INSTANCE MISSING IN SAPMMC

Hi to all
Please, help me with the following issue:
I have two intsnces: 02 y 03, which one I view in SAPMMC.
By a software installation, I have that restart the server, but, when I start the SAP services,.... surprise !!: Don't appear my 03 instance, and this is my main instance ,...
I have review all the log, the services,.. but i don't know why this instance don't appear in SAPMMC, and the server is down,.
Please, help me with this problem
Regards
Dario Rodriguez.

Hi, I have a similar problem. I tried to connect to SAP Server from my PC and I couldn't do it, I went to the server and it was restarted (maybe a power failure). I opened the MMC and 2 of my instances had disappeared (of 3 instances).
When windows 2003 server starts it shows the next message:
At least one service or driver failed during system startup. Use Event Viewer to examine the event log for details.
I opened the services and looked for the sap services, one was stopped SAPR36_00 then I tried to start it and the following message appears:
Could not start the SAPR36_00 service on Local Computer.
Error 5: Access is denied.
I have read the SAP Notes 82751 and 142100. I checked both share folders permissions SAPMNT or SAPLOC. I also checked the that the SAPSTARTSRV.EXE has the permissions of the user that start the service.
I did what Arun VK says but when I run SAPSTART.EXE, it doesn't show anything. I also check the dll files and i didn't find librfc32.dll in my server.
Someone can help me with this problem I would really appreciate it.

Similar Messages

I cann't find the instance under the SAPMMC ?

Hi, every expert,
I installed a SAP IDES4.71 on my windows XP system,
but now I couldn't find the instance under the SAPMMC ,
Could u tell me how to get it back ?
Thank you very much in advance,
B.R
Michael

Hi, everyone, thanks for all your reply !
After I run the sapstartsrv.exe, when I start the service 'SAPSID_00', It appears the error information as below:
" Cann't start the service 'SAPSID_00' on local computer ,
Error 1069: cann't start the service due to log on failed "
who can tell me that's why ?
B.R
Michael

Instance missing in BPEL console

Hi,
I have a process say "THIRD", it has database adapters and exception handling for each scope as well. In the case of any exception in "THIRD", the process calls the another process say "EMAIL" which is only meant for e-mail notification.
Now the situation:
When sometimes the process name "THIRD" is invoked from client(Oracle Apps/BES) first time in the morning and if any of the DB adapter throws exception, the instance of "EMAIL" is created and send the mail too. But if we try to find out the instance of "THIRD" which cause the problem is missing in BPEL Console.
Moreover, it happens only first time in the morning and doesn't happen everyday.
Thanks in advance.
---Janit

Is your BPEL deployed on OC4J?
Described property is here
<ORAHOME>\integration\orabpel\system\appserver\oc4j\j2ee\home\config\server.xml
restart OC4J. Check also BPEL domain parameter syncMaxWaitTime (From BPEL Console-> Manage BPEL Domain). syncMaxWaitTime should be less than transaction-config timeout. Otherwise it is not working properly.
<snip>
<?xml version="1.0"?>
<!DOCTYPE application-server PUBLIC "-//Oracle//DTD OC4J Application-server 9.04//EN" "http://xmlns.oracle.com/ias/dtds/application-server-9_04.dtd">
<application-server application-directory="../applications"
check-for-updates="false"
deployment-directory="../application-deployments"
connector-directory="../connectors"
>
 <rmi-config path="./rmi.xml" />
 <jms-config path="./jms.xml" />
 <j2ee-logging-config path="./j2ee-logging.xml" />
 <log>
 <file path="../log/server.log" />
 </log>
 <transaction-config timeout="60000" />
</snip>

CAL Instance missing all the times I login (region EU)

I've created the instance and all seemed fine.
I suspended and logged off.
I logged in again and the instance was missing. Created again, logged out automatically by the system after some time. Logged again and the instance is missing again !!!
Any idea why ?
Much appreciated.
Walter

Hi,
the solution is
SAP Business Warehouse 7.4 SP5 incl. SAP Business Objects BI 4.1 SP2 on SAP HANA 1.0 SP7
It happened today but also 3 days. ago.
I just noticed because I've logged again and I've found no instance created few days ago.
How can I reply in private and send my ID ?
Regards
W.

Central Service Instance missing after Additional App server was installed

Hi Experts
I had installed SAP Netweaver CE7.1 system in 2 machines as distributed system.
I did installation as follow:
1. Install MSSQL server native access client in machine 1
2. Install DB server in machine 2
3. Install SCS in machine 1
4. Install DB instance in machine 2
5. Install PAS in machine 1
The installation had been fine. I had checked by confirming at the MMC. In machine 1, I could see SCS, PAS and DB running. I had also logged on into portal and NWA.
Then I installed Additional App server in machine 2.
Howerver, in the end of the installation it said that the installation has been stopped.
Later when I see the MMC, I found that I could see DB, PAS and AAS only. SCS was missing and
the system could not start.
I am very much looking forward to hearing from you what went wrong during the installation of AAS.
The log generated in the sapinst.log is really long. I got server error when I put the log data in this message. I can send it through mail if need be.
Regards,
Sudeep

