: Disk image /Volumes/TimeMachine/Chris Keller’s iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
    1/17/15 8:03:05.600 AM findNames[514]: dispatch_semaphore_wait() time out: -[IMKUserDictionary reloadWithCompletionHandler:]
    1/17/15 8:03:09.145 AM apsd[51]: Peer [pid=372] requested push wake but lacks APSPushWakeEntitlement
    1/17/15 8:03:09.147 AM identityservicesd[387]: <IMMacNotificationCenterManager: 0x7f802358b260>: notification observer: com.apple.iChat   notification: __CFNotification 0x7f8023435240 {name = _NSDoNotDisturbEnabledNotification}
    1/17/15 8:03:12.864 AM identityservicesd[387]: <IMMacNotificationCenterManager: 0x7f802358b260>:    NC Disabled: NO
    1/17/15 8:03:13.765 AM identityservicesd[387]: <IMMacNotificationCenterManager: 0x7f802358b260>:   DND Enabled: YES
    1/17/15 8:03:13.765 AM identityservicesd[387]: <IMMacNotificationCenterManager: 0x7f802358b260>: Updating enabled: NO   (Topics: (null))
    1/17/15 8:03:15.085 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 8:03:26.274 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 8:03:32.237 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 8:03:33.955 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 8:03:35.114 AM com.apple.xpc.launchd[1]: (com.apple.quicklook.satellite.56EAB7C9-0C8F-4B87-9812-6B4934BB8288[522]) Service exited due to signal: Killed: 9
    1/17/15 8:03:47.274 AM WindowServer[119]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    1/17/15 8:03:48.221 AM WindowServer[119]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.95 seconds (server forcibly re-enabled them after 1.00 seconds)
    1/17/15 8:03:48.558 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 8:03:58.043 AM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    1/17/15 8:04:02.423 AM QuickLookSatellite[528]: Failed to obtain sandbox extension for path=/Users/kellerct/Library/Caches/com.apple.quicklook.satellite. Errno:1
    1/17/15 8:04:03.355 AM QuickLookSatellite[528]: Failed to obtain sandbox extension for path=/Users/kellerct/Library/Caches/com.apple.quicklook.satellite. Errno:1
    1/17/15 8:04:14.086 AM com.apple.xpc.launchd[1]: (com.apple.quicklook.satellite.56EAB7C9-0C8F-4B87-9812-6B4934BB8288[528]) Service exited due to signal: Killed: 9
    1/17/15 8:04:19.644 AM WindowServer[119]: disable_update_timeout: UI updates were forcibly disabled by application "Dropbox" for over 1.00 seconds. Server has re-enabled them.
    1/17/15 8:04:21.323 AM WindowServer[119]: common_reenable_update: UI updates were finally reenabled by application "Dropbox" after 2.68 seconds (server forcibly re-enabled them after 1.00 seconds)
    1/17/15 8:04:39.152 AM apsd[51]: Peer [pid=372] requested push wake but lacks APSPushWakeEntitlement
    1/17/15 8:04:39.152 AM identityservicesd[387]: <IMMacNotificationCenterManager: 0x7f802358b260>: notification observer: com.apple.iChat   notification: __CFNotification 0x7f8023594a30 {name = _NSDoNotDisturbDisabledNotification}
    1/17/15 8:04:40.740 AM WindowServer[119]: Display 0x4271ac0 released by conn 0x830f
    1/17/15 8:04:40.902 AM identityservicesd[387]: <IMMacNotificationCenterManager: 0x7f802358b260>:    NC Disabled: NO
    1/17/15 8:04:40.909 AM identityservicesd[387]: <IMMacNotificationCenterManager: 0x7f802358b260>:   DND Enabled: NO
    1/17/15 8:04:40.909 AM identityservicesd[387]: <IMMacNotificationCenterManager: 0x7f802358b260>: Updating enabled: YES   (Topics: (
    1/17/15 8:04:46.000 AM kernel[0]: fsevents: watcher dbfseventsd (pid: 542) - Using /dev/fsevents directly is unsupported.  Migrate to FSEventsFramework
    1/17/15 8:04:55.896 AM pkd[450]: UNINSTALLED:com.getdropbox.dropbox.garcon com.getdropbox.dropbox.garcon(1.7) 40AFE2D2-8557-4B8B-9844-3A767C1434E1 /Applications/Dropbox.app/Contents/PlugIns/garcon.appex
    1/17/15 8:04:55.925 AM pkd[450]: INSTALLED:com.getdropbox.dropbox.garcon com.getdropbox.dropbox.garcon(1.7) <__NSConcreteUUID 0x7fde10ca7cb0> 6301D176-51BE-49D5-98E7-67E1B12813C1 /Applications/Dropbox.app/Contents/PlugIns/garcon.appex
    1/17/15 8:04:59.601 AM CoreServicesUIAgent[457]: unexpected message <OS_xpc_error: <error: 0x7fff78ae9c60> { count = 1, contents =
      "XPCErrorDescription" => <string: 0x7fff78ae9f70> { length = 18, contents = "Connection invalid" }
    }>
    1/17/15 8:04:59.688 AM com.apple.xpc.launchd[1]: (com.apple.quicklook.satellite.D7A66065-B379-44F2-9D2E-2AC374FAEFAF[536]) Service exited due to signal: Killed: 9
    Thanks again for your help.

