Instance not started with oracle 9i and solaris 9

Hi!
I installed oracle 9i for solaris 9 and when the database creates the system halt at 50% (créated and start oracle instance).
Sorry, my english is bad
thx
laurent

I suggest you use install_prep.sh to check if your server environment is fine to start oracle.
See note 189256.1 on metalink and download file at http://metalink.oracle.com/cgi-bin/cr/getfile_cr.cgi?283805

Similar Messages

How to start with ORACLE APPS and ORACLE APPLICATION SERVER?

Hi !!
I am a little known with oracle database. But recently i have been asked to update my skills with oracle apps and oracl e application server. I do not have any prior experience with these products of oracle and I really have 0 knowledge of it.
Can anybody help me find a start with oracle apps and oracle as?
Thanks.

Welcome
http://www.oracle.com/technology/documentation/applications.html
You can download from here.
Regards
Asif Kabir
-- If helpful mark the post as correct/helpful, also close the thread as answered.

A 305- S6825 will not start with the battery and charger. There's no light, no noise on fan or HDD

PC will not start with the battery and charger. There's no light, no noise on fan, hard drive and CD writer. The hard drive, fan and charger are new. But I was havingproblems and sudden blackouts System 32. Try several times to install theoperating system but the pc turned off suddenly and restarted until I stop working completely. Now it does nothing and no light. I hope it can help me I need torespect and love very much this notebook.
Thanks in advance
Jose Echevarria
[email protected]

Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections. If it still won't start, remove the battery and start with just the AC power. Next try without the AC power and just the battery.
- Peter

Why does Vine Server not start with this script and work with the other?

I have the preferences of Vine Server set to start/run automatically when opening the programme.
If I double click the icon it works. Opens and starts.
If I use
activate application "Vine Server"
it opens but does not start.
If I use:
tell application "Finder"
activate
open application file "Vine Server.app" of folder "Vine Server 3" of folder "Applications" of startup disk
end tell
it opens and starts.
Anybody any idea as to why?
This seems to happen since I upgraded form 10.4 to 10.5.

Hello
Do you have multiple versions of Vine Server application, perhaps?
If so, that might cause the described behaviour.
You may try using full path to the current Vine Server application such as -
activate application "/Applications/Vine Server 3/Vine Server.app"
or -
tell application "/Applications/Vine Server 3/Vine Server.app" to activate
H

General questions on how to get started with Oracle OEPE and databases

My company has a server in the cloud, written using Ruby on Rails. The server is designed to work with a browser, so it communicates via standard HTTP.
The server has an SQL database.
The server sends and receives HTTP requests from clients, which are then used to either update the database or retrieve information from the database.
The database can be edited from a separate admin dashboard.
I have recently rewritten our client software as a native android app. The new app makes calls to the server that look like browser calls. I have used Eclipse to develop the Android app.
Sounds pretty standard so far, right? :-)
I now want to replace the Ruby on Rails server with a new Java server that I will write. I want to use Eclipse to develop the new server. During development, I want to be able to have the new Android app communicate with the development server software that will reside on my desktop.
So I was thinking that Oracle's tools might be perfect for me, if only I knew which tools to use. There are lot to choose from. :-)
I believe that all I need is OEPE and a database. I would like to keep it pretty simple. I don't want to learn 20 new tools. It will be enough effort to become proficient in OEPE and a database.
I looked at "Oracle Database Tools >> Connecting to an Oracle database" in the help files for OEPE 12.1.1. I tried going through the help files for Database connections, but I got to a "New Connection Profile" form that asks me for a SID, a user name, a password, etc. I don't have any of those. I tried to enter some data in the forms and ping the database, but I could not get any results from the ping. So my first question is: Do I have to sign up for an Oracle database in the cloud or is there a database contained within the OEPE software that I just installed. I will have to do the former anyway when I eventually deploy my new server software, so maybe the right thing to do is sign up for the "database in the cloud" service now, and use it during development.
The other question I have is about getting a simple application client and server application sample. I found a "hello world" example at http://docs.oracle.com/cd/E13224_01/wlw/docs103/guide/webapplications/workshopJSP/tutorialJSP/TutorialJSPMakeJSP.html, but that is for WLS 10.3 and it doesn't seem to match the 12.1.1 software very well.
So does anybody know where I can find a simple client and server sample program for WLS 12.1.1?
If I can get these two questions answered, I can start making some progress.
Thanks in advance to anybody who can help me navigate this minefield.
Jim

