Instance number and minor number

hi
can somebody tell me what is actually instance number and what is the relationship between an instance number and minor number of a device .

I'm not 100% sure but my reading of it is:
Usually one has a 1:1 direct mapping of minor number to instance number, but this doesn't have to be the case.
The instance number is linked to your hardware device and say if you move its base address you will get a new instance number with the old one retained for the original address.
If you had 3 cards I think you would have instance No.s 0, 1, and 2.
The minor number can be anything YOU want it to be.
I have a situation where I have a card carrier with 3 cards mounted on it - I can only have one instance and I need to differentiate between the cards used - I use the minor number that is a part of the device handle and can be returned by using getminor from driver code.
As usual the Writing DD SUN book is all there is available.
Any further points - let me know.
Cheers.

Similar Messages

Excise Invoice number and Internal Number

Hello Friends
I have some queries ,I will be thankful to you if you could guide me, in understanding themu2026
1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice number
2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
3) When do we require updating of register ,is it done on daily bases, and how can we see the entries of RG23A part 1.
4) We have excise invoice number range of posted ,in process and cancel documents which is assigned to GRPO transaction type, while running J1I7 though we select last option part 1 posted and part 2 not posted, still the system shows the cancelled documents, How can I avoid the cancel documents
Thanks
Siddharth

1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice number
-->> Ex inv nbr will be entered based on the vendor ex invoice .. this is external nbr assignment
2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
--->> there is no relation between grpo vs. ex inv nbr
3) When do we require updating of register ,is it done on daily bases, and how can we see the entries of RG23A part 1.
>> u can see in J1I7 or thru table J_1IPART1
4) We have excise invoice number range of posted ,in process and cancel documents which is assigned to GRPO transaction type, while running J1I7 though we select last option part 1 posted and part 2 not posted, still the system shows the cancelled documents, How can I avoid the cancel documents
>> wait for others answers..

I have had adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?

I have had adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?

uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
for the installation file(s):
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

In order confirmation i need invoice number and delivery number.

Dear Experts,
I need invoice number and delivery number in order confirmation.
how can i get the delivery number an invoice number.
Program name: RVADOR01
Regards
Ahmed

Hi
In the Order confirmation Only sales order details will be there
You better write a PERFORM statement in Script and in the subroutine fetch the Delivery number and Invoice number with the following links and display them in script
LIPS-VGBEL = VBAK-VBELN
LIPS-VGPOS = VBAP-POSNR
VBRP-AUBEL = VBAK-VBELN
VBRP-AUPOS = VBAP-POSNR
You can also can use the VBFA table
using Prev doc type = C (order) and Subsequent doc type = J to get the Delivery
and Sunsequent type = M for getting the Invoice Number
see the sample code for subroutine
REPORT ZMPO1 .
form get_freight tables in_par structure itcsy out_par structure itcsy.
tables: ekko,konv,t685t.
data: begin of itab occurs 0,
         ebeln like ekko-ebeln,
         knumv like ekko-knumv,
       end of itab.
data: begin of itab1 occurs 0,
         knumv like konv-knumv,
         kposn like konv-kposn,
         kschl like konv-kschl,
         kbetr like konv-kbetr,
         waers like konv-waers,
         kwert like konv-kwert,
       end of itab1.
data: begin of iout occurs 0,
         kschl like konv-kschl,
         vtext like t685t-vtext,
         kbetr like konv-kbetr,
         kwert like konv-kwert,
       end of iout.
data v_po like ekko-ebeln.
read table in_par with key 'EKKO-EBELN'.
if sy-subrc = 0.
   v_po = in_par-value.
   select
     ebeln
     knumv
from ekko
into table itab
where ebeln = v_po.
if sy-subrc = 0.
    loop at itab.
      select
        knumv
        kposn
        kschl
        kbetr
        waers
        kwert
      into table itab1
      from konv
      where knumv = itab-knumv and
            kappl = 'M'.
    endloop.
    loop at itab1.
      if itab1-kposn <> 0.
        select single * from t685t
                          where kschl = itab1-kschl
                            and kappl = 'M'
                            and spras = 'EN'.
        iout-vtext = t685t-vtext.
        iout-kschl = itab1-kschl.
        iout-kbetr = itab1-kbetr.
        iout-kwert = itab1-kwert.
        append iout.
        clear iout.
      endif.
    endloop.
    sort itab1 by kposn.
    loop at iout.
      sort iout by kschl.
      if ( iout-kschl eq 'GSDC' OR
           iout-kschl eq 'GSFR' OR
           iout-kschl eq 'GSIR' ).
        at end of kschl.
          read table iout index sy-tabix.
          sum.
         write:/ iout-kschl,iout-vtext,iout-kwert.
      out_par-name = 'A1'.
      out_par-value = iout-vtext.
      append out_par.
      out_par-name = 'A2'.
      out_par-value = iout-kwert.
      append out_par.
          endat.
        endif.
      endloop.
    endif.
endif.
endform.
IN THE FORM I AM WRITING THIS CODE.
/:DEFINE &A1& = ' '
/:DEFINE &A2& = ' '
/:PERFORM GET_FREIGHT IN PROGRAM ZMFORM_PO1
/:USING &EKKO-EBELN&
/:CHANGING &A1&
/:CHANGING &A2&
/:ENDPERFORM
&A1&
&A2&
This Code is to be written in the PO form under ADDRESS window.
/:DEFINE &A1& = ' '
/:DEFINE &A2& = ' '
/:DEFINE &A3& = ' '
/:DEFINE &A4& = ' '
/:DEFINE &A5& = ' '
/:DEFINE &A6& = ' '
/:PERFORM GET_VENDOR IN PROGRAM ZMFORM_PO
/:USING &EKKO-EBELN&
/:CHANGING &A1&
/:CHANGING &A2&
/:CHANGING &A3&
/:CHANGING &A4&
/:CHANGING &A5&
/:CHANGING &A6&
/:ENDPERFORM
&A1&
&A2&
&A3&
&A4&
&A5&
&A6&
Regards
Anji