  • Query can run in Oracle 10g but very slow in 11g

    Hi,
    We've just migrated to Oracle 11g and we noticed that some of our view are very slow (it takes seconds in 10g and takes 30 minutes in 11g), and the tables are using the local table.
    Do any of you face the same issue?
    This is our query:
    SELECT
    A.wellbore
    ,a.depth center
    ,d.MD maxbc
    ,d.XDELT xbc
    ,d.YDELT ybc
    ,e.MD minac
    ,e.XDELT xac
    ,e.YDELT yac
    from
    table_A d,table_A e, table_B a
    where a.wellbore = d.WELLBORE (+)
    and a.wellbore = e.WELLBORE(+)
    and d.MD = (select max(MD) from table_A b where b.MD < a.depth and
    d.wellBORE = b.wellBORE)
    and e.md = (select min(md) from table_A c where c.MD > a.depth and
    e.wellBORE = c.wellBORE);

    Thanks I will move to the correct one..
    Rafi,
    Build the Indexes and it is still slow. I am querying from a view from another database, which is in 10g instances.
    Moved: Query can run in Oracle 10g but very slow in 11g
    Edited by: 924400 on Apr 1, 2012 6:03 PM
    Edited by: 924400 on Apr 1, 2012 6:26 PM

  • Oracle 11G - Update is very slow on View

    I have big trouble with some Update query on Oracle 11G.
    I have a set of tables (5) of identical structures and a view that consists in an UNION ALL of the 5 tables.
    None of this table contains more than 20 000 rows.
    Let's call the view V_INTE_NE. Each of the basic table has a PRIMARY KEY defined on 3 NUMBERS(10,0) -> INTE_REF / NE_REF / INSTANCE.
    Now, I get 6 rows in another table and I want to update my view from the data of this small table (let's call it SMALL). This table has the 3 columns INTE_REF / NE_REF / INSTANCE.
    When I try to join the two tables :
    SELECT * FROM T_INTE_NE T2
    WHERE EXISTS ( SELECT 1 FROM SMALL T1 WHERE T2.INTE_REF = T1.INTEREF AND T2.NE_REF = T1.NEREF AND T2.INTE_INST = T1.INSTANCE )
    I get the 6 lines in 0.037 seconds
    When I try to update the view (I have an INSTEAD OF trigger that does nothing (just return for testing even without modifying anything), I execute the following query :
    UPDATE T_INTE_NE T2
    SET INTE_STATE = -11 WHERE
    EXISTS ( SELECT 1 FROM SMALL T1 WHERE T2.INTE_REF = T1.INTEREF AND T2.NE_REF = T1.NEREF AND T2.INTE_INST = T1.INSTANCE )
    The 6 rows are updated (at least TRIGGER is called) in 20 seconds.
    However, in the execution plan, I can't see where Oracle takes time to achieve the query :
    Plan hash value: 907176690
    | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
    | 0 | UPDATE STATEMENT | | 6 | 36870 | 153 (1)| 00:00:02 |
    | 1 | UPDATE | T_INTE_NE | | | | |
    |* 2 | HASH JOIN RIGHT SEMI | | 6 | 36870 | 153 (1)| 00:00:02 |
    | 3 | TABLE ACCESS FULL | SMALL | 6 | 234 | 9 (0)| 00:00:01 |
    | 4 | VIEW | T_INTE_NE | 6 | 36636 | 143 (0)| 00:00:02 |
    | 5 | VIEW | X_V_T_INTE_NE | 6 | 18636 | 143 (0)| 00:00:02 |
    | 6 | UNION-ALL | | | | | |
    | 7 | TABLE ACCESS FULL| SECNODE1_T_INTE_NE | 1 | 3106 | 60 (0)| 00:00:01 |
    | 8 | TABLE ACCESS FULL| SECNODE2_T_INTE_NE | 1 | 3106 | 60 (0)| 00:00:01 |
    | 9 | TABLE ACCESS FULL| SECNODE3_T_INTE_NE | 1 | 3106 | 2 (0)| 00:00:01 |
    | 10 | TABLE ACCESS FULL| SECNODE4_T_INTE_NE | 1 | 3106 | 2 (0)| 00:00:01 |
    | 11 | TABLE ACCESS FULL| SECNODE5_T_INTE_NE | 1 | 3106 | 2 (0)| 00:00:01 |
    | 12 | TABLE ACCESS FULL| SYS_T_INTE_NE | 1 | 3106 | 17 (0)| 00:00:01 |
    Predicate Information (identified by operation id):
    2 - access("T2"."INTE_REF"="T1"."INTEREF" AND "T2"."NE_REF"="T1"."NEREF" AND
    "T2"."INTE_INST"="T1"."INSTANCE")
    Note
    - dynamic sampling used for this statement (level=2)
    Statistics
    3 user calls
    0 physical read total bytes
    0 physical write total bytes
    0 spare statistic 3
    0 commit cleanout failures: cannot pin
    0 TBS Extension: bytes extended
    0 total number of times SMON posted
    0 SMON posted for undo segment recovery
    0 SMON posted for dropping temp segment
    0 segment prealloc tasks
    What could explain the difference ?
    I get exactly the same execution plan (when autotrace is ON).
    Furthermore, if I try to do the same update on each of the basic tables, I get the rows updated instantaneously.
    Is there any reason for avoiding this kind of query ?
    Any help would be greatly appreciated :-)
    Regards,
    Patrick