problem solved

SCCM Report Services Instance missing

Hi,
Been trying to troubleshoot this for a day and had already done the following:
1.
http://myitforum.com/myitforumwp/2012/10/10/reporting-services-site-role-setup-instance-blankempty/
2. Reinstalled reporting services on SQL Database Server
3.
https://social.technet.microsoft.com/Forums/en-US/4479e73e-8a19-4c7e-9418-b36770656b9b/action?threadDisplayName=sccm-2012-reporting-point-server-instance-blank
I'm not sure what I am missing but regardless after restarting countless times and troubleshooting, I still can't get the reporting services setup on our SCCM 2012 server. The database is SQL 2012 SP1. Both are on a different VM instance. I'm getting a blank
value on the Reporting point server instance.
The good part is I can get the website working but getting the reports via web by opening it on the reports services manager on the SQL server. Other than that, I am stuck between a rock and a hard place.
Any suggestion?

Here is another part of the log:
configmanager!DefaultDomain!119c!11/19/2014-13:46:05:: i INFO: Using report server internal url
http://localhost:80/ReportServer_SCCM.
configmanager!DefaultDomain!119c!11/19/2014-13:46:05:: i INFO: Using report server external url
http://SPQES3489:80/ReportServer_SCCM.
configmanager!DefaultDomain!119c!11/19/2014-13:46:05:: i INFO: Using url root
http://SPQES3489:80/ReportServer_SCCM.
rshost!rshost!119c!11/19/2014-13:46:05:: i INFO: Configuring maxPhysicalCpu=4, minLogicalCpu=0
rshost!rshost!119c!11/19/2014-13:46:05:: i INFO: Logical processor per physical processor 4
rshost!rshost!119c!11/19/2014-13:46:05:: i INFO: Logical processor per core 1
rshost!rshost!119c!11/19/2014-13:46:05:: i INFO: Maximum logical CPU is 4
configmanager!DefaultDomain!119c!11/19/2014-13:46:05:: i INFO: Using report server internal url
http://localhost:80/ReportServer_SCCM.
configmanager!DefaultDomain!119c!11/19/2014-13:46:05:: i INFO: Using report server external url
http://SPQES3489:80/ReportServer_SCCM.
configmanager!DefaultDomain!119c!11/19/2014-13:46:05:: i INFO: Using url root
http://SPQES3489:80/ReportServer_SCCM.
library!DefaultDomain!119c!11/19/2014-13:46:05:: i INFO: SQLDump flags: ReferencedMemory, AllThreads, SendToWatson
library!DefaultDomain!119c!11/19/2014-13:46:05:: i INFO: MiniDump flags: DataSegs, UnloadedModules, ProcessThreadData
library!DefaultDomain!119c!11/19/2014-13:46:05:: i INFO: Dump on: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException
library!DefaultDomain!119c!11/19/2014-13:46:05:: i INFO: Do not dump on: System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException,Microsoft.ReportingServices.WmiProvider.WMIProviderException
library!DefaultDomain!119c!11/19/2014-13:46:05:: i INFO: Minidump location: C:\Program Files\Microsoft SQL Server\MSRS11.SCCMINT\Reporting Services\Logfiles
appdomainmanager!DefaultDomain!119c!11/19/2014-13:46:06:: i INFO: Appdomain:2 WindowsService_0 started.
library!WindowsService_0!119c!11/19/2014-13:46:07:: i INFO: SQLDump flags: ReferencedMemory, AllThreads, SendToWatson
library!WindowsService_0!119c!11/19/2014-13:46:07:: i INFO: MiniDump flags: DataSegs, UnloadedModules, ProcessThreadData
library!WindowsService_0!119c!11/19/2014-13:46:07:: i INFO: Dump on: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException
library!WindowsService_0!119c!11/19/2014-13:46:07:: i INFO: Do not dump on: System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException,Microsoft.ReportingServices.WmiProvider.WMIProviderException
library!WindowsService_0!119c!11/19/2014-13:46:07:: i INFO: Minidump location: C:\Program Files\Microsoft SQL Server\MSRS11.SCCMINT\Reporting Services\Logfiles
resourceutilities!WindowsService_0!119c!11/19/2014-13:46:07:: i INFO: Reporting Services starting SKU: Standard
library!WindowsService_0!1084!11/19/2014-13:46:07:: i INFO: Catalog SQL Server Edition = Standard
crypto!WindowsService_0!1084!11/19/2014-13:46:07:: i INFO: Initializing crypto as user: NT SERVICE\ReportServer$SCCMINT
crypto!WindowsService_0!1084!11/19/2014-13:46:07:: i INFO: Exporting public key
crypto!WindowsService_0!1084!11/19/2014-13:46:07:: i INFO: Performing sku validation
crypto!WindowsService_0!1084!11/19/2014-13:46:07:: i INFO: Importing existing encryption key
dbpolling!WindowsService_0!1084!11/19/2014-13:46:07:: i INFO: EventPolling polling service started
dbpolling!WindowsService_0!1084!11/19/2014-13:46:07:: i INFO: NotificationPolling polling service started
dbpolling!WindowsService_0!1084!11/19/2014-13:46:07:: i INFO: SchedulePolling polling service started
dbpolling!WindowsService_0!1084!11/19/2014-13:46:07:: i INFO: UpgradePolling polling service started
dbpolling!WindowsService_0!1094!11/19/2014-13:46:07:: i INFO: PollingMaintenance: Polling started
resourceutilities!WindowsService_0!1094!11/19/2014-13:46:07:: i INFO: Maximum memory limit is 65536Mb
rpcserver!DefaultDomain!1084!11/19/2014-13:46:08:: i INFO: RPC Server started.
servicecontroller!DefaultDomain!1084!11/19/2014-13:46:08:: i INFO: RPC Server started. Endpoint name ='ReportingServices$MSRS11.SCCMINT'
appdomainmanager!WindowsService_0!1084!11/19/2014-13:46:08:: i INFO: Appdomain:2 WindowsService_0 initialized.
rshost!rshost!1084!11/19/2014-13:46:09:: i INFO: Registered url=http://+:80/ReportServer_SCCM/, vdir=/ReportServer_SCCM, pdir=C:\Program Files\Microsoft SQL Server\MSRS11.SCCMINT\Reporting Services\ReportServer.