I wanted to add some information to my previous posting.
1. The server I will develop will communicate ONLY with Android and iOS native apps, so the interface will not be HTML or XML. The information sent by the server to the client will be JSON. The information sent by the client to the server will be HTTP parameters, usually in the form of URL-encoded form data. This is not a browser-to-server server interface, so JSP is probably not appropriate for the server. The communication protocol will be HTTP.
2. I don't need anything fancy on the server side. The server will simply be a Java program that emits JSON responses to the client and receives URL-encoded form data from the client. The server program will also make database queries and update the database.
3. I don't understand how my native Android app will be able to communicate with my development server code running on my desktop. I want that communication to be over the internet, but my desktop does not have a static IP address, so I don't see how the app will be able to address the development server software on my desktop PC. I don't want to deploy the server software into the cloud every time I start a debug run, but I don't see any other way for my app to be able to address the server code over the Internet.
If anybody has any ideas, I would appreciate hearing them.

Xorg not start with 'radeon' driver, and gnome not start with 'vesa'.

Hey all.
I just install the fresh installer for Arch. All my system its updated for last date.
I can't running the Xorg server with 'radeon' driver (xf86-...-ati), But in 'vesa' Xorg working ok.
Anywhere, with 'vesa' the gnome can't start..
What is log you need for help me?
This is my last Xorg.0.log (with 'radeon')
[ 67.986]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 67.986] X Protocol Version 11, Revision 0
[ 67.987] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 67.987] Current Operating System: Linux yakir-arch 2.6.38-ARCH #1 SMP PREEMPT Tue May 3 07:40:34 CEST 2011 x86_64
[ 67.987] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 radeon.modeset=0 ro
[ 67.987] Build Date: 16 April 2011 12:02:01PM
[ 67.987]
[ 67.987] Current version of pixman: 0.20.2
[ 67.987] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 67.988] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 67.989] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 8 21:35:31 2011
[ 68.004] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 68.017] (==) No Layout section. Using the first Screen section.
[ 68.017] (**) |-->Screen "Screen0" (0)
[ 68.017] (**) | |-->Monitor "Monitor0"
[ 68.017] (**) | |-->Device "Device0"
[ 68.017] (==) Automatically adding devices
[ 68.017] (==) Automatically enabling devices
[ 68.039] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 68.039] Entry deleted from font path.
[ 68.039] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 68.039] Entry deleted from font path.
[ 68.054] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 68.054] Entry deleted from font path.
[ 68.054] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 68.054] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 68.054] Entry deleted from font path.
[ 68.054] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 68.054] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/
[ 68.054] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 68.054] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 68.054] (II) Loader magic: 0x7d6fa0
[ 68.054] (II) Module ABI versions:
[ 68.054] X.Org ANSI C Emulation: 0.4
[ 68.054] X.Org Video Driver: 10.0
[ 68.054] X.Org XInput driver : 12.2
[ 68.054] X.Org Server Extension : 5.0
[ 68.055] (--) PCI:*(0:1:0:0) 1002:6719:1002:0b00 rev 0, Mem @ 0xc0000000/268435456, 0xfe620000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 68.055] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 68.055] (II) LoadModule: "extmod"
[ 68.055] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 68.069] (II) Module extmod: vendor="X.Org Foundation"
[ 68.069] compiled for 1.10.1, module version = 1.0.0
[ 68.069] Module class: X.Org Server Extension
[ 68.069] ABI class: X.Org Server Extension, version 5.0
[ 68.069] (II) Loading extension MIT-SCREEN-SAVER
[ 68.069] (II) Loading extension XFree86-VidModeExtension
[ 68.069] (II) Loading extension XFree86-DGA
[ 68.069] (II) Loading extension DPMS
[ 68.069] (II) Loading extension XVideo
[ 68.069] (II) Loading extension XVideo-MotionCompensation