Invoice number and document number not printed in payment advice

Hello Gurus,
I am executing reprint check through transaction fch7, In that Invoice number and document number not printed in payment advice. I have created zscript for that and also assinged regup-belnr and regup-xblnr and used standard program RFFOUS_C.
other fields from regup table are displayed but above two mentioned fields are not displayed.
I even tried debugging standard RFFOUS_C prog, in that regup-belnr and regup-xblnr are coming but it is not printed on form.
With regards,
Vikram

Hi,
Debug you Zscript and check the invoice no and document no. Have assigned that script in FBZP..? check the which form is calling FCH7 in debugger mode..?
Rgds
Aeda.

Invoice Number and Document Number

Are Invoice Number and Document Number in FI AR same?
Dont they differ, I could find only one infoobject 0INV_DOC_NO relating to both.
Is there any seperate infoobject which gives the document number in 0FIAR_C03.
Please comment.
Thanks.

hi,
are you looking for clearing doc number ?
http://help.sap.com/saphelp_nw04s/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
0CLR_DOC_NO - source field BSID-AUGBL
hope this helps.

Additional Field in Vendor Master for PF Number and ESI Number

Hi Experts,
I have to maintain ESI Number and PF Number in Vendor Master, but no such field is available in vendor master or J1ID. Kindly suggest me the fields which I can use. We have to capture the ESI and PF Number of the vendor in case He is a subcontractor to us.
Regards
GR

Hi
You can looks for customer fields (ABAP developed fields). You have standard development available in SAP. See the below config path. It will help you and your abaper
spro>logistics General->bussiness partner->vendors->control--->adoption of customer's own master data fields.
With the help of help text available there you and your abaper can develop it with flow logic easily with minimum effort.
Hope it helps you
Regards
Antony

Fetch Sales order number and PO number from ship to party and sold to party

HI,
I need to get Sales order number and PO number
from ship to party and sold to party.
I have only ______sold to party and ship to party and req del date_______ in selection screen as mandatory
Please let me know
Sreekanth

Hi,
You can do this:-
SELECT VBELN FROM LIKP
INTO TABLE T_DELIVERIES
WHERE KUNNR = SHIP TO PARTY
AND     KUNAG = SOLD TO PARTY
AND LFDAT      = DEL DATE.
You will get a table containing the list of deliveries.
Use VBFA to get the sales orders from deliveries.
SELECT VBELV FROM VBFA
INTO TABLE T_SALESORDERS
WHERE VBTYP_N = 'J'
AND     VBELN = T_DELIVERIES-VBELN.
T_SALESORDERS WILL give you list of sales orders.
From Sales Orders you can get Purchase orders through EKKN Table.
Using EKKN pass T_SALESORDERS-VBELN and get corresponding EBELN.
Regards,
SUbhashini

Payment advices not picking accounting clerk phone number and fax number.

