Instance not coming up during starting perticularly dispatcher too...???

Hi Gurus,
               My sap instance going down & it is showing yellow color at SAP management console and some time times dispatcher not starting and its status color is brown color. I heard that at WORK directory we can find the solution... If so, how to find solution and how to bring the system up........?
Thanks in Advance...!!!!!!!!
Regads,
BBR.

Yes you need to check the logs in the work directory.(/usr/sap/SID/DV*/work)
Please check the logs with starting DEV_.........
If you have java system then you can check the logs std_server.out,std_dispatcher.out. in the same work directory.
Did you do kernel upgrade or updated the profile parameters thet can be also the reason of system not comming up .Please ckeck the logs and you shall come to know.
thanks
Rishi Abrol

Similar Messages

  • Managed Server is Not coming UP from STARTING state

    Managed Server is Not coming UP from STARTING state

    Hi,
    Please try the following options:
    1) Apply -D_Offline_FileDataArchive=true
    The WebLogic Diagnostics Framework creates the diagnostic store (DAT) file which is used for different purposes. The initial size of the store file is about 1M.
    Here are the details of the parameter suggested: -D_Offline_FileDataArchive=true
    The above parameter is a (undocumented and unsupported) system property that disables WLDF indexing on the log file.
    Engineering has delivered an undocumented system property to disable the file archive indexing task (-D_Offline_FileDataArchive=true),
    This property will disable incremental as well as full indexing of WLDF archiving, if property is not properly applied, you can see a File Indexer timer kicks in for every 30 seconds.
    2) WLW page-flow event reporter may be creating several entries in the diagnostics store
    apply -Dcom.bea.wlw.netui.disableInstrumentation=true
    3) Disable JDBC profiling. (Under JDBC/datasource_name/diagnostics uncheck all the options there)
    If JDBC profiling is turned on, it inserts profiling data into the diagnostic store, which can cause it to grow.
    4) Disable Harvesting (change the value for Profile Harvest Frequency Seconds to zero)
    5) try setting the "synchronous-write-policy" parameter in the server configuration to "Cache-Flush". This bypasses the "direct I/O" code in the file store.
    Servers--->Configuration--->Services--->Default Store you can set the synchronous-write-policy to Cache-Flush
    Synchronous Write Policy:
    The disk write policy that determines how the file store writes data to disk.
    This policy also affects the JMS file store's performance, scalability, and reliability. The valid policy options are:
    * Direct-Write
    File store writes are written directly to disk. This policy is supported on Solaris, HP-UX, and Windows. On Windows systems, this option generally performs faster than the Cache-Flush option writes.
    * Disabled
    Transactions are complete as soon as their writes are cached in memory, instead of waiting for the writes to successfully reach the disk. This policy is the fastest, but the least reliable (that is, transactionally safe). It can be more than 100 times faster than the other policies, but power outages or operating system failures can cause lost and/or duplicate messages.
    * Cache-Flush
          Transactions cannot complete until all of their writes have been flushed down to disk. This policy is reliable and scales well as the number of simultaneous users increases.
    HTH
    Regards
    RC2
    http://crkthoughts.blogspot.com

  • Shadow instance not coming up on START_SHDI_FIRST

    Hi Gurus,
    EPH1 SP 5 upgrade on NW 7.0 Usage type -BI system.  Shadow instance isn't coming up. 
    dev_ms erors with:
    [Thr  1] *** ERROR => MsSClientHandle: no server provides service ENQ  (4), requ
    ested from deville_BL1_01 [msxxserv_mt. 4720]
    dev_disp errors that all work processes are dying
    dev_w* errors with:
    M  ThInit: running on host deville
    M  calling db_connect ...
    B
    B Sat Dec 18 23:05:25 2010
    B  create_con (con_name=R/3)
    B  Loading DB library '/usr/sap/BL1/EHPI/abap/exe/dboraslib.so' ...
    B  Library '/usr/sap/BL1/EHPI/abap/exe/dboraslib.so' loaded
    B  Version of '/usr/sap/BL1/EHPI/abap/exe/dboraslib.so' is "700.08", patchlevel
    (0.42)
    B  New connection 0 created
    C  Oracle Client Version: '10.2.0.2.0'
    C  application info callback registered
    B  ***LOG BY2=> sql error -1     performing CON [dbsh#2 @ 1208] [dbsh    1208 ]
    B  ***LOG BY0=> OCI returned error code -1. [dbsh#2 @ 1208] [dbsh    1208 ]
    B  ***LOG BY2=> sql error -1     performing CON [dblink#4 @ 433] [dblink  0433 ]
    B  ***LOG BY0=> OCI returned error code -1. [dblink#4 @ 433] [dblink  0433 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1462]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thx
    xhead.c   10589]
    I can't figure out why the work processes can't connect to the DB.  I verify that the R3trans -d is working kernel exe, in both the exe and exenew of the upgrade shadow instance.  Any ideas?
    Thx,
    Bob