rshost!rshost!1084!11/19/2014-13:46:09:: i INFO: Currently registered url
http://+:80/ReportServer_SCCM/ on endpoint 2
rshost!rshost!1084!11/19/2014-13:46:09:: e ERROR: Failed to register url=http://+:80/ReportServer_SCCM/ for endpoint 3, error=b7.
rshost!rshost!1084!11/19/2014-13:46:09:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/ReportServer_SCCM, pdir=C:\Program Files\Microsoft SQL Server\MSRS11.SCCMINT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!119c!11/19/2014-13:46:09:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
   at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
   at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!1084!11/19/2014-13:46:09:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_SCCM/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS11.SCCMINT\Reporting Services\ReportServer\ReportBuilder.
resourceutilities!DefaultDomain!119c!11/19/2014-13:46:09:: i INFO: Maximum memory limit is 65536Mb
rshost!rshost!119c!11/19/2014-13:46:09:: i INFO: Derived memory configuration based on physical memory as 33553912 KB
servicecontroller!DefaultDomain!bb8!11/19/2014-13:46:09:: i INFO: Total Physical memory: 34359205888
rpcserver!DefaultDomain!1084!11/19/2014-13:46:09:: i INFO: Process monitoring started.
library!WindowsService_0!1094!11/19/2014-13:46:58:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException: , An error occurred within the report server database. This may be due to a connection failure, timeout
or low disk condition within the database.;
dbpolling!WindowsService_0!1094!11/19/2014-13:46:58:: e ERROR: PollingFunction: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException: An error occurred within the report server database. This may be due to a connection failure,
timeout or low disk condition within the database. ---> System.Data.SqlClient.SqlException: A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the
remote host.).
library!WindowsService_0!1094!11/19/2014-13:47:12:: i INFO: PollingMaintenance: Polling cycle completed.
appdomainmanager!DefaultDomain!620!11/19/2014-13:47:55:: i INFO: Appdomain:3 ReportServer_SCCMINT_0-1-130608496751271532 started.
appdomainmanager!ReportServer_0-1!620!11/19/2014-13:47:57:: i INFO: RS authentication mode is 4; effective ASP.NET authentication mode is Windows. vdir=/ReportServer_SCCM.
appdomainmanager!DefaultDomain!620!11/19/2014-13:47:57:: i INFO: Appdomain:3 ReportServer_SCCMINT_0-1-130608496751271532 initialized (#1).
webserver!ReportServer_0-1!620!11/19/2014-13:48:07:: i INFO: Reporting Web Server started
library!ReportServer_0-1!620!11/19/2014-13:48:07:: i INFO: SQLDump flags: ReferencedMemory, AllThreads, SendToWatson
library!ReportServer_0-1!620!11/19/2014-13:48:07:: i INFO: MiniDump flags: DataSegs, UnloadedModules, ProcessThreadData
library!ReportServer_0-1!620!11/19/2014-13:48:07:: i INFO: Dump on: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException
library!ReportServer_0-1!620!11/19/2014-13:48:07:: i INFO: Do not dump on: System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException,Microsoft.ReportingServices.WmiProvider.WMIProviderException
library!ReportServer_0-1!620!11/19/2014-13:48:07:: i INFO: Minidump location: C:\Program Files\Microsoft SQL Server\MSRS11.SCCMINT\Reporting Services\Logfiles
resourceutilities!ReportServer_0-1!620!11/19/2014-13:48:07:: i INFO: Reporting Services starting SKU: Standard
ui!ReportServer_0-1!620!11/19/2014-13:48:07:: i INFO: Registering with Software Usage Metrics Product:SQL Server 2012, Role:Microsoft SQL Server Reporting Services, RoleGuid:8cc0ac85-40f7-4886-9dab-021519800418
resourceutilities!ReportServer_0-1!620!11/19/2014-13:48:07:: i INFO: Maximum memory limit is 65536Mb
library!ReportServer_0-1!620!11/19/2014-13:48:07:: i INFO: Call to GetItemTypeAction(/).
library!ReportServer_0-1!620!11/19/2014-13:48:08:: i INFO: Catalog SQL Server Edition = Standard
crypto!ReportServer_0-1!620!11/19/2014-13:48:08:: i INFO: Initializing crypto as user: NT SERVICE\ReportServer$SCCMINT
crypto!ReportServer_0-1!620!11/19/2014-13:48:08:: i INFO: Exporting public key
crypto!ReportServer_0-1!620!11/19/2014-13:48:08:: i INFO: Performing sku validation
crypto!ReportServer_0-1!620!11/19/2014-13:48:08:: i INFO: Importing existing encryption key
library!ReportServer_0-1!620!11/19/2014-13:48:08:: i INFO: Call to ListParentsAction(/).
library!ReportServer_0-1!620!11/19/2014-13:48:08:: i INFO: Call to ListChildrenAction(/, False).
webserver!ReportServer_0-1!620!11/19/2014-13:48:08:: i INFO: Processed folder '/'
library!DefaultDomain!120c!11/19/2014-13:50:39:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: SELECT SERVERPROPERTY failed to execute., Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ---> System.Data.SqlClient.SqlException: A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly
closed by the remote host.)
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParserStateObject.WriteSni()
   at System.Data.SqlClient.TdsParserStateObject.ExecuteFlush()
   at System.Data.SqlClient.TdsParser.TdsExecuteSQLBatch(String text, Int32 timeout, SqlNotificationRequest notificationRequest, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteScalar()
   at Microsoft.ReportingServices.Diagnostics.SkuUtil.GetSqlSku(SqlConnection sqlConn)
   at Microsoft.ReportingServices.Diagnostics.Sku.EnsureCorrectEdition(SqlConnection sqlConn, String connectionString, Boolean checkRestrictedSkus)
   --- End of inner exception stack trace ---;