    Sorry for this, I lost myself in conjonctures and I didn't think I would have to explain the whole case.
    So, I wrote a small piece of PL/SQL that reproduces the same issue.
    It seems that my issue is not due to the UPDATE but to the use of the IN predicate.
    As you can see at the end of the script, I try to join the 2 tables using different technics.
    The first query is very fast, the second is very slow.
    I need the second one if I want to do any update.
    DROP TABLE Part1;
    DROP TABLE Part2;
    DROP TABLE Part3;
    DROP TABLE Part4;
    CREATE TABLE Part1 ( Key1 NUMBER(10, 0), Key2 NUMBER(10, 0), Key3 NUMBER(10, 0), PartId NUMBER(10, 0) DEFAULT( 1 ) NOT NULL, Data1 VARCHAR2(1000), X_Data2 VARCHAR2(2000) NULL, X_Data3 VARCHAR2(2000) NULL, CONSTRAINT PK_Part1 PRIMARY KEY( Key1, Key2, Key3 ) );
    CREATE TABLE Part2 ( Key1 NUMBER(10, 0), Key2 NUMBER(10, 0), Key3 NUMBER(10, 0), PartId NUMBER(10, 0) DEFAULT( 2 ) NOT NULL, Data1 VARCHAR2(1000), X_Data2 VARCHAR2(2000) NULL, X_Data3 VARCHAR2(2000) NULL, CONSTRAINT PK_Part2 PRIMARY KEY( Key1, Key2, Key3 ) );
    CREATE TABLE Part3 ( Key1 NUMBER(10, 0), Key2 NUMBER(10, 0), Key3 NUMBER(10, 0), PartId NUMBER(10, 0) DEFAULT( 3 ) NOT NULL, Data1 VARCHAR2(1000), X_Data2 VARCHAR2(2000) NULL, X_Data3 VARCHAR2(2000) NULL, CONSTRAINT PK_Part3 PRIMARY KEY( Key1, Key2, Key3 ) );
    CREATE TABLE Part4 ( Key1 NUMBER(10, 0), Key2 NUMBER(10, 0), Key3 NUMBER(10, 0), PartId NUMBER(10, 0) DEFAULT( 4 ) NOT NULL, Data1 VARCHAR2(1000), X_Data2 VARCHAR2(2000) NULL, X_Data3 VARCHAR2(2000) NULL, CONSTRAINT PK_Part4 PRIMARY KEY( Key1, Key2, Key3 ) );
    CREATE OR REPLACE FUNCTION Decrypt
    x_in IN VARCHAR2
    ) RETURN VARCHAR2
    AS
    x_out VARCHAR2(2000);
    BEGIN
    SELECT REVERSE( x_in ) INTO x_out FROM DUAL;
    RETURN ( x_out );
    END;
    CREATE OR REPLACE VIEW AllParts AS
    SELECT Key1, Key2, Key3, PartId, Data1, Decrypt( X_Data2 ) AS Data2, Decrypt( X_Data3 ) AS Data3 FROM Part1
    UNION ALL
    SELECT Key1, Key2, Key3, PartId, Data1, Decrypt( X_Data2 ) AS Data2, Decrypt( X_Data3 ) AS Data3 FROM Part2
    UNION ALL
    SELECT Key1, Key2, Key3, PartId, Data1, Decrypt( X_Data2 ) AS Data2, Decrypt( X_Data3 ) AS Data3 FROM Part3
    UNION ALL
    SELECT Key1, Key2, Key3, PartId, Data1, Decrypt( X_Data2 ) AS Data2, Decrypt( X_Data3 ) AS Data3 FROM Part4;
    DROP TABLE Small;
    CREATE TABLE Small ( Key1 NUMBER(10, 0), Key2 NUMBER(10, 0), Key3 NUMBER(10, 0), Data1 VARCHAR2(1000) );
    BEGIN
    DECLARE
    n_Key NUMBER(10, 0 ) := 0;
    BEGIN
    WHILE ( n_Key < 50000 )
    LOOP
    INSERT INTO Part1( Key1, Key2, Key3 )
    VALUES( n_Key, FLOOR( n_Key / 10 ), FLOOR( n_Key / 100 ) );
    INSERT INTO Part2( Key1, Key2, Key3 )
    VALUES( n_Key, FLOOR( n_Key / 10 ), FLOOR( n_Key / 100 ) );
    INSERT INTO Part3( Key1, Key2, Key3 )
    VALUES( n_Key, FLOOR( n_Key / 10 ), FLOOR( n_Key / 100 ) );
    INSERT INTO Part4( Key1, Key2, Key3 )
    VALUES( n_Key, FLOOR( n_Key / 10 ), FLOOR( n_Key / 100 ) );
    n_Key := n_Key + 1;
    END LOOP;
    INSERT INTO Small( Key1, Key2, Key3, Data1 ) VALUES ( 1000, 100, 10, 'Test 1000' );
    INSERT INTO Small( Key1, Key2, Key3, Data1 ) VALUES ( 3000, 300, 30, 'Test 3000' );
    INSERT INTO Small( Key1, Key2, Key3, Data1 ) VALUES ( 5000, 500, 50, 'Test 5000' );
    COMMIT;
    END;
    END;
    SELECT T2.*
    FROM Small T1, AllParts T2
    WHERE T2.Key1 = T1.Key1 AND T2.Key2 = T1.Key2 AND T2.Key3 = T1.Key3;
    SELECT T1.*
    FROM AllParts T1
    WHERE ( T1.Key1, T1.Key2, T1.Key3 ) IN ( SELECT T2.Key1, T2.Key2, T2.Key3 FROM Small T2 );