    dev_disp continued (don't know why it doesn't carry carriage returns in this horrible editor)
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    1
    1
    2000
    1
    0
    --------++++--
    +
    DIA
    0
    0
    2000
    0
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id               2
    wake_evt_udp_now        1
    wake events             total     1,  udp     1 (100%),  shm     0 (  0%)
    since last update       total     1,  udp     1 (100%),  shm     0 (  0%)
    Dump of tm_adm structure:                       Wed Dec 22 17:54:56 2010
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks                   Wed Dec 22 17:54:56 2010
    =============================
    Slots: 300, Used: 0, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=12
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Dec 22 09:55:01 2010
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >deville_BL1_01                          < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_OFF
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect( key 57 valid )
    ShmProtect( slot Index 56 )
    ShmProtect( Mode: 0 )
    ShmProtect( before shmdt )
    ShmProtect( after shmdt )
    ShmProtect( before shmat )
    ShmKeySharedMMU( 57 ) = 0 (octal)
    ShmProtect( after shmat )
    ShmProtect: shmat key 57 prot 3/0 done
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect( key 57 valid )
    ShmProtect( slot Index 56 )
    ShmProtect( Mode: 0 )
    ShmProtect( before shmdt )
    ShmProtect( after shmdt )
    ShmProtect( before shmat )
    ShmKeySharedMMU( 57 ) = 0 (octal)
    ShmProtect( after shmat )
    ShmProtect: shmat key 57 prot 1/4096 done
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing proc (7407) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    kill(7407,0) successful -> process alive
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=12
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Dec 22 09:55:02 2010
    NiISelect: TIMEOUT occured (1000ms)
    kill(7407,0) -> ESRCH: process died
    DpStartStopMsg: send stop message (myname is >deville_BL1_01                          <)
    DpStartStopMsg: Write AD_STARTSTOP message with type=  0, name=deville_BL1_01      , sapsysnr= 1, hostname=deville                                             
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
    MsIBufAlloc: allocated buffer
    NiIRead: hdl 2 received data (rcd=458,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=458
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 458 bytes
    MSG received, len 110+348, flag 4, from deville_BL1_01      , typ 0, key FFFFFFFF00000000
    DpHalt: received 348 bytes from message server
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    DpHalt: received 4 bytes from message server
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    DpHalt: received 4 bytes from message server
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    DpHalt: received 4 bytes from message server
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    DpHalt: received 4 bytes from message server
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    DpHalt: received 4 bytes from message server
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    DpHalt: received 4 bytes from message server
    NiIRead: hdl 2 received data (rcd=214,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=214
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 214 bytes
    MSG received, len 110+104, flag 3, from MSG_SERVER          , typ 0, key -
    DpHalt: received 104 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Wed Dec 22 09:55:03 2010
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12906]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelPSet: set events of sock 11 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelPRemove: removed last sock 11 (pos=3)
    NiSelIRemove: removed hdl 2
    NiICloseHandle: shutdown and close hdl 2 / sock 11
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ShmCreate( 76, 0, 2, 0x0x106329f40 )
    ShmKeyPermission( 76 ) = 0740 (octal)
    ShmDelete( 13 )
    cleanup event management
    cleanup shared memory/semaphores
    ShmCleanup SHM_SYS_ADM_KEY
    ShmCleanup( 1 )
    ShmCreate( 1, 0, 2, 0x0xffffffff7fffed58 )
    ShmProtect( 1, 3 )
    ShmProtect( key 1 valid )
    ShmProtect( slot Index 0 )
    ShmProtect( Mode: 0 )
    ShmProtect( before shmdt )
    ShmProtect( after shmdt )
    ShmProtect( before shmat )
    ShmKeySharedMMU( 1 ) = 0 (octal)
    ShmProtect( after shmat )
    ShmProtect: shmat key 1 prot 3/0 done
    ShmCreate( 1, 0, 2, -> 0x0xffffffff7b700000 )
    ShmCleanup SHM_DP_ADM_KEY
    ShmCleanup( 2 )
    ShmCreate( 2, 0, 2, 0x0xffffffff7fffed58 )

  • SQL server instance not getting detected during SCOM 2012 R2 Installation

    Hi All,
    This is related to the below thread which i created. But i wanted to test this practically in a LAB equipment
    https://social.technet.microsoft.com/Forums/en-US/96feece7-c168-4f42-b62e-4c0c20f8d525/does-scom-2012-2012-r2-setup-detect-a-sql-instance-of-a-sql-server-in-the-same-network-which-is-in?forum=operationsmanagerdeployment
    So i want to install SCOM in my domain, But i want to use a SQL server in my network which is in another domain.
    So i have 4 server machines as below:
    SERVER_DC1 - Domain controller of 1st domain.
    SERVER_DC2 - Domain controller of 2nd domain.
    SERVER_SQL - SQL server 2012 Enterprise installed for SCOM but is in Domain 1
    Server_SCOM - I want to install SCOM in this but which is in domain 2
    I created a trust relation between 2 domains with a Forest trust 2 way transitive.
    I have created a security group and added that as SQL Admin during the installation. Later i added one Domain administrator account from Domain 2 to this security group.
    When i do a installation in SERVER_DC1 for testing the SQL instance is being detected as below.
    When i do the installation in Server_SCOM which is in another domain then the instance is not getting detected.
    I have turned off windows firewall in all the machines.
    Before creating the trust i ran the setup in Server_SCOM then it was giving me a warning saying it is not able to access the SQL server due to permission issues.
    After giving permissions my instance is not at all getting detected.
    Can any one help plz.
    Gautam.75801

    Hi Yan Li,
    Really a helpful post. I tested the connection. I connected to the SQL server in Domain A using a server in domain B logged in as a domain B user to whom the SQL permissions are provided. The result says It was successful.
    Below is the screenshot.
    I don't understand why is it not getting detected in the SCOM setup.
    But 1 more important thing which i forgot to mention.
    When i log on to the server in which i want to install SCOM in domain B, But by using Domain A's user account (Added as a local user in SCOM server in domain B), Then the Instance is getting detected.
    Below is a screenshot of that.
    So has any one faced such a type of issue ?
    Gautam.75801

  • Oracle Data Guard, SAP instances not coming up after switchover

    Dear Experts,
    We have implemented Dataguard, Uisng Maximum performance with real time apply (redo log apply). Redo logs are apply from primary to standby perfectly. And the SAP Instances are up and running, when we create a user in primary its reflecting in standby server.
    When i do the the switchover from primary <--> standby. There is no communication between R3 and database. I have refered the Note 400241, have not got the solution. I changed the password of the OPS$ user uisng brtools utility. Still getting the r3trans return code 0012.
    O/s-Windows 2003 server
    DB- Oracle 10g
    SAP ECC 6.0
    Regards,
    Nisar

    Hi Nisar,
    We would like to implement the data guard , the system landscapes are also similar to your site. Can u pls give me the documentation which explains step by step configuration. We are not able to activate oracle enterprise manager where the configuration is slightly simple. Is it possible to have the primary and standy database with same db_name?. Pls help to proceed further.
    Regards
    SK

  • Signature status not coming correct during silent printing. Bug?

    Am using javascript inside my plugin to get the signature status in Acrobat 9.3.  Below is the code.
    sprintf(jsScript,"var f = this.getField('%s').signatureInfo(); event.value = f.status; ",strSigField);ASBool bRet = AFExecuteThisScript (gPDDoc, jsScript, &pReturnValue);
    This is working fine, except during slient printing.  Everytime including normal print, am getting the status as '4' i.e. signed which is correct.
    However, while printing silently in Acrobat either via code or manually by Right-clicking on the pdf in Explorer and selectting Print, am getting '1' i.e. unknown status for signed signature fields.
    Have also tried executing the menu item "Advanced->Sign & Certify->Validate All Signatures" before trying to get the status but am getting the same result.
    Please let me know if anyone else has also experienced the same issue and what is the cause/resolution of the same or this is a bug in Acrobat?

    Irosenth,
    Submitted a bug report and uploaded the sample pdf at http://www.megaupload.com/?d=Z5P8STOL.
    Let me know if any further information is required.