[ 68.069] (II) Loading extension X-Resource
[ 68.069] (II) LoadModule: "dbe"
[ 68.069] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 68.070] (II) Module dbe: vendor="X.Org Foundation"
[ 68.070] compiled for 1.10.1, module version = 1.0.0
[ 68.070] Module class: X.Org Server Extension
[ 68.070] ABI class: X.Org Server Extension, version 5.0
[ 68.070] (II) Loading extension DOUBLE-BUFFER
[ 68.070] (II) LoadModule: "glx"
[ 68.070] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 68.086] (II) Module glx: vendor="X.Org Foundation"
[ 68.086] compiled for 1.10.1, module version = 1.0.0
[ 68.086] ABI class: X.Org Server Extension, version 5.0
[ 68.086] (==) AIGLX enabled
[ 68.086] (II) Loading extension GLX
[ 68.087] (II) LoadModule: "record"
[ 68.087] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 68.088] (II) Module record: vendor="X.Org Foundation"
[ 68.088] compiled for 1.10.1, module version = 1.13.0
[ 68.088] Module class: X.Org Server Extension
[ 68.088] ABI class: X.Org Server Extension, version 5.0
[ 68.088] (II) Loading extension RECORD
[ 68.088] (II) LoadModule: "dri"
[ 68.088] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 68.095] (II) Module dri: vendor="X.Org Foundation"
[ 68.095] compiled for 1.10.1, module version = 1.0.0
[ 68.095] ABI class: X.Org Server Extension, version 5.0
[ 68.095] (II) Loading extension XFree86-DRI
[ 68.095] (II) LoadModule: "dri2"
[ 68.095] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 68.096] (II) Module dri2: vendor="X.Org Foundation"
[ 68.096] compiled for 1.10.1, module version = 1.2.0
[ 68.096] ABI class: X.Org Server Extension, version 5.0
[ 68.096] (II) Loading extension DRI2
[ 68.096] (II) LoadModule: "radeon"
[ 68.132] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 68.173] (II) Module radeon: vendor="X.Org Foundation"
[ 68.173] compiled for 1.10.0, module version = 6.14.1
[ 68.173] Module class: X.Org Video Driver
[ 68.173] ABI class: X.Org Video Driver, version 10.0
[ 68.175] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS
[ 68.177] (--) using VT number 7
[ 68.179] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 68.179] (II) [KMS] drm report modesetting isn't supported.
[ 68.179] (II) RADEON(0): TOTO SAYS 00000000fe620000
[ 68.179] (II) RADEON(0): MMIO registers at 0x00000000fe620000: size 128KB
[ 68.179] (II) RADEON(0): PCI bus 1 card 0 func 0
[ 68.179] (**) RADEON(0): Depth 16, (--) framebuffer bpp 16
[ 68.179] (II) RADEON(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
[ 68.180] (==) RADEON(0): Default visual is TrueColor
[ 68.180] (II) Loading sub module "vgahw"
[ 68.180] (II) LoadModule: "vgahw"
[ 68.180] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 68.194] (II) Module vgahw: vendor="X.Org Foundation"
[ 68.194] compiled for 1.10.1, module version = 0.1.0
[ 68.194] ABI class: X.Org Video Driver, version 10.0
[ 68.194] (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 68.194] (==) RADEON(0): RGB weight 565
[ 68.194] (II) RADEON(0): Using 6 bits per RGB (8 bit DAC)
[ 68.194] (--) RADEON(0): Chipset: "AMD Radeon HD 6900 Series" (ChipID = 0x6719)
[ 68.195] (EE) RADEON(0): Chipset: "AMD Radeon HD 6900 Series" (ChipID = 0x6719) requires KMS
[ 68.195] (II) UnloadModule: "radeon"
[ 68.195] (II) Unloading radeon
[ 68.195] (II) UnloadModule: "vgahw"
[ 68.195] (II) Unloading vgahw
[ 68.195] (EE) Screen(s) found, but none have a usable configuration.
[ 68.195]
Fatal server error:
[ 68.195] no screens found
[ 68.195]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 68.195] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 68.195]
OR in the last lines:
[ 68.194] compiled for 1.10.1, module version = 0.1.0
[ 68.194] ABI class: X.Org Video Driver, version 10.0
[ 68.194] (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 68.194] (==) RADEON(0): RGB weight 565
[ 68.194] (II) RADEON(0): Using 6 bits per RGB (8 bit DAC)
[ 68.194] (--) RADEON(0): Chipset: "AMD Radeon HD 6900 Series" (ChipID = 0x6719)
[ 68.195] (EE) RADEON(0): Chipset: "AMD Radeon HD 6900 Series" (ChipID = 0x6719) requires KMS
[ 68.195] (II) UnloadModule: "radeon"
[ 68.195] (II) Unloading radeon
[ 68.195] (II) UnloadModule: "vgahw"
[ 68.195] (II) Unloading vgahw
[ 68.195] (EE) Screen(s) found, but none have a usable configuration.
[ 68.195]
Fatal server error:
[ 68.195] no screens found
BTW, I try to use 'radeon.modeset=0' in the boot, and same error..
What is the next step for me?