  • AE CS4 on OSX 10.5 Very Slow, Makes System Unresponsive

    This is very frustrating, our company has been fighting this problem since we upgraded.  I work for a major broadcaster which uses AE for all our motion graphics work.  Since upgrading to CS4 we've experienced a team wide decrease in productivity.  AE CS4 renders slower than CS3 and in some cases will completely lock up the computer when rendering, making it impossible to do any sort of simple multitasking.  Even switching to the Finder and moving around windows is very slow.  Let alone try to use Safari or type into a TextEdit document.  We've tried everything, but details first.
    We're running on last-gen 8-core 3.2GHz Mac Pro's.  Each has 10GB of ram and 1TB of HD space (mostly empty).  NVidia GeForce 8800 GT video card.  Runing AE 9.0.2.42)
    We realize that 10GB is not enough ram to use all 8 processors at full speed.  So AE is set to use multiprocessing with a max of 3 cores with 2GB minimum with 2 GB in reserve for other applications.  All the work we do is with HD footage.  All footage is delivered in Apple Prores.  Any comp of medium or greater complexity will completely slow down the system.  When comparing CS3 rendering time to CS4, CS4 seems about 30-40% slower. When rendering CS4 will also completely lock up the system, switching windows is a complete pain.  We've tried turing on and off OpenGL in AE, but no change.  We're tried every combination of settings we can think of.   Rendering without multiprocessing is even slower and still locks up the system. Also in Activity Monitor is will often show only limited CPU useage (see attached screen).  You can see I'm running multiple aeselflink instances, but each one is no where near 100 and the system is still unresponsive!
    Outside of rendering CS4 also is much more unresponsive when just working (not rendering).  Moving clips around in the composition window and navigating the timeline are sometimes a chore, with lots of 1-2 second delays before taking the action.  Or slow screen updates.
    Any ideas what is happening here?  If is something with the change from 32-bit to 64-bit.  Will more ram fix it or is there something else going on?  This is becoming a very frustrating situations where we have to completely restart the computer and make sure no other apps are running before even trying to render our anything.  CS3 did not seem to have these problems, even with multiprocessing turned on at it's default settings.  We like many of the new features in CS4 and are practically required to use it because we get a lot of projects from vendors, but it's proving very slow to work in. 