  • Aluminum keyboard not being recognized during start-up on 2006 Mac Mini

    I have a 2006 model 1.83ghz Core Duo Mac Mini.
    I purchased an Apple Aluminum keyboard to use with the Mini.
    The keyboard works fine, in general.
    However, upon rebooting, the keyboard is not recognized for initiating commands.
    For example, holding the Option key down does not bring up the Startup manager screen,
    holding down the C key will not allow booting from an Apple Leopard DVD,
    holding down Command S will not initiate single user mode.
    The keyboard firmware update has been installed.
    I have tried different Aluminum keyboards on the computer, with the same result.
    The aluminum keyboard works at startup on a 2007 Intel iMac.
    I also have a 2007 model 2.0ghz Mac Mini,
    it does not have any problems recognizing an Aluminum keyboard at startup.
    I have had the logic board replaced under Apple Care, this did not help.
    Apple products simply should just work together.
    Daryl Woods

    This is ridiculous and unacceptable. I have the same issue with this $%*& keyboard and my iMac CD (January 2006). A Mac that is less than 3 years old should not be made less functional by a basic peripheral like a keyboard. If Apple can't or won't address this issue they should at least make the previous generation keyboard - that functioned fine - available.
    I had to replace my original keyboard and am now stuck with a less than functional, newer one... pretty unbelievable.

  • Monitor not coming on at start up

    hello, had loads of junk on pc, week off work decided to have a re-install. came down this morning and my monitor wouldn't turn on from it's sleep state no anything. i powered off the monitor and left pc on, turned monitor back on and it was fine. i just want to know could this be a driver problem? i installed the chipset drivers from my disk and grx drivers latest from msi site. this is the first time i loaded chipset drivers from disk i download to flash from site last time.
    screen is recognised by windows and has loaded the driver (v1).
    im just curious if this is a driver issue.
    thanks

    well... i was looking to upgrade! the next day wouldnt boot at all. motherboard, and graphics card sadly no more. i guess all the reboots of installing operating system killed something.
    368 days old, just out of warrenty! 

  • Error during start instance phase

    Dear all,
    I am getting an error during start instance phase of netweaver 7.0 installing.I am using windows server 2008 and mssql.
    The error is "instance ecd\dvebmgs00 reached state shutdown after having state starting.giving up".I searched a lot but still error
    is not solved.so please tell me how to solve this error.