KingYes wrote:Hey,
I don't have OpenGL in this command.
Paste your glxinfo output via pastebin.com, dmesg may be usefull too...
dmesg
glxinfo

Database not start with srvctl command in rac 10g

hi
when i change parameter in sqlnet file
SQLNET.AUTHENTICATION_SERVICES= (NTS) to SQLNET.AUTHENTICATION_SERVICES= (NONE)
then database is not started with srvctl utillity but started with sqlplus enviroment.
please help in this issue

user521214 wrote:
hi,
we are implementing security policy for our client. our databas is on RAC . As per the security, we need to revoke sys dba priviliges. when i used SQLNET.AUTHENTICATION_SERVICES=(NTS) in sqlnet.ora or SQLNET.AUTHENTICATION_SERVICES=(NONE). the instance not start with the following command in rac 10g.
$srvctl start database -d abc
$ crs_stat -t
Name Type Target State Host
ora.db.db application OFFLINE OFFLINE
ora....b1.inst application ONLINE OFFLINE hosttest01
Edited by: user521214 on Apr 21, 2011 4:08 AMIs this the only parameter you changed? What happens when you undo this modification?
What do you see on log files?

Error:cannot backup SPFILE because the instance was not started with SPFILE

I get the following error message, what I have done wrong?
Starting backup at 27-JUN-08
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 06/27/2008 10:11:54
RMAN-06062: can not backup SPFILE because the instance was not started with SPFILE
Best Regards,
Fan