Central Services instance Missing

Hi,
We are installing XI 3.0
We have applied till the Kernel Patch successfully. After that...
The SAP_<SID>_01 service is not starting. As a result of which we could not find the Central services instance in the MMC.
What could be the reason for it?
Ayone who has faced the same do let me know as to how to solve it.
thanks
Siva

Hi Siva,
First of all this situation is not only because of kernel upgrade.
I have not even applied kerenel patches. I have resterted the server machine, when my VA and IR and RWB got hang. After logging into SAPMMC i see only SAP<sid>_00 service is running . After that when i restarted my machine again and installed my sap frontend freshly, then the same service is running perfectly.
I can understand you must be going through different scanerio, but i just thought of sharing my exp. to you.
May be of some help.
regards,
kailashj

Multiple OC4J instances missing in the Enterprise Manager for a cluster

We have a cluster of 4 OAS instances installed on two Solaris 10 servers. When I login to the Oracle Enterprise Manager, I see only the Administration OC4J Instance. We had this issue earlier but it resolved by itself but this time the issue has been there for quite few days now. Need some help.
Thanks.

As I told you, this is a normal behavior, so there is no workarround, because it has to work fine later, but if you dont see any change tell me...
How did you configure your Cluster?
in a command line window, run the following in any of the node of your cluster
opmnctl @cluster status
it have to list all your components, this has to work on any of the nodes.
Also in the opmn.xml check the tags for <topology> in the firsts lines, if you dont have this in the secondary nodes then the cluster may not be working.
Regards

SQL Server 2012 Reporting Server Default USER group instance missing

Hi
We have installed SQL Server Reporting Services 2012 on Windows 2012 Server and we can’t see any SSRS default group on windows server group list say something like (SQLServerReportServerUser$TestServer$MSRS11_50.MSSQLSERVER)
created as part of the installation
we are migrating SQL Server 2008 R2 to SQL Server 2012, we were able to see default group for Reporting Server has been created in the earlier versions like SQLServerReportServerUser$TestServer$MSRS10_50.MSSQLSERVER
Can you please assist whether we are missing anything in the SQL Server 2012 installation, this needs to be fixed as part of Report server user authentication
Thanks,
Harish

Hello,
You can use roles:
http://msdn.microsoft.com/en-us/library/ms156406.aspx
http://msdn.microsoft.com/en-us/library/ms159820(v=sql.110).aspx
http://msdn.microsoft.com/en-us/library/ms156014.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SAP Management console SID missing

Hi,
After restart the operating system, SAP SID is missing in SAP Management console.
Below are the details and steps I tried,
1. Starting the SAP System from the command line u2013 I got the following
message u201CSTARTSAP Continues u2026u201D
2. Oracle is up and running (Can able to start and stop oracle )
3. R3trans -d return code is "000"
4. Installed latest SAP Managent console from "SAP MMC 7.20 -> Windows Server on IA32 32bit"
6. Downloaded and install "NTSCMGR" from "Note 618053 - Download Location for NTSCMGR.EXE".
7. I have checked these note:: 82751 and 0000142100.
When i try adding servie using sapstartsrv.exe -t under /usr/sap/<SID>/SYS/exe/uc/NT1386 am getting the below message
"Cannot install service
Create Service failed:421
The acount name is invalid or does not exist, or the password is invalid for the account name specified"
Please advice on below points,
1. How to add a SAP service in services.msc (SAP<SID>_<NR>)
2. What I have to do bring back the instance in the SAPMMC and continue with my old configuration
System Environment :: This is 32bit IDES server (ECC 6.0 / Oracle 10g) sits in windows server 2k3 service pack 2
Thanks, Ganesh