    dev_disp:
    trc file: "dev_disp", trc level: 1, release: "701"
    sysno      00
    sid        ECD
    systemid   562 (PC with Windows NT)
    relno      7010
    patchlevel 0
    patchno    32
    intno      20020600
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        3228
    Mon Mar 17 11:04:13 2014
    kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
    length of sys_adm_ext is 576 bytes
    *** SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 3228) [dpxxdisp.c   1286]
        shared lib "dw_xml.dll" version 32 successfully loaded
        shared lib "dw_xtc.dll" version 32 successfully loaded
        shared lib "dw_stl.dll" version 32 successfully loaded
        shared lib "dw_gui.dll" version 32 successfully loaded
        shared lib "dw_mdm.dll" version 32 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Mon Mar 17 11:04:19 2014
    *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5529]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >SAPdev01_ECD_00                         <
    DpShMCreate: sizeof(wp_adm)        29792    (1752)
    DpShMCreate: sizeof(tm_adm)        5912704    (29416)
    DpShMCreate: sizeof(wp_ca_adm)        24064    (80)
    DpShMCreate: sizeof(appc_ca_adm)    8000    (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)        552080    (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)        0    (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)        0    (72)
    DpShMCreate: sizeof(vmc_adm)        0    (1864)
    DpShMCreate: sizeof(wall_adm)        (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)    48
    DpShMCreate: SHM_DP_ADM_KEY        (addr: 0000000008DC0050, size: 6614144)
    DpShMCreate: allocated sys_adm at 0000000008DC0050
    DpShMCreate: allocated wp_adm at 0000000008DC2270
    DpShMCreate: allocated tm_adm_list at 0000000008DC96D0
    DpShMCreate: allocated tm_adm at 0000000008DC9730
    DpShMCreate: allocated wp_ca_adm at 000000000936CFB0
    DpShMCreate: allocated appc_ca_adm at 0000000009372DB0
    DpShMCreate: allocated comm_adm at 0000000009374CF0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 00000000093FB980
    DpShMCreate: allocated gw_adm at 00000000093FBA00
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 00000000093FBA30
    DpShMCreate: allocated wall_adm at 00000000093FBA40
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    rdisp/queue_size_check_value :  -> off
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 1018 blocks reserved for free list.
    ES initialized.
    Mon Mar 17 11:04:20 2014
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1681]
    ***LOG Q0K=> DpMsAttach, mscon ( SAPdev01) [dpxxdisp.c   12483]
    Mon Mar 17 11:04:21 2014
    DpStartStopMsg: send start message (myname is >SAPdev01_ECD_00                         <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Mon Mar 17 11:04:22 2014
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7010, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1048]
    DpMsgAdmin: Set patchno for this platform to 32
    Release check o.K.
    Mon Mar 17 11:05:01 2014
    my types changed after wp death/restart 0xbf --> 0xbe
    my types changed after wp death/restart 0xbe --> 0xbc
    my types changed after wp death/restart 0xbc --> 0xb8
    my types changed after wp death/restart 0xb8 --> 0xb0
    my types changed after wp death/restart 0xb0 --> 0xa0
    my types changed after wp death/restart 0xa0 --> 0x80
    *** DP_FATAL_ERROR => DpWPCheck: no more work processes
    *** DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:11 2014
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)            Mon Mar 17 05:35:11 2014
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     3440 Ended         no      1   0        0                                                                         
    1 DIA     3448 Ended         no      1   0        0                                                                         
    2 DIA     3456 Ended         no      1   0        0                                                                         
    3 DIA     3468 Ended         no      1   0        0                                                                         
    4 DIA     3476 Ended         no      1   0        0                                                                         
    5 DIA     3484 Ended         no      1   0        0                                                                         
    6 DIA     3492 Ended         no      1   0        0                                                                         
    7 DIA     3500 Ended         no      1   0        0                                                                         
    8 DIA     3508 Ended         no      1   0        0                                                                         
    9 DIA     3516 Ended         no      1   0        0                                                                         
    10 UPD     3524 Ended         no      1   0        0                                                                         
    11 ENQ     3532 Ended         no      1   0        0                                                                         
    12 BTC     3540 Ended         no      1   0        0                                                                         
    13 BTC     3548 Ended         no      1   0        0                                                                         
    14 BTC     3556 Ended         no      1   0        0                                                                         
    15 SPO     3564 Ended         no      1   0        0                                                                         
    16 UP2     3572 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics            Mon Mar 17 05:35:11 2014
    ===========================
    +------+--------+--------+--------+--------+--------+
    |  Typ |    now |   high |    max | writes |  reads |
    +------+--------+--------+--------+--------+--------+
    | NOWP |      0 |      2 |   2000 |      5 |      5 |
    +------+--------+--------+--------+--------+--------+
    |  DIA |      5 |      5 |   2000 |      5 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  UPD |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  ENQ |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  BTC |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  SPO |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  UP2 |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    max_rq_id        12
    wake_evt_udp_now    0
    wake events          total     8,  udp     4 ( 50%),  shm     4 ( 50%)
    since last update    total     8,  udp     4 ( 50%),  shm     4 ( 50%)
    Dump of tm_adm structure:            Mon Mar 17 05:35:11 2014
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks            Mon Mar 17 05:35:11 2014
    =============================
    Slots: 300, Used: 1, Max: 0
    +------+--------------+----------+-------------+
    |   id | owner        |   pid    | eyecatcher  |
    +------+--------------+----------+-------------+
    |    0 | DISPATCHER   |       -1 | *WPCAAD000* |
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:16 2014
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >SAPdev01_ECD_00                         < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (3424) (SOFT_KILL)
    Stop icman
    killing process (3432) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:3424  HANDLE:776)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:17 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:3424  HANDLE:776)
    wait for end of icman
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:18 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:19 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:20 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:21 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:22 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:23 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:24 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:25 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:26 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:27 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3432  HANDLE:784)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=893
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Mar 17 11:05:28 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:3432  HANDLE:784)
    DpStartStopMsg: send stop message (myname is >SAPdev01_ECD_00                         <)
    DpStartStopMsg: Write AD_STARTSTOP message with type=  0, name=SAPdev01_ECD_00     , sapsysnr= 0, hostname=SAPdev01                                                       
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Mon Mar 17 11:05:29 2014
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12829]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 772 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 772 (pos=2)
    SiSelNRemove: removed sock 772
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 772
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 3228) [dpxxdisp.c   11045]
    Good Bye .....
    dev_ms:
    trc file: "dev_ms", trc level: 1, release: "701"
    [Thr 2596] Sun Mar 16 17:31:39 2014
    [Thr 2596] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   562 (PC with Windows NT)
    relno      7010
    patchlevel 0
    patchno    11
    intno      20020600
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        4004
    [Thr 2596] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 4004) [msxxserv.c   1853]
    [Thr 2596] load acl file = E:\usr\sap\ECD\SYS\global\ms_acl_info.DAT
    [Thr 2596] MsGetOwnIpAddr: my host addresses are :
    [Thr 2596]   1 : [192.168.42.205] SAPdev01 (HOSTNAME)
    [Thr 2596]   2 : [127.0.0.1] SAPdev01 (LOCALHOST)
    [Thr 2596]   3 : [169.254.221.8] SAPdev01 (NILIST)
    [Thr 2596] MsHttpInit: full qualified hostname = SAPdev01
    [Thr 2596] HTTP logging is switch off
    [Thr 2596] set HTTP state to LISTEN
    [Thr 2596] ms/icf_info_server : deleted
    [Thr 2596] *** I listen to port sapmsECD (3600) ***
    [Thr 2596] *** I listen to internal port 3900 (3900) ***
    [Thr 2596] *** HTTP port 8100 state LISTEN ***
    [Thr 2596] CUSTOMER KEY: >J0169343196<
    [Thr 2596] build version=701.2008.03.06
    [Thr 2596] Sun Mar 16 17:32:52 2014
    [Thr 2596] *** ERROR => MsSClientHandle: no server provides service ENQ  (4), requested from SAPdev01_ECD_00 [msxxserv.c   4711]
    [Thr 3648] Sun Mar 16 17:39:27 2014
    [Thr 3648] MsSExit: received SIGINT (2)
    [Thr 3648] ***LOG Q02=> MsSHalt, MSStop (Msg Server 4004) [msxxserv.c   6021]
    dev_w0:
    trc file: "dev_w0", trc level: 1, release: "701"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Sun Mar 16 17:31:45 2014
    B  create_con (con_name=R/3)
    B  Loading DB library 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll' ...
    B  Library 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll' loaded
    B  Version of 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.31)
    B  New connection 0 created
    M sysno      00
    M sid        ECD
    M systemid   562 (PC with Windows NT)
    M relno      7010
    M patchlevel 0
    M patchno    32
    M intno      20020600
    M make:      multithreaded, Unicode, 64 bit, optimized
    M pid        3256
    M
    M  kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3256) [dpxxdisp.c   1348]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)        29792    (1752)
    M  DpShMCreate: sizeof(tm_adm)        5912704    (29416)
    M  DpShMCreate: sizeof(wp_ca_adm)        24064    (80)
    M  DpShMCreate: sizeof(appc_ca_adm)    8000    (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    M  DpShMCreate: sizeof(comm_adm)        552080    (1088)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)        0    (104)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)        0    (72)
    M  DpShMCreate: sizeof(vmc_adm)        0    (1864)
    M  DpShMCreate: sizeof(wall_adm)        (41664/36752/64/192)
    M  DpShMCreate: sizeof(gw_adm)    48
    M  DpShMCreate: SHM_DP_ADM_KEY        (addr: 000000000AA00050, size: 6614144)
    M  DpShMCreate: allocated sys_adm at 000000000AA00050
    M  DpShMCreate: allocated wp_adm at 000000000AA02270
    M  DpShMCreate: allocated tm_adm_list at 000000000AA096D0
    M  DpShMCreate: allocated tm_adm at 000000000AA09730
    M  DpShMCreate: allocated wp_ca_adm at 000000000AFACFB0
    M  DpShMCreate: allocated appc_ca_adm at 000000000AFB2DB0
    M  DpShMCreate: allocated comm_adm at 000000000AFB4CF0
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 000000000B03B980
    M  DpShMCreate: allocated gw_adm at 000000000B03BA00
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 000000000B03BA30
    M  DpShMCreate: allocated wall_adm at 000000000B03BA40
    M  rdisp/queue_size_check_value :  -> off
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host SAPdev01
    M  calling db_connect ...
    C  Callback functions for dynamic profile parameter registered
    C  Thread ID:2876
    C  Thank You for using the SLODBC-interface
    C  Using dynamic link library 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      31
    C    patchcomment Handle long parameters as LOBs (1296540)
    C  Local connection used on SAPDEV01 to named instance: lpc:SAPDEV01\ECD
    C  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
    C  (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
    C  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
    C  (0) [IM006] [Microsoft][SQL Server Native Client 10.0]Packet size change not supported by server, default used
    C  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
    C  (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
    C  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
    C  (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
    C  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
    C  (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
    C  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
    C  (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
    C  ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
    C  (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
    C  Connection 0 failed using Driver={SQL Server Native Client 10.0};Server=SAPDEV01\ECD;AutoTranslate=no;Trusted_Connection=yes;WSID=SAPDEV01;APP=R3D00 comm rd ODBC;Database=ECD;
    C 
    B  ***LOG BY2=> sql error 18456  performing CON [dbsh#2 @ 1208] [dbsh    1208 ]
    B  ***LOG BY0=> [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'. [dbsh#2 @ 1208] [dbsh    1208 ]
    B  ***LOG BY2=> sql error 18456  performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'. [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1449]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10563]
    M 
    M  Info for wp 0
    M 
    M    pid = 3256
    M    severity = 0
    M    status = 0
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server SAPdev01_ECD_00 on host SAPdev01 (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Sun Mar 16 17:31:45 2014
    M  *  RELEASE     701
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10783
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   723]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 3256) [dpnttool.c   334]