Show parameter pfile/spfile will not show you contents of pfile , for seeing contents you will have to show parameter with required parama name.
show parameter log_archive_dest
Whenever you start database ostartup first by default use spfile$Oracle_Sid.ora for starting the instance if this spfile does not exist then it goes for spfile.ora if spfile.ora also does not exist then it search init$Oracle_Sid.ora in default location.
As you created spfile after restarting the database will automatically use spfile and will show you spfile in yours param when you will show parameter spfile if it does not show then you are still using pfile
SQL> startup pfile='C:\oracle\product\10.1.0\admin\lease\pfile\init.ora.5242008172537'
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size                   787988 bytes
Variable Size             145488364 bytes
Database Buffers           25165824 bytes
Redo Buffers                 524288 bytes
Database mounted.
Database opened.
SQL> show parameter pfile
NAME                                 TYPE        VALUE
spfile                               string
SQL> create spfile from pfile
2 /
File created.
SQL> show parameter pfile
NAME                                 TYPE        VALUE
spfile                               string
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size                   787988 bytes
Variable Size             145488364 bytes
Database Buffers           25165824 bytes
Redo Buffers                 524288 bytes
Database mounted.
Database opened.
SQL> show parameter pfile
NAME                                 TYPE        VALUE
spfile                               string      C:\ORACLE\PRODUCT\10.1.0\DB_2\
                                                 DATABASE\SPFILELEASE.ORA
SQL>

Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.

Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
Thanks

Step by step, how did you arrive at seeing this agreement?

New Note 790189.1 - Oracle Clusterware and Application Failover Management

Hi all,
please, note the newly created Metalink Note 790189.1 - Oracle Clusterware and Application Failover Management if you want to use Oracle Clusterware as a general purpose cluster solution. The note intends to clarify and to explain the current situation in regards to the supportability of applications managed by Oracle Clusterware.
In environments not including Oracle RAC, Oracle Clusterware still provides the level of high availability that is commonly known to be achievable for applications and databases managed in (failover) cluster environments. These environments can include Oracle Single Instance Databases, Oracle Application Servers, Oracle Enterprise Manager components, third party databases, or any other kind of application. (For more information on Oracle Clusterware 11g in general, please, refer to [Oracle Clusterware homepage|http://otn.oracle.com/clusterware].)
Metalink Note 790189.1 - Oracle Clusterware and Application Failover Management is tightly integrated with the information on application failover management available on the [Oracle Clusterware homepage|http://otn.oracle.com/clusterware] and discusses typical questions like
* Terminology
* Script supportability and preconfigured agents
* How to prove that action scripts work outside of Oracle Clusterware
* Supportability of the Oracle Database Single Instance example scripts
* How do I know whether a certain script is supported as a preconfigured agent?
Metalink Note 790189.1, however, does not change the level of support that has been introduced for these kind of configurations as of Oracle Database 10g Release 2: "Generally, Oracle does not support action scripts in the strict terms of supporting individual code fragments. Oracle fully supports the integration of individual action scripts proven to run outside of Oracle Clusterware into the Oracle Clusterware management stack. Supported operations therefore typically involve crs_* commands such as crs_profile, crs_register, crs_setperm, crs_getperm, crs_start, crs_stop, and crs_relocate invoked on custom resources. If actions scripts are used as part of a preconfigured agent, Oracle or the application provider who provides the agent will support the integration of this agent, while only the application provider will provide support for the individual action scripts."
Just for your information. Thanks,
Markus

not meant to be a question - rather an announcement.

Iphoto crashes so tried the Alt start with new library and that worked. So now what? How to I get back to my pictures.

Iphoto crashes so tried the Alt start with new library and that worked. So now what? How to I get back to my pictures.

That shows you that iPhoto is working correctly and whatever issue you are having is based in your original library.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

SQL Developer 3.0.04 generated scripts not compatible with Oracle 10g (XE)

HI,
I tried to do an export from one XE database (still 10g) to another XE database. (also 10g).
I tried to do a database copy as well as a separate export and import (by loading the file and running as a script).
Neither of them work without modifying the files as it seems that SQL Developer generates scripts that are only compatible with Oracle 11g.
- Create table contains "segment creation automatic"
- Storage clauses contain parts that are not compatible with 10g
I ran through the wizard several times but neither can I find an option to choose for compatibility with earlier versions of Oracle.
Checked the preferences screen as well.
Is this a well hidden option or is it not possible to make this work for 10g.
Extra : found workaround by removing the storage clause to the export. Is there another way that does not force me to remove the storage clause?
Edited by: kcaluwae on 24-jun-2011 6:03

I'm sure this is far from the supported way to fix this but, seeing that it's apparently an issue with the classpath or something in it, I hacked <sqldeveloper_install>\sqldeveloper\bin\sqldeveloper.bat and added [ORACLE_HOME]\jdbc\lib\ojdbc6.jar to the classpath. At least that gets me started with 3.0 and lets me create TNS connections.
I'd really appreciate a better solution, if any of you kind folks knows of something.
Thanks,
Kelly

DB is not starting with spfile .