Hi Orkun,
Please see th output below
E:\WINDOWS\system32>netstat -a
Active Connections
Proto Local Address Foreign Address State
TCP saptest:1031 saptest:1032 ESTABLISHED
TCP saptest:1032 saptest:1031 ESTABLISHED
TCP saptest:1424 saptest:1425 ESTABLISHED
TCP saptest:1425 saptest:1424 ESTABLISHED
TCP saptest:1426 saptest:5939 ESTABLISHED
TCP saptest:5939 saptest:1426 ESTABLISHED
E:\WINDOWS\system32>netstat -a -o
Active Connections
Proto Local Address Foreign Address State PID
TCP saptest:http saptest:0 LISTENING 1420
TCP saptest:epmap saptest:0 LISTENING 680
TCP saptest:https saptest:0 LISTENING 1420
TCP saptest:microsoft-ds saptest:0 LISTENING 4
TCP saptest:1025 saptest:0 LISTENING 432
TCP saptest:1527 saptest:0 LISTENING 1228
TCP saptest:5938 saptest:0 LISTENING 1420
TCP saptest:50113 saptest:0 LISTENING 3036
TCP saptest:netbios-ssn saptest:0 LISTENING 4
TCP saptest:1026 saptest:0 LISTENING 1228
TCP saptest:1031 saptest:1032 ESTABLISHED 1420
TCP saptest:1032 saptest:1031 ESTABLISHED 1420
TCP saptest:1424 saptest:1425 ESTABLISHED 2804
TCP saptest:1425 saptest:1424 ESTABLISHED 2804
TCP saptest:1426 saptest:5939 ESTABLISHED 2804
TCP saptest:5939 saptest:0 LISTENING 1420
TCP saptest:5939 saptest:1426 ESTABLISHED 1420
UDP saptest:microsoft-ds : 4
UDP saptest:isakmp : 432
UDP saptest:ipsec-msft : 432
UDP saptest:ntp : 792
UDP saptest:netbios-ns : 4
UDP saptest:netbios-dgm : 4
UDP saptest:ntp : 792
UDP saptest:1030 : 792
Thanks

Audio missing from saved project

Hi All...
New user here, first-time "test movie" combines video with ambient audio, stills and a music track. Based on Mr. Hunt's article, here's the background information:
Dell Precision T1500 / Windows 7 Professional 64-bit OS, no pen or touch input
Processor: Inter Core i7CPU 870 @ 2.93 GHz
Installed memory: 8 GB
Single hard drive: 930 gb SATA file system, NTFS, compression unchecked / no RAID
"D" drive is HL-DT-ST- DVD+-RW GH50N DVD burner
"E" drive is HL-DT-ST BD-RE BH30N CD ROM drive
No external drives
Virtual memory: 8151 mb dynamically controlled by windows
Video Card: NVDIA QUADRO FX 580 / pci BUS 1 / driver no. 8.17.12.5896, driver date 7-9-2010
Audio System: Realtek high definition audio, 2-channel 16-bit 48000Hz / driver version 6.0.1.5919 / driver date: 8-18-09
Using PE 8.0.1, updated July 14
Project settings: Editing Mode: HD 1080i, timebase 29.97 fps, frame size 1920 x 1080, 16:9 / pixel aspect ratio: square pixels (1.0) / Fields: No Fields (progressive scan) / Display Format 30fps drop-frame timecode / title safe area 20 % / action safe area 10 % audio sample rate: 48000 Hz
Video clips: MPEG movies, image size 1440 x 1080, pixel depth: 32, frame rate 29.97. Average data rate 630-650 KB/second (there are a couple dozen clips, I didn't check them all...)
Source audio format: 48,000 Hz Compresses stereo; project audio format 48,000 Hz 32-bit floating point stereo
Music track: MP3 source audio format: 44,100Hz compressed stereo; project audio format 44,100 Hz 32-bit floating point stereo; average data rate 23KB/sec
Still images: all JPEGs, some 1280 x 960, some 2048 x 1636, pixel depth 32, pixel aspect ratio 1.0.
Other app's typically running: IE and/or Firefox, perhaps MS word and/or Publisher, Mozilla's Thunderbird. However, I've "saved" this project with *no other apps* running, and there's still no audio.
Hope all this suggests a solution...
Thanks for your help, all...
T

Thanks for all this information, T.
So why are you editing a 1440x1080 video in a 1920x1080 project? If this is AVCHD footage, it's very important to use the right project settings.
That has no effect on your audio, of course. But it could affect your video quality when you output your file.
That say, can you explain what you mean by "Audio missing from save project"?
Do you mean that you don't hear the audio in Premiere Elements -- or that you don't hear it when you output, say, an MOV or WMV file?
What file format are you exporting and what are you playing soundless this file on?
And, finally, is there no audio whatsoever, or is only some audio (music, for instance) missing from your output?