Hi,
We have executed payment program and payment advices got generated. But in the output it is printing everthing i.e accounting clerk name, vendor number and amount. But it is not filling the accounting clerk phone number and fax number even though we have maintained it in our customized transaction code. Will this values in the payment advices will be picked up from standard t.code OB05, there we don't have option to give these two values.
Can anyboday help me on this.
Regards,
Sree

goto accunt groups with screen layout,
after creating the group or existing group, double click on account management, in payment transactions make the required fields are required.
regards,

Query for Customer site Phone number and Fax number in Oracle Apps

Dear All,
Can anyone guide me how to write qurey for Customer site phone number and Fax number for Acive customers.
Thanks in advance.
Best Regards
NRC

Hi Team,
This is a shipping report in header level we have the customer information with site address. The requirement is along with site address we need to show the phone number and Fax number .For this we need to write the formula column.Thes are the comes through HZ parties only. I have no idea how to achieve this.
Best Regards
NRC

How to print a gift return label if only know the return number and order number

I have a macbook pro, it's a gift, and I want to return it. But at first time, I forgot to print the return label, now I know the order number and return number, when I click "Print return label", it appeared I need to sign in, but I don't have a apple ID

Call Apple sales and ask them. The number should be on your order receipt or look at the Contact Us link at the bottom right hand corner of this page.

Merging of Prodn Order number and operation number into the unloading point

Hi,
I am creating the production order using the Tcodes Co01 or co10 and my requirement is that after creating the production number and then when I open that one in the change mode using co02 Tcode the unloading point which is present in the Goods Receipt tab should come as a concatenation of order number and operation number .
Thanks for the help in advance.
Regards,
Venkat.

Hello Rachit,
The relation is as follows
AFKO-AUFPL (Routing number is Order header)
Use this routing number to get operations from AFVC
AFVC-VORNR gives operation number
AFVC-LTXA1 gives operation description
For sub-operations, VORNR will be sub-operation number, and AFVC-SUMNR for this sub-operation corresponds to the respective superior operation(refers to AFVC-APLZL).
AFVC-APLZL is a unique number for each operation.
Hope this helps. You can check with some existing/new orders as well.
let me know if you need anything about split operations as well.
Best Regards,
Subhakanth

Logic to Pull ECCN Number and License Number in SAP-GTS System

Hi,
Can anyone help me provide logic to get ECCN Number and License Number in GTS module,
Please provide table and fields which contains transaction data.
Regards,

Hi Ramu,
If a licence is assigned to an item, you can see it in the "Control" tab.
Regards,
Dave

Spefications for Pdt Name,Serial Number and Pdt Number not working in HPSA

HP technical support came and replaced a new motherboard on Feb 5, 2015. Also, I have not being accessing HPSA for quite some time now and I am not aware how long has this take place.
When I access HPSA, under System Information, only Product Name, Serial Number and Product Number are not mentioned.
I recently updated to the latest version of HPSA today(Feb 7, 2015), but it still can't read them.
What can be done so that HPSA can read them.
Please guide me accordingly.

Hi @aswann,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message after the weekend from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details)
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

Map BATCH number corresponding to ORDER number and Material number .

hi all,
i want to map the BATCH number corresponding to Material Number .
i searched tables MCHA which has two fields Material number and Batch number but it doenot have Order number.
so how can i get Batch number as in table AFPO/AFKO i have all these three fields batch/material/order numbers.
but the batch number column is blank for all .
and in case of table MCHA , these is assigned batch number to every Material number .
also i want to ask , either the Material number in both tables (MCHA AND AFPO) is same or different as i didnot found any relation to map these three field by other fields too.
so please suggest me the Possible way to resolve this .....
sunny

hi dsk,
thanks for your earliar reply,
actually iam working on sapscript there i want to add batch number ,but i am not able to clear my doubt from where i get this.
how can i map batch number with corresponding to PO num ber, '
in the report i used structure vbplp with field charg"(batch num).
also i want to know from which table i can get customer part number and Po number .
how can i add batch num ,..
from which table or with which field i can compare itr to get .
sunny

Instance number and minor number

Similar Messages

Maybe you are looking for