    I don't know how complex your comps are, but our are usually pretty complex.  Simple comps with just text and 1-2 layers of video usually go pretty quick, but as soon as you ramp up complexity it slows way down.  I somehow don't think that our graphics card is the problem.  Most of the plugins we use do not see any benefit from OpenGL and we don't use that many 3D layers.  In general we haven't seen a big boost in AE performance with OpenGL on or off.  All our footage sits on a super fast Terrablock system with at least 300-400mb/s sequential read speeds.  Then again it could be that AE just runs poorly on Macs.
    Adolfo - we have done some quite extensive benchmarks with all our machines here.  Configuring both 10GB and 16GB versions (we have not tried higher memory yet).  We tested the same comp in both CS3 and CS$ with various multiprocessor settings.  Our test file's complexity was indicative of the kind of projects we do.  Around 30 layers, a mix of TGA sequences with alpha, QuickTimes with alpha (animation) and ProRes footage.  Many layers with ReelSmart Motion Blur.  A Knoll Light Factory lens flare.  A mix of layers with various blurs and color correction and some transfer modes.
    As you can see CS3 was much, much quicker at rendering the project.  In some cases almost twice as fast as CS4.  Also, strangely CS3 ran better limited to 4 processors in both the 10GB and 16GB configurations. 
    Benchmark Test File
    CS3 Benchmarks
    [note - CS3 has no options in the app for adjusting multi-processor settings.  All edits had to be made in the pref file.]
    10GB System -----------------
    AE CS3
    10GB
    4 Processors
    12m 43s
    [note - This was the most optimized setting for CS3 which gave the best performance for us.]
    AE CS3
    10BG
    8 Processors
    24m 8s
    [note - Default setting in AE CS3 for multiprocessor.  System is completely unusable during render.]
    16GB System -----------------
    AE CS3
    16GB
    4 Processors
    11m 54s
    [note - This was the optimized setting for CS3 which gave the best performance.  Each instance of the program was using 150-180 CPU in the activity monitor so it must be using more that 4 processors with this setting.  Each processor used more memory than in the 10GB config.]
    AE CS3
    16GB
    7 Processors
    16m 15s
    AE CS3
    16BG
    8 Processors
    20m 13s
    [note - Default setting in AE CS3 for multiprocessor.  System is completely unusable during render.]
    CS4 Benchmarks
    In general CS4 is about half the speed of an optimized CS3.  Going from 10GB to 16GB of memory gained us about 33% performance increase in the most optimized setting (4-6 processors at 2GB+ per processor).
    10GB System -----------------
    AE CS4
    10GB total RAM
    8GB reserved for AE (2GB reserved for OS)
    3 Processors (2GB per processor)
    24m 7s
    [note - Computer response pretty slow]
    AE CS4