  • Oracle 11g database instance is not coming up

    Hi,
    I have installed Oracle DB 11g(11.2.0) on windows 2003 server.
    everythig was running fine. Later according to my product requirement i turned ON the archive log and started running my product services which was creating more records to the database. During the process Database instance has gone down and its not coming up.
    i had set the following parameter to trun on the archive log.
    ALTER SYSTEM SET DB_RECOVERY_FILE_DEST = 'C:\app\user\flash_recovery_area\BOOKTST';
    ALTER SYSTEM SET DB_RECOVERY_FILE_DEST_SIZE = 2G;
    ALTER SYSTEM SWITCH LOGFILE;
    Please help me to solve this problem, oracle DB services and tnslistener are running successfully but the database instance is not coming up.
    Thanks
    Krishna

    Hi,
    probably archive log is causing the problem but i am new to archive log so not able to solve this.
    Here are the content of alert_orcl.log file:
    ARC1: Becoming the heartbeat ARCH
    Errors in file c:\app\user\diag\rdbms\orcl\orcl\trace\orcl_ora_3104.trc:
    ORA-19815: WARNING: db_recovery_file_dest_size of 2147483648 bytes is 100.00% used, and has 0 remaining bytes available.
    Errors in file c:\app\user\diag\rdbms\orcl\orcl\trace\orcl_arc2_2124.trc:
    ORA-19815: WARNING: db_recovery_file_dest_size of 2147483648 bytes is 100.00% used, and has 0 remaining bytes available.
    You have following choices to free up space from recovery area:
    1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
    You have following choices to free up space from recovery area:
    then consider changing RMAN ARCHIVELOG DELETION POLICY.
    1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
    2. Back up files to tertiary device such as tape using RMAN
    then consider changing RMAN ARCHIVELOG DELETION POLICY.
    BACKUP RECOVERY AREA command.
    2. Back up files to tertiary device such as tape using RMAN
    3. Add disk space and increase db_recovery_file_dest_size parameter to
    BACKUP RECOVERY AREA command.
    reflect the new space.
    3. Add disk space and increase db_recovery_file_dest_size parameter to
    4. Delete unnecessary files using RMAN DELETE command. If an operating
    reflect the new space.
    system command was used to delete files, then use RMAN CROSSCHECK and
    4. Delete unnecessary files using RMAN DELETE command. If an operating
    DELETE EXPIRED commands.
    system command was used to delete files, then use RMAN CROSSCHECK and
    DELETE EXPIRED commands.
    Errors in file c:\app\user\diag\rdbms\orcl\orcl\trace\orcl_ora_3104.trc:
    ORA-19809: limit exceeded for recovery files
    ORA-19804: cannot reclaim 47122432 bytes disk space from 2147483648 limit
    ARCH: Error 19809 Creating archive log file to 'C:\APP\USER\FLASH_RECOVERY_AREA\BOOKTST\ORCL\ARCHIVELOG\2011_04_19\O1_MF_1_737_%U_.ARC'
    Errors in file c:\app\user\diag\rdbms\orcl\orcl\trace\orcl_ora_3104.trc:
    ORA-16038: log 2 sequence# 737 cannot be archived
    ORA-19809: limit exceeded for recovery files
    ORA-00312: online log 2 thread 1: 'C:\APP\USER\ORADATA\ORCL\REDO02.LOG'
    Errors in file c:\app\user\diag\rdbms\orcl\orcl\trace\orcl_arc2_2124.trc:
    ORA-19809: limit exceeded for recovery files
    ORA-19804: cannot reclaim 48109056 bytes disk space from 2147483648 limit
    ARC2: Error 19809 Creating archive log file to 'C:\APP\USER\FLASH_RECOVERY_AREA\BOOKTST\ORCL\ARCHIVELOG\2011_04_19\O1_MF_1_739_%U_.ARC'
    USER (ospid: 3104): terminating the instance due to error 16038
    Tue Apr 19 13:14:28 2011
    ARC3 started with pid=23, OS id=3748
    Instance terminated by USER, pid = 3104
    Thanks
    Krishna