SAPMMC tree disappear

Dear Expert,
My SAPMMC suddenly disappeared after restarting the server, i have tried to recover it by:
- adding snap-in, but it showed error when activating:
CAN NOT CONNECT TO SAP SERVICE on PORTAL01
WebService errror: 20
Unknown error
DCOM Interface error: 80070424
The specified service does not exist as an installed service.
- try to run startsap manually from command line (did not work), with command:
startsap.exe name=SLM nr=00 SAPDIAHOST=<host name> profile=d:/usr/sap/SLM/SYS/profile/START_DVEBMGS00_hostname
My questions:
1. How to recover SAPMMC without re-installing CI?
2. Proper command to startsap manually from command line.
3. What's the root cause for such problem? How to avoid this in the future?
Since this is solman system that urgently required, your assistance and advice are greatly appreciated.
Thanks in advance,
Rudi

Dear Debasis,
Greetings!
I am facing a similar situation.
I had an EP 6 system installed only with the JAVA instance on Windows 2003 server with MS SQL. I had the installation and configuration successful.
I wanted to install SAPGUI in the server for accessing my R3 systems. After installing the SAPGUI, I had to restart the portal server. After this I am not able to find the SAP instance of the Portal system in the SAPMMC.
I tried all the suggestions mentioned by you in the above forum helping Rudi.
1. Starting the SAPSERVICES - SAP<SID>_00 & SAP<SID>_01
2. Changing the logon of the services after changing the logon userID from SAPService<SID> to <SID>ADM
3. Checking the Path to Executable for both the services.
4. Checking the share sapmnt and saploc and the access permissions for the same.
5. Starting the SAP System from the command line.
6. Starting the sapstartsrv.exe from the SAP Executables.
In the last try I got an error message mentioning that the DYNAMIC LINK LIBRARY LIBRFC32U.DLL COULD NOT BE LOADED.
When I searched for the dll file in the server, I found the same in the SAPGUI Installation CD Dump and no-where else.
Could the Installation of SAPGUI 7.10 in the server cause any user permission problems or file permission changes? I remember a message that appeared when I was installing the SAPGUI, it is mentioned below,
+Please switch your Terminal Server to install mode before running SAPsetup. You can do this using the commandline "change user /install" and reset to execute mode using "change user /execute" after installation.
Do you want to correct your server mode now?+
Please advice on the same. Could this cause any changes to the library file and pull down my server when it was restarted?
What should I do now to get back the instance in the SAPMMC.
Expecting your reply at the earliest.
Thank you
Regards,
Vineeth

BPM: System_Error" SOAP fault message received

Hi,
We upgraded SAP system from 4.7 to ERP2004 on 09/17/05.
We have XI-3.0 version from last 9 months and this BPM was working good so far. We have not changed anything in it except we upgraded the SAP system.
We are using ABAP proxy from SAP to send "userid"
message to XI-BPM and then it would make a Synchonous call to SAP system to get roles of those "usrid".
In the first step when it is sending data to XI an exception is raised and in the second step when it tries to make synchronous call to SAP we are getting error:
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="System_Error">SOAP fault message received</Trac
<Trace level="3" type="System_Error">SOAP fault code: Client</Trace>
<Trace level="3" type="System_Error">SOAP fault string: Error during c
I noticed that the XML name tag looks different now
Before upgrade when message was successful.
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:MT_ECA_USRID xmlns:ns1="http://bcm.edu/common"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<USRID>CLARKSON</USRID>
<USRID>2_MA140016</USRID>
</ns1:MT_ECA_USRID>
After upgrade when message is failed
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:MT_ECA_USRID xmlns:nr1="http://bcm.edu/common">
<USRID>AABULIMI</USRID>
<USRID>AB147899</USRID>
<USRID>ACHALL</USRID>
</nr1:MT_ECA_USRID>
You would notice that
" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
missing after upgrade.
I would appreciate if anyone could help me.
Mrudula

Hi,
Can you paste the full error message. Also take a look at the default trace log in Visual Admin. Set the logging for soap to debug.
Naveen

EP installation SAPINST HANGS

System details: windows 2003, jdk 1.4.2_10, sql 2000, ecc 5.0 unicode
sequence of installation: abap (central and database instance) java add-in,upgrade java instance to sp16
Current: installation of EP
Problem 1: On screen of Portal platform for sap java system it shows J2EE Engine: DEV DBTYPE UNDEFINED
Problem: Sapinst hangs on deploy jdbc libraries
For problem i read that from netweaver sr01 portal can be installed on abap+java system, as java add-in is seperately installed on another schema.
For problem 2 java.exe.log is shown below:
java.lang.NoClassDefFoundError: iaik/utils/Base64Exception
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:108)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
 at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
 at com.sap.engine.configtool.batch.BatchConfig.go(BatchConfig.java:47)
 at com.sap.engine.configtool.batch.BatchConfig.main(BatchConfig.java:83)
I downloaded sap crypto.. lib, sda file and try to deploy it via sdm but when i execute remotegui.bat, after entering the default password 'sdm' it give the error
ERROR: Could not establish connection to server SAPDevSrv at port 50018: Connection refused: connect
Further to add,i find scs(java instance running)in sapmmc, but there is no entry for java.exe in task manager, i use jcontro.exe pf=<..> file
can anyone help me.
thanks
Imran