    10GB total RAM
    8GB reserved for AE (2GB reserved for OS)
    7 Processors (.9GB per processor)
    28m 10s
    [note - Computer completely unusable while rendering]
    16GB System -----------------
    AE CS4
    16GB total RAM
    8GB reserved for AE (8GB reserved for OS)
    3 Processors (2GB per processor)
    22m 57s
    AE CS4
    16GB total RAM
    13GB reserved for AE (3GB reserved for OS)
    4 Processors (2.33+ GB per processor)
    18m 7s
    AE CS4
    16GB total RAM
    13GB reserved for AE (3GB reserved for OS)
    6 Processors (2.09 GB/Processor)
    19m 1s
    AE CS4
    16GB total RAM
    14GB reserved for AE (2GB reserved for OS)
    7 Processors (1.85GB/Processor)
    23m 4s
    [note - This config made system very slow, left very little memory for the system.]
    AE CS4
    16GB total RAM
    13GB reserved for AE (3GB reserved for OS)
    7 Processors (1.59GB/Processor)
    25m 50s

  • Very slow broadband.

    Been having very slow broadband for a few days ( cant watch videos etc ) but its ok to browes slowley. I have a home hub and my laptop is connected via an earthlink cable. Done a speed test and will post results below. Can anyone tell me how to speed my broadband up?
    Thanks in advance
    Aston
    FAQ
    Test1 comprises of two tests
    1. Best Effort Test: -provides background information.
    Download  Speed
    534 Kbps
    0 Kbps
    1000 Kbps
    Max Achievable Speed
     Download speedachieved during the test was - 534 Kbps
     For your connection, the acceptable range of speeds is 400-1000 Kbps.
     Additional Information:
     Your DSL Connection Rate :696 Kbps(DOWN-STREAM), 888 Kbps(UP-STREAM)
     IP Profile for your line is - 613 Kbps
    2. Upstream Test: -provides background information.
    Upload Speed
    679 Kbps
    0 Kbps
    888 Kbps
    Max Achievable Speed
    >Upload speed achieved during the test was - 679 Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 888 Kbps
    We were unable to identify any performance problem with your service at this time.
    It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
    If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
    Solved!
    Go to Solution.

    Quiet line test ok, do have other wall sockets,but dont use them.
    ADSL line status
    Connection information
    Line state
    Connected
    Connection time
    16 days, 0:48:32
    Downstream
    698 Kbps
    Upstream
    888 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.5
    Latency type
    Interleave
    Noise margin (Down/Up)
    30.6 dB / 7.3 dB
    Line attenuation (Down/Up)
    39.0 dB / 21.6 dB
    Output power (Down/Up)
    17.0 dBm / 12.3 dBm
    Loss of Framing (Local)
    0
    Loss of Signal (Local)
    0
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    0 / 1861
    CRC Errors (Down/Up)
    150 / 2147480001
    HEC Errors (Down/Up)
    56 / 104870
    Error Seconds (Local)
    535