  • Dispatcher is not coming up

    Hi all,
    One of the apps in the production system is not coming up after the windows patching,  there are 2 servers in the same box  the other one came up fine with no issues.
    Even the Work process  log is also not generated.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    trc file: "dev_disp", trc level: 1, release: "46D"
    Tue Jun 21 15:11:31 2011
    relno      4640
    patchlevel 0
    patchno    2513
    intno      0
    pid        13548
    ***LOG Q00=> DpSapEnvInit, DPStart (71 13548) [dpxxdisp.c   921]
    Tue Jun 21 15:11:35 2011
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust your DNS settings [dpxxtool2.c  3171]
    MtxInit: -2 0 0
    DpIPCInit: start server >xxxx_71     <
    ERROR => DpShMCreate: ShmCreate SHM_DP_ADM_KEY [dpxxtool2.c  1335]
    ERROR => DpIPCInit: DpShMCreate [dpxxtool2.c  409]
    DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    call semaphore clean-up function ...
    ***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c   390]
    C-STACK -
    SAP (R) - R/3(TM) Callstack, Version 1.0
    Copyright (C) SAP AG. All rights reserved.
    Application exception occurred:
    Exception : c0000005 (Access Violation)
    App       : disp+work.exe (pid=13548)
    When      : 6/21/2011 15:11:35.782
    Threads   : 2
    Computer Name       xxxxxx
    User Name           : SAPServicexxx
    Number of Processors: 32
    Processor Type: EM64T Family 6 Model 46 Stepping 6
    Windows Version     : 5.2 Current Build: 3790
    Stack Dump for Thread Id 3ca8
    eax=00000000 ebx=00000003 ecx=016ea020 edx=0319f68c esi=00000000 edi=00000000
    eip=00427bcb esp=0319fdf8 ebp=00000000 iopl=0         nv up ei pl nz na po nc
    cs=0023  ss=002b  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
    function : <nosymbols>
            00427bb0 ff742404         push    dword ptr [esp+0x4]    ss:0633e6a3=????????
            00427bb4 ffd0             call    eax
            00427bb6 59               pop     ecx
            00427bb7 c3               ret
            00427bb8 a1bcf06c01       mov     eax,[016cf0bc]         ds:016cf0bc=00000000
            00427bbd 56               push    esi
            00427bbe 57               push    edi
            00427bbf 8b7c240c         mov     edi,[esp+0xc]          ss:0633e6a3=????????
            00427bc3 8bf7             mov     esi,edi
            00427bc5 69f698020000     imul    esi,esi,0x298
    FAULT-> 00427bcb 837c064800     cmp dword ptr [esieax0x48],0x0 ds:0319e8ab=467f0048
            00427bd0 7f46             jg      00427c18
            00427bd2 833db89f6e0101   cmp   dword ptr [016e9fb8],0x1 ds:016e9fb8=00000003
            00427bd9 0f8c45030000     jl      00427f24
            00427bdf e8ad910a00       call    004d0d91
            00427be4 68310a0000       push    0xa31
            00427be9 689060d400       push    0xd46090
            00427bee e8e6d0ffff       call    00424cd9
            00427bf3 59               pop     ecx
            00427bf4 50               push    eax
            00427bf5 689c60d400       push    0xd4609c
            00427bfa 68bc9f6e01       push    0x16e9fbc
    --> Stack Back Trace <--
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    00000000 00000000 00000000 00000000 00000000 00000000 disp+work!<nosymbols>
    Stack Dump for Thread Id 2f70
    eax=00000000 ebx=0036f190 ecx=00000000 edx=00000000 esi=77bd0888 edi=00000000
    eip=7d61cd3e esp=0769fc78 ebp=0769fcb8 iopl=0         nv up ei pl nz na pe nc
    cs=0023  ss=002b  ds=002b  es=002b  fs=0053  gs=002b             efl=00000202
    function : NtFsControlFile
            7d61cd29 b836000000       mov     eax,0x36
            7d61cd2e b91b000000       mov     ecx,0x1b
            7d61cd33 8d542404         lea     edx,[esp+0x4]          ss:0a83e523=????????
            7d61cd37 64ff15c0000000   call   dword ptr fs:[000000c0] fs:000000c0=????????
            7d61cd3e c22800           ret     0x28
    --> Stack Back Trace <--
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    0769fcb8 00c38ed8 000004f4 00000000 00000000 0036f0f8 ntdll!NtFsControlFile
    0769ff84 77bcb530 00000000 00000000 00000000 0036f190 disp+work!<nosymbols>
    0769ffb8 7d4dfe37 0036f190 00000000 00000000 0036f190 MSVCRT!endthreadex
    0769ffec 00000000 77bcb4bc 0036f190 00000000 00000000 kernel32!FlsSetValue
    call clean-up function ...
    SigICallExitRoutine: call exithandler (DpHalt)
    DpHalt: shutdown server >mudpap01_UDP_71     <
    Switch off Shared memory profiling
    not attached to the message server
    ***LOG Q05=> DpHalt, DPStop ( 13548) [dpxxdisp.c   7267]
    removing Event-Managment
    ERROR => EvtRmMgt: Evt Mgt Table not init'd [evtnt.c      360]
    (didn't work)
    ShmCleanup SHM_SYS_ADM_KEY
    ShmCleanup SHM_DP_ADM_KEY
    ERROR => ShmDelete: Inv. Key=2  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 2 [shmnt.c      747]
    ShmCleanup SHM_DP_CA_KEY
    ERROR => ShmDelete: Inv. Key=3  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 3 [shmnt.c      747]
    ShmCleanup SHM_PF_KEY
    ERROR => ShmDelete: Inv. Key=4  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 4 [shmnt.c      747]
    ShmCleanup SHM_PRES_BUF
    ERROR => ShmDelete: Inv. Key=14  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 14 [shmnt.c      747]
    ShmCleanup SHM_CALI_BUFFER
    ERROR => ShmDelete: Inv. Key=11  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 11 [shmnt.c      747]
    ShmCleanup SHM_DB_TBUFF
    ERROR => ShmDelete: Inv. Key=19  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 19 [shmnt.c      747]
    ShmCleanup SHM_DB_TBUFF_P
    ERROR => ShmDelete: Inv. Key=33  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 33 [shmnt.c      747]
    ShmCleanup SHM_DB_STBUFF
    ERROR => ShmDelete: Inv. Key=41  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 41 [shmnt.c      747]
    ShmCleanup SHM_DB_TTBUFF
    ERROR => ShmDelete: Inv. Key=42  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 42 [shmnt.c      747]
    ShmCleanup SHM_DB_FTBUFF
    ERROR => ShmDelete: Inv. Key=43  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 43 [shmnt.c      747]
    ShmCleanup SHM_DB_SNTBUFF
    ERROR => ShmDelete: Inv. Key=45  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 45 [shmnt.c      747]
    ShmCleanup SHM_DB_IRBUFF
    ERROR => ShmDelete: Inv. Key=44  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 44 [shmnt.c      747]
    ShmCleanup SHM_DB_OBJ_BUFFER
    ERROR => ShmDelete: Inv. Key=54  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 54 [shmnt.c      747]
    ShmCleanup SHM_ROLL_AREA_KEY
    ERROR => ShmDelete: Inv. Key=9  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 9 [shmnt.c      747]
    ShmCleanup SHM_PAGING_AREA_KEY
    ERROR => ShmDelete: Inv. Key=8  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 8 [shmnt.c      747]
    ShmCleanup SHM_ROLL_ADM_KEY
    ERROR => ShmDelete: Inv. Key=17  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 17 [shmnt.c      747]
    ShmCleanup SHM_PAGING_ADM_KEY
    ERROR => ShmDelete: Inv. Key=18  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 18 [shmnt.c      747]
    ShmCleanup SHM_PXA_KEY
    ERROR => ShmDelete: Inv. Key=6  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 6 [shmnt.c      747]
    ShmCleanup SHM_ENQ_TABLE_KEY
    ERROR => ShmDelete: Inv. Key=34  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 34 [shmnt.c      747]
    ShmCleanup SHM_ENQID_KEY
    ERROR => ShmDelete: Inv. Key=58  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 58 [shmnt.c      747]
    ShmCleanup SHM_VB_ADM_KEY
    ERROR => ShmDelete: Inv. Key=7  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 7 [shmnt.c      747]
    ShmCleanup SHM_DB_POOL
    ERROR => ShmDelete: Inv. Key=40  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 40 [shmnt.c      747]
    ShmCleanup SHM_EM_ADM
    ERROR => ShmDelete: Inv. Key=51  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 51 [shmnt.c      747]
    ShmCleanup SHM_MSBUF
    ERROR => ShmDelete: Inv. Key=52  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 52 [shmnt.c      747]
    ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
    ERROR => ShmDelete: Inv. Key=30  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 30 [shmnt.c      747]
    ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
    ERROR => ShmDelete: Inv. Key=56  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 56 [shmnt.c      747]
    ShmCleanup SHM_POOL_0
    ERROR => ShmDelete: Inv. Key=10  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 10 [shmnt.c      747]
    ShmCleanup SHM_PROFILE
    removing Semaphore-Management
    removing Request Queue
    ERROR => ShmDelete: Inv. Key=31  [shmnt.c      676]
    ERROR => ShmCleanup: ShmDelete failed for Key: 31 [shmnt.c      747]
    ERROR => DpRqIQRemove: ShmDelete [dpxxqueu.c   558]
    closing connect handles (dgm + tcp)
    ***LOG Q05=> DpHalt, DPStop ( 13548) [dpxxdisp.c   7454]
    return from clean-up function ...
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Changed the extendend memory and other parameters  still not able to bring  it up...
    Please suggest...
    Thanks,
    Subhash.G