the problem is solved a little bit, the sapinst moved few phases ahead.
what i did was that i started deploying sda file via sdm command mode and i started the sdm server from command mode.
But now there is another error of compilation. the callSdmviaSAPinst.log
Apr 18, 2006 5:22:51 PM Info: Start logging to console
Apr 18, 2006 5:22:51 PM Info:
Apr 18, 2006 5:22:51 PM Info: ============================================
Apr 18, 2006 5:22:51 PM Info: = Starting to execute command 'deploy' =
Apr 18, 2006 5:22:51 PM Info: ============================================
Apr 18, 2006 5:22:51 PM Info: Starting SDM - Software Deployment Manager...
Apr 18, 2006 5:22:51 PM Info: tc/SL/SDM/SDM/sap.com/SAP AG/6.4016.00.0000.20060119123612.0000
Apr 18, 2006 5:22:52 PM Info: SDM operation mode successfully set to: Standalone
Apr 18, 2006 5:22:52 PM Info: Initializing Network Manager (50017)
Apr 18, 2006 5:22:52 PM Info: Checking if another SDM is running on port 50018
Apr 18, 2006 5:22:52 PM Info: -
Starting deployment -
Apr 18, 2006 5:22:52 PM Info: Error handling strategy: OnErrorStop
Apr 18, 2006 5:22:52 PM Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop
Apr 18, 2006 5:22:52 PM Info: Update strategy: UpdateAllVersions
Apr 18, 2006 5:22:52 PM Info: Starting deployment prerequisites:
Apr 18, 2006 5:22:52 PM Info: Loading selected archives...
Apr 18, 2006 5:22:52 PM Info: Loading archive 'Z:\SAPCDs\G3\51030723\EP-KMC\DQE\SDA\J2EE\com.sapportals.dqe.beans.ear'
Apr 18, 2006 5:22:55 PM Info: Selected archives successfully loaded.
Apr 18, 2006 5:22:55 PM Info: Actions per selected component:
Apr 18, 2006 5:22:55 PM Info: Initial deployment: Selected development component 'com.sapportals.dqe.beans'/'sap.com'/'SAP AG'/'609.20041012204607.0000' will be deployed.
Apr 18, 2006 5:22:55 PM Info: Ending deployment prerequisites. All items are correct.
Apr 18, 2006 5:22:55 PM Info: Saved current Engine state.
Apr 18, 2006 5:22:55 PM Info: Starting: Initial deployment: Selected development component 'com.sapportals.dqe.beans'/'sap.com'/'SAP AG'/'609.20041012204607.0000' will be deployed.
Apr 18, 2006 5:22:55 PM Info: SDA to be deployed: E:\usr\sap\DEV\DVEBMGS00\SDM\root\origin\sap.com\com.sapportals.dqe.beans\SAP AG\609.20041012204607.0000\com.sapportals.dqe.beans.ear
Apr 18, 2006 5:22:55 PM Info: Software type of SDA: J2EE
Apr 18, 2006 5:22:55 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Apr 18, 2006 5:22:58 PM Info: Begin of log messages of the target system:
06/04/18 17:22:56 - ***********************************************************
06/04/18 17:22:57 - Start updating EAR file...
06/04/18 17:22:57 - start-up mode is lazy
06/04/18 17:22:57 - EAR file updated successfully for 156ms.
06/04/18 17:22:57 - Start deploying ...
06/04/18 17:22:57 - EAR file uploaded to server for 63ms.
06/04/18 17:22:58 - ERROR: Not deployed. Deploy Service returned ERROR:
 java.rmi.RemoteException: Cannot deploy application sap.com/com.sapportals.dqe.beans..
 Reason: Errors while compiling:
 Compilation process error : CreateProcess: null\bin\javac -J-Xmx256m @E:/usr/sap/DEV/DVEBMGS00/j2ee/cluster/server0/compilerTempDir/compiler_Apr_18_at_17.22/O1145373778846.txt @E:/usr/sap/DEV/DVEBMGS00/j2ee/cluster/server0/compilerTempDir/compiler_Apr_18_at_17.22/S1145373778846.txt error=2; nested exception is:
 com.sap.engine.services.ejb.exceptions.deployment.EJBFileGenerationException: Errors while compiling:
 Compilation process error : CreateProcess: null\bin\javac -J-Xmx256m @E:/usr/sap/DEV/DVEBMGS00/j2ee/cluster/server0/compilerTempDir/compiler_Apr_18_at_17.22/O1145373778846.txt @E:/usr/sap/DEV/DVEBMGS00/j2ee/cluster/server0/compilerTempDir/compiler_Apr_18_at_17.22/S1145373778846.txt error=2
 at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:554)
 at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
 Caused by: com.sap.engine.services.ejb.exceptions.deployment.EJBFileGenerationException: Errors while compiling:
 Compilation process error : CreateProcess: null\bin\javac -J-Xmx256m @E:/usr/sap/DEV/DVEBMGS00/j2ee/cluster/server0/compilerTempDir/compiler_Apr_18_at_17.22/O1145373778846.txt @E:/usr/sap/DEV/DVEBMGS00/j2ee/cluster/server0/compilerTempDir/compiler_Apr_18_at_17.22/S1145373778846.txt error=2
 at com.sap.engine.services.ejb.util.AdminUtils.compile(AdminUtils.java:473)
 at com.sap.engine.services.ejb.deploy.DeployAdmin.deploySingleJar(DeployAdmin.java:628)
 at com.sap.engine.services.ejb.deploy.DeployAdmin.generate(DeployAdmin.java:264)
 at com.sap.engine.services.ejb.EJBAdmin.deploy(EJBAdmin.java:2144)
 at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
 at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:319)
 at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3139)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:539)
 ... 10 more
 Caused by: com.sap.engine.compilation.CompilerProcessFailureException: Compilation process error : CreateProcess: null\bin\javac -J-Xmx256m @E:/usr/sap/DEV/DVEBMGS00/j2ee/cluster/server0/compilerTempDir/compiler_Apr_18_at_17.22/O1145373778846.txt @E:/usr/sap/DEV/DVEBMGS00/j2ee/cluster/server0/compilerTempDir/compiler_Apr_18_at_17.22/S1145373778846.txt error=2
 at com.sap.engine.compilation.ExternalCompiler.compile(ExternalCompiler.java:77)
 at com.sap.engine.services.ejb.util.AdminUtils.compile(AdminUtils.java:471)
 ... 20 more
 For detailed information see the log file of the Deploy Service.
06/04/18 17:22:58 - ***********************************************************
Apr 18, 2006 5:22:59 PM Info: End of log messages of the target system.
Apr 18, 2006 5:22:59 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Apr 18, 2006 5:22:59 PM Error: Aborted: development component 'com.sapportals.dqe.beans'/'sap.com'/'SAP AG'/'609.20041012204607.0000':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/com.sapportals.dqe.beans..
Reason: Errors while compiling:
Compilation process error : CreateProcess: null\bin\javac -J-Xmx256m @E:/usr/sap/DEV/DVEBMGS00/j2ee/cluster/server0/compilerTempDir/compiler_Apr_18_at_17.22/O1145373778846.txt @E:/usr/sap/DEV/DVEBMGS00/j2ee/cluster/server0/compilerTempDir/compiler_Apr_18_at_17.22/S1145373778846.txt error=2; nested exception is:
 com.sap.engine.services.ejb.exceptions.deployment.EJBFileGenerationException: Errors while compiling:
Compilation process error : CreateProcess: null\bin\javac -J-Xmx256m @E:/usr/sap/DEV/DVEBMGS00/j2ee/cluster/server0/compilerTempDir/compiler_Apr_18_at_17.22/O1145373778846.txt @E:/usr/sap/DEV/DVEBMGS00/j2ee/cluster/server0/compilerTempDir/compiler_Apr_18_at_17.22/S1145373778846.txt error=2
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Apr 18, 2006 5:22:59 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Apr 18, 2006 5:22:59 PM Error: -
At least one of the Deployments failed -
Apr 18, 2006 5:22:59 PM Info: Summarizing the deployment results:
Apr 18, 2006 5:22:59 PM Error: Aborted: Z:\SAPCDs\G3\51030723\EP-KMC\DQE\SDA\J2EE\com.sapportals.dqe.beans.ear
Apr 18, 2006 5:22:59 PM Error: Processing error. Return code: 4
But as you suggested if i change my java version would it not be a problem for sap other instances? if not then i can change. and also if i change the java version should i have to repeat ep installation or the aborted installation will work?
thanks
Imran