  • SAP Server is very slow

    Hello Gurus,
    The central instance nn SAP productive system doesnu2019t seem to be responding.
    A lot of TIME_OUT runtime errors have occurred and still occuring.
    RFC's are on hold and system seems to be performing very very slow
    There are many work processes are in hold status 
    Thanks & Regards
    Shishir

    hello rohit
    An issue with the SAP Gateway which was running but not working correctly
    For that reason no RFC or any other outgoing connection was working
    Once we tried to restart the gateway the server, it crashed
    Please let me know what are the corrective action, and from where I can found the appropriate logs for the same.
    Thanks & Regards
    Shishir

  • Bpel control console opens very slow (10.1.3.4)

    Hi
    I have Oracle SOA Suite 10.13.4 (+ MLR #7 patch) installed at HP-UX itanium server. From the past two days, bpel console takes too much time open on almost every page. Few days before this problem started i had changed the JVM settings by increasing the count to 2 (from em cosole) for improving performance, but that made bpel console very slow. So i decided to revert back the JVM settings and made JJVM to 1 again for oc4j_soa and then restarted the server. Bt even now the bpel cosnsole takes ages to open (almost a minute) for every page of console.
    The AS control cosole and web service manager console works fine and this issue is with bpel console only.
    There is no load on server at present.
    Please let me know how i can trace out the root cause for this issue. Is there any way i can increase logging level for the bpel console application and where i can view that log ?
    Thanks.

    Please ask your DBA to check how ur Dehydration repository is behaving. Worth checking ORABPEL and ORAESB schemas.
    To me, you might need to purge instances and related data. But please check with DBA first.
    Also, while opening BPEL Console, monitor Memory/CPU on Application server and DB server.
    They may give some hint.
    You can also use tool like JRMC, JUnit etc to see the JVM usage.
    regds,
    www.ibiztrack.com

  • I was getting support for my Office 2008 for Mac, and the support tech said my OS was very slow. I have latest update for Snow10.6.7. Question how can I speed up my Macbook?

    I was getting support for my Office 2008 for Mac, and the support tech said my OS was very slow. I have latest update for Snow10.6.7. Question; How can I speed up my Macbook?

    Hi
    In the first instance, I'd use Onyx and run through its sequence of maintenance and tune up tools:
    Verify, Maintenance, Cleaning.
    I'd also reset the SMC and PRAM (Google them)
    If that doesn't help then I'd look at System Preferences.. > Accounts > Login Items tab (not Login Options).  Check what processes get started at login and decide which ones you don't want.
    After that I'd use Applications/Utilities/Activity Monitor to see if any processes are using a lot of computer power or if anything else nasty might be happening.
    If none of this helped then my final step would be to reinstall OS X.
    Bob

Maybe you are looking for

  • Example to use Query String in Oracle Access Manager Policy.

    Hi All, Can any one please tell me what is the use of Query String and Query String Variable in OAM Policy? If possible please explain with a sample example. Thanks in Advance. Siva Pokuri.

  • 6585 with ddr400 problems

    My MSI board wont boot with TwinMos 3200 DDR 400 Cas 2.5 RAM. I can however underclock the RAM to about 350MHz and get the system to boot. I've been reading posts similar to this and people came to the same kind of conclusion. Will MSI/Can MSI do som

  • Passing Field Symbols in subroutines

    Hi all, Can any body tell me how to pass field symbols in a suboutine and will that effect orignal value of that symbl if i change it in subroutine. Any Help will be awarded. <b>Sachin</b>

  • Help on Business Scenario Configuration Guide for SRM Server 5.5

    hai friends where can i get Business Scenario Configuration Guide.for Version SRM server 5.5 i found for 4.0 and 5.0 but not for 5.5 Please let me know the link of market place thanks Regards Krishna

  • Password protecting certain pages?

    Hi - Does anyone know if it's possible to password protect all pages bar your homepage? I'd like to be able to do this whilst I'm trying to update my site but still wanted visitors to be able to access my home page. Thanks all.