Hi ,
i am running DB (10.2.0.4) DB on solaris.x64 platform.
When i started the database after install , its giving error as
SQL> startup
ORA-00064: object is too large to allocate on this O/S (1,3994560)
I checked the sga_target size in spfile , which is set to (729145600 bytes ~ 595 M)
When installed another DB with sga_target size as 412 M
and started the DB it gives follwing error .
SQL> startup
SQL> ORA-00821: Specified value of sga_target 412M is too small, needs to be at least 552M
if i start the same DB with pfile where sga_target has set to 1632 M , the DB is starting successfully.
My question is if it is starting with this higher value of sga_target in with pfile , why it is not starting with a lesser value.

Cause: The specified value of sga_target is too small for the SGA to accommodate all of the necessary SGA components such as the log buffer, buffer pools, shared pool, etc.
Action: Set sga_target to the recommended value or reduce the values of any SGA component size parameters you have specified.
The previous solutions where correct, but if you're not providing a full path on the "CREATE SPFILE" make sure you have defined the parameter SPFILE. Otherwise you'll get the SPFILE created on $ORACLE_HOME/dbs/spfileDBNAME.ora
Regards,
Enric Moya

Problem with Starting with Oracle Warehouse Builder 11g Release 1

Hello,
I want to do the training modules for owb. I installed Oracle Databes 11g2 and was attempting to load all the demo files from the learning module Starting with Oracle Warehouse Builder 11g Release 1 (http://st-curriculum.oracle.com/obe/db/11g/r1/owb/owb11g_update_getting_started_intro/lesson1/less1_start.htm)
I get an error during the running of the tcl scripts in omb plus. Everything works until the last files in which an object cannot be found. I get the following error:
OMB02923: Attribute TIMES_CAL_MONTH_CODE of group SALES of operator SALES_OUT does not exist.
The only reference i can find to this is in the load_sales.tcl file from the zip-file and i have no idea what is going wrong. As a result 5 mappings are missing in the end result (all LOAD_.. mappings)
Can anyone assist me with this problem and provide a solution?
thank you in advance