Issue with Close/Minimise/Zoom Buttons in Snow Leopard

Dear All,
Hope you may be able to help me with a small but really annoying problem.
If I go to click on the "close" button on a window (can be any application) but, for instance, miss slightly and click on the grey area just below or to the side of it, and then click close, the window in fact minimises.
This is a reproducible behaviour but I can't for the life of me figure out why it's happening! I've repaired permissions and so on but to no avail.
The only thing I can think was that I upgraded my copy of Snow from a Snow beta rather than an erase and install - would this cause such behaviour?
Thanks
Ryan

That indicates corruption or a conflict within the old account, usually with preference (plist) files. Make a list of the preference files inside the /new user/Library/Preferences/ folder, log back into the old account, move the ones on your list to a folder on the desktop, log out and back in, and see if the behavior is fixed. If so, create another folder on the Desktop, copy the new ones to that folder, and slowly replace a few new ones in /old user/Library/Preferences/ with the same ones first moved, until you find which ones were causing the problem. Delete those and replace with their copies. The process is slow, but required.
Alternatively, you could log into the new one, delete the old one, *electing to save its data (creates a disk image in /Users/Deleted Users/)*, recreate the account, using the same username/password combo, log into it, mount the saved data image, and slowly transfer plist files from it to the recreated one, frequently logging out and back in until you find the bad files.
Good luck.

INSTANCE MISSING IN SAPMMC

Similar Messages

Maybe you are looking for