    Hi,
    sappfpar result , no errors and warnings reported.
    +++++++++++++++++++++++++++++++++++++++++++++++
    Shared memory disposition overview
    ================================================================
    Key:        1  Size:        2000 (   0.0 MB) System administration
    Key:        2  Size:    18828644 (  18.0 MB) Disp. administration tables
    Key:        3  Size:   178144000 ( 169.9 MB) Disp. communication areas
    Key:        4  Size:      541048 (   0.5 MB) statistic area
    Key:        5  Size:        4096 (   0.0 MB) SCSA area
    Key:        6  Size:   851968000 ( 812.5 MB) ABAP program buffer
    Key:        7  Size:       14838 (   0.0 MB) Update task administration
    Key:        8  Size:   134217828 ( 128.0 MB) Paging buffer
    Key:        9  Size:   134217828 ( 128.0 MB) Roll buffer
    Key:       11  Size:      500000 (   0.5 MB) Factory calender buffer
    Key:       12  Size:     3000000 (   2.9 MB) TemSe Char-Code convert Buf.
    Key:       13  Size:    10500000 (  10.0 MB) Alert Area
    Key:       14  Size:    58500096 (  55.8 MB) Presentation buffer
    Key:       16  Size:       22400 (   0.0 MB) Semaphore activity monitoring
    Key:       17  Size:      753764 (   0.7 MB) Roll administration
    Key:       18  Size:      458852 (   0.4 MB) Paging adminitration
    Key:       19  Size:   460000256 ( 438.7 MB) Table-buffer
    Key:       30  Size:       91500 (   0.1 MB) Taskhandler Runtime Admin
    Key:       31  Size:     4206000 (   4.0 MB) Dispatcher request queue
    Key:       33  Size:    61440000 (  58.6 MB) Table buffer, part.buffering
    Key:       41  Size:     9010000 (   8.6 MB) DB statistics buffer
    Key:       42  Size:    52900592 (  50.4 MB) DB TTAB buffer
    Key:       43  Size:    87894392 (  83.8 MB) DB FTAB buffer
    Key:       44  Size:    46934392 (  44.8 MB) DB IREC buffer
    Key:       45  Size:    29526392 (  28.2 MB) DB short nametab buffer
    Key:       46  Size:       20480 (   0.0 MB) DB sync table
    Key:       47  Size:    71681024 (  68.4 MB) DB CUA buffer
    Key:       48  Size:      300000 (   0.3 MB) Number range buffer
    Key:       49  Size:     2769392 (   2.6 MB) Spool admin (SpoolWP+DiaWP)
    Key:       51  Size:     3200000 (   3.1 MB) Extended memory admin.
    Key:       52  Size:       40000 (   0.0 MB) Message Server buffer
    Key:       54  Size:   262152192 ( 250.0 MB) Export/Import buffer
    Key:       55  Size:        8192 (   0.0 MB) Spool local printer+joblist
    Key:       57  Size:     1048576 (   1.0 MB) Profil in shared Memory
    Key:       58  Size:        4096 (   0.0 MB) EnqId
    Key:     1002  Size:      400000 (   0.4 MB) Performance monitoring V01.0
    Nr of operating system shared memory segments: 36
    Shared memory resource requirements estimated
    ================================================================
    Total Nr of shared segments required.....:         36
    Shared memory segment size required min..:  851968000 ( 812.5 MB)
    Swap space requirements estimated
    ================================================
    Shared memory....................: 2370.2 MB
    Processes........................:  468.3 MB
    Extended Memory .................: 10260.0 MB
    Total, minimum requirement.......: 13098.4 MB
    Process local heaps, worst case..: 1908.0 MB
    Total, worst case requirement....: 15006.4 MB
    Errors detected..................:    0
    Warnings detected................:    0
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    We are windows 2003 with sqlserver 2005, is there any  equal command as cleanipc in UNIX for windows to clean the share memory .
    Thanks,
    Subhash.G

  • ERROR: Start SAP ERP on Sybase ASE, Sybase is Not coming UP

    Hi ,
             We installed EHP7 on ASE 15.0& Linux, After that we stopped the server and while starting it is not coming Up it is saying system crash, can you please suggest me.
    we don't have backup, it is newly installed system.
    Startdb.log:
    ------------------------------ Tue Jul 22 13:32:24 IST 2014
    LOGFILE FOR STARTING SYBASE ASE
    starting database XXX ...
    ------------------------------ Tue Jul 22 13:32:25 IST 2014
    checking required environment variables
    ------------------------------ Tue Jul 22 13:32:25 IST 2014
    check if Sybase ASE processes are running
    ASE instance not available
    *** ERROR:ASE instance possibly left running when system
        went down(system crash?).
        Notify Database Administrator.
    ------------------------------ Tue Jul 22 13:32:25 IST 2014
    check if Sybase Backupserver is running
    Backupserver instance not available
    Database not available
    parse level 0: identified message 'Database 'master' is now online.'
    parse level 1: identified message 'Database 'tempdb' is now online.'
    parse level 2: identified message 'Database 'sybsystemprocs' is now online.'
    ------------------------------ Tue Jul 22 13:48:32 IST 2014
    /usr/sap/XXX/SYS/exe/run/startdb was killed or interrupted. Terminating.
    regards,
    Rajshekar