Additional information after looking at the tcl files and the data in OWB that was loaded.
The section where the error occurs connects two parts of a mapping, the OUTGRP1 and the SALES_OUT. THe SALES_OUT is based upon the cube Sales. This cube contains all the data that is being connected except for the 'TIMES_CAL_MONTH_CODE'. I have no idea based upon the code of the creation of the cube where they take the data from. None of the connected attributes is named specifically. The cube also contains the several groups, one of these is time. If you open the details of the group the list of input attributes lists the needed attribute but it is not listed seperatly like all the others that are connected for the mapping. Does anybody have an idea how to solve the problem based on this extra information and the code listed below.
Code connecting outgrp1 and sales_out:
OMBALTER MAPPING 'LOAD_SALES' \
ADD CONNECTION FROM ATTRIBUTE 'AMOUNT' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'AMOUNT' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT'\
ADD CONNECTION FROM ATTRIBUTE 'COST' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'COST' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT'\
ADD CONNECTION FROM ATTRIBUTE 'QUANTITY' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'QUANTITY' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT' \
ADD CONNECTION FROM ATTRIBUTE 'CHANNEL_SOURCE_ID' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'CHANNELS_SOURCE_ID' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT'\
ADD CONNECTION FROM ATTRIBUTE 'SUBCATEGORY_ID' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'PROMOTIONS_SOURCE_ID' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT'\
ADD CONNECTION FROM ATTRIBUTE 'PRODUCT_ID' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'PRODUCTS_SOURCE_ID' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT'\
ADD CONNECTION FROM ATTRIBUTE 'CITY_ID' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'CUSTOMERS_SOURCE_ID' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT' \
ADD CONNECTION FROM ATTRIBUTE 'FINISH_MONTH' OF GROUP 'OUTGRP1' OF OPERATOR 'AGGREGATOR' \
TO ATTRIBUTE 'TIMES_CAL_MONTH_CODE' OF GROUP 'SALES' OF OPERATOR 'SALES_OUT'
Code for creating the cube:
OMBCREATE CUBE 'SALES'\
SET PROPERTIES (BUSINESS_NAME, DESCRIPTION, DEPLOYMENT_OPTIONS)\
VALUES ('Sales Cube', 'Sales Cube', 'Deploy All')
OMBALTER CUBE 'SALES' ADD MEASURE 'AMOUNT'\
SET PROPERTIES (DATATYPE,PRECISION,SCALE,BUSINESS_NAME,DESCRIPTION)\
VALUES ('NUMBER',10,2,'Sales Amount','Sales Amount')
OMBALTER CUBE 'SALES' ADD MEASURE 'QUANTITY'\
SET PROPERTIES (DATATYPE,BUSINESS_NAME,DESCRIPTION)\
VALUES ('NUMBER','Sales Quantity','Sales Quantity')
OMBALTER CUBE 'SALES' ADD MEASURE 'COST'\
SET PROPERTIES (DATATYPE,PRECISION,SCALE,BUSINESS_NAME,DESCRIPTION)\
VALUES ('NUMBER',10,2,'Sales Cost','Sales Cost')
OMBALTER CUBE 'SALES' ADD DIMENSION_USE 'TIMES'\
SET REF LEVEL 'MONTH' OF DIMENSION 'TIMES' AT POSITION "1"
OMBALTER CUBE 'SALES' ADD DIMENSION_USE 'PRODUCTS'\
SET REF LEVEL 'PRODUCT' OF DIMENSION 'PRODUCTS' AT POSITION "2"
OMBALTER CUBE 'SALES' ADD DIMENSION_USE 'CHANNELS'\
SET REF LEVEL 'CHANNEL' OF DIMENSION 'CHANNELS' AT POSITION "3"
OMBALTER CUBE 'SALES' ADD DIMENSION_USE 'CUSTOMERS'\
SET REF LEVEL 'CITY' OF DIMENSION 'CUSTOMERS' AT POSITION "4"
OMBALTER CUBE 'SALES' ADD DIMENSION_USE 'PROMOTIONS'\
SET REF LEVEL 'SUBCATEGORY' OF DIMENSION 'PROMOTIONS' AT POSITION "5"
OMBALTER CUBE 'SALES' ADD COMPOSITE_DIMENSION 'SALES_COMP'\
SET REF DIMENSIONS ('PRODUCTS','CHANNELS','CUSTOMERS','PROMOTIONS');
OMBALTER CUBE 'SALES' IMPLEMENTED BY SYSTEM
puts "SALES defined"

Could not start the oracle service on local computer

Could not start the oracle service on local computer, did not return an error blah, blah.
I am running Oracle 9i r2 Windows, and have choosen to start my instances manually. When i start them up I get the above error message. But if I am a little patient the services do start up and all is fine, so far as i can see anyway.
I am curious to know why does this error message arise.
Thanks in anticipation
Fergus

To start the database in windows you have to start first the OracleService<SID> service.
These are the steps that you have to do at the command line:
NET START OracleService<SID>
SET ORACLE_SID=<database sid>
sqlplus /nolog
conn sys/password as sysdba
startupJoel Pérez
http://otn.oracle.com/experts

Instance not started with oracle 9i and solaris 9

Similar Messages

Maybe you are looking for