    Hi Raj,
    Please check solution in SCN thread NW CE 7.3 doesn't start
    Similar issue is discussed here
    Regards,
    Deepak Kori

  • Java Server node and dispatcher not coming up in ECC

    Hi,
    We are using ECC6.0,We have moved the node 2 to node 1, java is not coming after cluster has moved to node 1.
    We are getting the folloeing error
    #1.5 #005056B83E3D00000000001000005CCC0004AA6F7B4BAF13#1313295693490#com.sap.engine.core.configuration##com.sap.engine.core.configuration#######Thread[Thread-1,5,main]##0#0#Error#1#/System/Server#Plain###Error occurred: Secure Store lib Dir does not exist F:/usr/sap/ECQ/SYS/global/security/lib
    engine
    =======================================================
    com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist F:/usr/sap/ECQ/SYS/global/security/lib
    engine
         at com.sap.engine.core.configuration.impl0.ConfigurationManagerImpl.initInternal(ConfigurationManagerImpl.java:139)
         at com.sap.engine.core.configuration.AbstractConfigurationManagerImpl.init(AbstractConfigurationManagerImpl.java:164)
         at com.sap.engine.core.Framework.loadSingleManager(Framework.java:582)
         at com.sap.engine.core.Framework.loadManagers(Framework.java:258)
         at com.sap.engine.core.Framework.start(Framework.java:190)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.boot.FrameThread.run(FrameThread.java:61)
         at java.lang.Thread.run(Thread.java:534)
    #1.5 #005056B83E3D00000000001200005CCC0004AA6F7B4BB178#1313295693490#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######Thread[Thread-1,5,main]##0#0#Error#1#/System/Server#Plain###Loading: ConfigurationManager returned false! #
    #1.5 #005056B83E3D00000000001400005CCC0004AA6F7B4BB2CD#1313295693490#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######Thread[Thread-1,5,main]##0#0#Error#1#/System/Server#Plain###Kernel not loaded. System halted.#
    #1.5 #005056B83E3D00000000002100005BBC0004AA6F7DB600BF#1313295734008#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######Thread[Thread-1,5,main]##0#0#Fatal#1#/System/Server/Critical#Plain###Critical shutdown was invoked. Reason is: Error getting confirmation reply during attach to cluster.#
    Thr 24504] Sun Aug 14 04:21:43 2011
    [Thr 24504] JHVM_RegisterNatives: com.sap.bc.krn.perf.PerfTimes
    [Thr 24504] JHVM_RegisterNatives: com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 24504] JLaunchISetClusterId: set cluster id 103414950
    [Thr 23852] Sun Aug 14 04:22:14 2011
    [Thr 23852] JLaunchIExitJava: exit hook is called (rc = -334)
    [Thr 23852] **********************************************************************
    [Thr 23852] *** ERROR => The Java VM terminated with a non-zero exit code.
    [Thr 23852] *** Please see SAP Note 943602 , section 'J2EE Engine exit codes'
    [Thr 23852] *** for additional information and trouble shooting.
    [Thr 23852] **********************************************************************
    [Thr 23852] JLaunchCloseProgram: good bye (exitcode = -334)
    Please suggest me
    Vijayashree.R

    Hi,
    Are Java directories move to node 1 (i.e. Java directories are part of clustered disk or not) ?
    Thanks
    Sunny

  • IMac making beeping noises. Not during start-up.

    My iMac is a 20'' Intel based. I got it early 2007, it was the generation right before they released the 24''.
    I am running all the latest updates that I can find/am aware of.
    My iMac is making beeping noises. The kind that come from inside the computer, alerting me about something bad happening to my hardware. It is NOT beeping at me during start up. It beeps 3 different tones at me. Not all 3 every time, but overall it will beep 3 different tones at me. There is no order as to how many beeps or what tones. The noise seems to be coming from the bottom left hand corner of the computer, if you were facing it like you were using it.
    While I understand that something in the computer is failing or flailing, I cannot find any documentation or even forum posts on this topic. Every single place I search always yields pages about the 3 beep RAM notification at start up. This is very frustrating and not helpful.
    Can anyone give me any more info about what is failing in my computer? Or at least stop my search and assure me that its something I will have to send it in for?
    It makes the beeps the whole time it is running. Anytime a new webpage is loading, anytime I bring up my dashboard, anytime I open up a new finder window. Pretty much anytime the computer has to do anything. It isn't beeping as I type this post, but as soon as I click 'Post Message' it will beep at me.
    I just reset PRAM or whatever it is they suggest you reset. I have reseated my RAM.
    I am going crazy and need some help.
    Message was edited by: SubcutaneousPhat

    Run Apple Hardware Test (AHT) on your machine, it is on the original DVD that came with your computer or you can access it by holding down the "D" key when starting your Mac.

  • During Excise invoice capturing, BED and other duties not coming

    Hi experts,
    During Excise capturing with j1iex_c t-code for scheduling w.r.t. scheduling agreement, BED and other excise duties are not coming automatically. But in case of other scheduling agreements all the duties are coming l...what could be the reason for the same...need ur expert comments...
    Thanks in advance..
    With best Regards,
    Bharat B

    Hi Sudhir,
    Thanks for your quick reply. I have checked both the settings..its already maintained..please suggest me more inputs..
    thanks in advance..
    regards,
    Bharat B

Maybe you are looking for

  • Is there any way to pass Mail.app rules to Outlook?

    Hello, I want to use the same rules i use in Mail app from OS X in Outlook. Can you help me find the way to do it, because I have tons of rules and don't want to copy them one by one.

  • Dynamic Structure in Interface and Forms

    Hallo experts, I am creating XML from the printreport. In print Report I am creating with RTTI a Structure and a Tabletype at runtime. Is it possible to give this type in Adobe Interface as type at runtime. The problem is that the XML looks like this

  • UNDO Tablespace is used to fill frequently

    Hi Experts, We have an issue with the UNDO tablespace frequently,where we dont see the space occupied for any active transactions and i can see only for "Retained for Use by Queries or Flashback" i.e. more than 2000M. Can any one let me know how to p

  • Display audio source timecode in an export

    surely this is possible, alongside program code? fingers crossed, n

  • Lightroom 5 catalog.Ircat- journal

    Hello, i have a question about Lightroom catalog, becauce my disk has broken  and i cant read data from file: lightroom 5 catalog.Ircat, but i can copy data from file  lightroom 5 catalog.Ircat- journal. I read information about this file and this fi